CoreSight June 2022

coresight@lists.linaro.org

10 participants
21 discussions

Re: [PATCH] perf cs-etm: Use swap() instead of open coding it

by Mathieu Poirier

[Adding James] Hi Jiapeng, On Fri, May 06, 2022 at 05:17:18PM +0800, Jiapeng Chong wrote: > Clean the following coccicheck warning: > > ./tools/perf/util/cs-etm.c:418:34-35: WARNING opportunity for swap(). > > Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> > Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> > --- > tools/perf/util/cs-etm.c | 9 ++------- > 1 file changed, 2 insertions(+), 7 deletions(-) > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c > index 8b95fb3c4d7b..0cb555cc766f 100644 > --- a/tools/perf/util/cs-etm.c > +++ b/tools/perf/util/cs-etm.c > @@ -406,18 +406,13 @@ struct cs_etm_packet_queue > static void cs_etm__packet_swap(struct cs_etm_auxtrace *etm, > struct cs_etm_traceid_queue *tidq) > { > - struct cs_etm_packet *tmp; > - > if (etm->synth_opts.branches || etm->synth_opts.last_branch || > - etm->synth_opts.instructions) { > + etm->synth_opts.instructions) > /* > * Swap PACKET with PREV_PACKET: PACKET becomes PREV_PACKET for > * the next incoming packet. > */ > - tmp = tidq->packet; > - tidq->packet = tidq->prev_packet; > - tidq->prev_packet = tmp; Those 3 lines have burned a lot of eyes... As far as I can remember the idea is simply to make sure that after that point, ->prev_packet is now set to ->packet in preparation for the next iteration. There is no point in setting ->packet to ->prev_packet. As such the following would work just fine: tidq->prev_packet = tidq->packet; ... but I will let James and Leo have a final say on that. > - } > + swap(tidq->packet, tidq->prev_packet); If we absolutely need to keep swapping the packets please add the header file where swap() is found. Thanks, Mathieu > } > > static void cs_etm__packet_dump(const char *pkt_string) > -- > 2.20.1.7.g153144c >

1 year, 10 months

[PATCH v2] coresight: configfs: Fix unload of configurations on module exit

by Mike Leach

Any loaded configurations must be correctly unloaded on coresight module exit, or issues can arise with nested locking in the configfs directory code if built with CONFIG_LOCKDEP. Prior to this patch, the preloaded configuration configfs directory entries were being unloaded by the recursive code in configfs_unregister_subsystem(). However, when built with CONFIG_LOCKDEP, this caused a nested lock warning, which was not mitigated by the LOCKDEP dependent code in fs/configfs/dir.c designed to prevent this, due to the different directory levels for the root of the directory being removed. As the preloaded (and all other) configurations are registered after configfs_register_subsystem(), we now explicitly unload them before the call to configfs_unregister_subsystem(). The new routine cscfg_unload_cfgs_on_exit() iterates through the load owner list to unload any remaining configurations that were not unloaded by the user before the module exits. This covers both the CSCFG_OWNER_PRELOAD and CSCFG_OWNER_MODULE owner types, and will be extended to cover future load owner types for CoreSight configurations. Applies to coresight/next Fixes: eb2ec49606c2 ("coresight: syscfg: Update load API for config loadable modules") Reported-by: Suzuki Poulose <suzuki.poulose(a)arm.com> Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- Changes since v1: Altered ordering of init of cscfg_mgr to ensure lists valid for potential exit path on error. --- .../hwtracing/coresight/coresight-syscfg.c | 72 ++++++++++++++++--- 1 file changed, 61 insertions(+), 11 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-syscfg.c b/drivers/hwtracing/coresight/coresight-syscfg.c index 11850fd8c3b5..050a32f7e439 100644 --- a/drivers/hwtracing/coresight/coresight-syscfg.c +++ b/drivers/hwtracing/coresight/coresight-syscfg.c @@ -1042,6 +1042,13 @@ static int cscfg_create_device(void) if (!cscfg_mgr) goto create_dev_exit_unlock; + /* initialise the cscfg_mgr structure */ + INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); + INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); + INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); + INIT_LIST_HEAD(&cscfg_mgr->load_order_list); + atomic_set(&cscfg_mgr->sys_active_cnt, 0); + /* setup the device */ dev = cscfg_device(); dev->release = cscfg_dev_release; @@ -1056,14 +1063,61 @@ static int cscfg_create_device(void) return err; } -static void cscfg_clear_device(void) +/* + * Loading and unloading is generally on user discretion. + * If exiting due to coresight module unload, we need to unload any configurations that remain, + * before we unregister the configfs intrastructure. + * + * Do this by walking the load_owner list and taking appropriate action, depending on the load + * owner type. + * + * called with the cscfg_mutex held + */ + +#define LOADABLE_MOD_ERR "cscfg: ERROR - a loadable module failed to unload configs on exit\n" + +static void cscfg_unload_cfgs_on_exit(void) { - struct cscfg_config_desc *cfg_desc; + struct cscfg_load_owner_info *owner_info = NULL; - mutex_lock(&cscfg_mutex); - list_for_each_entry(cfg_desc, &cscfg_mgr->config_desc_list, item) { - etm_perf_del_symlink_cscfg(cfg_desc); + while (!list_empty(&cscfg_mgr->load_order_list)) { + + /* remove in reverse order of loading */ + owner_info = list_last_entry(&cscfg_mgr->load_order_list, + struct cscfg_load_owner_info, item); + + /* action according to type */ + switch (owner_info->type) { + case CSCFG_OWNER_PRELOAD: + /* + * preloaded descriptors are statically allocated in + * this module - just need to unload dynamic items from + * csdev lists, and remove from configfs directories. + */ + pr_info("cscfg: unloading preloaded configurations\n"); + cscfg_unload_owned_cfgs_feats(owner_info); + break; + + case CSCFG_OWNER_MODULE: + /* + * this is an error - the loadable module must have been unloaded prior + * to the coresight module unload. Therefore that module has not + * correctly unloaded configs in its own exit code. + * Nothing to do other than emit an error string. + */ + pr_err(LOADABLE_MOD_ERR); + break; + } + + /* remove from load order list */ + list_del(&owner_info->item); } +} + +static void cscfg_clear_device(void) +{ + mutex_lock(&cscfg_mutex); + cscfg_unload_cfgs_on_exit(); cscfg_configfs_release(cscfg_mgr); device_unregister(cscfg_device()); mutex_unlock(&cscfg_mutex); @@ -1074,20 +1128,16 @@ int __init cscfg_init(void) { int err = 0; + /* create the device and init cscfg_mgr */ err = cscfg_create_device(); if (err) return err; + /* initialise configfs subsystem */ err = cscfg_configfs_init(cscfg_mgr); if (err) goto exit_err; - INIT_LIST_HEAD(&cscfg_mgr->csdev_desc_list); - INIT_LIST_HEAD(&cscfg_mgr->feat_desc_list); - INIT_LIST_HEAD(&cscfg_mgr->config_desc_list); - INIT_LIST_HEAD(&cscfg_mgr->load_order_list); - atomic_set(&cscfg_mgr->sys_active_cnt, 0); - /* preload built-in configurations */ err = cscfg_preload(THIS_MODULE); if (err) -- 2.17.1

1 year, 10 months

[PATCH 1/3] perf test: Shell - Limit to only run executable scripts in tests

by carsten.haitzler＠foss.arm.com

From: Carsten Haitzler <carsten.haitzler(a)arm.com> Perf test's shell runner will just run everything in the tests directory (as long as it's not another directory or does not begin with a dot), but sometimes you find files in there that are not shell scripts - perf.data output for example if you do some testing and then the next time you run perf test it tries to run these. Check the files are executable so they are actually intended to be test scripts and not just some "random junk" files there. Signed-off-by: Carsten Haitzler <carsten.haitzler(a)arm.com> --- tools/perf/tests/builtin-test.c | 4 +++- tools/perf/util/path.c | 14 +++++++++++++- tools/perf/util/path.h | 1 + 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c index fac3717d9ba1..3c34cb766724 100644 --- a/tools/perf/tests/builtin-test.c +++ b/tools/perf/tests/builtin-test.c @@ -296,7 +296,9 @@ static const char *shell_test__description(char *description, size_t size, #define for_each_shell_test(entlist, nr, base, ent) \ for (int __i = 0; __i < nr && (ent = entlist[__i]); __i++) \ - if (!is_directory(base, ent) && ent->d_name[0] != '.') + if (!is_directory(base, ent) && \ + is_executable_file(base, ent) && \ + ent->d_name[0] != '.') static const char *shell_tests__dir(char *path, size_t size) { diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c index caed0336429f..ce80b79be103 100644 --- a/tools/perf/util/path.c +++ b/tools/perf/util/path.c @@ -86,9 +86,21 @@ bool is_directory(const char *base_path, const struct dirent *dent) char path[PATH_MAX]; struct stat st; - sprintf(path, "%s/%s", base_path, dent->d_name); + snprintf(path, sizeof(path), "%s/%s", base_path, dent->d_name); if (stat(path, &st)) return false; return S_ISDIR(st.st_mode); } + +bool is_executable_file(const char *base_path, const struct dirent *dent) +{ + char path[PATH_MAX]; + struct stat st; + + snprintf(path, sizeof(path), "%s/%s", base_path, dent->d_name); + if (stat(path, &st)) + return false; + + return !S_ISDIR(st.st_mode) && (st.st_mode & S_IXUSR); +} diff --git a/tools/perf/util/path.h b/tools/perf/util/path.h index 083429b7efa3..d94902c22222 100644 --- a/tools/perf/util/path.h +++ b/tools/perf/util/path.h @@ -12,5 +12,6 @@ int path__join3(char *bf, size_t size, const char *path1, const char *path2, con bool is_regular_file(const char *file); bool is_directory(const char *base_path, const struct dirent *dent); +bool is_executable_file(const char *base_path, const struct dirent *dent); #endif /* _PERF_PATH_H */ -- 2.32.0

1 year, 10 months

[PATCH v10 00/10] Coresight: Add support for TPDM and TPDA

by Mao Jinlong

This series adds support for the trace performance monitoring and diagnostics hardware (TPDM and TPDA). It is composed of two major elements. a) Changes for original coresight framework to support for TPDM and TPDA. b) Add driver code for TPDM and TPDA. Introduction of changes for original coresight framework Support TPDM as new coresight source. Since only STM and ETM are supported as coresight source originally. TPDM is a newly added coresight source. We need to change the original way of saving coresight path to support more types source for coresight driver. The following patch is to add support more coresight sources. coresight: core: Use IDR for non-cpu bound sources' paths. Introduction of TPDM and TPDA TPDM - The trace performance monitoring and diagnostics monitor or TPDM in short serves as data collection component for various dataset types specified in the QPMDA(Qualcomm performance monitoring and diagnostics architecture) spec. The primary use case of the TPDM is to collect data from different data sources and send it to a TPDA for packetization, timestamping and funneling. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM TPDA - The trace performance monitoring and diagnostics aggregator or TPDA in short serves as an arbitration and packetization engine for the performance monitoring and diagnostics network as specified in the QPMDA (Qualcomm performance monitoring and diagnostics architecture) specification. The primary use case of the TPDA is to provide packetization, funneling and timestamping of Monitor data as specified in the QPMDA specification. The following patch is to add driver for TPDA. Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions The last patch of this series is a device tree modification, which add the TPDM and TPDA configuration to device tree for validating. ARM: dts: msm: Add coresight components for SM8250 ARM: dts: msm: Add tpdm mm/prng for sm8250 Once this series patches are applied properly, the tpdm and tpda nodes should be observed at the coresight path /sys/bus/coresight/devices e.g. /sys/bus/coresight/devices # ls -l | grep tpd tpda0 -> ../../../devices/platform/soc(a)0/6004000.tpda/tpda0 tpdm0 -> ../../../devices/platform/soc(a)0/6c08000.mm.tpdm/tpdm0 We can use the commands are similar to the below to validate TPDMs. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test The test data will be collected in the coresight sink which is enabled. If rwp register of the sink is keeping updating when do integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM to sink. There must be a tpda between tpdm and the sink. When there are some other trace event hw components in the same HW block with tpdm, tpdm and these hw components will connect to the coresight funnel. When there is only tpdm trace hw in the HW block, tpdm will connect to tpda directly. +---------------+ +-------------+ | tpdm@6c08000 | |tpdm@684C000 | +-------|-------+ +------|------+ | | +-------|-------+ | | funnel@6c0b000| | +-------|-------+ | | | +-------|-------+ | |funnel@6c2d000 | | +-------|-------+ | | | | +---------------+ | +----- tpda@6004000 -----------+ +-------|-------+ | +-------|-------+ |funnel@6005000 | +---------------+ This patch series depends on patch series "coresight: Add new API to allocate trace source ID values". https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220308205000.… Changes from V9: 1. Fix the error of TPDM yaml file. -- Rob Herring <robh(a)kernel.org> Mao Jinlong (10): coresight: core: Use IDR for non-cpu bound sources' paths. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions arm64: dts: qcom: sm8250: Add coresight components arm64: dts: qcom: sm8250: Add tpdm mm/prng .../testing/sysfs-bus-coresight-devices-tpdm | 13 + .../bindings/arm/qcom,coresight-tpda.yaml | 111 +++ .../bindings/arm/qcom,coresight-tpdm.yaml | 93 +++ MAINTAINERS | 2 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 671 ++++++++++++++++++ drivers/hwtracing/coresight/Kconfig | 23 + drivers/hwtracing/coresight/Makefile | 2 + drivers/hwtracing/coresight/coresight-core.c | 42 +- drivers/hwtracing/coresight/coresight-tpda.c | 206 ++++++ drivers/hwtracing/coresight/coresight-tpda.h | 35 + drivers/hwtracing/coresight/coresight-tpdm.c | 259 +++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 62 ++ include/linux/coresight.h | 1 + 13 files changed, 1508 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h -- 2.17.1

1 year, 10 months

[PATCH v9 00/10] Coresight: Add support for TPDM and TPDA

by Mao Jinlong

This series adds support for the trace performance monitoring and diagnostics hardware (TPDM and TPDA). It is composed of two major elements. a) Changes for original coresight framework to support for TPDM and TPDA. b) Add driver code for TPDM and TPDA. Introduction of changes for original coresight framework Support TPDM as new coresight source. Since only STM and ETM are supported as coresight source originally. TPDM is a newly added coresight source. We need to change the original way of saving coresight path to support more types source for coresight driver. The following patch is to add support more coresight sources. coresight: core: Use IDR for non-cpu bound sources' paths. Introduction of TPDM and TPDA TPDM - The trace performance monitoring and diagnostics monitor or TPDM in short serves as data collection component for various dataset types specified in the QPMDA(Qualcomm performance monitoring and diagnostics architecture) spec. The primary use case of the TPDM is to collect data from different data sources and send it to a TPDA for packetization, timestamping and funneling. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM TPDA - The trace performance monitoring and diagnostics aggregator or TPDA in short serves as an arbitration and packetization engine for the performance monitoring and diagnostics network as specified in the QPMDA (Qualcomm performance monitoring and diagnostics architecture) specification. The primary use case of the TPDA is to provide packetization, funneling and timestamping of Monitor data as specified in the QPMDA specification. The following patch is to add driver for TPDA. Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions The last patch of this series is a device tree modification, which add the TPDM and TPDA configuration to device tree for validating. ARM: dts: msm: Add coresight components for SM8250 ARM: dts: msm: Add tpdm mm/prng for sm8250 Once this series patches are applied properly, the tpdm and tpda nodes should be observed at the coresight path /sys/bus/coresight/devices e.g. /sys/bus/coresight/devices # ls -l | grep tpd tpda0 -> ../../../devices/platform/soc(a)0/6004000.tpda/tpda0 tpdm0 -> ../../../devices/platform/soc(a)0/6c08000.mm.tpdm/tpdm0 We can use the commands are similar to the below to validate TPDMs. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test The test data will be collected in the coresight sink which is enabled. If rwp register of the sink is keeping updating when do integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM to sink. There must be a tpda between tpdm and the sink. When there are some other trace event hw components in the same HW block with tpdm, tpdm and these hw components will connect to the coresight funnel. When there is only tpdm trace hw in the HW block, tpdm will connect to tpda directly. +---------------+ +-------------+ | tpdm@6c08000 | |tpdm@684C000 | +-------|-------+ +------|------+ | | +-------|-------+ | | funnel@6c0b000| | +-------|-------+ | | | +-------|-------+ | |funnel@6c2d000 | | +-------|-------+ | | | | +---------------+ | +----- tpda@6004000 -----------+ +-------|-------+ | +-------|-------+ |funnel@6005000 | +---------------+ This patch series depends on patch series "coresight: Add new API to allocate trace source ID values". https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220308205000.… Changes from V8: 1. Rename yaml file for TPDM/TPDA and fix the error for the yaml files. -- Rob Herring <robh(a)kernel.org> Mao Jinlong (10): coresight: core: Use IDR for non-cpu bound sources' paths. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions arm64: dts: qcom: sm8250: Add coresight components arm64: dts: qcom: sm8250: Add tpdm mm/prng .../testing/sysfs-bus-coresight-devices-tpdm | 13 + .../bindings/arm/qcom,coresight-tpda.yaml | 110 +++ .../bindings/arm/qcom,coresight-tpdm.yaml | 92 +++ MAINTAINERS | 2 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 671 ++++++++++++++++++ drivers/hwtracing/coresight/Kconfig | 23 + drivers/hwtracing/coresight/Makefile | 2 + drivers/hwtracing/coresight/coresight-core.c | 42 +- drivers/hwtracing/coresight/coresight-tpda.c | 206 ++++++ drivers/hwtracing/coresight/coresight-tpda.h | 35 + drivers/hwtracing/coresight/coresight-tpdm.c | 259 +++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 62 ++ include/linux/coresight.h | 1 + 13 files changed, 1506 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h -- 2.17.1

1 year, 11 months

Re: [aarch64] [coresight_etm4x] [kernel 5.19.0-rc1] coresight-etm4x: probe of ARMHC500:20 failed with error -17

by Mathieu Poirier

CC'ing the coresight mailing list and maintainers. On Wed, Jun 08, 2022 at 03:20:12PM +0200, Bruno Goncalves wrote: > Hello, > > We recently started to hit this call trace when loading the > coresight-etm4x module. > > [ 78.683475] coresight etm103: CPU103: etm v4.1 initialized > [ 78.683645] sysfs: cannot create duplicate filename > '/devices/system/container/ACPI0004:00/ARMHC9FE:00/funnel0/connections/in:0' > [ 78.683650] CPU: 17 PID: 2522 Comm: systemd-udevd Not tainted 5.19.0-rc1 #1 > [ 78.683653] Hardware name: HPE Apollo 70 /C01_APACHE_MB > , BIOS L50_5.13_1.16 07/29/2020 > [ 78.683655] Call trace: > [ 78.683657] dump_backtrace+0xc4/0x130 > [ 78.683665] show_stack+0x24/0x70 > [ 78.683668] dump_stack_lvl+0x64/0x80 > [ 78.683673] dump_stack+0x18/0x34 > [ 78.683676] sysfs_warn_dup+0x70/0x90 > [ 78.683681] sysfs_do_create_link_sd+0x13c/0x144 > [ 78.683683] sysfs_create_link_sd+0x20/0x30 > [ 78.683685] sysfs_add_link_to_group+0x48/0x74 > [ 78.683688] coresight_add_sysfs_link+0xa4/0x114 [coresight] > [ 78.683705] coresight_make_links+0x98/0xdc [coresight] > [ 78.683714] coresight_register+0x1d4/0x3cc [coresight] > [ 78.683721] etm4_probe+0x1e0/0x334 [coresight_etm4x] > [ 78.683729] etm4_probe_amba+0x44/0xa0 [coresight_etm4x] > [ 78.683735] amba_probe+0x11c/0x1b0 > [ 78.683741] really_probe+0x19c/0x3f0 > [ 78.683747] __driver_probe_device+0x11c/0x190 > [ 78.683749] driver_probe_device+0x44/0xf4 > [ 78.683753] __driver_attach+0xd8/0x1b4 > [ 78.683756] bus_for_each_dev+0x6c/0xb0 > [ 78.683758] driver_attach+0x30/0x40 > [ 78.683761] bus_add_driver+0x154/0x240 > [ 78.683763] driver_register+0x84/0x140 > [ 78.683765] amba_driver_register+0x30/0x44 > [ 78.683768] etm4x_init+0xd8/0x1000 [coresight_etm4x] > [ 78.683775] do_one_initcall+0x40/0x220 > [ 78.683778] do_init_module+0x50/0x1f4 > [ 78.683782] load_module+0x940/0xaf0 > [ 78.683783] __do_sys_finit_module+0x9c/0xfc > [ 78.683785] __arm64_sys_finit_module+0x2c/0x40 > [ 78.683787] invoke_syscall+0x50/0x120 > [ 78.683790] el0_svc_common.constprop.0+0xd4/0xf4 > [ 78.683792] do_el0_svc+0x38/0x4c > [ 78.683794] el0_svc+0x34/0xd0 > [ 78.683797] el0t_64_sync_handler+0x11c/0x150 > [ 78.683799] el0t_64_sync+0x190/0x194 > [ 78.725063] coresight-etm4x: probe of ARMHC500:20 failed with error -17 > > console log: https://s3.us-east-1.amazonaws.com/arr-cki-prod-datawarehouse-public/datawa… > > more logs: https://datawarehouse.cki-project.org/kcidb/tests/3797753 > cki issue tracker: https://datawarehouse.cki-project.org/issue/1261 > > kernel config: http://s3.amazonaws.com/arr-cki-prod-datawarehouse-public/datawarehouse-pub… > > Thanks, > Bruno Goncalves > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel(a)lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

1 year, 11 months

[PATCH v8 00/10] Coresight: Add support for TPDM and TPDA

by Mao Jinlong

This series adds support for the trace performance monitoring and diagnostics hardware (TPDM and TPDA). It is composed of two major elements. a) Changes for original coresight framework to support for TPDM and TPDA. b) Add driver code for TPDM and TPDA. Introduction of changes for original coresight framework Support TPDM as new coresight source. Since only STM and ETM are supported as coresight source originally. TPDM is a newly added coresight source. We need to change the original way of saving coresight path to support more types source for coresight driver. The following patch is to add support more coresight sources. coresight: core: Use IDR for non-cpu bound sources' paths. Introduction of TPDM and TPDA TPDM - The trace performance monitoring and diagnostics monitor or TPDM in short serves as data collection component for various dataset types specified in the QPMDA(Qualcomm performance monitoring and diagnostics architecture) spec. The primary use case of the TPDM is to collect data from different data sources and send it to a TPDA for packetization, timestamping and funneling. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM TPDA - The trace performance monitoring and diagnostics aggregator or TPDA in short serves as an arbitration and packetization engine for the performance monitoring and diagnostics network as specified in the QPMDA (Qualcomm performance monitoring and diagnostics architecture) specification. The primary use case of the TPDA is to provide packetization, funneling and timestamping of Monitor data as specified in the QPMDA specification. The following patch is to add driver for TPDA. Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions The last patch of this series is a device tree modification, which add the TPDM and TPDA configuration to device tree for validating. ARM: dts: msm: Add coresight components for SM8250 ARM: dts: msm: Add tpdm mm/prng for sm8250 Once this series patches are applied properly, the tpdm and tpda nodes should be observed at the coresight path /sys/bus/coresight/devices e.g. /sys/bus/coresight/devices # ls -l | grep tpd tpda0 -> ../../../devices/platform/soc(a)0/6004000.tpda/tpda0 tpdm0 -> ../../../devices/platform/soc(a)0/6c08000.mm.tpdm/tpdm0 We can use the commands are similar to the below to validate TPDMs. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test The test data will be collected in the coresight sink which is enabled. If rwp register of the sink is keeping updating when do integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM to sink. There must be a tpda between tpdm and the sink. When there are some other trace event hw components in the same HW block with tpdm, tpdm and these hw components will connect to the coresight funnel. When there is only tpdm trace hw in the HW block, tpdm will connect to tpda directly. +---------------+ +-------------+ | tpdm@6c08000 | |tpdm@684C000 | +-------|-------+ +------|------+ | | +-------|-------+ | | funnel@6c0b000| | +-------|-------+ | | | +-------|-------+ | |funnel@6c2d000 | | +-------|-------+ | | | | +---------------+ | +----- tpda@6004000 -----------+ +-------|-------+ | +-------|-------+ |funnel@6005000 | +---------------+ This patch series depends on patch series "coresight: Add new API to allocate trace source ID values". https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220308205000.… Changes from V7: 1. Use spinlock to protect drvdata of TPDM/TPDA -- Suzuki K Poulose <suzuki.poulose(a)arm.com> 2. Use CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS as source type for TPDM -- Suzuki K Poulose <suzuki.poulose(a)arm.com> 3. Fix the warning for yaml file of TPDM/TPDA -- Rob Herring <robh(a)kernel.org> Mao Jinlong (10): coresight: core: Use IDR for non-cpu bound sources' paths. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions arm64: dts: qcom: sm8250: Add coresight components arm64: dts: qcom: sm8250: Add tpdm mm/prng .../testing/sysfs-bus-coresight-devices-tpdm | 13 + .../bindings/arm/coresight-tpda.yaml | 100 +++ .../bindings/arm/coresight-tpdm.yaml | 99 +++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 671 ++++++++++++++++++ drivers/hwtracing/coresight/Kconfig | 23 + drivers/hwtracing/coresight/Makefile | 2 + drivers/hwtracing/coresight/coresight-core.c | 42 +- drivers/hwtracing/coresight/coresight-tpda.c | 206 ++++++ drivers/hwtracing/coresight/coresight-tpda.h | 35 + drivers/hwtracing/coresight/coresight-tpdm.c | 259 +++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 62 ++ include/linux/coresight.h | 1 + 14 files changed, 1510 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpda.yaml create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpdm.yaml create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h -- 2.17.1

1 year, 11 months

[PATCH v2 1/2] coresight: etm4x: Expose default timestamp source in sysfs

by German Gomez

Add a new sysfs interface in /sys/bus/coresight/devices/etm<N>/ts_source indicating the configured timestamp source when the ETM device driver was probed. The perf tool will use this information to detect if the trace data timestamp matches the kernel time, enabling correlation of CoreSight trace with perf events. Suggested-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> Signed-off-by: German Gomez <german.gomez(a)arm.com> Reviewed-by: Leo Yan <leo.yan(a)linaro.org> --- v1: - https://lore.kernel.org/all/20220429123100.268059-2-german.gomez@arm.com/ v2: - Inline etmv4_to_ts_source() function. - Collect review tag from Leo. --- arch/arm64/include/asm/sysreg.h | 1 + .../coresight/coresight-etm4x-sysfs.c | 29 +++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 38508e507d73a..263a7bee06f9a 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -1146,6 +1146,7 @@ #define SYS_MPIDR_SAFE_VAL (BIT(31)) #define TRFCR_ELx_TS_SHIFT 5 +#define TRFCR_ELx_TS_MASK ((0x3UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_VIRTUAL ((0x1UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_GUEST_PHYSICAL ((0x2UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_PHYSICAL ((0x3UL) << TRFCR_ELx_TS_SHIFT) diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index a0640fa5c55bd..2a48827a4e135 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -2264,6 +2264,34 @@ static ssize_t cpu_show(struct device *dev, } static DEVICE_ATTR_RO(cpu); +static ssize_t ts_source_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + + if (!drvdata->trfcr) { + val = -1; + goto out; + } + + switch (drvdata->trfcr & TRFCR_ELx_TS_MASK) { + case TRFCR_ELx_TS_VIRTUAL: + case TRFCR_ELx_TS_GUEST_PHYSICAL: + case TRFCR_ELx_TS_PHYSICAL: + val = FIELD_GET(TRFCR_ELx_TS_MASK, drvdata->trfcr); + break; + default: + val = -1; + break; + } + +out: + return sysfs_emit(buf, "%d\n", val); +} +static DEVICE_ATTR_RO(ts_source); + static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_nr_pe_cmp.attr, &dev_attr_nr_addr_cmp.attr, @@ -2318,6 +2346,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_vmid_val.attr, &dev_attr_vmid_masks.attr, &dev_attr_cpu.attr, + &dev_attr_ts_source.attr, NULL, }; -- 2.25.1

1 year, 11 months

[PATCH v6 0/2] Add support for UltraSoc System Memory Buffer

by Qi Liu

Add support for UltraSoc System Memory Buffer. Change since v5: - Address the comments from Suzuki, add some comments in SMB document, and modify configuration of "drvdata->reading", to void problems in multi-core concurrency scenario - https://lore.kernel.org/linux-arm-kernel/20220416083953.52610-1-liuqi115@hu… Change since v4: - Add a simple document of SMB driver according to Suzuki's comment. - Address the comments from Suzuki. - https://lore.kernel.org/linux-arm-kernel/20220128061755.31909-1-liuqi115@hu… Change since v3: - Modify the file header according to community specifications. - Address the comments from Mathieu. - Link:https://lore.kernel.org/linux-arm-kernel/20211118110016.40398-1-liuqi1… Change since v2: - Move ultrasoc driver to drivers/hwtracing/coresight. - Link:https://lists.linaro.org/pipermail/coresight/2021-November/007310.html Change since v1: - Drop the document of UltraSoc according to Mathieu's comment. - Add comments to explain some private hardware settings. - Address the comments from Mathieu. - Link: https://lists.linaro.org/pipermail/coresight/2021-August/006842.html Change since RFC: - Move driver to drivers/hwtracing/coresight/ultrasoc. - Remove ultrasoc-axi-com.c, as AXI-COM doesn't need to be configured in basic tracing function. - Remove ultrasoc.c as SMB does not need to register with the ultrasoc core. - Address the comments from Mathieu and Suzuki. - Link: https://lists.linaro.org/pipermail/coresight/2021-June/006535.html Qi Liu (2): drivers/coresight: Add UltraSoc System Memory Buffer driver Documentation: Add document for UltraSoc SMB drivers .../trace/coresight/ultrasoc-smb.rst | 80 +++ drivers/hwtracing/coresight/Kconfig | 10 + drivers/hwtracing/coresight/Makefile | 1 + drivers/hwtracing/coresight/ultrasoc-smb.c | 663 ++++++++++++++++++ drivers/hwtracing/coresight/ultrasoc-smb.h | 110 +++ 5 files changed, 864 insertions(+) create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h -- 2.24.0

1 year, 11 months

[PATCH v7 00/10] Coresight: Add support for TPDM and TPDA

by Mao Jinlong

This series adds support for the trace performance monitoring and diagnostics hardware (TPDM and TPDA). It is composed of two major elements. a) Changes for original coresight framework to support for TPDM and TPDA. b) Add driver code for TPDM and TPDA. Introduction of changes for original coresight framework Support TPDM as new coresight source. Since only STM and ETM are supported as coresight source originally. TPDM is a newly added coresight source. We need to change the original way of saving coresight path to support more types source for coresight driver. The following patch is to add support more coresight sources. coresight: core: Use IDR for non-cpu bound sources' paths. Introduction of TPDM and TPDA TPDM - The trace performance monitoring and diagnostics monitor or TPDM in short serves as data collection component for various dataset types specified in the QPMDA(Qualcomm performance monitoring and diagnostics architecture) spec. The primary use case of the TPDM is to collect data from different data sources and send it to a TPDA for packetization, timestamping and funneling. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM TPDA - The trace performance monitoring and diagnostics aggregator or TPDA in short serves as an arbitration and packetization engine for the performance monitoring and diagnostics network as specified in the QPMDA (Qualcomm performance monitoring and diagnostics architecture) specification. The primary use case of the TPDA is to provide packetization, funneling and timestamping of Monitor data as specified in the QPMDA specification. The following patch is to add driver for TPDA. Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions The last patch of this series is a device tree modification, which add the TPDM and TPDA configuration to device tree for validating. ARM: dts: msm: Add coresight components for SM8250 ARM: dts: msm: Add tpdm mm/prng for sm8250 Once this series patches are applied properly, the tpdm and tpda nodes should be observed at the coresight path /sys/bus/coresight/devices e.g. /sys/bus/coresight/devices # ls -l | grep tpd tpda0 -> ../../../devices/platform/soc(a)0/6004000.tpda/tpda0 tpdm0 -> ../../../devices/platform/soc(a)0/6c08000.mm.tpdm/tpdm0 We can use the commands are similar to the below to validate TPDMs. Enable coresight sink first. echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test The test data will be collected in the coresight sink which is enabled. If rwp register of the sink is keeping updating when do integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM to sink. There must be a tpda between tpdm and the sink. When there are some other trace event hw components in the same HW block with tpdm, tpdm and these hw components will connect to the coresight funnel. When there is only tpdm trace hw in the HW block, tpdm will connect to tpda directly. +---------------+ +-------------+ | tpdm@6c08000 | |tpdm@684C000 | +-------|-------+ +------|------+ | | +-------|-------+ | | funnel@6c0b000| | +-------|-------+ | | | +-------|-------+ | |funnel@6c2d000 | | +-------|-------+ | | | | +---------------+ | +----- tpda@6004000 -----------+ +-------|-------+ | +-------|-------+ |funnel@6005000 | +---------------+ This patch series depends on patch series "coresight: Add new API to allocate trace source ID values". https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220308205000.… Changes from V6: 1. Update the commit title and move the changes to right place which is sorted by address for dtsi changes. -- Konrad Dybcio <konrad.dybcio(a)somainline.org> Mao Jinlong (10): coresight: core: Use IDR for non-cpu bound sources' paths. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support docs: sysfs: coresight: Add sysfs ABI documentation for TPDM Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions arm64: dts: qcom: sm8250: Add coresight components arm64: dts: qcom: sm8250: Add tpdm mm/prng .../testing/sysfs-bus-coresight-devices-tpdm | 13 + .../bindings/arm/coresight-tpda.yaml | 119 ++++ .../bindings/arm/coresight-tpdm.yaml | 99 +++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 658 ++++++++++++++++++ drivers/hwtracing/coresight/Kconfig | 24 + drivers/hwtracing/coresight/Makefile | 2 + drivers/hwtracing/coresight/coresight-core.c | 42 +- drivers/hwtracing/coresight/coresight-tpda.c | 201 ++++++ drivers/hwtracing/coresight/coresight-tpda.h | 33 + drivers/hwtracing/coresight/coresight-tpdm.c | 258 +++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 63 ++ include/linux/coresight.h | 1 + 14 files changed, 1510 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpda.yaml create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpdm.yaml create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h -- 2.17.1

1 year, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight June 2022