CoreSight

coresight@lists.linaro.org

3 participants
2696 discussions

perf-record: failed to set sink (Linux 5.5, possible regression)

by Wojciech Żmuda

Hello, I've found an issue that I believe is regression in the user space part of perf. I'm trying to use CoreSight with Linux 5.5.0-rc7 with perf application built from the same source. Previously, I have been using 5.1-rc4 for a couple of months successfully. The platform I use is Xilinx Zynq Ultrascale+, but I believe is not related to the problem. I managed to find a hacky way to fix the issue, but I don't fully understand the nature of the problem, so I decided to share my findings here with hope I can gain more knowledge or attract attention of somebody who already knows how to fix it. I've noticed it's not possible to start tracing session with perf-record anymore: root@zynq:/# /linux/tools/perf/perf record -e cs_etm/@tmc_etf0/u --per-thread true failed to set sink "" on event cs_etm/@tmc_etf0/u with 21 (Is a directory) Sink tmc_etf0 is present in the system.: root@zynq:/# ls -l /sys/bus/event_source/devices/cs_etm/sinks/ total 0 -r--r--r-- 1 root root 4096 Jan 27 14:31 tmc_etf0 -r--r--r-- 1 root root 4096 Jan 27 17:00 tmc_etf1 -r--r--r-- 1 root root 4096 Jan 27 13:24 tmc_etr0 -r--r--r-- 1 root root 4096 Jan 27 17:00 tpiu0 Regardless the sink string I provide, the error is always the same, always with the empty quote and "Is a directory" errno: root@zynq:/# /linux/tools/perf/perf record -e cs_etm/@this_obviously_does_not_exist/u --per-thread true failed to set sink "" on event cs_etm/@this_obviously_does_not_exist/u with 21 (Is a directory) I discovered that the error is generated by this function in tools/perf/arch/arm/util/cs-etm.c: static int cs_etm_set_sink_attr(struct perf_pmu *pmu, struct evsel *evsel) { char msg[BUFSIZ], path[PATH_MAX], *sink; struct perf_evsel_config_term *term; int ret = -EINVAL; u32 hash; if (evsel->core.attr.config2 & GENMASK(31, 0)) return 0; list_for_each_entry(term, &evsel->config_terms, list) { if (term->type != PERF_EVSEL__CONFIG_TERM_DRV_CFG) continue; sink = term->val.drv_cfg; snprintf(path, PATH_MAX, "sinks/%s", sink); ret = perf_pmu__scan_file(pmu, path, "%x", &hash); if (ret != 1) { pr_err("failed to set sink \"%s\" on event %s with %d (%s)\n", sink, perf_evsel__name(evsel), errno, str_error_r(errno, msg, sizeof(msg))); return ret; } evsel->core.attr.config2 |= hash; return 0; } The problem occurs because perf_pmu__scan_file() cannot open the file path built by snprintf(). Specifically, char* sink points to an empty string, resulting in sink path leading to the sinks/ directory in sysfs, skipping the file name of the sink. With git-bisect I narrowed the case down to the specific commit that might have introduced the problem: commit 1dc925568f015edfdbb89e20ad41755bb70538b9 Author: Ian Rogers <irogers(a)google.com> Date: Wed Oct 30 15:34:47 2019 -0700 perf parse: Add a deep delete for parse event terms Add a parse_events_term deep delete function so that owned strings and arrays are freed. After I revert this commit, tracing works properly. What the commit does, is to improve memory freeing of perf configuration. Specifically, it adds the following function that frees strings associated with specific config terms: +void parse_events_term__delete(struct parse_events_term *term) +{ + if (term->array.nr_ranges) + zfree(&term->array.ranges); + + if (term->type_val != PARSE_EVENTS__TERM_TYPE_NUM) + zfree(&term->val.str); + + zfree(&term->config); + free(term); +} Since the zfree(&term->val.str) part didn't exist prior to this commit, the cs_etm_set_sink_attr() function quoted above was able to determine proper sink file in sysfs. However, I analyzed the code further and I see nothing wrong with this part, as there is no other part that frees the string allocated memory. I believe then, that this commit revealed the already existing problem, rather than introduced it. I also noticed, that, before the CoreSight-specific code is looking for the sysfs sink file, terms objectsare duplicated along with their associated strings (in pmu.c:perf_pmu__check_alias()). I failed to understand what is the purpose of this behavior, however at later stage, still before CS-specific part, both the original lists of terms, the original and the duplicated one, are freed by this snippet in parse-events.y: parse_events_terms__delete($2); parse_events_terms__delete(orig_terms); free($1); $$ = list; #undef CLEANUP_YYABORT By analyzing pointers in gdb, I determined that the first parse_events_terms__delete() in this snippet frees the structure that is later retrieved by cs_etm_set_sink_attr(). In fact, instead of reverting the previously mentioned commit, removing the `parse_events_terms__delete($2);` makes perf-record work again. This line was introduced by: commit 4a35a9027f64d588d2fd9436dda4126e8d5647d7 Author: Arnaldo Carvalho de Melo <acme(a)redhat.com> Date: Mon May 7 15:27:01 2018 -0300 Revert "perf pmu: Fix pmu events parsing rule" At this point I'm not sure what actually is the nature of the problem: 1. It may be a problem with cs_etm_set_sink_attr(), as it shouldn't use the config_term list but obtain the name in a different manner. I investigated this path, but failed to find a smart way to do this other that to parse the string pointer by perf_evsel__name(evsel). 2. It may be a problem with the superfluous free in the parse-events.y file, and the removal of the first _delete() actually solves the issue. 3. The root cause is actually something else and I'm digging in the wrong direction. I'll be grateful for any suggestions that may help to understand and solve this issue. Best regards, Wojciech

6 years, 9 months

adding branch tracing and reverse debugging in GDB using Coresight etm traces

by zied guermazi

hiI am progressing in the implementation of the proposal "GDB process record and replay with ARM Coresight" https://lists.linaro.org/pipermail/coresight/2019-July/003021.html so far I was able to use perf events to configure the drivers for etm and collect the traces. the code was tested successfully on an STM32MP157A discovery kit (arm v7). and I can collect the traces from the perf mmapped aux area. For parsing them I needed to gather information about the cpu and etm registers. those are available in the events of type PERF_RECORD_AUXTRACE_INFO in the priv section. priv is a kind of "opaque" data structure where the layout is depending on the perf pmu drivers. the implementation of perf tool gives a good example to follow. I needed also to make a wrapper around opencsd library and again perf was offering a good example to follow. those are good reasons to think about factoring out the functionality of parsing etm traces on linux system in a dedicated library that can be reused by other software, a kind of libcoresightperf.is there any plan or ongoing activities for such a library? Kind RegardsZied Guermazi

6 years, 9 months

[PATCH v7 13/15] docs: coresight: Update documentation for CoreSight to cover CTI.

by Mike Leach

Add new document covering CTI / CTM usage in CoreSight. Add section in coresight.rst introducing CTI and CTM modules with link to new document. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> --- .../trace/coresight/coresight-ect.rst | 211 ++++++++++++++++++ Documentation/trace/coresight/coresight.rst | 13 ++ 2 files changed, 224 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-ect.rst diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst new file mode 100644 index 000000000000..3e06588f24fa --- /dev/null +++ b/Documentation/trace/coresight/coresight-ect.rst @@ -0,0 +1,211 @@ +============================================= +CoreSight Embedded Cross Trigger (CTI & CTM). +============================================= + + :Author: Mike Leach <mike.leach(a)linaro.org> + :Date: November 2019 + +Hardware Description +-------------------- + +The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes +individual input and output hardware signals known as triggers to and from +devices and interconnects them via the Cross Trigger Matrix (CTM) to other +devices via numbered channels, in order to propagate events between devices. + +e.g.:: + + 0000000 in_trigs ::::::: + 0 C 0----------->: : +======>(other CTI channel IO) + 0 P 0<-----------: : v + 0 U 0 out_trigs : : Channels ***** ::::::: + 0000000 : CTI :<=========>*CTM*<====>: CTI :---+ + ####### in_trigs : : (id 0-3) ***** ::::::: v + # ETM #----------->: : ^ ####### + # #<-----------: : +---# ETR # + ####### out_trigs ::::::: ####### + +The CTI driver enables the programming of the CTI to attach triggers to +channels. When an input trigger becomes active, the attached channel will +become active. Any output trigger attached to that channel will also +become active. The active channel is propagated to other CTIs via the CTM, +activating connected output triggers there, unless filtered by the CTI +channel gate. + +It is also possible to activate a channel using system software directly +programming registers in the CTI. + +The CTIs are registered by the system to be associated with CPUs and/or other +CoreSight devices on the trace data path. When these devices are enabled the +attached CTIs will also be enabled. By default/on power up the CTIs have +no programmed trigger/channel attachments, so will not affect the system +until explicitly programmed. + +The hardware trigger connections between CTIs and devices is implementation +defined, unless the CPU/ETM combination is a v8 architecture, in which case +the connections have an architecturally defined standard layout. + +The hardware trigger signals can also be connected to non-CoreSight devices +(e.g. UART), or be propagated off chip as hardware IO lines. + +All the CTI devices are associated with a CTM. On many systems there will be a +single effective CTM (one CTM, or multiple CTMs all interconnected), but it is +possible that systems can have nets of CTIs+CTM that are not interconnected by +a CTM to each other. On these systems a CTM index is declared to associate +CTI devices that are interconnected via a given CTM. + +Sysfs files and directories +--------------------------- + +The CTI devices appear on the existing CoreSight bus alongside the other +CoreSight devices:: + + >$ ls /sys/bus/coresight/devices + cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0 + cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0 + +The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by +that core. the ``cti_sys<N>`` CTIs are general system infrastructure CTIs that +can be associated with other CoreSight devices, or other system hardware +capable of generating or using trigger signals.:: + + >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0 + channels ctmid enable nr_trigger_cons mgmt power regs subsystem + triggers0 triggers1 uevent + +*Key file items are:-* + * ``enable``: enables/disables the CTI. + * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM + clusters that are not interconnected. + * ``nr_trigger_cons`` : total connections - triggers<N> directories. + +*Sub-directories:-* + * ``triggers<N>``: contains list of triggers for an individual connection. + * ``channels``: Contains the channel API - CTI main programming interface. + * ``regs``: Gives access to the raw programmable CTI regs. + * ``mgmt``: the standard CoreSight management registers. + + +triggers<N> directories +~~~~~~~~~~~~~~~~~~~~~~~ + +Individual trigger connection information. This describes trigger signals for +CoreSight and non-CoreSight connections. + +Each triggers directory has a set of parameters describing the triggers for +the connection. + + * ``name`` : name of connection + * ``in_signals`` : input trigger signal indexes used in this connection. + * ``in_types`` : functional types for in signals. + * ``out_signals`` : output trigger signals for this connection. + * ``out_types`` : functional types for out signals. + +e.g:: + + >$ ls ./cti_cpu0/triggers0/ + in_signals in_types name out_signals out_types + >$ cat ./cti_cpu0/triggers0/name + cpu0 + >$ cat ./cti_cpu0/triggers0/out_signals + 0-2 + >$ cat ./cti_cpu0/triggers0/out_types + pe_edbgreq pe_dbgrestart pe_ctiirq + >$ cat ./cti_cpu0/triggers0/in_signals + 0-1 + >$ cat ./cti_cpu0/triggers0/in_types + pe_dbgtrigger pe_pmuirq + +If a connection has zero signals in either the 'in' or 'out' triggers then +those parameters will be omitted. + +Channels API Directory +~~~~~~~~~~~~~~~~~~~~~~ + +This provides an easy way to attach triggers to channels, without needing +the multiple register operations that are required if manipulating the +'regs' sub-dir elements directly. + +A number of files provide this API:: + + >$ ls ./cti_sys0/channels/ + chan_clear chan_inuse chan_xtrigs_view trigin_detach + chan_free chan_pulse chan_xtrigs_view_sel trigout_attach + chan_gate_disable chan_set trig_filter_enable trigout_detach + chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered + +Most access to these elements take the form:: + + echo <chan> [<trigger>] > /<device_path>/<operation> + +where the optional <trigger> is only needed for trigXX_attach | detach +operations. + +e.g.:: + + >$ echo 0 1 > ./cti_sys0/channels/trigout_attach + >$ echo 0 > ./cti_sys0/channels/chan_set + +Attaches trigout(1) to channel(0), then activates channel(0) generating a +set state on cti_sys0.trigout(1) + + +*API operations* + + * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal. + * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal. + * ``chan_set``: Set the channel - the set state will be propagated around + the CTM to other connected devices. + * ``chan_clear``: Clear the channel. + * ``chan_pulse``: Set the channel for a single CoreSight clock cycle. + * ``chan_gate_enable``: Write operation sets the CTI gate to propagate + (enable) the channel to other devices. This operation takes a channel + number. CTI gate is enabled for all channels by default at power up. Read + to list the currently enabled channels on the gate. + * ``chan_gate_disable``: Write channel number to disable gate for that + channel. + * ``chan_inuse``: Show the current channels attached to any signal + * ``chan_free``: Show channels with no attached signals. + * ``chan_xtrig_view``: write a channel number to select a channel to view, + read to show the cross triggers programmed for the selected channel. + * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially + dangerous output signals to be set. + * ``trigout_filtered``: Trigger out signals that are prevented from being + set if filtering ``trig_filter_enable`` is enabled. One use is to prevent + accidental ``EDBGREQ`` signals stopping a core. + * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming. + Resets device hardware to default state. + + +The example below attaches input trigger index 1 to channel 2, and output +trigger index 6 to the same channel. It then examines the state of the +channel / trigger connections using the appropriate sysfs attributes. + +The settings mean that if either input trigger 1, or channel 2 go active then +trigger out 6 will go active. We then enable the CTI, and use the software +channel control to activate channel 2. We see the active channel on the +``choutstatus`` register and the active signal on the ``trigoutstatus`` +register. Finally clearing the channel removes this. + +e.g.:: + + .../cti_sys0/channels# echo 2 1 > trigin_attach + .../cti_sys0/channels# echo 2 6 > trigout_attach + .../cti_sys0/channels# cat chan_free + 0-1,3 + .../cti_sys0/channels# cat chan_inuse + 2 + .../cti_sys0/channels# echo 2 > chan_xtrigs_view + .../cti_sys0/channels# cat chan_xtrigs_view + [2] IN: 1 OUT: 6 + .../cti_sys0/# echo 1 > enable + .../cti_sys0/channels# echo 2 > chan_set + .../cti_sys0/channels# cat ../regs/choutstatus + 0x4 + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x40 + .../cti_sys0/channels# echo 2 > chan_clear + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x0 + .../cti_sys0/channels# cat ../regs/choutstatus + 0x0 diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index a566719f8e7e..108600ee1e12 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API:: Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +The CTI & CTM Modules +--------------------- + +The CTI (Cross Trigger Interface) provides a set of trigger signals between +individual CTIs and components, and can propagate these between all CTIs via +channels on the CTM (Cross Trigger Matrix). + +A separate documentation file is provided to explain the use of these devices. +(:doc:`coresight-ect`) [#fourth]_. + + .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm .. [#second] Documentation/trace/stm.rst .. [#third] https://github.com/Linaro/perf-opencsd + +.. [#fourth] Documentation/trace/coresight/coresight-ect.rst -- 2.17.1

6 years, 9 months

[PATCH v7 05/15] dt-bindings: arm: Adds CoreSight CTI hardware definitions.

by Mike Leach

Adds new coresight-cti.yaml file describing the bindings required to define CTI in the device trees. Adds an include file to dt-bindings/arm to define constants describing common signal functionality used in CoreSight and generic usage. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- .../bindings/arm/coresight-cti.yaml | 326 ++++++++++++++++++ .../devicetree/bindings/arm/coresight.txt | 7 + MAINTAINERS | 2 + include/dt-bindings/arm/coresight-cti-dt.h | 37 ++ 4 files changed, 372 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/coresight-cti.yaml create mode 100644 include/dt-bindings/arm/coresight-cti-dt.h diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml new file mode 100644 index 000000000000..e4d28cee5dfd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -0,0 +1,326 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-cti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Cross Trigger Interface (CTI) device. + +description: | + The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected + to one or more CoreSight components and/or a CPU, with CTIs interconnected in + a star topology via the Cross Trigger Matrix (CTM), which is not programmable. + The ECT components are not part of the trace generation data path and are thus + not part of the CoreSight graph described in the general CoreSight bindings + file coresight.txt. + + The CTI component properties define the connections between the individual + CTI and the components it is directly connected to, consisting of input and + output hardware trigger signals. CTIs can have a maximum number of input and + output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The + number is defined at design time, the maximum of each defined in the DEVID + register. + + CTIs are interconnected in a star topology via the CTM, using a number of + programmable channels, usually 4, but again implementation defined and + described in the DEVID register. The star topology is not required to be + described in the bindings as the actual connections are software + programmable. + + In general the connections between CTI and components via the trigger signals + are implementation defined, except when the CTI is connected to an ARM v8 + architecture core and optional ETM. + + In this case the ARM v8 architecture defines the required signal connections + between CTI and the CPU core and ETM if present. In the case of a v8 + architecturally connected CTI an additional compatible string is used to + indicate this feature (arm,coresight-cti-v8-arch). + + When CTI trigger connection information is unavailable then a minimal driver + binding can be declared with no explicit trigger signals. This will result + the driver detecting the maximum available triggers and channels from the + DEVID register and make them all available for use as a single default + connection. Any user / client application will require additional information + on the connections between the CTI and other components for correct operation. + This information might be found by enabling the Integration Test registers in + the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel + configuration). These registers may be used to explore the trigger connections + between CTI and other CoreSight components. + + Certain triggers between CoreSight devices and the CTI have specific types + and usages. These can be defined along with the signal indexes with the + constants defined in <dt-bindings/arm/coresight-cti-dt.h> + + For example a CTI connected to a core will usually have a DBGREQ signal. This + is defined in the binding as type PE_EDBGREQ. These types will appear in an + optional array alongside the signal indexes. Omitting types will default all + signals to GEN_IO. + + Note that some hardware trigger signals can be connected to non-CoreSight + components (e.g. UART etc) depending on hardware implementation. + +maintainers: + - Mike Leach <mike.leach(a)linaro.org> + +allOf: + - $ref: /schemas/arm/primecell.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,coresight-cti + required: + - compatible + +properties: + $nodename: + pattern: "^cti(@[0-9a-f]+)$" + compatible: + oneOf: + - items: + - const: arm,coresight-cti + - const: arm,primecell + - items: + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell + + reg: + maxItems: 1 + + cpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Handle to cpu this device is associated with. This must appear in the + base cti node if compatible string arm,coresight-cti-v8-arch is used, + or may appear in a trig-conns child node when appropriate. + + arm,cti-ctm-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the CTM this CTI is connected to, in large systems with multiple + separate CTI/CTM nets. Typically multi-socket systems where the CTM is + propagated between sockets. + + arm,cs-dev-assoc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + defines a phandle reference to an associated CoreSight trace device. + When the associated trace device is enabled, then the respective CTI + will be enabled. Use in a trig-conns node, or in CTI base node when + compatible string arm,coresight-cti-v8-arch used. If the associated + device has not been registered then the node name will be stored as + the connection name for later resolution. If the associated device is + not a CoreSight device or not registered then the node name will remain + the connection name and automatic enabling will not occur. + +patternProperties: + '^trig-conns@([0-9]+)$': + type: object + description: + A trigger connections child node which describes the trigger signals + between this CTI and another hardware device. This device may be a CPU, + CoreSight device, any other hardware device or simple external IO lines. + The connection may have both input and output triggers, or only one or the + other. + + properties: + + arm,trig-in-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger in signal numbers in use by a trig-conns node. + + arm,trig-in-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger in + signals. Types in this array match to the corresponding signal in the + arm,trig-in-sigs array. If the -types array is smaller, or omitted + completely, then the types will default to GEN_IO. + + arm,trig-out-sigs: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signal numbers in use by a trig-conns node. + + arm,trig-out-types: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of constants representing the types for the CTI trigger out + signals. Types in this array match to the corresponding signal + in the arm,trig-out-sigs array. If the "-types" array is smaller, + or omitted completely, then the types will default to GEN_IO. + + arm,trig-filters: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + List of CTI trigger out signals that will be blocked from becoming + active, unless filtering is disabled on the driver. + + arm,trig-conn-name: + allOf: + - $ref: /schemas/types.yaml#/definitions/string + description: + Defines a connection name that will be displayed, if the cpu or + arm,cs-dev-assoc properties are not being used in this connection. + Principle use for CTI that are connected to non-CoreSight devices, or + external IO. + + anyOf: + - required: + - arm,trig-in-sigs + - required: + - arm,trig-out-sigs + oneOf: + - required: + - arm,trig-conn-name + - required: + - cpu + - required: + - arm,cs-dev-assoc + required: + - reg + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: arm,coresight-cti-v8-arch + +then: + required: + - cpu + +examples: + # minimum CTI definition. DEVID register used to set number of triggers. + - | + cti@20020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x20020000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + # v8 architecturally defined CTI - CPU + ETM connections generated by the + # driver according to the v8 architecture specification. + - | + cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x859000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + }; + # Implementation defined CTI - CPU + ETM connections explicitly defined.. + # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h + - | + #include <dt-bindings/arm/coresight-cti-dt.h> + + cti@858000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x858000 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + arm,cti-ctm-id = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT + ETM_EXTOUT>; + arm,trig-out-sigs = <4 5 6 7>; + arm,trig-out-types = <ETM_EXTIN + ETM_EXTIN + ETM_EXTIN + ETM_EXTIN>; + arm,cs-dev-assoc = <&etm0>; + }; + + trig-conns@1 { + reg = <1>; + cpu = <&CPU0>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <PE_DBGTRIGGER + PE_PMUIRQ>; + arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-types = <PE_EDBGREQ + PE_DBGRESTART + PE_CTIIRQ>; + + arm,trig-filters = <0>; + }; + }; + # Implementation defined CTI - non CoreSight component connections. + - | + cti@20110000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<1 6>; + arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d02c42d21f2f..846f6daae71b 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -45,6 +45,10 @@ its hardware characteristcs. - Coresight Address Translation Unit (CATU) "arm,coresight-catu", "arm,primecell"; + - Coresight Cross Trigger Interface (CTI): + "arm,coresight-cti", "arm,primecell"; + See coresight-cti.yaml for full CTI definitions. + * reg: physical base address and length of the register set(s) of the component. @@ -72,6 +76,9 @@ its hardware characteristcs. * reg-names: the only acceptable values are "stm-base" and "stm-stimulus-base", each corresponding to the areas defined in "reg". +* Required properties for Coresight Cross Trigger Interface (CTI) + See coresight-cti.yaml for full CTI definitions. + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators and non-configurable funnels: diff --git a/MAINTAINERS b/MAINTAINERS index bd5847e802de..77f5d28fa84b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1645,9 +1645,11 @@ R: Suzuki K Poulose <suzuki.poulose(a)arm.com> L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* +F: include/dt-bindings/arm/coresight-cti-dt.h F: Documentation/trace/coresight/* F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +F: Documentation/devicetree/bindings/arm/coresight-cti.yaml F: Documentation/ABI/testing/sysfs-bus-coresight-devices-* F: tools/perf/arch/arm/util/pmu.c F: tools/perf/arch/arm/util/auxtrace.c diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ -- 2.17.1

6 years, 10 months

[PATCH v7 15/15] Update MAINTAINERS to add reviewer for CoreSight.

by Mike Leach

Added myself as a designated reviewer for the CoreSight infrastructure at the request of Mathieu Poirier. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 77f5d28fa84b..3051a3765955 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1642,6 +1642,7 @@ F: arch/arm/mach-ep93xx/micro9.c ARM/CORESIGHT FRAMEWORK AND DRIVERS M: Mathieu Poirier <mathieu.poirier(a)linaro.org> R: Suzuki K Poulose <suzuki.poulose(a)arm.com> +R: Mike Leach <mike.leach(a)linaro.org> L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* -- 2.17.1

6 years, 10 months

[PATCH v7 11/15] dt-bindings: arm: Juno platform - add CTI entries to device tree.

by Mike Leach

Add in CTI entries for Juno r0, r1 and r2 to device tree entries. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 162 +++++++++++++++++++++- arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi | 37 ++++- arch/arm64/boot/dts/arm/juno-r1.dts | 25 ++++ arch/arm64/boot/dts/arm/juno-r2.dts | 25 ++++ arch/arm64/boot/dts/arm/juno.dts | 25 ++++ 5 files changed, 269 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 1f3c80aafbd7..fffd75cd2fd9 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -119,7 +119,7 @@ * The actual size is just 4K though 64K is reserved. Access to the * unmapped reserved region results in a DECERR response. */ - etf@20010000 { /* etf0 */ + etf_sys0: etf@20010000 { /* etf0 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -143,7 +143,7 @@ }; }; - tpiu@20030000 { + tpiu_sys: tpiu@20030000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0 0x20030000 0 0x1000>; @@ -196,7 +196,7 @@ }; }; - etr@20070000 { + etr_sys: etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; iommus = <&smmu_etr 0>; @@ -214,7 +214,7 @@ }; }; - stm@20100000 { + stm_sys: stm@20100000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x20100000 0 0x1000>, <0 0x28000000 0 0x1000000>; @@ -291,6 +291,18 @@ }; }; + cti0: cti@22020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm0>; + }; + funnel@220c0000 { /* cluster0 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; @@ -351,6 +363,18 @@ }; }; + cti1: cti@22120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm1>; + }; + cpu_debug2: cpu-debug@23010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23010000 0x0 0x1000>; @@ -376,6 +400,18 @@ }; }; + cti2: cti@23020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm2>; + }; + funnel@230c0000 { /* cluster1 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; @@ -448,6 +484,18 @@ }; }; + cti3: cti@23120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm3>; + }; + cpu_debug4: cpu-debug@23210000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23210000 0x0 0x1000>; @@ -473,6 +521,18 @@ }; }; + cti4: cti@23220000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23220000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm4>; + }; + cpu_debug5: cpu-debug@23310000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23310000 0x0 0x1000>; @@ -498,6 +558,100 @@ }; }; + cti5: cti@23320000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23320000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm5>; + }; + + cti@20020000 { /* sys_cti_0 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<2 3>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etr_sys>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<7 6>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys0>; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<4 5 6 7>; + arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW + STM_TOUT_HETE STM_ASYNCOUT>; + arm,trig-out-sigs=<4 5>; + arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>; + arm,cs-dev-assoc = <&stm_sys>; + }; + + trig-conns@3 { + reg = <3>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&tpiu_sys>; + }; + }; + + cti@20110000 { /* sys_cti_1 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-out-sigs=<1 6>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + gpu: gpu@2d000000 { compatible = "arm,juno-mali", "arm,mali-t624"; reg = <0 0x2d000000 0 0x10000>; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index eda3d9e18af6..752b05f8bf31 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -23,7 +23,7 @@ }; }; - etf@20140000 { /* etf1 */ + etf_sys1: etf@20140000 { /* etf1 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20140000 0 0x1000>; @@ -82,4 +82,39 @@ }; }; + + cti@20160000 { /* sys_cti_2 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20160000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys1>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<2 3 4>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_0"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<5 6 7>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_1"; + }; + }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 5f290090b0cf..02aa51eb311d 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -309,3 +310,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 305300dd521c..75bb27c2d4dc 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -315,3 +316,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A72_0>; +}; + +&cti1 { + cpu = <&A72_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index f00cffbd032c..dbc22e70b62c 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" / { @@ -295,3 +296,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; -- 2.17.1

6 years, 10 months

[PATCH v7 09/15] coresight: cti: Add connection information to sysfs

by Mike Leach

Dynamically adds sysfs attributes for all connections defined in the CTI. Each connection has a triggers<N> sub-directory with name, in_signals, in_types, out_signals and out_types as read-only parameters in the directory. in_ or out_ parameters may be omitted if there are no in or out signals for the connection. Additionally each device has a nr_cons in the connections sub-directory. This allows clients to explore the connection and trigger signal details without needing to refer to device tree or specification of the device. Standardised type information is provided for certain common functions - e.g. snk_full for a trigger from a sink indicating full. Otherwise type defaults to genio. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> --- .../hwtracing/coresight/coresight-cti-sysfs.c | 333 +++++++++++++++++- drivers/hwtracing/coresight/coresight-cti.c | 10 +- drivers/hwtracing/coresight/coresight-cti.h | 8 + 3 files changed, 348 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index 8af1986ed69f..db3395c46f51 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -8,6 +8,67 @@ #include "coresight-cti.h" +/* + * Declare the number of static declared attribute groups + * Value includes groups + NULL value at end of table. + */ +#define CORESIGHT_CTI_STATIC_GROUPS_MAX 5 + +/* + * List of trigger signal type names. Match the constants declared in + * include\dt-bindings\arm\coresight-cti-dt.h + */ +static const char * const sig_type_names[] = { + "genio", /* GEN_IO */ + "intreq", /* GEN_INTREQ */ + "intack", /* GEN_INTACK */ + "haltreq", /* GEN_HALTREQ */ + "restartreq", /* GEN_RESTARTREQ */ + "pe_edbgreq", /* PE_EDBGREQ */ + "pe_dbgrestart",/* PE_DBGRESTART */ + "pe_ctiirq", /* PE_CTIIRQ */ + "pe_pmuirq", /* PE_PMUIRQ */ + "pe_dbgtrigger",/* PE_DBGTRIGGER */ + "etm_extout", /* ETM_EXTOUT */ + "etm_extin", /* ETM_EXTIN */ + "snk_full", /* SNK_FULL */ + "snk_acqcomp", /* SNK_ACQCOMP */ + "snk_flushcomp",/* SNK_FLUSHCOMP */ + "snk_flushin", /* SNK_FLUSHIN */ + "snk_trigin", /* SNK_TRIGIN */ + "stm_asyncout", /* STM_ASYNCOUT */ + "stm_tout_spte",/* STM_TOUT_SPTE */ + "stm_tout_sw", /* STM_TOUT_SW */ + "stm_tout_hete",/* STM_TOUT_HETE */ + "stm_hwevent", /* STM_HWEVENT */ + "ela_tstart", /* ELA_TSTART */ + "ela_tstop", /* ELA_TSTOP */ + "ela_dbgreq", /* ELA_DBGREQ */ +}; + +/* Show function pointer used in the connections dynamic declared attributes*/ +typedef ssize_t (*p_show_fn)(struct device *dev, struct device_attribute *attr, + char *buf); + +/* Connection attribute types */ +enum cti_conn_attr_type { + CTI_CON_ATTR_NAME, + CTI_CON_ATTR_TRIGIN_SIG, + CTI_CON_ATTR_TRIGOUT_SIG, + CTI_CON_ATTR_TRIGIN_TYPES, + CTI_CON_ATTR_TRIGOUT_TYPES, + CTI_CON_ATTR_MAX, +}; + +/* Names for the connection attributes */ +static const char * const con_attr_names[CTI_CON_ATTR_MAX] = { + "name", + "in_signals", + "out_signals", + "in_types", + "out_types", +}; + /* basic attributes */ static ssize_t enable_show(struct device *dev, struct device_attribute *attr, @@ -66,10 +127,21 @@ static ssize_t ctmid_show(struct device *dev, } static DEVICE_ATTR_RO(ctmid); +static ssize_t nr_trigger_cons_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return scnprintf(buf, PAGE_SIZE, "%d\n", drvdata->ctidev.nr_trig_con); +} +static DEVICE_ATTR_RO(nr_trigger_cons); + /* attribute and group sysfs tables. */ static struct attribute *coresight_cti_attrs[] = { &dev_attr_enable.attr, &dev_attr_ctmid.attr, + &dev_attr_nr_trigger_cons.attr, NULL, }; @@ -817,7 +889,263 @@ static struct attribute *coresight_cti_channel_attrs[] = { NULL, }; -/* sysfs groups */ +/* Create the connections trigger groups and attrs dynamically */ +/* + * Each connection has dynamic group triggers<N> + name, trigin/out sigs/types + * attributes, + each device has static nr_trigger_cons giving the number + * of groups. e.g. in sysfs:- + * /cti_<name>/triggers0 + * /cti_<name>/triggers1 + * /cti_<name>/nr_trigger_cons + * where nr_trigger_cons = 2 + */ +static ssize_t con_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct dev_ext_attribute *ext_attr = + container_of(attr, struct dev_ext_attribute, attr); + struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var; + + return scnprintf(buf, PAGE_SIZE, "%s\n", con->con_dev_name); +} + +static ssize_t trigin_sig_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct dev_ext_attribute *ext_attr = + container_of(attr, struct dev_ext_attribute, attr); + struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *cfg = &drvdata->config; + unsigned long mask = con->con_in->used_mask; + + return bitmap_print_to_pagebuf(true, buf, &mask, cfg->nr_trig_max); +} + +static ssize_t trigout_sig_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct dev_ext_attribute *ext_attr = + container_of(attr, struct dev_ext_attribute, attr); + struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *cfg = &drvdata->config; + unsigned long mask = con->con_out->used_mask; + + return bitmap_print_to_pagebuf(true, buf, &mask, cfg->nr_trig_max); +} + +/* convert a sig type id to a name */ +static const char * +cti_sig_type_name(struct cti_trig_con *con, int used_count, bool in) +{ + int idx = 0; + struct cti_trig_grp *grp = in ? con->con_in : con->con_out; + + if (grp->sig_types) { + if (used_count < grp->nr_sigs) + idx = grp->sig_types[used_count]; + } + return sig_type_names[idx]; +} + +static ssize_t trigin_type_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct dev_ext_attribute *ext_attr = + container_of(attr, struct dev_ext_attribute, attr); + struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var; + int sig_idx, used = 0, b_sz = PAGE_SIZE; + const char *name; + + for (sig_idx = 0; sig_idx < con->con_in->nr_sigs; sig_idx++) { + name = cti_sig_type_name(con, sig_idx, true); + used += scnprintf(buf + used, b_sz - used, "%s ", name); + } + used += scnprintf(buf + used, b_sz - used, "\n"); + return used; +} + +static ssize_t trigout_type_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct dev_ext_attribute *ext_attr = + container_of(attr, struct dev_ext_attribute, attr); + struct cti_trig_con *con = (struct cti_trig_con *)ext_attr->var; + int sig_idx, used = 0, b_sz = PAGE_SIZE; + const char *name; + + for (sig_idx = 0; sig_idx < con->con_out->nr_sigs; sig_idx++) { + name = cti_sig_type_name(con, sig_idx, false); + used += scnprintf(buf + used, b_sz - used, "%s ", name); + } + used += scnprintf(buf + used, b_sz - used, "\n"); + return used; +} + +/* + * Array of show function names declared above to allow selection + * for the connection attributes + */ +static p_show_fn show_fns[CTI_CON_ATTR_MAX] = { + con_name_show, + trigin_sig_show, + trigout_sig_show, + trigin_type_show, + trigout_type_show, +}; + +static int cti_create_con_sysfs_attr(struct device *dev, + struct cti_trig_con *con, + enum cti_conn_attr_type attr_type, + int attr_idx) +{ + struct dev_ext_attribute *eattr = 0; + char *name = 0; + + eattr = devm_kzalloc(dev, sizeof(struct dev_ext_attribute), + GFP_KERNEL); + if (eattr) { + name = devm_kstrdup(dev, con_attr_names[attr_type], + GFP_KERNEL); + if (name) { + /* fill out the underlying attribute struct */ + eattr->attr.attr.name = name; + eattr->attr.attr.mode = 0444; + + /* now the device_attribute struct */ + eattr->attr.show = show_fns[attr_type]; + } else { + return -ENOMEM; + } + } else { + return -ENOMEM; + } + eattr->var = con; + con->con_attrs[attr_idx] = &eattr->attr.attr; + return 0; +} + +static struct attribute_group * +cti_create_con_sysfs_group(struct device *dev, struct cti_device *ctidev, + int con_idx, struct cti_trig_con *tc) +{ + struct attribute_group *group = NULL; + int grp_idx; + + group = devm_kzalloc(dev, sizeof(struct attribute_group), GFP_KERNEL); + if (!group) + return NULL; + + group->name = devm_kasprintf(dev, GFP_KERNEL, "triggers%d", con_idx); + if (!group->name) + return NULL; + + grp_idx = con_idx + CORESIGHT_CTI_STATIC_GROUPS_MAX - 1; + ctidev->con_groups[grp_idx] = group; + tc->attr_group = group; + return group; +} + +/* create a triggers connection group and the attributes for that group */ +static int cti_create_con_attr_set(struct device *dev, int con_idx, + struct cti_device *ctidev, + struct cti_trig_con *tc) +{ + struct attribute_group *attr_group = NULL; + int attr_idx = 0; + int err = -ENOMEM; + + attr_group = cti_create_con_sysfs_group(dev, ctidev, con_idx, tc); + if (!attr_group) + return -ENOMEM; + + /* allocate NULL terminated array of attributes */ + tc->con_attrs = devm_kcalloc(dev, CTI_CON_ATTR_MAX + 1, + sizeof(struct attribute *), GFP_KERNEL); + if (!tc->con_attrs) + return -ENOMEM; + + err = cti_create_con_sysfs_attr(dev, tc, CTI_CON_ATTR_NAME, + attr_idx++); + if (err) + return err; + + if (tc->con_in->nr_sigs > 0) { + err = cti_create_con_sysfs_attr(dev, tc, + CTI_CON_ATTR_TRIGIN_SIG, + attr_idx++); + if (err) + return err; + + err = cti_create_con_sysfs_attr(dev, tc, + CTI_CON_ATTR_TRIGIN_TYPES, + attr_idx++); + if (err) + return err; + } + + if (tc->con_out->nr_sigs > 0) { + err = cti_create_con_sysfs_attr(dev, tc, + CTI_CON_ATTR_TRIGOUT_SIG, + attr_idx++); + if (err) + return err; + + err = cti_create_con_sysfs_attr(dev, tc, + CTI_CON_ATTR_TRIGOUT_TYPES, + attr_idx++); + if (err) + return err; + } + attr_group->attrs = tc->con_attrs; + return 0; +} + +/* create the array of group pointers for the CTI sysfs groups */ +int cti_create_cons_groups(struct device *dev, struct cti_device *ctidev) +{ + int nr_groups; + + /* nr groups - dynamic + static + NULL terminator */ + nr_groups = ctidev->nr_trig_con + CORESIGHT_CTI_STATIC_GROUPS_MAX; + ctidev->con_groups = devm_kcalloc(dev, nr_groups, + sizeof(struct attribute_group *), + GFP_KERNEL); + if (!ctidev->con_groups) + return -ENOMEM; + return 0; +} + +int cti_create_cons_sysfs(struct device *dev, struct cti_drvdata *drvdata) +{ + struct cti_device *ctidev = &drvdata->ctidev; + int err = 0, con_idx = 0, i; + struct cti_trig_con *tc = NULL; + + err = cti_create_cons_groups(dev, ctidev); + if (err) + return err; + + /* populate first locations with the static set of groups */ + for (i = 0; i < (CORESIGHT_CTI_STATIC_GROUPS_MAX - 1); i++) + ctidev->con_groups[i] = coresight_cti_groups[i]; + + /* add dynamic set for each connection */ + list_for_each_entry(tc, &ctidev->trig_cons, node) { + err = cti_create_con_attr_set(dev, con_idx++, ctidev, tc); + if (err) + break; + } + return err; +} + +/* attribute and group sysfs tables. */ static const struct attribute_group coresight_cti_group = { .attrs = coresight_cti_attrs, }; @@ -837,7 +1165,8 @@ static const struct attribute_group coresight_cti_channels_group = { .name = "channels", }; -const struct attribute_group *coresight_cti_groups[] = { +const struct attribute_group * +coresight_cti_groups[CORESIGHT_CTI_STATIC_GROUPS_MAX] = { &coresight_cti_group, &coresight_cti_mgmt_group, &coresight_cti_regs_group, diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c index 2be1b310e854..9d27dea1625f 100644 --- a/drivers/hwtracing/coresight/coresight-cti.c +++ b/drivers/hwtracing/coresight/coresight-cti.c @@ -676,12 +676,20 @@ static int cti_probe(struct amba_device *adev, const struct amba_id *id) goto err_out; } + /* create dynamic attributes for connections */ + ret = cti_create_cons_sysfs(dev, drvdata); + if (ret) { + dev_err(dev, "%s: create dynamic sysfs entries failed\n", + cti_desc.name); + goto err_out; + } + /* set up coresight component description */ cti_desc.pdata = pdata; cti_desc.type = CORESIGHT_DEV_TYPE_ECT; cti_desc.subtype.ect_subtype = CORESIGHT_DEV_SUBTYPE_ECT_CTI; cti_desc.ops = &cti_ops; - cti_desc.groups = coresight_cti_groups; + cti_desc.groups = drvdata->ctidev.con_groups; cti_desc.dev = dev; drvdata->csdev = coresight_register(&cti_desc); if (IS_ERR(drvdata->csdev)) { diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h index 578d7e9ac67e..14d1b8933c18 100644 --- a/drivers/hwtracing/coresight/coresight-cti.h +++ b/drivers/hwtracing/coresight/coresight-cti.h @@ -74,6 +74,8 @@ struct cti_trig_grp { * @con_dev: coresight device connected to the CTI, NULL if not CS device * @con_dev_name: name of connected device (CS or CPU) * @node: entry node in list of connections. + * @con_attrs: Dynamic sysfs attributes specific to this connection. + * @attr_group: Dynamic attribute group created for this connection. */ struct cti_trig_con { struct cti_trig_grp *con_in; @@ -81,6 +83,8 @@ struct cti_trig_con { struct coresight_device *con_dev; char *con_dev_name; struct list_head node; + struct attribute **con_attrs; + struct attribute_group *attr_group; }; /** @@ -91,12 +95,15 @@ struct cti_trig_con { * assumed there is a single CTM per SoC, ID 0). * @trig_cons: list of connections to this device. * @cpu: CPU ID if associated with CPU, -1 otherwise. + * @con_groups: combined static and dynamic sysfs groups for trigger + * connections. */ struct cti_device { int nr_trig_con; u32 ctm_id; struct list_head trig_cons; int cpu; + const struct attribute_group **con_groups; }; /** @@ -214,6 +221,7 @@ int cti_channel_gate_op(struct device *dev, enum cti_chan_gate_op op, u32 channel_idx); int cti_channel_setop(struct device *dev, enum cti_chan_set_op op, u32 channel_idx); +int cti_create_cons_sysfs(struct device *dev, struct cti_drvdata *drvdata); struct coresight_platform_data * coresight_cti_get_platform_data(struct device *dev); const char *cti_plat_get_node_name(struct fwnode_handle *fwnode); -- 2.17.1

6 years, 10 months

[PATCH v7 07/15] coresight: cti: Add device tree support for custom CTI.

by Mike Leach

Adds support for CTIs whose connections are implementation defined at hardware design time, and not constrained by v8 architecture. These CTIs have no standard connection setup, all the settings have to be defined in the device tree files. The patch creates a set of connections and trigger signals based on the information provided. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- .../coresight/coresight-cti-platform.c | 235 +++++++++++++++++- .../hwtracing/coresight/coresight-cti-sysfs.c | 11 + 2 files changed, 242 insertions(+), 4 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c index 36a276eda50a..b44d83142b62 100644 --- a/drivers/hwtracing/coresight/coresight-cti-platform.c +++ b/drivers/hwtracing/coresight/coresight-cti-platform.c @@ -13,9 +13,19 @@ #define NR_V8PE_OUT_SIGS 3 #define NR_V8ETM_INOUT_SIGS 4 +/* CTI device tree trigger connection node keyword */ +#define CTI_DT_CONNS "trig-conns" + /* CTI device tree connection property keywords */ #define CTI_DT_V8ARCH_COMPAT "arm,coresight-cti-v8-arch" #define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc" +#define CTI_DT_TRIGIN_SIGS "arm,trig-in-sigs" +#define CTI_DT_TRIGOUT_SIGS "arm,trig-out-sigs" +#define CTI_DT_TRIGIN_TYPES "arm,trig-in-types" +#define CTI_DT_TRIGOUT_TYPES "arm,trig-out-types" +#define CTI_DT_FILTER_OUT_SIGS "arm,trig-filters" +#define CTI_DT_CONN_NAME "arm,trig-conn-name" +#define CTI_DT_CTM_ID "arm,cti-ctm-id" #ifdef CONFIG_OF /* @@ -87,6 +97,14 @@ cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode, return name; } +static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode, + const char *name) +{ + if (is_of_node(fwnode)) + return of_node_name_eq(to_of_node(fwnode), name); + return false; +} + static int cti_plat_create_v8_etm_connection(struct device *dev, struct cti_drvdata *drvdata) { @@ -205,6 +223,211 @@ static int cti_plat_check_v8_arch_compatible(struct device *dev) return 0; } +static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode, + const char *name) +{ + int nr_elem = fwnode_property_count_u32(fwnode, name); + + return (nr_elem < 0 ? 0 : nr_elem); +} + +static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp, + const struct fwnode_handle *fwnode, + const char *grp_name) +{ + int idx, err = 0; + u32 *values; + + if (!tgrp->nr_sigs) + return 0; + + values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL); + if (!values) + return -ENOMEM; + + err = fwnode_property_read_u32_array(fwnode, grp_name, + values, tgrp->nr_sigs); + + if (!err) { + /* set the signal usage mask */ + for (idx = 0; idx < tgrp->nr_sigs; idx++) + tgrp->used_mask |= BIT(values[idx]); + } + + kfree(values); + return err; +} + +static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp, + const struct fwnode_handle *fwnode, + const char *type_name) +{ + int items, err = 0, nr_sigs; + u32 *values = NULL, i; + + /* allocate an array according to number of signals in connection */ + nr_sigs = tgrp->nr_sigs; + if (!nr_sigs) + return 0; + + /* see if any types have been included in the device description */ + items = cti_plat_count_sig_elements(fwnode, type_name); + if (items > nr_sigs) + return -EINVAL; + + /* need an array to store the values iff there are any */ + if (items) { + values = kcalloc(items, sizeof(u32), GFP_KERNEL); + if (!values) + return -ENOMEM; + + err = fwnode_property_read_u32_array(fwnode, type_name, + values, items); + if (err) + goto read_trig_types_out; + } + + /* + * Match type id to signal index, 1st type to 1st index etc. + * If fewer types than signals default remainder to GEN_IO. + */ + for (i = 0; i < nr_sigs; i++) { + if (i < items) { + tgrp->sig_types[i] = + values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO; + } else { + tgrp->sig_types[i] = GEN_IO; + } + } + +read_trig_types_out: + kfree(values); + return err; +} + +static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata, + const struct fwnode_handle *fwnode) +{ + struct cti_trig_grp *tg = NULL; + int err = 0, nr_filter_sigs; + + nr_filter_sigs = cti_plat_count_sig_elements(fwnode, + CTI_DT_FILTER_OUT_SIGS); + if (nr_filter_sigs == 0) + return 0; + + if (nr_filter_sigs > drvdata->config.nr_trig_max) + return -EINVAL; + + tg = kzalloc(sizeof(*tg), GFP_KERNEL); + if (!tg) + return -ENOMEM; + + err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS); + if (!err) + drvdata->config.trig_out_filter |= tg->used_mask; + + kfree(tg); + return err; +} + +static int cti_plat_create_connection(struct device *dev, + struct cti_drvdata *drvdata, + struct fwnode_handle *fwnode) +{ + struct cti_trig_con *tc = NULL; + int cpuid = -1, err = 0; + struct fwnode_handle *cs_fwnode = NULL; + struct coresight_device *csdev = NULL; + const char *assoc_name = "unknown"; + char cpu_name_str[16]; + int nr_sigs_in, nr_sigs_out; + + /* look to see how many in and out signals we have */ + nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS); + nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS); + + if ((nr_sigs_in > drvdata->config.nr_trig_max) || + (nr_sigs_out > drvdata->config.nr_trig_max)) + return -EINVAL; + + tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out); + if (!tc) + return -ENOMEM; + + /* look for the signals properties. */ + err = cti_plat_read_trig_group(tc->con_in, fwnode, + CTI_DT_TRIGIN_SIGS); + if (err) + goto create_con_err; + + err = cti_plat_read_trig_types(tc->con_in, fwnode, + CTI_DT_TRIGIN_TYPES); + if (err) + goto create_con_err; + + err = cti_plat_read_trig_group(tc->con_out, fwnode, + CTI_DT_TRIGOUT_SIGS); + if (err) + goto create_con_err; + + err = cti_plat_read_trig_types(tc->con_out, fwnode, + CTI_DT_TRIGOUT_TYPES); + if (err) + goto create_con_err; + + err = cti_plat_process_filter_sigs(drvdata, fwnode); + if (err) + goto create_con_err; + + /* read the connection name if set - may be overridden by later */ + fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name); + + /* associated cpu ? */ + cpuid = cti_plat_get_cpu_at_node(fwnode); + if (cpuid >= 0) { + drvdata->ctidev.cpu = cpuid; + scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid); + assoc_name = cpu_name_str; + } else { + /* associated device ? */ + cs_fwnode = fwnode_find_reference(fwnode, + CTI_DT_CSDEV_ASSOC, 0); + if (!IS_ERR_OR_NULL(cs_fwnode)) { + assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, + &csdev); + fwnode_handle_put(cs_fwnode); + } + } + /* set up a connection */ + err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name); + +create_con_err: + return err; +} + +static int cti_plat_create_impdef_connections(struct device *dev, + struct cti_drvdata *drvdata) +{ + int rc = 0; + struct fwnode_handle *fwnode = dev_fwnode(dev); + struct fwnode_handle *child = NULL; + + if (IS_ERR_OR_NULL(fwnode)) + return -EINVAL; + + fwnode_for_each_child_node(fwnode, child) { + if (cti_plat_node_name_eq(child, CTI_DT_CONNS)) + rc = cti_plat_create_connection(dev, drvdata, + child); + if (rc != 0) + break; + } + fwnode_handle_put(child); + + return rc; +} + /* get the hardware configuration & connection data. */ int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata) @@ -212,12 +435,16 @@ int cti_plat_get_hw_data(struct device *dev, int rc = 0; struct cti_device *cti_dev = &drvdata->ctidev; + /* get any CTM ID - defaults to 0 */ + device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id); + /* check for a v8 architectural CTI device */ - if (cti_plat_check_v8_arch_compatible(dev)) { + if (cti_plat_check_v8_arch_compatible(dev)) rc = cti_plat_create_v8_connections(dev, drvdata); - if (rc) - return rc; - } + else + rc = cti_plat_create_impdef_connections(dev, drvdata); + if (rc) + return rc; /* if no connections, just add a single default based on max IN-OUT */ if (cti_dev->nr_trig_con == 0) diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index 37e71724b67b..8af1986ed69f 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -56,9 +56,20 @@ static ssize_t enable_store(struct device *dev, } static DEVICE_ATTR_RW(enable); +static ssize_t ctmid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return scnprintf(buf, PAGE_SIZE, "%d\n", drvdata->ctidev.ctm_id); +} +static DEVICE_ATTR_RO(ctmid); + /* attribute and group sysfs tables. */ static struct attribute *coresight_cti_attrs[] = { &dev_attr_enable.attr, + &dev_attr_ctmid.attr, NULL, }; -- 2.17.1

6 years, 10 months

[PATCH v7 03/15] coresight: cti: Add sysfs access to program function regs

by Mike Leach

Adds in sysfs programming support for the CTI function register sets. Allows direct manipulation of channel / trigger association registers. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- drivers/hwtracing/coresight/Kconfig | 9 + .../hwtracing/coresight/coresight-cti-sysfs.c | 361 ++++++++++++++++++ drivers/hwtracing/coresight/coresight-cti.c | 19 + drivers/hwtracing/coresight/coresight-cti.h | 8 + 4 files changed, 397 insertions(+) diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index 45d3822c8c8c..83e841be1081 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -122,4 +122,13 @@ config CORESIGHT_CTI halt compared to disabling sources and sinks normally in driver software. +config CORESIGHT_CTI_INTEGRATION_REGS + bool "Access CTI CoreSight Integration Registers" + depends on CORESIGHT_CTI + help + This option adds support for the CoreSight integration registers on + this device. The integration registers allow the exploration of the + CTI trigger connections between this and other devices.These + registers are not used in normal operation and can leave devices in + an inconsistent state. endif diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index 507f8eb487fe..f687e07b68b0 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -109,6 +109,361 @@ static struct attribute *coresight_cti_mgmt_attrs[] = { NULL, }; +/* CTI low level programming registers */ + +/* + * Show a simple 32 bit value if enabled and powered. + * If inaccessible & pcached_val not NULL then show cached value. + */ +static ssize_t cti_reg32_show(struct device *dev, char *buf, + u32 *pcached_val, int reg_offset) +{ + u32 val = 0; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + if ((reg_offset >= 0) && cti_active(config)) { + CS_UNLOCK(drvdata->base); + val = readl_relaxed(drvdata->base + reg_offset); + if (pcached_val) + *pcached_val = val; + CS_LOCK(drvdata->base); + } else if (pcached_val) { + val = *pcached_val; + } + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "%#x\n", val); +} + +/* + * Store a simple 32 bit value. + * If pcached_val not NULL, then copy to here too, + * if reg_offset >= 0 then write through if enabled. + */ +static ssize_t cti_reg32_store(struct device *dev, const char *buf, + size_t size, u32 *pcached_val, int reg_offset) +{ + unsigned long val; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + /* local store */ + if (pcached_val) + *pcached_val = (u32)val; + + /* write through if offset and enabled */ + if ((reg_offset >= 0) && cti_active(config)) + cti_write_single_reg(drvdata, reg_offset, val); + spin_unlock(&drvdata->spinlock); + return size; +} + +/* Standard macro for simple rw cti config registers */ +#define cti_config_reg32_rw(name, cfgname, offset) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + return cti_reg32_show(dev, buf, \ + &drvdata->config.cfgname, offset); \ +} \ + \ +static ssize_t name##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + return cti_reg32_store(dev, buf, size, \ + &drvdata->config.cfgname, offset); \ +} \ +static DEVICE_ATTR_RW(name) + +static ssize_t inout_sel_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + u32 val; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + val = (u32)drvdata->config.ctiinout_sel; + return scnprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t inout_sel_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + if (val > (CTIINOUTEN_MAX - 1)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + drvdata->config.ctiinout_sel = val; + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(inout_sel); + +static ssize_t inen_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long val; + int index; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + spin_lock(&drvdata->spinlock); + index = drvdata->config.ctiinout_sel; + val = drvdata->config.ctiinen[index]; + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "INEN%d %#lx\n", index, val); +} + +static ssize_t inen_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + int index; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + index = config->ctiinout_sel; + config->ctiinen[index] = val; + + /* write through if enabled */ + if (cti_active(config)) + cti_write_single_reg(drvdata, CTIINEN(index), val); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(inen); + +static ssize_t outen_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long val; + int index; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + + spin_lock(&drvdata->spinlock); + index = drvdata->config.ctiinout_sel; + val = drvdata->config.ctiouten[index]; + spin_unlock(&drvdata->spinlock); + return scnprintf(buf, PAGE_SIZE, "OUTEN%d %#lx\n", index, val); +} + +static ssize_t outen_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + int index; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + index = config->ctiinout_sel; + config->ctiouten[index] = val; + + /* write through if enabled */ + if (cti_active(config)) + cti_write_single_reg(drvdata, CTIOUTEN(index), val); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(outen); + +static ssize_t intack_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + cti_write_intack(dev, val); + return size; +} +static DEVICE_ATTR_WO(intack); + +cti_config_reg32_rw(gate, ctigate, CTIGATE); +cti_config_reg32_rw(asicctl, asicctl, ASICCTL); +cti_config_reg32_rw(appset, ctiappset, CTIAPPSET); + +static ssize_t appclear_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + + /* a 1'b1 in appclr clears down the same bit in appset*/ + config->ctiappset &= ~val; + + /* write through if enabled */ + if (cti_active(config)) + cti_write_single_reg(drvdata, CTIAPPCLEAR, val); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_WO(appclear); + +static ssize_t apppulse_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + unsigned long val; + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + + /* write through if enabled */ + if (cti_active(config)) + cti_write_single_reg(drvdata, CTIAPPPULSE, val); + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_WO(apppulse); + +coresight_cti_reg(triginstatus, CTITRIGINSTATUS); +coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS); +coresight_cti_reg(chinstatus, CTICHINSTATUS); +coresight_cti_reg(choutstatus, CTICHOUTSTATUS); + +/* + * Define CONFIG_CORESIGHT_CTI_INTEGRATION_REGS to enable the access to the + * integration control registers. Normally only used to investigate connection + * data. + */ +#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS + +/* macro to access RW registers with power check only (no enable check). */ +#define coresight_cti_reg_rw(name, offset) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + u32 val = 0; \ + pm_runtime_get_sync(dev->parent); \ + spin_lock(&drvdata->spinlock); \ + if (drvdata->config.hw_powered) \ + val = readl_relaxed(drvdata->base + offset); \ + spin_unlock(&drvdata->spinlock); \ + pm_runtime_put_sync(dev->parent); \ + return scnprintf(buf, PAGE_SIZE, "0x%x\n", val); \ +} \ + \ +static ssize_t name##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + unsigned long val = 0; \ + if (kstrtoul(buf, 0, &val)) \ + return -EINVAL; \ + \ + pm_runtime_get_sync(dev->parent); \ + spin_lock(&drvdata->spinlock); \ + if (drvdata->config.hw_powered) \ + cti_write_single_reg(drvdata, offset, val); \ + spin_unlock(&drvdata->spinlock); \ + pm_runtime_put_sync(dev->parent); \ + return size; \ +} \ +static DEVICE_ATTR_RW(name) + +/* macro to access WO registers with power check only (no enable check). */ +#define coresight_cti_reg_wo(name, offset) \ +static ssize_t name##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + unsigned long val = 0; \ + if (kstrtoul(buf, 0, &val)) \ + return -EINVAL; \ + \ + pm_runtime_get_sync(dev->parent); \ + spin_lock(&drvdata->spinlock); \ + if (drvdata->config.hw_powered) \ + cti_write_single_reg(drvdata, offset, val); \ + spin_unlock(&drvdata->spinlock); \ + pm_runtime_put_sync(dev->parent); \ + return size; \ +} \ +static DEVICE_ATTR_WO(name) + +coresight_cti_reg_rw(itchout, ITCHOUT); +coresight_cti_reg_rw(ittrigout, ITTRIGOUT); +coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL); +coresight_cti_reg_wo(itchinack, ITCHINACK); +coresight_cti_reg_wo(ittriginack, ITTRIGINACK); +coresight_cti_reg(ittrigin, ITTRIGIN); +coresight_cti_reg(itchin, ITCHIN); +coresight_cti_reg(itchoutack, ITCHOUTACK); +coresight_cti_reg(ittrigoutack, ITTRIGOUTACK); + +#endif /* CORESIGHT_CTI_INTEGRATION_REGS */ + +static struct attribute *coresight_cti_regs_attrs[] = { + &dev_attr_inout_sel.attr, + &dev_attr_inen.attr, + &dev_attr_outen.attr, + &dev_attr_gate.attr, + &dev_attr_asicctl.attr, + &dev_attr_intack.attr, + &dev_attr_appset.attr, + &dev_attr_appclear.attr, + &dev_attr_apppulse.attr, + &dev_attr_triginstatus.attr, + &dev_attr_trigoutstatus.attr, + &dev_attr_chinstatus.attr, + &dev_attr_choutstatus.attr, +#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS + &dev_attr_itctrl.attr, + &dev_attr_ittrigin.attr, + &dev_attr_itchin.attr, + &dev_attr_ittrigout.attr, + &dev_attr_itchout.attr, + &dev_attr_itchoutack.attr, + &dev_attr_ittrigoutack.attr, + &dev_attr_ittriginack.attr, + &dev_attr_itchinack.attr, +#endif + NULL, +}; + +/* sysfs groups */ static const struct attribute_group coresight_cti_group = { .attrs = coresight_cti_attrs, }; @@ -118,8 +473,14 @@ static const struct attribute_group coresight_cti_mgmt_group = { .name = "mgmt", }; +static const struct attribute_group coresight_cti_regs_group = { + .attrs = coresight_cti_regs_attrs, + .name = "regs", +}; + const struct attribute_group *coresight_cti_groups[] = { &coresight_cti_group, &coresight_cti_mgmt_group, + &coresight_cti_regs_group, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c index f4b47761ae74..0f88b9bc2774 100644 --- a/drivers/hwtracing/coresight/coresight-cti.c +++ b/drivers/hwtracing/coresight/coresight-cti.c @@ -149,6 +149,25 @@ static int cti_disable_hw(struct cti_drvdata *drvdata) return 0; } +void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value) +{ + CS_UNLOCK(drvdata->base); + writel_relaxed(value, drvdata->base + offset); + CS_LOCK(drvdata->base); +} + +void cti_write_intack(struct device *dev, u32 ackval) +{ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cti_config *config = &drvdata->config; + + spin_lock(&drvdata->spinlock); + /* write if enabled */ + if (cti_active(config)) + cti_write_single_reg(drvdata, CTIINTACK, ackval); + spin_unlock(&drvdata->spinlock); +} + /* * Look at the HW DEVID register for some of the HW settings. * DEVID[15:8] - max number of in / out triggers. diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h index 0719221c7071..6f6f6773cd3b 100644 --- a/drivers/hwtracing/coresight/coresight-cti.h +++ b/drivers/hwtracing/coresight/coresight-cti.h @@ -180,7 +180,15 @@ struct cti_trig_con *cti_allocate_trig_con(struct device *dev, int in_sigs, int out_sigs); int cti_enable(struct coresight_device *csdev); int cti_disable(struct coresight_device *csdev); +void cti_write_intack(struct device *dev, u32 ackval); +void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value); struct coresight_platform_data * coresight_cti_get_platform_data(struct device *dev); +/* cti powered and enabled */ +static inline bool cti_active(struct cti_config *cfg) +{ + return cfg->hw_powered && cfg->hw_enabled; +} + #endif /* _CORESIGHT_CORESIGHT_CTI_H */ -- 2.17.1

6 years, 10 months

[PATCH v7 02/15] coresight: cti: Add sysfs coresight mgmt reg access.

by Mike Leach

Adds sysfs access to the coresight management registers. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- .../hwtracing/coresight/coresight-cti-sysfs.c | 53 +++++++++++++++++++ drivers/hwtracing/coresight/coresight-priv.h | 1 + 2 files changed, 54 insertions(+) diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index a832b8c6b866..507f8eb487fe 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -62,11 +62,64 @@ static struct attribute *coresight_cti_attrs[] = { NULL, }; +/* register based attributes */ + +/* macro to access RO registers with power check only (no enable check). */ +#define coresight_cti_reg(name, offset) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ + u32 val = 0; \ + pm_runtime_get_sync(dev->parent); \ + spin_lock(&drvdata->spinlock); \ + if (drvdata->config.hw_powered) \ + val = readl_relaxed(drvdata->base + offset); \ + spin_unlock(&drvdata->spinlock); \ + pm_runtime_put_sync(dev->parent); \ + return scnprintf(buf, PAGE_SIZE, "0x%x\n", val); \ +} \ +static DEVICE_ATTR_RO(name) + +/* coresight management registers */ +coresight_cti_reg(devaff0, CTIDEVAFF0); +coresight_cti_reg(devaff1, CTIDEVAFF1); +coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS); +coresight_cti_reg(devarch, CORESIGHT_DEVARCH); +coresight_cti_reg(devid, CORESIGHT_DEVID); +coresight_cti_reg(devtype, CORESIGHT_DEVTYPE); +coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0); +coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1); +coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2); +coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3); +coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4); + +static struct attribute *coresight_cti_mgmt_attrs[] = { + &dev_attr_devaff0.attr, + &dev_attr_devaff1.attr, + &dev_attr_authstatus.attr, + &dev_attr_devarch.attr, + &dev_attr_devid.attr, + &dev_attr_devtype.attr, + &dev_attr_pidr0.attr, + &dev_attr_pidr1.attr, + &dev_attr_pidr2.attr, + &dev_attr_pidr3.attr, + &dev_attr_pidr4.attr, + NULL, +}; + static const struct attribute_group coresight_cti_group = { .attrs = coresight_cti_attrs, }; +static const struct attribute_group coresight_cti_mgmt_group = { + .attrs = coresight_cti_mgmt_attrs, + .name = "mgmt", +}; + const struct attribute_group *coresight_cti_groups[] = { &coresight_cti_group, + &coresight_cti_mgmt_group, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index 82e563cdc879..aba6b789c969 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -22,6 +22,7 @@ #define CORESIGHT_CLAIMCLR 0xfa4 #define CORESIGHT_LAR 0xfb0 #define CORESIGHT_LSR 0xfb4 +#define CORESIGHT_DEVARCH 0xfbc #define CORESIGHT_AUTHSTATUS 0xfb8 #define CORESIGHT_DEVID 0xfc8 #define CORESIGHT_DEVTYPE 0xfcc -- 2.17.1

6 years, 10 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight