CoreSight

coresight@lists.linaro.org

6 participants
2594 discussions

[PATCH 1/1] cs-etm: Update to perf cs-etm decoder for OpenCSD v0.5

by Mike Leach

Adds additional generic packet types to switch statement in decoder to ensure compilation without errors. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index e4c929e..71f5497 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -201,6 +201,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: case OCSD_GEN_TRC_ELEM_EVENT: + case OCSD_GEN_TRC_ELEM_SWTRACE: + case OCSD_GEN_TRC_ELEM_CUSTOM: default: break; } -- 2.7.4

9 years, 1 month

Re: using ETM for "perf record -b"

by Mathieu Poirier

On 11 November 2016 at 08:32, Sebastian Pop <sebpop(a)gmail.com> wrote: > Salut Matthieu, Bon matin, > > I was following your patches to enable ETM support in the linux kernel > last years, and I have just seen that you have a very nice blog on how > to use perf record to gather execution traces. Depending on the source you have read the information may be outdated. Nowadays the very latest instructions can be found in the HOWTO.md on the OpenCSD repository [1]. That documentation is maintained regularly and is considered accurate. [1]. https://github.com/Linaro/OpenCSD/tree/opencsd-0v003 > I am mainly interested to use this mechanism to enable collection of > traces with "perf record -b" like Intel's Last Branch Record: this is > used by AutoFDO in the compiler to know which code paths are hot and > enable better inlining, register allocation, and code layout: > http://research.google.com/pubs/pub45290.html This looks interesting. > > I am interested to work with you to enable "perf record -b" on aarch64. This is a sizeable project that will keep you occupied for a little while :o) I am happy to give guidance and review patches. Some people on the CoreSight mailing list (CC'ed here) are very proficient with the CoreSight tracers and can help understand the more complex features of the IP. I suggest CC'ing the list if/when you have questions. Best regards, Mathieu > > Thanks, > Sebastian

9 years, 1 month

Re: CoreSight post from yan_lin_aung@yahoo.com requires approval

by Mathieu Poirier

> ---------- Forwarded message ---------- > From: Yan Lin Aung <yan_lin_aung(a)yahoo.com> > To: "coresight(a)lists.linaro.org" <coresight(a)lists.linaro.org> > Cc: > Date: Mon, 7 Nov 2016 03:45:45 +0000 (UTC) > Subject: perf with CoreSight and OpenCSD on TC2 and Juno r2 > Hi Linaro Coresight Team, > > I came to know of "Hardware Assisted Tracing on ARM with CoreSight and OpenCSD" by Mathieu Poirier. > In his presentation, he mentioned the reference platforms to evaluate perf with CoreSight and OpenCSD are Vexpress TC2 and Juno (Page 7 on his slide). > > I just checked the "HOWTO.MD" at OpenCSD github site. > However, there is very limited info on how to get started with Vexpress TC2 and Juno. > > I have access to the TC2 and Juno r2 platforms. > Please provide a rather detailed version of getting started guide to try out perf with CoreSight and OpenCSD on either TC2 or Juno r2. Hello Yan Lin, You are correct, the HOWTO.md on github concentrates on CoreSight and doesn't address platform specifics - something like this would be out of scope. I'm not exactly sure of what you are looking for in a "getting started guide"... Both Juno and TC2 are well supported upstream and can be booted with a mainline kernel. The choice of bootloader and user space are entirely up to users and don't affect the CoreSight suite nor its integration with the perf subsystem. The fact that you have access to both platform leads me to believe you are part of a large organisation. As such there is definitely people around you with experience on how to set-up the platforms. I can try to answer specific questions if you have any. Thanks, Mathieu > > Thanx. > > Regards, > Yan Lin Aung >

9 years, 1 month

Re: Linux Coresight driver question

by Mathieu Poirier

On 8 November 2016 at 12:27, Darius-Andrei Suciu <dsuciu(a)cs.stonybrook.edu> wrote: > Hello Mathieu, Hi > > My name is Darius Suciu, a Phd. student at Stony Brook University. Congratulation - a PhD is a serious endeavour. > I am > working on a project where I need to get tracing data from an Cortex A-9 cpu > (I'm using an i.MX6 nitrogen max board). The Coresight architecure seems > very complex to me. CS is complex to anyone ramping up on it. Looking at the drivers in the kernel tree most of the complexity comes from the integration with perf. The drivers and the framework are pretty bare bone and the sysFS interface very easy to understand. > I am trying to figure out how I can read the ETB buffer > from the kernel (without using a JTAG), and the Coresight driver seems to > offer this functionality. > On the comments on the Linux Coresight driver, it says it supports also PTM > (even though the configuration seems mostly ETM specific). In terms of configuration ETMv3 and PTM are quite similar. So far I haven't found enough discrepancies that would mandate splitting the ETMv3 driver. > Could you please help me out with some questions? Of course. > > Did you using the driver on a Cortex A-9 cpu ? Or do you know what changes > are required to make it work ? I never used CS on a cortex A9 but that is irrelevant. What is important is the kind of tracer (ETMv3/4/PTM) that is coupled with each CPU and we have support for all of them (except ITM). From there you'll need to take care of the power domains, clock and the device tree. > Do you know if the ETB buffer configuration is the same for ETM and PTM > architectures (can I reuse it) ETB and the ETM/PTM are different IP blocks and don't affect each other. The current ETB driver in the kernel tree will work with any kind of tracer. Mathieu > > Thank you for the help, > Darius >

9 years, 1 month

perf with CoreSight and OpenCSD on TC2 and Juno r2

by Yan Lin Aung

Hi Linaro Coresight Team, I came to know of "Hardware Assisted Tracing on ARM with CoreSight and OpenCSD" by Mathieu Poirier.In his presentation, he mentioned the reference platforms to evaluate perf with CoreSight and OpenCSD are Vexpress TC2 and Juno (Page 7 on his slide). I just checked the "HOWTO.MD" at OpenCSD github site.However, there is very limited info on how to get started with Vexpress TC2 and Juno. I have access to the TC2 and Juno r2 platforms.Please provide a rather detailed version of getting started guide to try out perf with CoreSight and OpenCSD on either TC2 or Juno r2. Thanx. Regards,Yan Lin Aung

9 years, 1 month

Re: CoreSight support in qemu

by Mathieu Poirier

On 15 October 2016 at 17:03, Miki Shifman <mikish(a)gmail.com> wrote: > Great, thanks! > Does Raspberry PI 2/3 also support CoreSight? And if it is, Does a DT exists > for it? (They're based on BCM2836 that contains Cortex-A7/BCM2837 that > contains Cortex-A53 respectively). All "A" class processor have coresight support. I haven't worked with the RPi 2/3 but I know Broadcom isn't very forthcoming with the device addresses and power domain configuration. The debug power domain may already be enabled... but it's doubtful. > > > On Oct 15, 2016 10:57 PM, "Mathieu Poirier" <mathieu.poirier(a)linaro.org> > wrote: >> >> On 15 October 2016 at 10:58, Miki Shifman <mikish(a)gmail.com> wrote: >> > Thanks a lot! >> > Just to make sure - Does the 410c like in that link contains CoreSight >> > HW >> > out of the box? >> >> Yes, that's the one. >> >> I can't say it's "out of the box" but pretty close. If it doesn't >> work on mainline Chunyan can tell you the patches/branch she used. >> >> Mathieu >> >> > >> > On Fri, Oct 14, 2016 at 8:17 PM, Mathieu Poirier >> > <mathieu.poirier(a)linaro.org> wrote: >> >> >> >> Hello Miki, >> >> >> >> On 14 October 2016 at 03:59, Miki Shifman <mikish(a)gmail.com> wrote: >> >> > Hi Mathieu, >> >> > >> >> > I'm been reading your tutorials about CoreSight and they're all very >> >> > interesting! I would appreciate your assistance with issues I have >> >> > with >> >> > it. >> >> > >> >> > I'm trying to learn how to use CoreSight, and currently I don't have >> >> > an >> >> > ARM >> >> > board supporting it, so i'm attempting to build a linux on qemu to >> >> > use >> >> > your >> >> > libraries. >> >> >> >> I have never heard about Coresight IP blocks being emulated on qemu - >> >> I'm not even sure it would be possible to do so. >> >> >> >> > >> >> > I've built linaro kernel 16.09 (latest) with CoreSight support. When >> >> > I'm >> >> > running qemu, I have sys/kernel/debug/coresight directory, but no >> >> > devices in >> >> > it, so I guess haven't been registered probably >> >> >> >> Right, that's because coresight entries aren't in the DT and as I said >> >> above, coresight blocks aren't emulated. >> >> >> >> I've heard of people thinking about providing an emulation but that >> >> would cause serious performance problems, at least from where I stand. >> >> >> >> Your best bet is to get one of the 96 board development kit, the 410c >> >> is probably best, and work with that. Of all the boards available >> >> it's likely the easiest to work with (note that I haven't tried >> >> myself). If you do end up acquiring a system Chunyan Zhang can help >> >> you with the DT specification. >> >> >> >> Best of luck, >> >> Mathieu >> >> >> >> > >> >> > Is there any flag I should add to qemu execution to support >> >> > CoreSight? >> >> > maybe >> >> > add some device? >> >> > >> >> > Thanking you in advance, >> >> > Miki >> > >> >

9 years, 2 months

Re: CoreSight support in qemu

by Mathieu Poirier

Hello Miki, On 14 October 2016 at 03:59, Miki Shifman <mikish(a)gmail.com> wrote: > Hi Mathieu, > > I'm been reading your tutorials about CoreSight and they're all very > interesting! I would appreciate your assistance with issues I have with it. > > I'm trying to learn how to use CoreSight, and currently I don't have an ARM > board supporting it, so i'm attempting to build a linux on qemu to use your > libraries. I have never heard about Coresight IP blocks being emulated on qemu - I'm not even sure it would be possible to do so. > > I've built linaro kernel 16.09 (latest) with CoreSight support. When I'm > running qemu, I have sys/kernel/debug/coresight directory, but no devices in > it, so I guess haven't been registered probably Right, that's because coresight entries aren't in the DT and as I said above, coresight blocks aren't emulated. I've heard of people thinking about providing an emulation but that would cause serious performance problems, at least from where I stand. Your best bet is to get one of the 96 board development kit, the 410c is probably best, and work with that. Of all the boards available it's likely the easiest to work with (note that I haven't tried myself). If you do end up acquiring a system Chunyan Zhang can help you with the DT specification. Best of luck, Mathieu > > Is there any flag I should add to qemu execution to support CoreSight? maybe > add some device? > > Thanking you in advance, > Miki

9 years, 2 months

Re: segmentation fault happens when reporting the perf.data

by Mathieu Poirier

On 10 October 2016 at 10:52, liubowen (A) <liubowen2(a)huawei.com> wrote: > Hi Mathieu: > > > > I am bob. ^_^ Indeed > > > > I am still stuck in the process of reporting. And I change to version > 4.8 and follow the newest HOWTO.md, but still get the error “Segmentation > fault (core dumped)” when reporting the perf.data. When asking questions like that CC the coresight mailing list (as I did here) - that way other people can help you. So, you've been working on this for weeks now without meaningful progress. This is a user space problem that has nothing to do with the trace acquisition on the target platform. Since you have all the source have you instrumented the code to see where the code dump happens? Knowing exactly where the fault happens will tell you about the nature of the problem and maybe to fix it yourself! Since you can decode the example sample then something is different in the trace data you generate. That doesn't mean it is wrong, it just means it is different. That is why you need to instrument the code to see what is happening. > > > > However the demo offered by you can be reported. It is very strange. And > I cannot find a better solution to solve this problem, > > > > I am eager for your help. > > > > Here, I offer some information about I am working. Firstly, I work based > on such as perf-opencsd-4.7. In order to run well on my platform similar to > D02 made from hisilicon, I change some files under ./drivers/irqchip. Then, > the coresight can work and the trace data can be written into perf.data. > Then, we should install opencsd on x86 machine, here, can we report the > perf.data on aarch64 machine? On the other hand, suppose that I get the > mainline kernel version 4.7, and make a Image which will be used on the > platform, and the coresight should work well, so is it not necessary to make > a Image from such as perf-opencsd-4.7? > > > > If you are convenient, we can offer you a platform I am working on. And > we can work together to make it come true. Of course you are very convenient > on condition. Unfortunately I don't have the bandwidth to work on your board. On the flip side I can try to decode the your trace data in my environment. Send me the files and the perf command line and I'll see what I can do - but again I have very limited bandwidth. Note that I won't try anything until you actually tell me the exact line the code crashes - you have to do the investigation. > > > > Thanks very much for your time as usual! I am appreciated for whatever > you have done. > > > > Best regards > > > > bob > >

9 years, 2 months

[PATCH] howto: update content to work with kernel v4.8

by Mathieu Poirier

Signed-off-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> --- HOWTO.md | 204 ++++++++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 163 insertions(+), 41 deletions(-) diff --git a/HOWTO.md b/HOWTO.md index 3f2a1399be76..aee5ef8b8b6e 100644 --- a/HOWTO.md +++ b/HOWTO.md @@ -7,23 +7,16 @@ This HOWTO explains how to use the perf cmd line tools and the openCSD library to collect and extract program flow traces generated by the CoreSight IP blocks on a Linux system. The examples have been generated using an aarch64 Juno-r0 platform. All information is considered accurate and tested -using library branches `opencsd-0v002` and `opencsd-0v003` (decode library only) -and the latest perf branch `perf-opencsd-4.7` (decode library + perf tools) +using library version v0.4.1 and the latest perf branch `perf-opencsd-4.8` on the [OpenCSD github repository][1]. -From v0.4 of the library releases appear as master branch tags. v0.4 requires -a patched version of the `perf-opencsd-4.7` perf tools to use the updated C API. -The unpatched `perf-opencsd-4.7` may be used with v0.4 if the build makefile -for the tools is altered to #define OPENCSD_INC_DEPRECATED_API which will -include the decprecated function call wrappers for the new generic API. On Target Trace Acquisition - Perf Record ----------------------------------------- - All the enhancement to the Perf tools that support the new `cs_etm` pmu have not been upstreamed yet. To get the required functionality branch -`perf-opencsd-4.7` needs to be downloaded to the target system where -traces are to be collected. This branch is an upstream v4.7 kernel +`perf-opencsd-4.8` needs to be downloaded to the target system where +traces are to be collected. This branch is an upstream v4.8 kernel supplemented with modifications to the CoreSight framework and drivers to be usable by the Perf core. The remaining out of tree patches are being upstreamed incrementally. @@ -50,7 +43,7 @@ the sink that will recieve trace data needs to be identified and given as an option on the perf command line. Once a sink has been identify trace collection can start. An easy and yet interesting example is the `uname` command: - linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -e cs_etm/(a)sink=20070000.etr/ --per-thread uname + linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -e cs_etm/(a)20070000.etr/ --per-thread uname This will generate a `perf.data` file where execution has been traced for both user and kernel space. To narrow the field to either user or kernel space the @@ -58,7 +51,7 @@ user and kernel space. To narrow the field to either user or kernel space the traces to user space: - linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -vvv -e cs_etm/(a)sink=20070000.etr/u --per-thread uname + linaro@linaro-nano:~/kernel$ ./tools/perf/perf record -vvv -e cs_etm/(a)20070000.etr/u --per-thread uname Problems setting modules path maps, continuing anyway... ----------------------------------------------------------- perf_event_attr: @@ -121,10 +114,108 @@ traces to user space: drwxr-xr-x 3 linaro linaro 4096 Mar 2 20:40 bin drwxr-xr-x 3 linaro linaro 4096 Mar 2 20:40 lib +Trace data filtering +-------------------- +The amount of traces generated by CoreSight tracers is staggering, event for +the most simple trace scenario. Reducing trace generation to specific areas +of interest is desirable to save trace buffer space and avoid getting lost in +the trace data that isn't relevant. Supplementing the 'k' and 'u' options +described above is the notion of address filters. + +On CoreSight two types of address filter have been implemented - address range +and start/stop filter: + +**Address range filters:** +With address range filters traces are generated if the instruction pointer +falls within the specified range. Any work done by the CPU outside of that +range will not be traced. Address range filters can be specified for both +user and kernel space session: + + perf record -e cs_etm/(a)20070000.etr/k --filter 'filter 0xffffff8008562d0c/0x48' --per-thread uname + + perf record -e cs_etm/(a)20070000.etr/u --filter 'filter 0x72c/0x40(a)/opt/lib/libcstest.so.1.0' --per-thread ./main + +When dealing with kernel space trace addresses are typically taken in the +'System.map' file. In user space addresses are relocatable and can be +extracted from an objdump output: + + $ aarch64-linux-gnu-objdump -d libcstest.so.1.0 + ... + ... + 000000000000072c <coresight_test1>: <------------ Beginning of traces + 72c: d10083ff sub sp, sp, #0x20 + 730: b9000fe0 str w0, [sp,#12] + 734: b9001fff str wzr, [sp,#28] + 738: 14000007 b 754 <coresight_test1+0x28> + 73c: b9400fe0 ldr w0, [sp,#12] + 740: 11000800 add w0, w0, #0x2 + 744: b9000fe0 str w0, [sp,#12] + 748: b9401fe0 ldr w0, [sp,#28] + 74c: 11000400 add w0, w0, #0x1 + 750: b9001fe0 str w0, [sp,#28] + 754: b9401fe0 ldr w0, [sp,#28] + 758: 7100101f cmp w0, #0x4 + 75c: 54ffff0d b.le 73c <coresight_test1+0x10> + 760: b9400fe0 ldr w0, [sp,#12] + 764: 910083ff add sp, sp, #0x20 + 768: d65f03c0 ret + ... + ... + +Following the address the amount of byte is specified and if tracing in user +space, the full path to the binary (or library) being traced. + +**Start/Stop filters:** +With start/stop filters traces are generated when the instruction pointer is +equal to the start address. Incidentally traces stop being generated when the +insruction pointer is equal to the stop address. Anything that happens between +there to events is traced: + + perf record -e cs_etm/(a)20070000.etr/k --filter 'start 0xffffff800856bc50,stop 0xffffff800856bcb0' --per-thread uname + + perf record -vvv -e cs_etm/(a)20070000.etr/u --filter 'start 0x72c(a)/opt/lib/libcstest.so.1.0, \ + stop 0x40082c@/home/linaro/main' \ + --per-thread ./main + +**Limitation on address filters:** +The only limitation on address filters is the amount of address comparator +found on an implementation and the mutual exclusion between range and +start stop filters. As such the following example would _not_ work: + + perf record -e cs_etm/(a)20070000.etr/k --filter 'start 0xffffff800856bc50,stop 0xffffff800856bcb0, \ // start/stop + filter 0x72c/0x40(a)/opt/lib/libcstest.so.1.0' \ // address range + --per-thread uname + On Target Trace Collection -------------------------- The entire program flow will have been recorded in the `perf.data` file. -Information about libraries and executable is stored under `$HOME/.debug` . +Information about libraries and executable is stored under `$HOME/.debug`: + + linaro@linaro-nano:~/kernel$ tree ~/.debug + .debug + ├── [kernel.kallsyms] + │ └── 0542921808098d591a7acba5a1163e8991897669 + │ └── kallsyms + ├── [vdso] + │ └── 551fbbe29579eb63be3178a04c16830b8d449769 + │ └── vdso + ├── bin + │ └── uname + │ └── ed95e81f97c4471fb2ccc21e356b780eb0c92676 + │ └── elf + └── lib + └── aarch64-linux-gnu + ├── ld-2.21.so + │ └── 94912dc5a1dc8c7ef2c4e4649d4b1639b6ebc8b7 + │ └── elf + └── libc-2.21.so + └── 169a143e9c40cfd9d09695333e45fd67743cd2d6 + └── elf + + 13 directories, 5 files + linaro@linaro-nano:~/kernel$ + + All this information needs to be collected in order to successfully decode traces off target: @@ -141,7 +232,7 @@ As of this writing the openCSD library is not part of the perf tools source. It is available on [github][1] and needs to be compiled before perf. Checkout the required branch/tag version into a local directory. - linaro@t430:~/linaro/coresight$ git clone -b opencsd-0v003 https://github.com/Linaro/OpenCSD.git my-opencsd + linaro@t430:~/linaro/coresight$ git clone -b v0.4.1 https://github.com/Linaro/OpenCSD.git my-opencsd Cloning into 'OpenCSD'... remote: Counting objects: 2063, done. remote: Total 2063 (delta 0), reused 0 (delta 0), pack-reused 2063 @@ -166,19 +257,20 @@ the host's (which has nothing to do with the target) architecture: linaro@t430:~/linaro/coresight/my-opencsd/decoder/build/linux$ ls ../../lib/linux64/dbg/ libcstraced.a libcstraced_c_api.a libcstraced_c_api.so libcstraced.so + Off Target Perf Tools Compilation --------------------------------- As stated above not all the pieces of the solution have been upstreamed. To -get all the components branch `perf-opencsd-4.7` needs to be +get all the components branch `perf-opencsd-4.8` needs to be obtained: - linaro@t430:~/linaro/coresight$ git clone -b perf-opencsd-4.7 https://github.com/Linaro/OpenCSD.git perf-opencsd-4.7 + linaro@t430:~/linaro/coresight$ git clone -b perf-opencsd-4.8 https://github.com/Linaro/OpenCSD.git perf-opencsd-4.8 ... ... - linaro@t430:~/linaro/coresight$ ls perf-opencsd-4.7/ + linaro@t430:~/linaro/coresight$ ls perf-opencsd-4.8/ arch certs CREDITS Documentation firmware include ipc Kconfig lib Makefile net REPORTING-BUGS scripts sound usr - block COPYING crypto drivers fs init Kbuild kernel MAINTAINERS mm README samples security tools virt + block COPYING crypto drivers fs init Kbuild kernel MAINTAINERS mm README samples security tools virt Since the openCSD library is not part of the perf tools, an environment variable telling the build scripts where to find the library is needed. If @@ -187,12 +279,12 @@ successful, but handling of CoreSight trace data won't be supported. **See perf-test-scripts below for assistance in creating a build and test enviroment.** - linaro@t430:~/linaro/coresight$ cd perf-opencsd-4.7 - linaro@t430:~/linaro/coresight/perf-opencsd-4.7$ export CSTRACE_PATH=~/linaro/coresight/my-opencsd/decoder - linaro@t430:~/linaro/coresight/perf-opencsd-4.7$ make -C tools/perf + linaro@t430:~/linaro/coresight$ cd perf-opencsd-4.8 + linaro@t430:~/linaro/coresight/perf-opencsd-4.8$ export CSTRACE_PATH=~/linaro/coresight/my-opencsd/decoder + linaro@t430:~/linaro/coresight/perf-opencsd-4.8$ make -C tools/perf ... ... - linaro@t430:~/linaro/coresight/perf-opencsd-4.7$ ls -l tools/perf/perf + linaro@t430:~/linaro/coresight/perf-opencsd-4.8$ ls -l tools/perf/perf -rwxrwxr-x 1 linaro linaro 6276360 Mar 3 10:05 tools/perf/perf @@ -205,34 +297,33 @@ At the end of the compilation a new perf binary is available in `tools/perf/` Trace Decoding with Perf Report ------------------------------- - Before working with custom traces it is suggested to use a trace bundle that is known to be working properly. A sample bundle has been made available here [2]. Trace bundles can be extracted anywhere and have no dependencies on where the perf tools and openCSD library have been compiled. - linaro@t430:~/linaro/coresight$ mkdir feb24 - linaro@t430:~/linaro/coresight$ cd feb24 - linaro@t430:~/linaro/coresight/feb24$ wget http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.feb24.tgz - linaro@t430:~/linaro/coresight/feb24$ md5sum uname.v4.user.feb24.tgz - f53f11d687ce72bdbe9de2e67e960ec6 uname.v4.user.feb24.tgz - linaro@t430:~/linaro/coresight/feb24$ tar xf uname.v4.user.feb24.tgz - linaro@t430:~/linaro/coresight/feb24$ ls -la + linaro@t430:~/linaro/coresight$ mkdir sept20 + linaro@t430:~/linaro/coresight$ cd sept20 + linaro@t430:~/linaro/coresight/sept20$ wget http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.sept20.tgz + linaro@t430:~/linaro/coresight/sept20$ md5sum uname.v4.user.sept20.tgz + f53f11d687ce72bdbe9de2e67e960ec6 uname.v4.user.sept20.tgz + linaro@t430:~/linaro/coresight/sept20$ tar xf uname.v4.user.sept20.tgz + linaro@t430:~/linaro/coresight/sept20$ ls -la total 1312 drwxrwxr-x 3 linaro linaro 4096 Mar 3 10:26 . drwxrwxr-x 5 linaro linaro 4096 Mar 3 10:13 .. drwxr-xr-x 7 linaro linaro 4096 Feb 24 12:21 .debug -rw------- 1 linaro linaro 78016 Feb 24 12:21 perf.data - -rw-rw-r-- 1 linaro linaro 1245881 Feb 24 12:25 uname.v4.user.feb24.tgz + -rw-rw-r-- 1 linaro linaro 1245881 Feb 24 12:25 uname.v4.user.sept20.tgz Perf is expecting files related to the trace capture (`perf.data`) to be located under `~/.debug` [3]. This example will remove the current `~/.debug` directory to be sure everything is clean. - linaro@t430:~/linaro/coresight/feb24$ rm -rf ~/.debug - linaro@t430:~/linaro/coresight/feb24$ cp -dpR .debug ~/ - linaro@t430:~/linaro/coresight/feb24$ export LD_LIBRARY_PATH=~/linaro/coresight/my-opencsd/decoder/lib/linux64/dbg/ - linaro@t430:~/linaro/coresight/feb24$ ../perf-opencsd-4.7/tools/perf/perf report --stdio + linaro@t430:~/linaro/coresight/sept20$ rm -rf ~/.debug + linaro@t430:~/linaro/coresight/sept20$ cp -dpR .debug ~/ + linaro@t430:~/linaro/coresight/sept20$ export LD_LIBRARY_PATH=~/linaro/coresight/my-opencsd/decoder/lib/linux64/dbg/ + linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-4.8/tools/perf/perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # @@ -276,7 +367,7 @@ to be sure everything is clean. Additional data can be obtained, which contains a dump of the trace packets received using the command - mjl@ubuntu-vbox:./perf-opencsd-4.7/coresight/tools/perf/perf report --stdio --dump + mjl@ubuntu-vbox:./perf-opencsd-4.8/coresight/tools/perf/perf report --stdio --dump resulting a large amount of data, trace looking like:- @@ -325,10 +416,10 @@ Trace Decoding with Perf Script Working with perf scripts needs more command line options but yields interesting results. - linaro@t430:~/linaro/coresight/feb24$ export EXEC_PATH=/home/linaro/coresight/perf-opencsd-4.7/tools/perf/ - linaro@t430:~/linaro/coresight/feb24$ export SCRIPT_PATH=$EXEC_PATH/scripts/python/ - linaro@t430:~/linaro/coresight/feb24$ export XTOOL_PATH=/your/aarch64/toolchain/path/bin/ - linaro@t430:~/linaro/coresight/feb24$ ../perf-opencsd-4.7/tools/perf/perf --exec-path=${EXEC_PATH} script --script=python:${SCRIPT_PATH}/cs-trace-disasm.py -- -d ${XTOOL_PATH}/aarch64-linux-gnu-objdump + linaro@t430:~/linaro/coresight/sept20$ export EXEC_PATH=/home/linaro/coresight/perf-opencsd-4.8/tools/perf/ + linaro@t430:~/linaro/coresight/sept20$ export SCRIPT_PATH=$EXEC_PATH/scripts/python/ + linaro@t430:~/linaro/coresight/sept20$ export XTOOL_PATH=/your/aarch64/toolchain/path/bin/ + linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-4.8/tools/perf/perf --exec-path=${EXEC_PATH} script --script=python:${SCRIPT_PATH}/cs-trace-disasm.py -- -d ${XTOOL_PATH}/aarch64-linux-gnu-objdump 7f89f24d80: 910003e0 mov x0, sp 7f89f24d84: 94000d53 bl 7f89f282d0 <free@plt+0x3790> @@ -354,6 +445,37 @@ interesting results. 7f89f28304: eb01001f cmp x0, x1 7f89f28308: 54ffffc1 b.ne 7f89f28300 <free@plt+0x37c0> +Kernel Trace Decoding +--------------------- + +When dealing with kernel space traces the vmlinux file has to be communicated +explicitely to perf using the "--vmlinux" command line option: + + linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-4.8/tools/perf/perf report --stdio --vmlinux=./vmlinux + ... + ... + linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-4.8/tools/perf/perf script --vmlinux=./vmlinux + +When using scripts things get a little more convoluted. Using the same example +an above but for traces but for kernel traces, the command line becomes: + + linaro@t430:~/linaro/coresight/sept20$ export EXEC_PATH=/home/linaro/coresight/perf-opencsd-4.8/tools/perf/ + linaro@t430:~/linaro/coresight/sept20$ export SCRIPT_PATH=$EXEC_PATH/scripts/python/ + linaro@t430:~/linaro/coresight/sept20$ export XTOOL_PATH=/your/aarch64/toolchain/path/bin/ + linaro@t430:~/linaro/coresight/sept20$ ../perf-opencsd-4.8/tools/perf/perf --exec-path=${EXEC_PATH} script \ + --vmlinux=./vmlinux \ + --script=python:${SCRIPT_PATH}/cs-trace-disasm.py -- \ + -d ${XTOOLS_PATH}/aarch64-linux-gnu-objdump \ + -k ./vmlinux + ... + ... + +The option "--vmlinux=./vmlinux" is interpreted by the "perf script" command +the same way it if for "perf report". The option "-k ./vmlinux" is dependant +on the script being executed and has no related to the "--vmlinux", though it +is highly advised to keep them synchronized. + + Perf Test Environment Scripts ----------------------------- @@ -415,6 +537,6 @@ Best regards, -------------------------------------- [1]: https://github.com/Linaro/OpenCSD "OpenCSD Github" -[2]: wget http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.feb24.tgz +[2]: http://people.linaro.org/~mathieu.poirier/openCSD/uname.v4.user.sept20.tgz [3]: Get in touch with us if you know a way to change this. -- 2.7.4

9 years, 2 months

RE: Usage of Coresight

by Kaiyou Wang

Hi Mathieu, Thanks, I don't find CS devices list in the dts file. Hi Suzuki, Could you give me any help? How to add them in dts file, is there any example? I download the code by the instruction of https://community.arm.com/docs/DOC-10804 , build with" ./build-scripts/build-all.sh juno-busybox" Thanks -----Original Message----- From: Mathieu Poirier [mailto:mathieu.poirier@linaro.org] Sent: Wednesday, September 28, 2016 7:27 AM To: Kaiyou Wang Subject: Re: Usage of Coresight If you don't see CS devices under /sys/bus/coresight/devices/ it means that either there is not CS devices listed in the DT or something is wrong with the clock and the blocks aren't discovered during the AMBA probe. Suzuki Poulose can likely help you on that front. Mathieu On 27 September 2016 at 00:03, Kaiyou Wang <Kaiyou.Wang(a)arm.com> wrote: > Hi Mathieu, > > On my Juno-R2 board, there is no device under > /sys/bus/coresight/devices/ How to enable it? > > / # > / # ls /sys/bus/coresight/ > devices drivers_autoprobe uevent > drivers drivers_probe > / # ls /sys/bus/coresight/devices/ > / # > / # > / # ls sys/bus/coresight/drivers > / # > / # cat sys/bus/coresight/drivers_autoprobe > 1 > / # > > -----Original Message----- > From: Mathieu Poirier [mailto:mathieu.poirier@linaro.org] > Sent: Tuesday, September 27, 2016 5:54 AM > To: Kaiyou Wang > Cc: coresight(a)lists.linaro.org > Subject: Re: Usage of Coresight > > On 26 September 2016 at 04:12, Kaiyou Wang <Kaiyou.Wang(a)arm.com> wrote: >> Hi Mathieu, >> >> Thanks for your reply, ask a quick question, is there any lock on SOC? > > None > >> I find CPU cannot access the mapped register of ETM after unlock the OSLOCK and software access lock. >> But the coresight driver could access them, could you give me any suggestion? > > What are you looking to do? There is definitely something wrong but it is impossible for me to help you with the information you have provided. The _probe() functions are fairly simple - I suggest using those as a starting example. From there it should be easy to work your way back to your current situation. > > Mathieu > > >> >> -----Original Message----- >> From: Mathieu Poirier [mailto:mathieu.poirier@linaro.org] >> Sent: Wednesday, September 21, 2016 10:27 PM >> To: Kaiyou Wang >> Cc: coresight(a)lists.linaro.org >> Subject: Re: Usage of Coresight >> >> Good day, >> >> There is a lot of documentation around on how to use the CoreSight framework and drivers. In the kernel tree the documentation directory [1] is a good place to start. Regarding the integration with perf and how that works with the rest of the solution you are encouraged to visit the openCSD github site [2]. There the "HOWTO.md" on the master branch has all the details needed to get the solution going. >> >> That being said the release of kernel v4.8 is imminent (Sunday September 25th to be exact) and with it comes a lot of new functionality. I will be rebasing all the out of tree code to v4.8 along with updating the documentation next week - by Friday September 20th everything should be in good standing. >> >> In the mean time you can read the current HOWTO.md to get familiar with the solution, that is probably a good time investment. >> >> Thanks, >> Mathieu >> >> [1]. >> http://lxr.free-electrons.com/source/Documentation/trace/coresight.tx >> t [2]. https://github.com/Linaro/OpenCSD >> >> On 21 September 2016 at 04:27, Kaiyou Wang <Kaiyou.Wang(a)arm.com> wrote: >>> Hi Mathieu, >>> >>> >>> >>> This is Kaiyou from ARM, I find the Coresight drive in Linaro >>> kernel code “kernel-release/drivers/hwtracing/coresight”. >>> >>> Could you give me any documents how to use the Coresight driver in >>> Linaro Kernel? >>> >>> >>> >>> Thanks and Best Regards, >>> >>> Kaiyou >>> >>> >>> >>> IMPORTANT NOTICE: The contents of this email and any attachments are >>> confidential and may also be privileged. If you are not the intended >>> recipient, please notify the sender immediately and do not disclose >>> the contents to any other person, use it for any purpose, or store >>> or copy the information in any medium. Thank you. >> >> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. > > IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

9 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight