For easy management and friendly adding more Coresight documentation, this commit creates a new directory: Documentation/trace/coresight.
This commit also moves Coresight related docs into the new directory and updates MAINTAINERS file to reflect docs movement.
Signed-off-by: Leo Yan leo.yan@linaro.org --- Documentation/trace/coresight-cpu-debug.txt | 187 ---------- Documentation/trace/coresight.txt | 383 --------------------- .../trace/coresight/coresight-cpu-debug.txt | 187 ++++++++++ Documentation/trace/coresight/coresight.txt | 383 +++++++++++++++++++++ MAINTAINERS | 4 +- 5 files changed, 572 insertions(+), 572 deletions(-) delete mode 100644 Documentation/trace/coresight-cpu-debug.txt delete mode 100644 Documentation/trace/coresight.txt create mode 100644 Documentation/trace/coresight/coresight-cpu-debug.txt create mode 100644 Documentation/trace/coresight/coresight.txt
diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt deleted file mode 100644 index 2b9b51c..0000000 --- a/Documentation/trace/coresight-cpu-debug.txt +++ /dev/null @@ -1,187 +0,0 @@ - Coresight CPU Debug Module - ========================== - - Author: Leo Yan leo.yan@linaro.org - Date: April 5th, 2017 - -Introduction ------------- - -Coresight CPU debug module is defined in ARMv8-a architecture reference manual -(ARM DDI 0487A.k) Chapter 'Part H: External debug', the CPU can integrate -debug module and it is mainly used for two modes: self-hosted debug and -external debug. Usually the external debug mode is well known as the external -debugger connects with SoC from JTAG port; on the other hand the program can -explore debugging method which rely on self-hosted debug mode, this document -is to focus on this part. - -The debug module provides sample-based profiling extension, which can be used -to sample CPU program counter, secure state and exception level, etc; usually -every CPU has one dedicated debug module to be connected. Based on self-hosted -debug mechanism, Linux kernel can access these related registers from mmio -region when the kernel panic happens. The callback notifier for kernel panic -will dump related registers for every CPU; finally this is good for assistant -analysis for panic. - - -Implementation --------------- - -- During driver registration, it uses EDDEVID and EDDEVID1 - two device ID - registers to decide if sample-based profiling is implemented or not. On some - platforms this hardware feature is fully or partially implemented; and if - this feature is not supported then registration will fail. - -- At the time this documentation was written, the debug driver mainly relies on - information gathered by the kernel panic callback notifier from three - sampling registers: EDPCSR, EDVIDSR and EDCIDSR: from EDPCSR we can get - program counter; EDVIDSR has information for secure state, exception level, - bit width, etc; EDCIDSR is context ID value which contains the sampled value - of CONTEXTIDR_EL1. - -- The driver supports a CPU running in either AArch64 or AArch32 mode. The - registers naming convention is a bit different between them, AArch64 uses - 'ED' for register prefix (ARM DDI 0487A.k, chapter H9.1) and AArch32 uses - 'DBG' as prefix (ARM DDI 0487A.k, chapter G5.1). The driver is unified to - use AArch64 naming convention. - -- ARMv8-a (ARM DDI 0487A.k) and ARMv7-a (ARM DDI 0406C.b) have different - register bits definition. So the driver consolidates two difference: - - If PCSROffset=0b0000, on ARMv8-a the feature of EDPCSR is not implemented; - but ARMv7-a defines "PCSR samples are offset by a value that depends on the - instruction set state". For ARMv7-a, the driver checks furthermore if CPU - runs with ARM or thumb instruction set and calibrate PCSR value, the - detailed description for offset is in ARMv7-a ARM (ARM DDI 0406C.b) chapter - C11.11.34 "DBGPCSR, Program Counter Sampling Register". - - If PCSROffset=0b0010, ARMv8-a defines "EDPCSR implemented, and samples have - no offset applied and do not sample the instruction set state in AArch32 - state". So on ARMv8 if EDDEVID1.PCSROffset is 0b0010 and the CPU operates - in AArch32 state, EDPCSR is not sampled; when the CPU operates in AArch64 - state EDPCSR is sampled and no offset are applied. - - -Clock and power domain ----------------------- - -Before accessing debug registers, we should ensure the clock and power domain -have been enabled properly. In ARMv8-a ARM (ARM DDI 0487A.k) chapter 'H9.1 -Debug registers', the debug registers are spread into two domains: the debug -domain and the CPU domain. - - +---------------+ - | | - | | - +----------+--+ | - dbg_clock -->| |**| |<-- cpu_clock - | Debug |**| CPU | - dbg_power_domain -->| |**| |<-- cpu_power_domain - +----------+--+ | - | | - | | - +---------------+ - -For debug domain, the user uses DT binding "clocks" and "power-domains" to -specify the corresponding clock source and power supply for the debug logic. -The driver calls the pm_runtime_{put|get} operations as needed to handle the -debug power domain. - -For CPU domain, the different SoC designs have different power management -schemes and finally this heavily impacts external debug module. So we can -divide into below cases: - -- On systems with a sane power controller which can behave correctly with - respect to CPU power domain, the CPU power domain can be controlled by - register EDPRCR in driver. The driver firstly writes bit EDPRCR.COREPURQ - to power up the CPU, and then writes bit EDPRCR.CORENPDRQ for emulation - of CPU power down. As result, this can ensure the CPU power domain is - powered on properly during the period when access debug related registers; - -- Some designs will power down an entire cluster if all CPUs on the cluster - are powered down - including the parts of the debug registers that should - remain powered in the debug power domain. The bits in EDPRCR are not - respected in these cases, so these designs do not support debug over - power down in the way that the CoreSight / Debug designers anticipated. - This means that even checking EDPRSR has the potential to cause a bus hang - if the target register is unpowered. - - In this case, accessing to the debug registers while they are not powered - is a recipe for disaster; so we need preventing CPU low power states at boot - time or when user enable module at the run time. Please see chapter - "How to use the module" for detailed usage info for this. - - -Device Tree Bindings --------------------- - -See Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt for details. - - -How to use the module ---------------------- - -If you want to enable debugging functionality at boot time, you can add -"coresight_cpu_debug.enable=1" to the kernel command line parameter. - -The driver also can work as module, so can enable the debugging when insmod -module: -# insmod coresight_cpu_debug.ko debug=1 - -When boot time or insmod module you have not enabled the debugging, the driver -uses the debugfs file system to provide a knob to dynamically enable or disable -debugging: - -To enable it, write a '1' into /sys/kernel/debug/coresight_cpu_debug/enable: -# echo 1 > /sys/kernel/debug/coresight_cpu_debug/enable - -To disable it, write a '0' into /sys/kernel/debug/coresight_cpu_debug/enable: -# echo 0 > /sys/kernel/debug/coresight_cpu_debug/enable - -As explained in chapter "Clock and power domain", if you are working on one -platform which has idle states to power off debug logic and the power -controller cannot work well for the request from EDPRCR, then you should -firstly constraint CPU idle states before enable CPU debugging feature; so can -ensure the accessing to debug logic. - -If you want to limit idle states at boot time, you can use "nohlt" or -"cpuidle.off=1" in the kernel command line. - -At the runtime you can disable idle states with below methods: - -It is possible to disable CPU idle states by way of the PM QoS -subsystem, more specifically by using the "/dev/cpu_dma_latency" -interface (see Documentation/power/pm_qos_interface.txt for more -details). As specified in the PM QoS documentation the requested -parameter will stay in effect until the file descriptor is released. -For example: - -# exec 3<> /dev/cpu_dma_latency; echo 0 >&3 -... -Do some work... -... -# exec 3<>- - -The same can also be done from an application program. - -Disable specific CPU's specific idle state from cpuidle sysfs (see -Documentation/cpuidle/sysfs.txt): -# echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable - - -Output format -------------- - -Here is an example of the debugging output format: - -ARM external debug module: -coresight-cpu-debug 850000.debug: CPU[0]: -coresight-cpu-debug 850000.debug: EDPRSR: 00000001 (Power:On DLK:Unlock) -coresight-cpu-debug 850000.debug: EDPCSR: [<ffff00000808e9bc>] handle_IPI+0x174/0x1d8 -coresight-cpu-debug 850000.debug: EDCIDSR: 00000000 -coresight-cpu-debug 850000.debug: EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0) -coresight-cpu-debug 852000.debug: CPU[1]: -coresight-cpu-debug 852000.debug: EDPRSR: 00000001 (Power:On DLK:Unlock) -coresight-cpu-debug 852000.debug: EDPCSR: [<ffff0000087fab34>] debug_notifier_call+0x23c/0x358 -coresight-cpu-debug 852000.debug: EDCIDSR: 00000000 -coresight-cpu-debug 852000.debug: EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0) diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt deleted file mode 100644 index 6f0120c..0000000 --- a/Documentation/trace/coresight.txt +++ /dev/null @@ -1,383 +0,0 @@ - Coresight - HW Assisted Tracing on ARM - ====================================== - - Author: Mathieu Poirier mathieu.poirier@linaro.org - Date: September 11th, 2014 - -Introduction ------------- - -Coresight is an umbrella of technologies allowing for the debugging of ARM -based SoC. It includes solutions for JTAG and HW assisted tracing. This -document is concerned with the latter. - -HW assisted tracing is becoming increasingly useful when dealing with systems -that have many SoCs and other components like GPU and DMA engines. ARM has -developed a HW assisted tracing solution by means of different components, each -being added to a design at synthesis time to cater to specific tracing needs. -Components are generally categorised as source, link and sinks and are -(usually) discovered using the AMBA bus. - -"Sources" generate a compressed stream representing the processor instruction -path based on tracing scenarios as configured by users. From there the stream -flows through the coresight system (via ATB bus) using links that are connecting -the emanating source to a sink(s). Sinks serve as endpoints to the coresight -implementation, either storing the compressed stream in a memory buffer or -creating an interface to the outside world where data can be transferred to a -host without fear of filling up the onboard coresight memory buffer. - -At typical coresight system would look like this: - - ***************************************************************** - **************************** AMBA AXI ****************************===|| - ***************************************************************** || - ^ ^ | || - | | * ** - 0000000 ::::: 0000000 ::::: ::::: @@@@@@@ |||||||||||| - 0 CPU 0<-->: C : 0 CPU 0<-->: C : : C : @ STM @ || System || - |->0000000 : T : |->0000000 : T : : T :<--->@@@@@ || Memory || - | #######<-->: I : | #######<-->: I : : I : @@@<-| |||||||||||| - | # ETM # ::::: | # PTM # ::::: ::::: @ | - | ##### ^ ^ | ##### ^ ! ^ ! . | ||||||||| - | |->### | ! | |->### | ! | ! . | || DAP || - | | # | ! | | # | ! | ! . | ||||||||| - | | . | ! | | . | ! | ! . | | | - | | . | ! | | . | ! | ! . | | * - | | . | ! | | . | ! | ! . | | SWD/ - | | . | ! | | . | ! | ! . | | JTAG - *****************************************************************<-| - *************************** AMBA Debug APB ************************ - ***************************************************************** - | . ! . ! ! . | - | . * . * * . | - ***************************************************************** - ******************** Cross Trigger Matrix (CTM) ******************* - ***************************************************************** - | . ^ . . | - | * ! * * | - ***************************************************************** - ****************** AMBA Advanced Trace Bus (ATB) ****************** - ***************************************************************** - | ! =============== | - | * ===== F =====<---------| - | ::::::::: ==== U ==== - |-->:: CTI ::<!! === N === - | ::::::::: ! == N == - | ^ * == E == - | ! &&&&&&&&& IIIIIII == L == - |------>&& ETB &&<......II I ======= - | ! &&&&&&&&& II I . - | ! I I . - | ! I REP I<.......... - | ! I I - | !!>&&&&&&&&& II I *Source: ARM ltd. - |------>& TPIU &<......II I DAP = Debug Access Port - &&&&&&&&& IIIIIII ETM = Embedded Trace Macrocell - ; PTM = Program Trace Macrocell - ; CTI = Cross Trigger Interface - * ETB = Embedded Trace Buffer - To trace port TPIU= Trace Port Interface Unit - SWD = Serial Wire Debug - -While on target configuration of the components is done via the APB bus, -all trace data are carried out-of-band on the ATB bus. The CTM provides -a way to aggregate and distribute signals between CoreSight components. - -The coresight framework provides a central point to represent, configure and -manage coresight devices on a platform. This first implementation centers on -the basic tracing functionality, enabling components such ETM/PTM, funnel, -replicator, TMC, TPIU and ETB. Future work will enable more -intricate IP blocks such as STM and CTI. - - -Acronyms and Classification ---------------------------- - -Acronyms: - -PTM: Program Trace Macrocell -ETM: Embedded Trace Macrocell -STM: System trace Macrocell -ETB: Embedded Trace Buffer -ITM: Instrumentation Trace Macrocell -TPIU: Trace Port Interface Unit -TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router -TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO -CTI: Cross Trigger Interface - -Classification: - -Source: - ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM -Link: - Funnel, replicator (intelligent or not), TMC-ETR -Sinks: - ETBv1.0, ETB1.1, TPIU, TMC-ETF -Misc: - CTI - - -Device Tree Bindings ----------------------- - -See Documentation/devicetree/bindings/arm/coresight.txt for details. - -As of this writing drivers for ITM, STMs and CTIs are not provided but are -expected to be added as the solution matures. - - -Framework and implementation ----------------------------- - -The coresight framework provides a central point to represent, configure and -manage coresight devices on a platform. Any coresight compliant device can -register with the framework for as long as they use the right APIs: - -struct coresight_device *coresight_register(struct coresight_desc *desc); -void coresight_unregister(struct coresight_device *csdev); - -The registering function is taking a "struct coresight_device *csdev" and -register the device with the core framework. The unregister function takes -a reference to a "struct coresight_device", obtained at registration time. - -If everything goes well during the registration process the new devices will -show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: - -root:~# ls /sys/bus/coresight/devices/ -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm -root:~# - -The functions take a "struct coresight_device", which looks like this: - -struct coresight_desc { - enum coresight_dev_type type; - struct coresight_dev_subtype subtype; - const struct coresight_ops *ops; - struct coresight_platform_data *pdata; - struct device *dev; - const struct attribute_group **groups; -}; - - -The "coresight_dev_type" identifies what the device is, i.e, source link or -sink while the "coresight_dev_subtype" will characterise that type further. - -The "struct coresight_ops" is mandatory and will tell the framework how to -perform base operations related to the components, each component having -a different set of requirement. For that "struct coresight_ops_sink", -"struct coresight_ops_link" and "struct coresight_ops_source" have been -provided. - -The next field, "struct coresight_platform_data *pdata" is acquired by calling -"of_get_coresight_platform_data()", as part of the driver's _probe routine and -"struct device *dev" gets the device reference embedded in the "amba_device": - -static int etm_probe(struct amba_device *adev, const struct amba_id *id) -{ - ... - ... - drvdata->dev = &adev->dev; - ... -} - -Specific class of device (source, link, or sink) have generic operations -that can be performed on them (see "struct coresight_ops"). The -"**groups" is a list of sysfs entries pertaining to operations -specific to that component only. "Implementation defined" customisations are -expected to be accessed and controlled using those entries. - -Last but not least, "struct module *owner" is expected to be set to reflect -the information carried in "THIS_MODULE". - -How to use the tracer modules ------------------------------ - -Before trace collection can start, a coresight sink needs to be identify. -There is no limit on the amount of sinks (nor sources) that can be enabled at -any given moment. As a generic operation, all device pertaining to the sink -class will have an "active" entry in sysfs: - -root:/sys/bus/coresight/devices# ls -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm -root:/sys/bus/coresight/devices# ls 20010000.etb -enable_sink status trigger_cntr -root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink -root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink -1 -root:/sys/bus/coresight/devices# - -At boot time the current etm3x driver will configure the first address -comparator with "_stext" and "_etext", essentially tracing any instruction -that falls within that range. As such "enabling" a source will immediately -trigger a trace capture: - -root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source -root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source -1 -root:/sys/bus/coresight/devices# cat 20010000.etb/status -Depth: 0x2000 -Status: 0x1 -RAM read ptr: 0x0 -RAM wrt ptr: 0x19d3 <----- The write pointer is moving -Trigger cnt: 0x0 -Control: 0x1 -Flush status: 0x0 -Flush ctrl: 0x2001 -root:/sys/bus/coresight/devices# - -Trace collection is stopped the same way: - -root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source -root:/sys/bus/coresight/devices# - -The content of the ETB buffer can be harvested directly from /dev: - -root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \ -of=~/cstrace.bin - -64+0 records in -64+0 records out -32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s -root:/sys/bus/coresight/devices# - -The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32. - -Following is a DS-5 output of an experimental loop that increments a variable up -to a certain value. The example is simple and yet provides a glimpse of the -wealth of possibilities that coresight provides. - -Info Tracing enabled -Instruction 106378866 0x8026B53C E52DE004 false PUSH {lr} -Instruction 0 0x8026B540 E24DD00C false SUB sp,sp,#0xc -Instruction 0 0x8026B544 E3A03000 false MOV r3,#0 -Instruction 0 0x8026B548 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Timestamp Timestamp: 17106715833 -Instruction 319 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 9 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 10 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 6 0x8026B560 EE1D3F30 false MRC p15,#0x0,r3,c13,c0,#1 -Instruction 0 0x8026B564 E1A0100D false MOV r1,sp -Instruction 0 0x8026B568 E3C12D7F false BIC r2,r1,#0x1fc0 -Instruction 0 0x8026B56C E3C2203F false BIC r2,r2,#0x3f -Instruction 0 0x8026B570 E59D1004 false LDR r1,[sp,#4] -Instruction 0 0x8026B574 E59F0010 false LDR r0,[pc,#16] ; [0x8026B58C] = 0x80550368 -Instruction 0 0x8026B578 E592200C false LDR r2,[r2,#0xc] -Instruction 0 0x8026B57C E59221D0 false LDR r2,[r2,#0x1d0] -Instruction 0 0x8026B580 EB07A4CF true BL {pc}+0x1e9344 ; 0x804548c4 -Info Tracing enabled -Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc -Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} -Timestamp Timestamp: 17107041535 - -How to use the STM module -------------------------- - -Using the System Trace Macrocell module is the same as the tracers - the only -difference is that clients are driving the trace capture rather -than the program flow through the code. - -As with any other CoreSight component, specifics about the STM tracer can be -found in sysfs with more information on each entry being found in [1]: - -root@genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm -enable_source hwevent_select port_enable subsystem uevent -hwevent_enable mgmt port_select traceid -root@genericarmv8:~# - -Like any other source a sink needs to be identified and the STM enabled before -being used: - -root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink -root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source - -From there user space applications can request and use channels using the devfs -interface provided for that purpose by the generic STM API: - -root@genericarmv8:~# ls -l /dev/20100000.stm -crw------- 1 root root 10, 61 Jan 3 18:11 /dev/20100000.stm -root@genericarmv8:~# - -Details on how to use the generic STM API can be found here [2]. - -[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -[2]. Documentation/trace/stm.txt - - -Using perf tools ----------------- - -perf can be used to record and analyze trace of programs. - -Execution can be recorded using 'perf record' with the cs_etm event, -specifying the name of the sink to record to, e.g: - - perf record -e cs_etm/@20070000.etr/u --per-thread - -The 'perf report' and 'perf script' commands can be used to analyze execution, -synthesizing instruction and branch events from the instruction trace. -'perf inject' can be used to replace the trace data with the synthesized events. -The --itrace option controls the type and frequency of synthesized events -(see perf documentation). - -Note that only 64-bit programs are currently supported - further work is -required to support instruction decode of 32-bit Arm programs. - - -Generating coverage files for Feedback Directed Optimization: AutoFDO ---------------------------------------------------------------------- - -'perf inject' accepts the --itrace option in which case tracing data is -removed and replaced with the synthesized events. e.g. - - perf inject --itrace --strip -i perf.data -o perf.data.new - -Below is an example of using ARM ETM for autoFDO. It requires autofdo -(https://github.com/google/autofdo) and gcc version 5. The bubble -sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial). - - $ gcc-5 -O3 sort.c -o sort - $ taskset -c 2 ./sort - Bubble sorting array of 30000 elements - 5910 ms - - $ perf record -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 ./sort - Bubble sorting array of 30000 elements - 12543 ms - [ perf record: Woken up 35 times to write data ] - [ perf record: Captured and wrote 69.640 MB perf.data ] - - $ perf inject -i perf.data -o inj.data --itrace=il64 --strip - $ create_gcov --binary=./sort --profile=inj.data --gcov=sort.gcov -gcov_version=1 - $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo - $ taskset -c 2 ./sort_autofdo - Bubble sorting array of 30000 elements - 5806 ms diff --git a/Documentation/trace/coresight/coresight-cpu-debug.txt b/Documentation/trace/coresight/coresight-cpu-debug.txt new file mode 100644 index 0000000..2b9b51c --- /dev/null +++ b/Documentation/trace/coresight/coresight-cpu-debug.txt @@ -0,0 +1,187 @@ + Coresight CPU Debug Module + ========================== + + Author: Leo Yan leo.yan@linaro.org + Date: April 5th, 2017 + +Introduction +------------ + +Coresight CPU debug module is defined in ARMv8-a architecture reference manual +(ARM DDI 0487A.k) Chapter 'Part H: External debug', the CPU can integrate +debug module and it is mainly used for two modes: self-hosted debug and +external debug. Usually the external debug mode is well known as the external +debugger connects with SoC from JTAG port; on the other hand the program can +explore debugging method which rely on self-hosted debug mode, this document +is to focus on this part. + +The debug module provides sample-based profiling extension, which can be used +to sample CPU program counter, secure state and exception level, etc; usually +every CPU has one dedicated debug module to be connected. Based on self-hosted +debug mechanism, Linux kernel can access these related registers from mmio +region when the kernel panic happens. The callback notifier for kernel panic +will dump related registers for every CPU; finally this is good for assistant +analysis for panic. + + +Implementation +-------------- + +- During driver registration, it uses EDDEVID and EDDEVID1 - two device ID + registers to decide if sample-based profiling is implemented or not. On some + platforms this hardware feature is fully or partially implemented; and if + this feature is not supported then registration will fail. + +- At the time this documentation was written, the debug driver mainly relies on + information gathered by the kernel panic callback notifier from three + sampling registers: EDPCSR, EDVIDSR and EDCIDSR: from EDPCSR we can get + program counter; EDVIDSR has information for secure state, exception level, + bit width, etc; EDCIDSR is context ID value which contains the sampled value + of CONTEXTIDR_EL1. + +- The driver supports a CPU running in either AArch64 or AArch32 mode. The + registers naming convention is a bit different between them, AArch64 uses + 'ED' for register prefix (ARM DDI 0487A.k, chapter H9.1) and AArch32 uses + 'DBG' as prefix (ARM DDI 0487A.k, chapter G5.1). The driver is unified to + use AArch64 naming convention. + +- ARMv8-a (ARM DDI 0487A.k) and ARMv7-a (ARM DDI 0406C.b) have different + register bits definition. So the driver consolidates two difference: + + If PCSROffset=0b0000, on ARMv8-a the feature of EDPCSR is not implemented; + but ARMv7-a defines "PCSR samples are offset by a value that depends on the + instruction set state". For ARMv7-a, the driver checks furthermore if CPU + runs with ARM or thumb instruction set and calibrate PCSR value, the + detailed description for offset is in ARMv7-a ARM (ARM DDI 0406C.b) chapter + C11.11.34 "DBGPCSR, Program Counter Sampling Register". + + If PCSROffset=0b0010, ARMv8-a defines "EDPCSR implemented, and samples have + no offset applied and do not sample the instruction set state in AArch32 + state". So on ARMv8 if EDDEVID1.PCSROffset is 0b0010 and the CPU operates + in AArch32 state, EDPCSR is not sampled; when the CPU operates in AArch64 + state EDPCSR is sampled and no offset are applied. + + +Clock and power domain +---------------------- + +Before accessing debug registers, we should ensure the clock and power domain +have been enabled properly. In ARMv8-a ARM (ARM DDI 0487A.k) chapter 'H9.1 +Debug registers', the debug registers are spread into two domains: the debug +domain and the CPU domain. + + +---------------+ + | | + | | + +----------+--+ | + dbg_clock -->| |**| |<-- cpu_clock + | Debug |**| CPU | + dbg_power_domain -->| |**| |<-- cpu_power_domain + +----------+--+ | + | | + | | + +---------------+ + +For debug domain, the user uses DT binding "clocks" and "power-domains" to +specify the corresponding clock source and power supply for the debug logic. +The driver calls the pm_runtime_{put|get} operations as needed to handle the +debug power domain. + +For CPU domain, the different SoC designs have different power management +schemes and finally this heavily impacts external debug module. So we can +divide into below cases: + +- On systems with a sane power controller which can behave correctly with + respect to CPU power domain, the CPU power domain can be controlled by + register EDPRCR in driver. The driver firstly writes bit EDPRCR.COREPURQ + to power up the CPU, and then writes bit EDPRCR.CORENPDRQ for emulation + of CPU power down. As result, this can ensure the CPU power domain is + powered on properly during the period when access debug related registers; + +- Some designs will power down an entire cluster if all CPUs on the cluster + are powered down - including the parts of the debug registers that should + remain powered in the debug power domain. The bits in EDPRCR are not + respected in these cases, so these designs do not support debug over + power down in the way that the CoreSight / Debug designers anticipated. + This means that even checking EDPRSR has the potential to cause a bus hang + if the target register is unpowered. + + In this case, accessing to the debug registers while they are not powered + is a recipe for disaster; so we need preventing CPU low power states at boot + time or when user enable module at the run time. Please see chapter + "How to use the module" for detailed usage info for this. + + +Device Tree Bindings +-------------------- + +See Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt for details. + + +How to use the module +--------------------- + +If you want to enable debugging functionality at boot time, you can add +"coresight_cpu_debug.enable=1" to the kernel command line parameter. + +The driver also can work as module, so can enable the debugging when insmod +module: +# insmod coresight_cpu_debug.ko debug=1 + +When boot time or insmod module you have not enabled the debugging, the driver +uses the debugfs file system to provide a knob to dynamically enable or disable +debugging: + +To enable it, write a '1' into /sys/kernel/debug/coresight_cpu_debug/enable: +# echo 1 > /sys/kernel/debug/coresight_cpu_debug/enable + +To disable it, write a '0' into /sys/kernel/debug/coresight_cpu_debug/enable: +# echo 0 > /sys/kernel/debug/coresight_cpu_debug/enable + +As explained in chapter "Clock and power domain", if you are working on one +platform which has idle states to power off debug logic and the power +controller cannot work well for the request from EDPRCR, then you should +firstly constraint CPU idle states before enable CPU debugging feature; so can +ensure the accessing to debug logic. + +If you want to limit idle states at boot time, you can use "nohlt" or +"cpuidle.off=1" in the kernel command line. + +At the runtime you can disable idle states with below methods: + +It is possible to disable CPU idle states by way of the PM QoS +subsystem, more specifically by using the "/dev/cpu_dma_latency" +interface (see Documentation/power/pm_qos_interface.txt for more +details). As specified in the PM QoS documentation the requested +parameter will stay in effect until the file descriptor is released. +For example: + +# exec 3<> /dev/cpu_dma_latency; echo 0 >&3 +... +Do some work... +... +# exec 3<>- + +The same can also be done from an application program. + +Disable specific CPU's specific idle state from cpuidle sysfs (see +Documentation/cpuidle/sysfs.txt): +# echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable + + +Output format +------------- + +Here is an example of the debugging output format: + +ARM external debug module: +coresight-cpu-debug 850000.debug: CPU[0]: +coresight-cpu-debug 850000.debug: EDPRSR: 00000001 (Power:On DLK:Unlock) +coresight-cpu-debug 850000.debug: EDPCSR: [<ffff00000808e9bc>] handle_IPI+0x174/0x1d8 +coresight-cpu-debug 850000.debug: EDCIDSR: 00000000 +coresight-cpu-debug 850000.debug: EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0) +coresight-cpu-debug 852000.debug: CPU[1]: +coresight-cpu-debug 852000.debug: EDPRSR: 00000001 (Power:On DLK:Unlock) +coresight-cpu-debug 852000.debug: EDPCSR: [<ffff0000087fab34>] debug_notifier_call+0x23c/0x358 +coresight-cpu-debug 852000.debug: EDCIDSR: 00000000 +coresight-cpu-debug 852000.debug: EDVIDSR: 90000000 (State:Non-secure Mode:EL1/0 Width:64bits VMID:0) diff --git a/Documentation/trace/coresight/coresight.txt b/Documentation/trace/coresight/coresight.txt new file mode 100644 index 0000000..6f0120c --- /dev/null +++ b/Documentation/trace/coresight/coresight.txt @@ -0,0 +1,383 @@ + Coresight - HW Assisted Tracing on ARM + ====================================== + + Author: Mathieu Poirier mathieu.poirier@linaro.org + Date: September 11th, 2014 + +Introduction +------------ + +Coresight is an umbrella of technologies allowing for the debugging of ARM +based SoC. It includes solutions for JTAG and HW assisted tracing. This +document is concerned with the latter. + +HW assisted tracing is becoming increasingly useful when dealing with systems +that have many SoCs and other components like GPU and DMA engines. ARM has +developed a HW assisted tracing solution by means of different components, each +being added to a design at synthesis time to cater to specific tracing needs. +Components are generally categorised as source, link and sinks and are +(usually) discovered using the AMBA bus. + +"Sources" generate a compressed stream representing the processor instruction +path based on tracing scenarios as configured by users. From there the stream +flows through the coresight system (via ATB bus) using links that are connecting +the emanating source to a sink(s). Sinks serve as endpoints to the coresight +implementation, either storing the compressed stream in a memory buffer or +creating an interface to the outside world where data can be transferred to a +host without fear of filling up the onboard coresight memory buffer. + +At typical coresight system would look like this: + + ***************************************************************** + **************************** AMBA AXI ****************************===|| + ***************************************************************** || + ^ ^ | || + | | * ** + 0000000 ::::: 0000000 ::::: ::::: @@@@@@@ |||||||||||| + 0 CPU 0<-->: C : 0 CPU 0<-->: C : : C : @ STM @ || System || + |->0000000 : T : |->0000000 : T : : T :<--->@@@@@ || Memory || + | #######<-->: I : | #######<-->: I : : I : @@@<-| |||||||||||| + | # ETM # ::::: | # PTM # ::::: ::::: @ | + | ##### ^ ^ | ##### ^ ! ^ ! . | ||||||||| + | |->### | ! | |->### | ! | ! . | || DAP || + | | # | ! | | # | ! | ! . | ||||||||| + | | . | ! | | . | ! | ! . | | | + | | . | ! | | . | ! | ! . | | * + | | . | ! | | . | ! | ! . | | SWD/ + | | . | ! | | . | ! | ! . | | JTAG + *****************************************************************<-| + *************************** AMBA Debug APB ************************ + ***************************************************************** + | . ! . ! ! . | + | . * . * * . | + ***************************************************************** + ******************** Cross Trigger Matrix (CTM) ******************* + ***************************************************************** + | . ^ . . | + | * ! * * | + ***************************************************************** + ****************** AMBA Advanced Trace Bus (ATB) ****************** + ***************************************************************** + | ! =============== | + | * ===== F =====<---------| + | ::::::::: ==== U ==== + |-->:: CTI ::<!! === N === + | ::::::::: ! == N == + | ^ * == E == + | ! &&&&&&&&& IIIIIII == L == + |------>&& ETB &&<......II I ======= + | ! &&&&&&&&& II I . + | ! I I . + | ! I REP I<.......... + | ! I I + | !!>&&&&&&&&& II I *Source: ARM ltd. + |------>& TPIU &<......II I DAP = Debug Access Port + &&&&&&&&& IIIIIII ETM = Embedded Trace Macrocell + ; PTM = Program Trace Macrocell + ; CTI = Cross Trigger Interface + * ETB = Embedded Trace Buffer + To trace port TPIU= Trace Port Interface Unit + SWD = Serial Wire Debug + +While on target configuration of the components is done via the APB bus, +all trace data are carried out-of-band on the ATB bus. The CTM provides +a way to aggregate and distribute signals between CoreSight components. + +The coresight framework provides a central point to represent, configure and +manage coresight devices on a platform. This first implementation centers on +the basic tracing functionality, enabling components such ETM/PTM, funnel, +replicator, TMC, TPIU and ETB. Future work will enable more +intricate IP blocks such as STM and CTI. + + +Acronyms and Classification +--------------------------- + +Acronyms: + +PTM: Program Trace Macrocell +ETM: Embedded Trace Macrocell +STM: System trace Macrocell +ETB: Embedded Trace Buffer +ITM: Instrumentation Trace Macrocell +TPIU: Trace Port Interface Unit +TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router +TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO +CTI: Cross Trigger Interface + +Classification: + +Source: + ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM +Link: + Funnel, replicator (intelligent or not), TMC-ETR +Sinks: + ETBv1.0, ETB1.1, TPIU, TMC-ETF +Misc: + CTI + + +Device Tree Bindings +---------------------- + +See Documentation/devicetree/bindings/arm/coresight.txt for details. + +As of this writing drivers for ITM, STMs and CTIs are not provided but are +expected to be added as the solution matures. + + +Framework and implementation +---------------------------- + +The coresight framework provides a central point to represent, configure and +manage coresight devices on a platform. Any coresight compliant device can +register with the framework for as long as they use the right APIs: + +struct coresight_device *coresight_register(struct coresight_desc *desc); +void coresight_unregister(struct coresight_device *csdev); + +The registering function is taking a "struct coresight_device *csdev" and +register the device with the core framework. The unregister function takes +a reference to a "struct coresight_device", obtained at registration time. + +If everything goes well during the registration process the new devices will +show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: + +root:~# ls /sys/bus/coresight/devices/ +replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm +20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm +root:~# + +The functions take a "struct coresight_device", which looks like this: + +struct coresight_desc { + enum coresight_dev_type type; + struct coresight_dev_subtype subtype; + const struct coresight_ops *ops; + struct coresight_platform_data *pdata; + struct device *dev; + const struct attribute_group **groups; +}; + + +The "coresight_dev_type" identifies what the device is, i.e, source link or +sink while the "coresight_dev_subtype" will characterise that type further. + +The "struct coresight_ops" is mandatory and will tell the framework how to +perform base operations related to the components, each component having +a different set of requirement. For that "struct coresight_ops_sink", +"struct coresight_ops_link" and "struct coresight_ops_source" have been +provided. + +The next field, "struct coresight_platform_data *pdata" is acquired by calling +"of_get_coresight_platform_data()", as part of the driver's _probe routine and +"struct device *dev" gets the device reference embedded in the "amba_device": + +static int etm_probe(struct amba_device *adev, const struct amba_id *id) +{ + ... + ... + drvdata->dev = &adev->dev; + ... +} + +Specific class of device (source, link, or sink) have generic operations +that can be performed on them (see "struct coresight_ops"). The +"**groups" is a list of sysfs entries pertaining to operations +specific to that component only. "Implementation defined" customisations are +expected to be accessed and controlled using those entries. + +Last but not least, "struct module *owner" is expected to be set to reflect +the information carried in "THIS_MODULE". + +How to use the tracer modules +----------------------------- + +Before trace collection can start, a coresight sink needs to be identify. +There is no limit on the amount of sinks (nor sources) that can be enabled at +any given moment. As a generic operation, all device pertaining to the sink +class will have an "active" entry in sysfs: + +root:/sys/bus/coresight/devices# ls +replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm +20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm +root:/sys/bus/coresight/devices# ls 20010000.etb +enable_sink status trigger_cntr +root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink +root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink +1 +root:/sys/bus/coresight/devices# + +At boot time the current etm3x driver will configure the first address +comparator with "_stext" and "_etext", essentially tracing any instruction +that falls within that range. As such "enabling" a source will immediately +trigger a trace capture: + +root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source +root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source +1 +root:/sys/bus/coresight/devices# cat 20010000.etb/status +Depth: 0x2000 +Status: 0x1 +RAM read ptr: 0x0 +RAM wrt ptr: 0x19d3 <----- The write pointer is moving +Trigger cnt: 0x0 +Control: 0x1 +Flush status: 0x0 +Flush ctrl: 0x2001 +root:/sys/bus/coresight/devices# + +Trace collection is stopped the same way: + +root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source +root:/sys/bus/coresight/devices# + +The content of the ETB buffer can be harvested directly from /dev: + +root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \ +of=~/cstrace.bin + +64+0 records in +64+0 records out +32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s +root:/sys/bus/coresight/devices# + +The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32. + +Following is a DS-5 output of an experimental loop that increments a variable up +to a certain value. The example is simple and yet provides a glimpse of the +wealth of possibilities that coresight provides. + +Info Tracing enabled +Instruction 106378866 0x8026B53C E52DE004 false PUSH {lr} +Instruction 0 0x8026B540 E24DD00C false SUB sp,sp,#0xc +Instruction 0 0x8026B544 E3A03000 false MOV r3,#0 +Instruction 0 0x8026B548 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Timestamp Timestamp: 17106715833 +Instruction 319 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Instruction 9 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Instruction 10 0x8026B54C E59D3004 false LDR r3,[sp,#4] +Instruction 0 0x8026B550 E3530004 false CMP r3,#4 +Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 +Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] +Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c +Instruction 6 0x8026B560 EE1D3F30 false MRC p15,#0x0,r3,c13,c0,#1 +Instruction 0 0x8026B564 E1A0100D false MOV r1,sp +Instruction 0 0x8026B568 E3C12D7F false BIC r2,r1,#0x1fc0 +Instruction 0 0x8026B56C E3C2203F false BIC r2,r2,#0x3f +Instruction 0 0x8026B570 E59D1004 false LDR r1,[sp,#4] +Instruction 0 0x8026B574 E59F0010 false LDR r0,[pc,#16] ; [0x8026B58C] = 0x80550368 +Instruction 0 0x8026B578 E592200C false LDR r2,[r2,#0xc] +Instruction 0 0x8026B57C E59221D0 false LDR r2,[r2,#0x1d0] +Instruction 0 0x8026B580 EB07A4CF true BL {pc}+0x1e9344 ; 0x804548c4 +Info Tracing enabled +Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc +Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} +Timestamp Timestamp: 17107041535 + +How to use the STM module +------------------------- + +Using the System Trace Macrocell module is the same as the tracers - the only +difference is that clients are driving the trace capture rather +than the program flow through the code. + +As with any other CoreSight component, specifics about the STM tracer can be +found in sysfs with more information on each entry being found in [1]: + +root@genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm +enable_source hwevent_select port_enable subsystem uevent +hwevent_enable mgmt port_select traceid +root@genericarmv8:~# + +Like any other source a sink needs to be identified and the STM enabled before +being used: + +root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink +root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source + +From there user space applications can request and use channels using the devfs +interface provided for that purpose by the generic STM API: + +root@genericarmv8:~# ls -l /dev/20100000.stm +crw------- 1 root root 10, 61 Jan 3 18:11 /dev/20100000.stm +root@genericarmv8:~# + +Details on how to use the generic STM API can be found here [2]. + +[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm +[2]. Documentation/trace/stm.txt + + +Using perf tools +---------------- + +perf can be used to record and analyze trace of programs. + +Execution can be recorded using 'perf record' with the cs_etm event, +specifying the name of the sink to record to, e.g: + + perf record -e cs_etm/@20070000.etr/u --per-thread + +The 'perf report' and 'perf script' commands can be used to analyze execution, +synthesizing instruction and branch events from the instruction trace. +'perf inject' can be used to replace the trace data with the synthesized events. +The --itrace option controls the type and frequency of synthesized events +(see perf documentation). + +Note that only 64-bit programs are currently supported - further work is +required to support instruction decode of 32-bit Arm programs. + + +Generating coverage files for Feedback Directed Optimization: AutoFDO +--------------------------------------------------------------------- + +'perf inject' accepts the --itrace option in which case tracing data is +removed and replaced with the synthesized events. e.g. + + perf inject --itrace --strip -i perf.data -o perf.data.new + +Below is an example of using ARM ETM for autoFDO. It requires autofdo +(https://github.com/google/autofdo) and gcc version 5. The bubble +sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial). + + $ gcc-5 -O3 sort.c -o sort + $ taskset -c 2 ./sort + Bubble sorting array of 30000 elements + 5910 ms + + $ perf record -e cs_etm/@20070000.etr/u --per-thread taskset -c 2 ./sort + Bubble sorting array of 30000 elements + 12543 ms + [ perf record: Woken up 35 times to write data ] + [ perf record: Captured and wrote 69.640 MB perf.data ] + + $ perf inject -i perf.data -o inj.data --itrace=il64 --strip + $ create_gcov --binary=./sort --profile=inj.data --gcov=sort.gcov -gcov_version=1 + $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo + $ taskset -c 2 ./sort_autofdo + Bubble sorting array of 30000 elements + 5806 ms diff --git a/MAINTAINERS b/MAINTAINERS index 205c8fc..7ee1fdc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1331,8 +1331,8 @@ M: Mathieu Poirier mathieu.poirier@linaro.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/hwtracing/coresight/* -F: Documentation/trace/coresight.txt -F: Documentation/trace/coresight-cpu-debug.txt +F: Documentation/trace/coresight/coresight.txt +F: Documentation/trace/coresight/coresight-cpu-debug.txt F: Documentation/devicetree/bindings/arm/coresight.txt F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*