The current method for allocating trace source ID values to sources is to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10). The STM is allocated ID 0x1.
This fixed algorithm is used in both the CoreSight driver code, and by perf when writing the trace metadata in the AUXTRACE_INFO record.
The method needs replacing as currently:- 1. It is inefficient in using available IDs. 2. Does not scale to larger systems with many cores and the algorithm has no limits so will generate invalid trace IDs for cpu number > 44.
Additionally requirements to allocate additional system IDs on some systems have been seen.
This patch set introduces an API that allows the allocation of trace IDs in a dynamic manner.
Architecturally reserved IDs are never allocated, and the system is limited to allocating only valid IDs.
Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use the new API.
For the ETMx.x devices IDs are allocated on certain events a) When using sysfs, an ID will be allocated on hardware enable, or a read of sysfs TRCTRACEID register and freed when the sysfs reset is written.
b) When using perf, ID is allocated on during setup AUX event, and freed on event free. IDs are communicated using the AUX_OUTPUT_HW_ID packet. The ID allocator is notified when perf sessions start and stop so CPU based IDs are kept constant throughout any perf session.
Note: This patchset breaks some backward compatibility for perf record and perf report.
The version of the AUXTRACE_INFO has been updated to reflect the fact that the trace source IDs are generated differently. This will mean older versions of perf report cannot decode the newer file.
Appies to coresight/next [30a0b95b1335]
Changes since v4: 1) update to ensure that compiling after each individual patch added still works - ie. git bisect not broken through the patchset..
2) Revision to some of the now redundant code in cs-etm (James)
3) Comments and other minor fixes requested by Suzuki.
Changes since v3: 1) Fixed aarch32 build error in ETM3.x driver. Reported-by: kernel test robot lkp@intel.com
Changes since v2: 1) Improved backward compatibility: (requested by James)
Using the new version of perf on an old kernel will generate a usable file legacy metadata values are set by the new perf and will be used if mew ID packets are not present in the file.
Using an older version of perf / simpleperf on an updated kernel may still work. The trace ID allocator has been updated to use the legacy ID values where possible, so generated file and used trace IDs will match up to the point where the legacy algorithm is broken anyway.
2) Various changes to the ID allocator and ID packet format. (suggested by Suzuki)
3) per CPU ID info in allocator now stored as atomic type to allow a passive read without taking the allocator spinlock. perf flow now allocates and releases ID values in setup_aux / free_event. Device enable and event enable use the passive read to set the allocated values. This simplifies the locking mechanisms on the perf run and fixes issues that arose with locking dependencies.
Changes since v1: (after feedback & discussion with Mathieu & Suzuki).
1) API has changed. The global trace ID map is managed internally, so it is no longer passed in to the API functions.
2) perf record does not use sysfs to find the trace IDs. These are now output as AUX_OUTPUT_HW_ID events. The drivers, perf record, and perf report have been updated accordingly to generate and handle these events.
Mike Leach (14): coresight: trace-id: Add API to dynamically assign Trace ID values coresight: Remove obsolete Trace ID unniqueness checks coresight: perf: traceid: Add perf ID allocation and notifiers coresight: stm: Update STM driver to use Trace ID API coresight: etm4x: Update ETM4 driver to use Trace ID API coresight: etm3x: Update ETM3 driver to use Trace ID API coresight: etmX.X: stm: Remove trace_id() callback coresight: trace id: Remove legacy get trace ID function. perf: cs-etm: Move mapping of Trace ID and cpu into helper function perf: cs-etm: Update record event to use new Trace ID protocol kernel: events: Export perf_report_aux_output_id() perf: cs-etm: Handle PERF_RECORD_AUX_OUTPUT_HW_ID packet coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID coresight: trace-id: Add debug & test macros to Trace ID allocation
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 49 +-- .../hwtracing/coresight/coresight-etm-perf.c | 23 ++ drivers/hwtracing/coresight/coresight-etm.h | 3 +- .../coresight/coresight-etm3x-core.c | 90 +++-- .../coresight/coresight-etm3x-sysfs.c | 27 +- .../coresight/coresight-etm4x-core.c | 70 +++- .../coresight/coresight-etm4x-sysfs.c | 27 +- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + drivers/hwtracing/coresight/coresight-stm.c | 49 +-- .../hwtracing/coresight/coresight-trace-id.c | 258 ++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 154 ++++++++ include/linux/coresight-pmu.h | 34 +- include/linux/coresight.h | 3 - kernel/events/core.c | 1 + tools/include/linux/coresight-pmu.h | 48 ++- tools/perf/arch/arm/util/cs-etm.c | 21 +- .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 + tools/perf/util/cs-etm.c | 328 +++++++++++++++--- tools/perf/util/cs-etm.h | 14 +- 20 files changed, 980 insertions(+), 231 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h