On Sun, Nov 15, 2026 at 08:32:16PM +0530, Dev Jain wrote:
[...]
Make opportunistic high-order AUX allocations no-reclaim: When !(event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) and order > 0, clear __GFP_RECLAIM (and add __GFP_NOMEMALLOC, matching SLUB's allocate_slab() and GFP_TRANSHUGE_LIGHT):
gfp_t gfp = PERF_AUX_GFP;
if (order && !has_no_sg) gfp = (PERF_AUX_GFP | __GFP_NOMEMALLOC) & ~__GFP_RECLAIM;
Thanks for your reply.
This looks like the correct solution. Note commit 0e05a469c294 ("mm/page_alloc: avoid direct reclaim and compaction for costly __GFP_NORETRY allocations") post which the regression you report should reduce drastically. It only removes GFP_DIRECT_RECLAIM flag, I assume you are seeing latency even due to reclaim/compaction daemon wakeups.
So instead of enhancing this commit even more by making a page-allocator change, I would rather make your proposed change on the perf side to keep it simple. This should completely solve the problem.
Thanks a lot, Dev!
The revert (526d945ad9c0) and 0e05a469c294 are now in mainline. My tests show significantly lower PSI on v7.4-rc3, consistent with the expected benefit of 0e05a469c294.
The following PSI some values are totals in milliseconds across runs 2-10 (nine runs), excluding the first run of each case to avoid glitches caused by its proximity to lauching the pressure workload:
Memory usage v7.4-rc1 v7.4-rc3 rc3 + perf patch [1] 90% 0.000 0.000 0.000 95% 21.781 0.000 2.061 100% 27.946 0.000 0.000
My perf patch [1] reduces pageoutrun and compact_daemon_wake, but increases pgscan_kswapd at 95%. The following totals compare v7.4-rc3 and v7.4-rc + my patch, also across runs 2-10:
Usage pageoutrun compact_daemon_wake pgscan_kswapd 90% 58 -> 0 57 -> 0 1,932 -> 0 95% 3 -> 2 2 -> 1 9,664 -> 148,079 100% 40 -> 1 40 -> 0 11,616 -> 1,918
I would wait for Yabin's testing before deciding whether to proceed with the additional perf changes. In my patch, changing order 0 to __GFP_RETRY_MAYFAIL needs care: it may reduce allocation failures when free memory is scarce, at the cost of longer reclaim stalls and higher PSI.
Yabin, could you test the current mainline (or backport 526d945ad9c0/0e05a469c294) and confirm whether it resolves the PSI issue on Android? If still see the reclaim pressure or observe AUX allocation failures, it may also be worth testing patch [1].
Thanks, Leo
[1] https://lore.kernel.org/lkml/20261109-perf_aux_alloc_optimize_psi-v1-1-d56ac...