This will allow sessions with more than CORESIGHT_TRACE_IDS_MAX ETMs as long as there are fewer than that many ETMs connected to each sink.
Each sink owns its own trace ID map, and any Perf session connecting to that sink will allocate from it, even if the sink is currently in use by other users. This is similar to the existing behavior where the dynamic trace IDs are constant as long as there is any concurrent Perf session active. It's not completely optimal because slightly more IDs will be used than necessary, but the optimal solution involves tracking the PIDs of each session and allocating ID maps based on the session owner. This is difficult to do with the combination of per-thread and per-cpu modes and some scheduling issues. The complexity of this isn't likely to worth it because even with multiple users they'd just see a difference in the ordering of ID allocations rather than hitting any limits (unless the hardware does have too many ETMs connected to one sink).
Per-thread mode works but only until there are any overlapping IDs, at which point Perf will error out. Both per-thread mode and sysfs mode are left to future changes, but both can be added on top of this initial implementation and only sysfs mode requires further driver changes.
The HW_ID version field hasn't been bumped in order to not break Perf which already has an error condition for other values of that field. Instead a new minor version has been added which signifies that there are new fields but the old fields are backwards compatible.
James Clark (17): perf cs-etm: Print error for new PERF_RECORD_AUX_OUTPUT_HW_ID versions perf auxtrace: Allow number of queues to be specified perf: cs-etm: Create decoders after both AUX and HW_ID search passes perf: cs-etm: Allocate queues for all CPUs perf: cs-etm: Move traceid_list to each queue perf: cs-etm: Create decoders based on the trace ID mappings perf: cs-etm: Support version 0.1 of HW_ID packets coresight: Remove unused stubs coresight: Clarify comments around the PID of the sink owner coresight: Move struct coresight_trace_id_map to common header coresight: Expose map argument in trace ID API coresight: Make CPU id map a property of a trace ID map coresight: Pass trace ID map into source enable coresight: Use per-sink trace ID maps for Perf sessions coresight: Remove pending trace ID release mechanism coresight: Re-emit trace IDs when the sink changes in per-thread mode coresight: Emit HW_IDs for all ETMs that are using the sink
drivers/hwtracing/coresight/coresight-core.c | 10 + drivers/hwtracing/coresight/coresight-dummy.c | 3 +- .../hwtracing/coresight/coresight-etm-perf.c | 82 ++- .../hwtracing/coresight/coresight-etm-perf.h | 20 +- .../coresight/coresight-etm3x-core.c | 14 +- .../coresight/coresight-etm4x-core.c | 14 +- drivers/hwtracing/coresight/coresight-stm.c | 3 +- drivers/hwtracing/coresight/coresight-sysfs.c | 3 +- .../hwtracing/coresight/coresight-tmc-etr.c | 5 +- drivers/hwtracing/coresight/coresight-tmc.h | 5 +- drivers/hwtracing/coresight/coresight-tpdm.c | 3 +- .../hwtracing/coresight/coresight-trace-id.c | 107 +-- .../hwtracing/coresight/coresight-trace-id.h | 57 +- include/linux/coresight-pmu.h | 17 +- include/linux/coresight.h | 20 +- tools/include/linux/coresight-pmu.h | 17 +- tools/perf/util/auxtrace.c | 9 +- tools/perf/util/auxtrace.h | 1 + .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 28 +- tools/perf/util/cs-etm.c | 617 ++++++++++++------ tools/perf/util/cs-etm.h | 2 +- 21 files changed, 633 insertions(+), 404 deletions(-)