This series focuses on CoreSight path power management. The changes can be divided into four parts for review:
Patches 01 - 10: Preparison for CPU PM: Fix source disabling on idr_alloc failure. Fix helper enable failure handling. Refactor CPU ID stored in csdev. Move CPU lock to sysfs layer. Move per-CPU source pointer from etm-perf to core layer. Refactor etm-perf to retrieve source via per-CPU's event data for lockless and get source reference during AUX setup. Patches 11 - 13: Refactor CPU idle flow managed in the CoreSight core layer. Patches 14 - 23: Refactor path enable / disable with range, control path during CPU idle. Patches 24 - 25: Support the sink (TRBE) control during CPU idle. Patches 26 - 28: Move CPU hotplug into the core layer, and fix sysfs mode for hotplug.
This series is rebased on the coresight-next branch and has been verified on Juno-r2 (ETM + ETR) and FVP RevC (ETE + TRBE). Built successfully for armv7 (ARCH=arm).
--- Changes in v14: - Fixed percpu_pm_failed write with per_cpu(percpu_pm_faile, cpu). - Link to v13: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_impro...
Changes in v13: - Cleared percpu_pm_failed flag when source is unregistered (Suzuki). - Rebased on latest coresight-next. - Link to v12: https://lore.kernel.org/r/20260511-arm_coresight_path_power_management_impro...
Changes in v12: - Added comments on coresight_{get|put)_percpu_source_ref (Suzuki). - Refined failure handling in path enable (Suzuki). - Added coresight_is_software_source() helper (Suzuki). - Reordered taking ref on csdev and its parent in patch 07. - Define the enum mode with bit flags. - Minor improvements on commit logs. - Rebased on lastest coresight-next. - Link to v11: https://lore.kernel.org/r/20260501-arm_coresight_path_power_management_impro...
Changes in v11: - Moved per-CPU source pointer from etm-perf to core (Suzuki). - Added grabbing/ungrabbing csdev for device reference (Suzuki). - Minor refine for error handling and logs in CPU PM (James). - Refactored etm-perf with fetching path/source from event data (Suzuki). - Fixed Helper error handling (sashiko). - Added Jie's test tag (thanks!). - Minor improvement for comments and commit logs. - Link to v10: https://lore.kernel.org/r/20260405-arm_coresight_path_power_management_impro...
Changes in v10: - Removed redundant checks in ETMv4 PM callbacks (sashiko). - Added a new const structure etm4_cs_pm_ops (sashiko). - Used fine-grained spinlock on sysfs_active_config (sashiko). - Blocked notification after failures in save / restore to avoid lockups. - Changed Change CPUHP_AP_ARM_CORESIGHT_STARTING to CPUHP_AP_ARM_CORESIGHT_ONLINE so that the CPU hotplug callback runs in the thread context (sashiko). - Link to v9: https://lore.kernel.org/r/20260401-arm_coresight_path_power_management_impro...
Signed-off-by: Leo Yan leo.yan@arm.com
--- Jie Gan (1): coresight: Fix source not disabled on idr_alloc_u32 failure
Leo Yan (26): coresight: Handle helper enable failure properly coresight: Extract device init into coresight_init_device() coresight: Populate CPU ID into coresight_device coresight: Remove .cpu_id() callback from source ops coresight: Take hotplug lock in enable_source_store() for Sysfs mode coresight: perf: Retrieve path and source from event data coresight: Take a reference on csdev coresight: Move per-CPU source pointer to core layer coresight: Take per-CPU source reference during AUX setup coresight: Register CPU PM notifier in core layer coresight: etm4x: Hook CPU PM callbacks coresight: etm4x: Remove redundant checks in PM save and restore coresight: syscfg: Use IRQ-safe spinlock to protect active variables coresight: Disable source helpers in coresight_disable_path() coresight: Control path with range coresight: Use helpers to fetch first and last nodes coresight: Introduce coresight_enable_source() helper coresight: Save active path for system tracers coresight: etm4x: Set active path on target CPU coresight: etm3x: Set active path on target CPU coresight: sysfs: Use source's path pointer for path control coresight: Control path during CPU idle coresight: Add PM callbacks for sink device coresight: sysfs: Increment refcount only for software source coresight: Move CPU hotplug callbacks to core layer coresight: sysfs: Validate CPU online status for per-CPU sources
Yabin Cui (1): coresight: trbe: Save and restore state across CPU low power state
drivers/hwtracing/coresight/coresight-catu.c | 2 +- drivers/hwtracing/coresight/coresight-core.c | 551 +++++++++++++++++++-- drivers/hwtracing/coresight/coresight-cti-core.c | 9 +- drivers/hwtracing/coresight/coresight-etm-perf.c | 288 ++++++----- drivers/hwtracing/coresight/coresight-etm3x-core.c | 73 +-- drivers/hwtracing/coresight/coresight-etm4x-core.c | 166 ++----- drivers/hwtracing/coresight/coresight-priv.h | 6 + drivers/hwtracing/coresight/coresight-syscfg.c | 38 +- drivers/hwtracing/coresight/coresight-syscfg.h | 2 + drivers/hwtracing/coresight/coresight-sysfs.c | 131 ++--- drivers/hwtracing/coresight/coresight-trbe.c | 61 ++- include/linux/coresight.h | 27 +- include/linux/cpuhotplug.h | 2 +- 13 files changed, 874 insertions(+), 482 deletions(-) --- base-commit: f4526ffee6ff9f5845b430957417149eded74bf3 change-id: 20251104-arm_coresight_path_power_management_improvement-dab4966f8280
Best regards,