This series adds support for the trace performance monitoring and diagnostics hardware (TPDM and TPDA). It is composed of two major elements. a) Changes for original coresight framework to support for TPDM and TPDA. b) Add driver code for TPDM and TPDA.
Introduction of changes for original coresight framework Support TPDM as new coresight source. Since only STM and ETM are supported as coresight source originally. TPDM is a newly added coresight source. We need to change the original way of saving coresight path to support more types source for coresight driver. The following patch is to add support more coresight sources. coresight: core: Use IDR for non-cpu bound sources' paths.
Introduction of TPDM and TPDA TPDM - The trace performance monitoring and diagnostics monitor or TPDM in short serves as data collection component for various dataset types specified in the QPMDA(Qualcomm performance monitoring and diagnostics architecture) spec. The primary use case of the TPDM is to collect data from different data sources and send it to a TPDA for packetization, timestamping and funneling. Coresight: Add coresight TPDM source driver dt-bindings: arm: Adds CoreSight TPDM hardware definitions coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support
TPDA - The trace performance monitoring and diagnostics aggregator or TPDA in short serves as an arbitration and packetization engine for the performance monitoring and diagnostics network as specified in the QPMDA (Qualcomm performance monitoring and diagnostics architecture) specification. The primary use case of the TPDA is to provide packetization, funneling and timestamping of Monitor data as specified in the QPMDA specification. The following patch is to add driver for TPDA. Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions
The last patch of this series is a device tree modification, which add the TPDM and TPDA configuration to device tree for validating. ARM: dts: msm: Add tpdm mm/prng for sm8250
Once this series patches are applied properly, the tpdm and tpda nodes should be observed at the coresight path /sys/bus/coresight/devices e.g. /sys/bus/coresight/devices # ls -l | grep tpd tpda0 -> ../../../devices/platform/soc@0/6004000.tpda/tpda0 tpdm0 -> ../../../devices/platform/soc@0/6c08000.mm.tpdm/tpdm0
We can use the commands are similar to the below to validate TPDMs. Enable coresight sink first.
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test The test data will be collected in the coresight sink which is enabled. If rwp register of the sink is keeping updating when do integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM to sink.
There must be a tpda between tpdm and the sink. When there are some other trace event hw components in the same HW block with tpdm, tpdm and these hw components will connect to the coresight funnel. When there is only tpdm trace hw in the HW block, tpdm will connect to tpda directly.
+---------------+ +-------------+ | tpdm@6c08000 | |tpdm@684C000 | +-------|-------+ +------|------+ | | +-------|-------+ | | funnel@6c0b000| | +-------|-------+ | | | +-------|-------+ | |funnel@6c2d000 | | +-------|-------+ | | | | +---------------+ | +----- tpda@6004000 -----------+ +-------|-------+ | +-------|-------+ |funnel@6005000 | +---------------+
This patch series depends on patch series: [v7,00/15] coresight: Add new API to allocate trace source ID values https://patchwork.kernel.org/project/linux-arm-kernel/cover/20230116124928.5...
TPDM_TPDA commit tree: https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/tpdm-tpda-v1...
Changes in V17: 1. Rebase changes on V7 coresight: Add new API to allocate trace source ID values 2. Add documentation for TPDA and TPDM under Documentation/tracing/coresight/. (Suzuki K Poulose suzuki.poulose@arm.com)
Changes in V16: 1. Update device tree changes to match up with device tree bindings. 3. Update the copyright year to 2023.
Changes in V15: 1. coresight-tpda: Add more comments in trace id function. 2. qcom,coresight-tpdm.yaml: Add more comments in description. 3. Push "arm64: dts: qcom: sm8250: Add coresight components" out this series.
Changes in V14: rebase to "[v5,00/14] coresight: Add new API to allocate trace source ID values" and latest 6.x kernel
Changes in V13: 1. Fix the conflicts when apply patches to the latest base line.
Changes in V12: 1. Clear bits for atid before setting them and relese atid when tpda remove. -- Suzuki K Poulose suzuki.poulose@arm.com
Changes in V11: 1. Change dev_info to dev_dbg in TPDM/TPDA drivers. -- Suzuki K Poulose suzuki.poulose@arm.com 2. Merge sysfs API change of integration_test to integration_test driver change. -- Suzuki K Poulose suzuki.poulose@arm.com
Changes in V10: 1. Fix the error of TPDM yaml file. -- Rob Herring robh@kernel.org
Changes in V9: 1. Rename yaml file for TPDM/TPDA and fix the error for the yaml files. -- Rob Herring robh@kernel.org
Changes in V8: 1. Use spinlock to protect drvdata of TPDM/TPDA -- Suzuki K Poulose suzuki.poulose@arm.com 2. Use CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS as source type for TPDM -- Suzuki K Poulose suzuki.poulose@arm.com 3. Fix the warning for yaml file of TPDM/TPDA -- Rob Herring robh@kernel.org
Changes in V7: 1. Update the commit title and move the changes to right place which is sorted by address for dtsi changes. -- Konrad Dybcio konrad.dybcio@somainline.org
Changes in V6: 1. Update maintainers in tpdm/tpda yaml file. -- Mike Leach mike.leach@linaro.org 2. Set the .remove function pointer in the amba_driver structure of tpdm/tpda driver. Add tpda_remove function for tpda driver. -- Mike Leach mike.leach@linaro.org 3. Define datasets of tpdm as unsigned long. -- Mike Leach mike.leach@linaro.org 4. Move all coresight nodes to sm8250.dtsi. -- Mike Leach mike.leach@linaro.org;Konrad Dybcio konrad.dybcio@somainline.org 5. Remove CORESIGHT_TPDM_INTEGRATION_TEST config. -- Mike Leach mike.leach@linaro.org
Changes in V5: 1. Keep the ETM source paths per-CPU and use IDR for other sources' paths. (Suzuki K Poulose suzuki.poulose@arm.com)
Changes in V4: 1. Drop trace id for tpdm source as its trace atid is defined by the tpda. Allocate tpda's atid dynamically. (Mike Leach)
Changes in V3: 1. Use bitmap to assign the trace id. (Mathieu Poirier)
Changes in V2: 1. Use IDR to store the path of sources. (Mathieu Poirier) 2. Only add integration_test/enable/disable for TPDM. No other configs. (Mathieu Poirier) 3. Move coresight dtsi changes to sm8250.dtsi. (Suzuki K Poulose)
Mao Jinlong (9): coresight: core: Use IDR for non-cpu bound sources' paths. Coresight: Add coresight TPDM source driver dt-bindings: arm: Add CoreSight TPDM hardware coresight-tpdm: Add DSB dataset support coresight-tpdm: Add integration test support Coresight: Add TPDA link driver dt-bindings: arm: Adds CoreSight TPDA hardware definitions Documentation: trace: Add documentation for TPDM and TPDA arm64: dts: qcom: sm8250: Add tpdm mm/prng
.../testing/sysfs-bus-coresight-devices-tpdm | 13 + .../bindings/arm/qcom,coresight-tpda.yaml | 129 +++++++++ .../bindings/arm/qcom,coresight-tpdm.yaml | 93 +++++++ .../trace/coresight/coresight-tpda.rst | 52 ++++ .../trace/coresight/coresight-tpdm.rst | 43 +++ MAINTAINERS | 1 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 164 +++++++++++ drivers/hwtracing/coresight/Kconfig | 23 ++ drivers/hwtracing/coresight/Makefile | 2 + drivers/hwtracing/coresight/coresight-core.c | 42 ++- drivers/hwtracing/coresight/coresight-tpda.c | 211 ++++++++++++++ drivers/hwtracing/coresight/coresight-tpda.h | 35 +++ drivers/hwtracing/coresight/coresight-tpdm.c | 259 ++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 62 +++++ include/linux/coresight.h | 1 + 15 files changed, 1118 insertions(+), 12 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml create mode 100644 Documentation/trace/coresight/coresight-tpda.rst create mode 100644 Documentation/trace/coresight/coresight-tpdm.rst create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.c create mode 100644 drivers/hwtracing/coresight/coresight-tpdm.h