Hi James,
On Fri, 11 Mar 2022 at 14:58, James Clark james.clark@arm.com wrote:
On 02/02/2022 20:25, Mike Leach wrote:
Hi James, Suzuki
On Fri, 28 Jan 2022 at 11:19, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 13/01/2022 09:10, James Clark wrote:
When enabled, all taken branch addresses are output, even if the branch was because of a direct branch instruction. This enables reconstruction of the program flow without having access to the memory image of the code being executed.
Use bit 8 for the config option which would be the correct bit for programming ETMv3. Although branch broadcast can't be enabled on ETMv3 because it's not in the define ETM3X_SUPPORTED_OPTIONS, using the correct bit might help prevent future collisions or allow it to be enabled if needed.
Signed-off-by: James Clark james.clark@arm.com
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++ drivers/hwtracing/coresight/coresight-etm4x-core.c | 10 ++++++++++ include/linux/coresight-pmu.h | 2 ++ 3 files changed, 14 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index c039b6ae206f..43bbd5dc3d3b 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -52,6 +52,7 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
- The PMU formats were orignally for ETMv3.5/PTM's ETMCR 'config';
- now take them as general formats and apply on all ETMs.
*/ +PMU_FORMAT_ATTR(branch_broadcast, "config:"__stringify(ETM_OPT_BRANCH_BROADCAST)); PMU_FORMAT_ATTR(cycacc, "config:" __stringify(ETM_OPT_CYCACC)); /* contextid1 enables tracing CONTEXTIDR_EL1 for ETMv4 */ PMU_FORMAT_ATTR(contextid1, "config:" __stringify(ETM_OPT_CTXTID)); @@ -97,6 +98,7 @@ static struct attribute *etm_config_formats_attr[] = { &format_attr_sinkid.attr, &format_attr_preset.attr, &format_attr_configid.attr,
&format_attr_branch_broadcast.attr,Does it make sense to hide the option if the bb is not supported ? I guess it will be tricky as we don't track the common feature set. So, that said...
NULL,};
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index bf18128cf5de..04669ecc0efa 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -692,6 +692,16 @@ static int etm4_parse_event_config(struct coresight_device *csdev, ret = cscfg_csdev_enable_active_config(csdev, cfg_hash, preset); }
/* branch broadcast - enable if selected and supported */if (attr->config & BIT(ETM_OPT_BRANCH_BROADCAST)) {if (!drvdata->trcbb) {ret = -EINVAL;Should we fail here ? We could simply ignore this and generate the trace normally. This would work on a big.LITTLE system with one set missing the branch broadcast, while the others support.
Mike,
Does this affect the trace decoding ? As such the OpenCSD should be able to decode the packets as they appear in the stream. Correct ?
Depends on what you mean by affect the trace decoding! From the simplest perspective - no - there is no issue as the packets will be decode as seen. THE decoder does not know that BB exists - nor if it is enabled.
However, the reason that a user may engage BB is that the code is in some way self modifying - so that following the code static image and calculating addresses will result in a different path taken.
e.g. imagine an opcode:-
B <address0>
Without BB, this will trace as a single E atom, the decoder will calculate address0 from the opcode in the static image and continue from there as the next trace address.
Now look at the case where this is changed on the fly to
B <address1>
With BB, This will trace to E TGT_ADDR<address1>
The decoder will initially extract address0 from the static image, but the immediately following target address packet will alter the next address traced to address1 This is why we have BB.
So if the user has a reason to engage BB - we should really fail if it is not present - as the outcome of the trace can be affected.
Hi Mike,
Now I'm starting to wonder if it's best to have some kind of non-binary image mode for BB where you'd just get a list of addresses output by perf script and it doesn't attempt to do any lookups.
Not at all sure what you mean by this
Mike
Although I think that would require a change in OpenCSD if it's not aware of the mode?
I also need to go back to my JVM profiling test and see what's going on again. But I think I understand your points a bit more now.
Thanks James
Suzuki
goto out;} else {config->cfg |= BIT(ETM4_CFG_BIT_BB);}}- out: return ret; }
diff --git a/include/linux/coresight-pmu.h b/include/linux/coresight-pmu.h index 4ac5c081af93..6c2fd6cc5a98 100644 --- a/include/linux/coresight-pmu.h +++ b/include/linux/coresight-pmu.h @@ -18,6 +18,7 @@
- ETMv3.5/PTM doesn't define ETMCR config bits with prefix "ETM3_" and
- directly use below macros as config bits.
*/ +#define ETM_OPT_BRANCH_BROADCAST 8 #define ETM_OPT_CYCACC 12 #define ETM_OPT_CTXTID 14 #define ETM_OPT_CTXTID2 15 @@ -25,6 +26,7 @@ #define ETM_OPT_RETSTK 29
/* ETMv4 CONFIGR programming bits for the ETM OPTs */ +#define ETM4_CFG_BIT_BB 3 #define ETM4_CFG_BIT_CYCACC 4 #define ETM4_CFG_BIT_CTXTID 6 #define ETM4_CFG_BIT_VMID 7