From the comment in the code, it claims the requirement for byte-address
alignment for RRP register: 'for 32-bit, 64-bit and 128-bit wide trace memory, the four LSBs must be 0s. For 256-bit wide trace memory, the five LSBs must be 0s'. This isn't consistent with the program, the program sets five LSBs as zeros for 32/64/128-bit wide trace memory and set six LSBs zeros for 256-bit wide trace memory.
After checking with the CoreSight Trace Memory Controller technical reference manual (ARM DDI 0461B, section 3.3.4 RAM Read Pointer Register), it proves the comment is right and the program does wrong setting.
This patch fixes byte-address alignment for RRP by following correct definition in the technical reference manual.
Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Mike Leach mike.leach@linaro.org Signed-off-by: Leo Yan leo.yan@linaro.org --- drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 0549249..e310613 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -438,10 +438,10 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev, case TMC_MEM_INTF_WIDTH_32BITS: case TMC_MEM_INTF_WIDTH_64BITS: case TMC_MEM_INTF_WIDTH_128BITS: - mask = GENMASK(31, 5); + mask = GENMASK(31, 4); break; case TMC_MEM_INTF_WIDTH_256BITS: - mask = GENMASK(31, 6); + mask = GENMASK(31, 5); break; }