On 14 September 2017 at 15:24, marekzmyslowski marekzmyslowski@poczta.onet.pl wrote:

Hello Mike,

Thank you. I will try to use it. One more question if I may. Where do you get userdata/rootfs - for example something like this

https://github.com/96boards/documentation/blob/master/ConsumerEdition/Dragon... ?

I'm not sure about what you need here... The user space I run can be found here [1] but it seems you've already found that page...

Mathieu

[1]. https://96boards.org/documentation/ConsumerEdition/DragonBoard-410c/Download...

Regards Marek

W dniu 2017-09-14 18:13:26 użytkownik Mike Leach mike.leach@linaro.org napisał:

...

Hi,

I've attached the .config I am using to debug coresight drivers on DB410c - used to build the opencsd-perf-4.13 kernel tree in the OpenCSD github project. The .dtb to use is apq8016-sbc.dtb

Regards

Mike

On 14 September 2017 at 09:31, marekzmyslowski marekzmyslowski@poczta.onet.pl wrote:

...

Hi,

I'm trying to build kernel for the DragonBoard 410c to use the CoreSight. What config should I used (default for the qcom) and what dtb file is related to that board?

Regards Marek _______________________________________________ CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight

-- Mike Leach Principal Engineer, ARM Ltd. Blackburn Design Centre. UK

---

CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight