As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
1. when :doc: tag is used to point to a kernel-doc DOC: markup; 2. when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
On this series:
Patch 1 manually adjust the references inside driver-api/pm/devices.rst, as there it uses :file:`foo` to refer to some Documentation/ files;
Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst into a list, carefully avoiding the
Patch 3 converts the cross-references at the media documentation, also avoiding the automarkup.py bug;
Patches 4-34 convert the other occurrences via a replace script. They were manually edited, in order to honour 80-columns where possible.
I did a diff between the Sphinx 2.4.4 output before and after this patch series in order to double-check that all converted Documentation/ references will produce <a href=<foo>.rst>foo title</a> tags.
Mauro Carvalho Chehab (34): docs: devices.rst: better reference documentation docs docs: dev-tools: kunit: don't use a table for docs name media: docs: */media/index.rst: don't use ReST doc:`foo` media: userspace-api: avoid using ReST :doc:`foo` markup media: driver-api: drivers: avoid using ReST :doc:`foo` markup media: admin-guide: avoid using ReST :doc:`foo` markup docs: admin-guide: pm: avoid using ReSt :doc:`foo` markup docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup docs: block: biodoc.rst: avoid using ReSt :doc:`foo` markup docs: bpf: bpf_lsm.rst: avoid using ReSt :doc:`foo` markup docs: core-api: avoid using ReSt :doc:`foo` markup docs: dev-tools: testing-overview.rst: avoid using ReSt :doc:`foo` markup docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup docs: devicetree: bindings: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: doc-guide: avoid using ReSt :doc:`foo` markup docs: driver-api: avoid using ReSt :doc:`foo` markup docs: driver-api: gpio: using-gpio.rst: avoid using ReSt :doc:`foo` markup docs: driver-api: surface_aggregator: avoid using ReSt :doc:`foo` markup docs: driver-api: usb: avoid using ReSt :doc:`foo` markup docs: firmware-guide: acpi: avoid using ReSt :doc:`foo` markup docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup docs: i2c: avoid using ReSt :doc:`foo` markup docs: kernel-hacking: hacking.rst: avoid using ReSt :doc:`foo` markup docs: networking: devlink: avoid using ReSt :doc:`foo` markup docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReSt :doc:`foo` markup docs: PCI: pci.rst: avoid using ReSt :doc:`foo` markup docs: process: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: security: landlock.rst: avoid using ReSt :doc:`foo` markup docs: trace: coresight: coresight.rst: avoid using ReSt :doc:`foo` markup docs: trace: ftrace.rst: avoid using ReSt :doc:`foo` markup docs: userspace-api: landlock.rst: avoid using ReSt :doc:`foo` markup docs: virt: kvm: s390-pv-boot.rst: avoid using ReSt :doc:`foo` markup docs: x86: avoid using ReSt :doc:`foo` markup
.../PCI/endpoint/pci-endpoint-cfs.rst | 2 +- Documentation/PCI/pci.rst | 6 +-- .../special-register-buffer-data-sampling.rst | 3 +- Documentation/admin-guide/media/bt8xx.rst | 15 ++++---- Documentation/admin-guide/media/bttv.rst | 21 ++++++----- Documentation/admin-guide/media/index.rst | 12 +++--- Documentation/admin-guide/media/saa7134.rst | 3 +- Documentation/admin-guide/pm/intel_idle.rst | 16 +++++--- Documentation/admin-guide/pm/intel_pstate.rst | 9 +++-- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 ++++++++++--------- Documentation/block/biodoc.rst | 2 +- Documentation/bpf/bpf_lsm.rst | 13 ++++--- .../core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 ++- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 +- Documentation/dev-tools/kunit/api/index.rst | 8 ++-- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++---- Documentation/dev-tools/kunit/start.rst | 6 +-- Documentation/dev-tools/kunit/tips.rst | 5 ++- Documentation/dev-tools/kunit/usage.rst | 8 ++-- Documentation/dev-tools/testing-overview.rst | 16 ++++---- .../bindings/submitting-patches.rst | 11 +++--- Documentation/doc-guide/contributing.rst | 8 ++-- Documentation/driver-api/gpio/using-gpio.rst | 4 +- Documentation/driver-api/ioctl.rst | 2 +- .../driver-api/media/drivers/bttv-devel.rst | 2 +- Documentation/driver-api/media/index.rst | 10 +++-- Documentation/driver-api/pm/devices.rst | 8 ++-- .../surface_aggregator/clients/index.rst | 3 +- .../surface_aggregator/internal.rst | 15 ++++---- .../surface_aggregator/overview.rst | 6 ++- Documentation/driver-api/usb/dma.rst | 6 +-- .../acpi/dsd/data-node-references.rst | 3 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- .../firmware-guide/acpi/enumeration.rst | 7 ++-- Documentation/hwmon/adm1177.rst | 3 +- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 +- Documentation/i2c/smbus-protocol.rst | 4 +- Documentation/kernel-hacking/hacking.rst | 4 +- .../networking/devlink/devlink-region.rst | 2 +- .../networking/devlink/devlink-trap.rst | 4 +- Documentation/process/submitting-patches.rst | 32 ++++++++-------- Documentation/security/landlock.rst | 3 +- Documentation/trace/coresight/coresight.rst | 8 ++-- Documentation/trace/ftrace.rst | 2 +- Documentation/userspace-api/landlock.rst | 11 +++--- .../userspace-api/media/glossary.rst | 2 +- Documentation/userspace-api/media/index.rst | 12 +++--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- Documentation/x86/boot.rst | 4 +- Documentation/x86/mtrr.rst | 2 +- 55 files changed, 217 insertions(+), 183 deletions(-)
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org --- Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 169749efd8d1..1ec8dc35b1d8 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -315,7 +315,8 @@ intermediate links as required.
Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections::
linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections @@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~#
-Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_.
The CTI & CTM Modules --------------------- @@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix).
A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_.
.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
On Sat, Jun 05, 2021 at 03:18:29PM +0200, Mauro Carvalho Chehab wrote:
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org
Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 169749efd8d1..1ec8dc35b1d8 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -315,7 +315,8 @@ intermediate links as required. Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections:: linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections @@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~# -Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_. The CTI & CTM Modules
@@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix). A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_. .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -- 2.31.1
Em Sat, 5 Jun 2021 15:17:59 +0200 Mauro Carvalho Chehab mchehab+huawei@kernel.org escreveu:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
Forgot to mention:
1. this series is against docs-next branch; 2. maintainers bcc, as otherwise the e-mail would be rejected, due to the number of c/c. I opted to keep c/c the mailing lists.
Regards, Mauro
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
On this series:
Patch 1 manually adjust the references inside driver-api/pm/devices.rst, as there it uses :file:`foo` to refer to some Documentation/ files;
Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst into a list, carefully avoiding the
Patch 3 converts the cross-references at the media documentation, also avoiding the automarkup.py bug;
Patches 4-34 convert the other occurrences via a replace script. They were manually edited, in order to honour 80-columns where possible.
I did a diff between the Sphinx 2.4.4 output before and after this patch series in order to double-check that all converted Documentation/ references will produce <a href=<foo>.rst>foo title</a> tags.
Mauro Carvalho Chehab (34): docs: devices.rst: better reference documentation docs docs: dev-tools: kunit: don't use a table for docs name media: docs: */media/index.rst: don't use ReST doc:`foo` media: userspace-api: avoid using ReST :doc:`foo` markup media: driver-api: drivers: avoid using ReST :doc:`foo` markup media: admin-guide: avoid using ReST :doc:`foo` markup docs: admin-guide: pm: avoid using ReSt :doc:`foo` markup docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup docs: block: biodoc.rst: avoid using ReSt :doc:`foo` markup docs: bpf: bpf_lsm.rst: avoid using ReSt :doc:`foo` markup docs: core-api: avoid using ReSt :doc:`foo` markup docs: dev-tools: testing-overview.rst: avoid using ReSt :doc:`foo` markup docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup docs: devicetree: bindings: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: doc-guide: avoid using ReSt :doc:`foo` markup docs: driver-api: avoid using ReSt :doc:`foo` markup docs: driver-api: gpio: using-gpio.rst: avoid using ReSt :doc:`foo` markup docs: driver-api: surface_aggregator: avoid using ReSt :doc:`foo` markup docs: driver-api: usb: avoid using ReSt :doc:`foo` markup docs: firmware-guide: acpi: avoid using ReSt :doc:`foo` markup docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup docs: i2c: avoid using ReSt :doc:`foo` markup docs: kernel-hacking: hacking.rst: avoid using ReSt :doc:`foo` markup docs: networking: devlink: avoid using ReSt :doc:`foo` markup docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReSt :doc:`foo` markup docs: PCI: pci.rst: avoid using ReSt :doc:`foo` markup docs: process: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: security: landlock.rst: avoid using ReSt :doc:`foo` markup docs: trace: coresight: coresight.rst: avoid using ReSt :doc:`foo` markup docs: trace: ftrace.rst: avoid using ReSt :doc:`foo` markup docs: userspace-api: landlock.rst: avoid using ReSt :doc:`foo` markup docs: virt: kvm: s390-pv-boot.rst: avoid using ReSt :doc:`foo` markup docs: x86: avoid using ReSt :doc:`foo` markup
.../PCI/endpoint/pci-endpoint-cfs.rst | 2 +- Documentation/PCI/pci.rst | 6 +-- .../special-register-buffer-data-sampling.rst | 3 +- Documentation/admin-guide/media/bt8xx.rst | 15 ++++---- Documentation/admin-guide/media/bttv.rst | 21 ++++++----- Documentation/admin-guide/media/index.rst | 12 +++--- Documentation/admin-guide/media/saa7134.rst | 3 +- Documentation/admin-guide/pm/intel_idle.rst | 16 +++++--- Documentation/admin-guide/pm/intel_pstate.rst | 9 +++-- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 ++++++++++--------- Documentation/block/biodoc.rst | 2 +- Documentation/bpf/bpf_lsm.rst | 13 ++++--- .../core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 ++- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 +- Documentation/dev-tools/kunit/api/index.rst | 8 ++-- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++---- Documentation/dev-tools/kunit/start.rst | 6 +-- Documentation/dev-tools/kunit/tips.rst | 5 ++- Documentation/dev-tools/kunit/usage.rst | 8 ++-- Documentation/dev-tools/testing-overview.rst | 16 ++++---- .../bindings/submitting-patches.rst | 11 +++--- Documentation/doc-guide/contributing.rst | 8 ++-- Documentation/driver-api/gpio/using-gpio.rst | 4 +- Documentation/driver-api/ioctl.rst | 2 +- .../driver-api/media/drivers/bttv-devel.rst | 2 +- Documentation/driver-api/media/index.rst | 10 +++-- Documentation/driver-api/pm/devices.rst | 8 ++-- .../surface_aggregator/clients/index.rst | 3 +- .../surface_aggregator/internal.rst | 15 ++++---- .../surface_aggregator/overview.rst | 6 ++- Documentation/driver-api/usb/dma.rst | 6 +-- .../acpi/dsd/data-node-references.rst | 3 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- .../firmware-guide/acpi/enumeration.rst | 7 ++-- Documentation/hwmon/adm1177.rst | 3 +- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 +- Documentation/i2c/smbus-protocol.rst | 4 +- Documentation/kernel-hacking/hacking.rst | 4 +- .../networking/devlink/devlink-region.rst | 2 +- .../networking/devlink/devlink-trap.rst | 4 +- Documentation/process/submitting-patches.rst | 32 ++++++++-------- Documentation/security/landlock.rst | 3 +- Documentation/trace/coresight/coresight.rst | 8 ++-- Documentation/trace/ftrace.rst | 2 +- Documentation/userspace-api/landlock.rst | 11 +++--- .../userspace-api/media/glossary.rst | 2 +- Documentation/userspace-api/media/index.rst | 12 +++--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- Documentation/x86/boot.rst | 4 +- Documentation/x86/mtrr.rst | 2 +- 55 files changed, 217 insertions(+), 183 deletions(-)
Thanks, Mauro
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
I'm not sure this is something we need to fix. Does it make sense to use definition lists for links like that? If it does, I guess one option would be to whitelist definition lists so they aren't ignored by automarkup, but I feel this could get ugly really quickly.
FWIW note that it's also possible to use relative paths to docs with automarkup.
Thanks, Nícolas
[1] https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#definitio...
On this series:
Patch 1 manually adjust the references inside driver-api/pm/devices.rst, as there it uses :file:`foo` to refer to some Documentation/ files;
Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst into a list, carefully avoiding the
Patch 3 converts the cross-references at the media documentation, also avoiding the automarkup.py bug;
Patches 4-34 convert the other occurrences via a replace script. They were manually edited, in order to honour 80-columns where possible.
I did a diff between the Sphinx 2.4.4 output before and after this patch series in order to double-check that all converted Documentation/ references will produce <a href=<foo>.rst>foo title</a> tags.
Mauro Carvalho Chehab (34): docs: devices.rst: better reference documentation docs docs: dev-tools: kunit: don't use a table for docs name media: docs: */media/index.rst: don't use ReST doc:`foo` media: userspace-api: avoid using ReST :doc:`foo` markup media: driver-api: drivers: avoid using ReST :doc:`foo` markup media: admin-guide: avoid using ReST :doc:`foo` markup docs: admin-guide: pm: avoid using ReSt :doc:`foo` markup docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup docs: block: biodoc.rst: avoid using ReSt :doc:`foo` markup docs: bpf: bpf_lsm.rst: avoid using ReSt :doc:`foo` markup docs: core-api: avoid using ReSt :doc:`foo` markup docs: dev-tools: testing-overview.rst: avoid using ReSt :doc:`foo` markup docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup docs: devicetree: bindings: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: doc-guide: avoid using ReSt :doc:`foo` markup docs: driver-api: avoid using ReSt :doc:`foo` markup docs: driver-api: gpio: using-gpio.rst: avoid using ReSt :doc:`foo` markup docs: driver-api: surface_aggregator: avoid using ReSt :doc:`foo` markup docs: driver-api: usb: avoid using ReSt :doc:`foo` markup docs: firmware-guide: acpi: avoid using ReSt :doc:`foo` markup docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup docs: i2c: avoid using ReSt :doc:`foo` markup docs: kernel-hacking: hacking.rst: avoid using ReSt :doc:`foo` markup docs: networking: devlink: avoid using ReSt :doc:`foo` markup docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReSt :doc:`foo` markup docs: PCI: pci.rst: avoid using ReSt :doc:`foo` markup docs: process: submitting-patches.rst: avoid using ReSt :doc:`foo` markup docs: security: landlock.rst: avoid using ReSt :doc:`foo` markup docs: trace: coresight: coresight.rst: avoid using ReSt :doc:`foo` markup docs: trace: ftrace.rst: avoid using ReSt :doc:`foo` markup docs: userspace-api: landlock.rst: avoid using ReSt :doc:`foo` markup docs: virt: kvm: s390-pv-boot.rst: avoid using ReSt :doc:`foo` markup docs: x86: avoid using ReSt :doc:`foo` markup
.../PCI/endpoint/pci-endpoint-cfs.rst | 2 +- Documentation/PCI/pci.rst | 6 +-- .../special-register-buffer-data-sampling.rst | 3 +- Documentation/admin-guide/media/bt8xx.rst | 15 ++++---- Documentation/admin-guide/media/bttv.rst | 21 ++++++----- Documentation/admin-guide/media/index.rst | 12 +++--- Documentation/admin-guide/media/saa7134.rst | 3 +- Documentation/admin-guide/pm/intel_idle.rst | 16 +++++--- Documentation/admin-guide/pm/intel_pstate.rst | 9 +++-- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 ++++++++++--------- Documentation/block/biodoc.rst | 2 +- Documentation/bpf/bpf_lsm.rst | 13 ++++--- .../core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 ++- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 +- Documentation/dev-tools/kunit/api/index.rst | 8 ++-- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++---- Documentation/dev-tools/kunit/start.rst | 6 +-- Documentation/dev-tools/kunit/tips.rst | 5 ++- Documentation/dev-tools/kunit/usage.rst | 8 ++-- Documentation/dev-tools/testing-overview.rst | 16 ++++---- .../bindings/submitting-patches.rst | 11 +++--- Documentation/doc-guide/contributing.rst | 8 ++-- Documentation/driver-api/gpio/using-gpio.rst | 4 +- Documentation/driver-api/ioctl.rst | 2 +- .../driver-api/media/drivers/bttv-devel.rst | 2 +- Documentation/driver-api/media/index.rst | 10 +++-- Documentation/driver-api/pm/devices.rst | 8 ++-- .../surface_aggregator/clients/index.rst | 3 +- .../surface_aggregator/internal.rst | 15 ++++---- .../surface_aggregator/overview.rst | 6 ++- Documentation/driver-api/usb/dma.rst | 6 +-- .../acpi/dsd/data-node-references.rst | 3 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- .../firmware-guide/acpi/enumeration.rst | 7 ++-- Documentation/hwmon/adm1177.rst | 3 +- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 +- Documentation/i2c/smbus-protocol.rst | 4 +- Documentation/kernel-hacking/hacking.rst | 4 +- .../networking/devlink/devlink-region.rst | 2 +- .../networking/devlink/devlink-trap.rst | 4 +- Documentation/process/submitting-patches.rst | 32 ++++++++-------- Documentation/security/landlock.rst | 3 +- Documentation/trace/coresight/coresight.rst | 8 ++-- Documentation/trace/ftrace.rst | 2 +- Documentation/userspace-api/landlock.rst | 11 +++--- .../userspace-api/media/glossary.rst | 2 +- Documentation/userspace-api/media/index.rst | 12 +++--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- Documentation/x86/boot.rst | 4 +- Documentation/x86/mtrr.rst | 2 +- 55 files changed, 217 insertions(+), 183 deletions(-)
-- 2.31.1
Em Sat, 5 Jun 2021 12:11:09 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
A literal has a different output. I think that this is not the case, but I didn't check the python code from docutils/Sphinx.
I'm not sure this is something we need to fix. Does it make sense to use definition lists for links like that? If it does, I guess one option would be to whitelist definition lists so they aren't ignored by automarkup, but I feel this could get ugly really quickly.
Yes, we should avoid handling literal blocks, as this can be a nightmare.
FWIW note that it's also possible to use relative paths to docs with automarkup.
Not sure if you meant to say using something like ../driver-api/foo.rst. If so, relative paths are a problem, as it will pass unnoticed by this script:
./scripts/documentation-file-ref-check
which is meant to warn when a file is moved to be elsewhere. Ok, it could be taught to use "../" to identify paths, but I suspect that this could lead to false positives, like here:
Documentation/usb/gadget-testing.rst: # ln -s ../../uncompressed/u Documentation/usb/gadget-testing.rst: # cd ../../class/fs Documentation/usb/gadget-testing.rst: # ln -s ../../header/h
If you meant, instead, :doc:`../foo`, this series address those too.
Regards, Mauro
On Sat, Jun 05, 2021 at 09:08:36PM +0200, Mauro Carvalho Chehab wrote:
Em Sat, 5 Jun 2021 12:11:09 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
A literal has a different output. I think that this is not the case, but I didn't check the python code from docutils/Sphinx.
Okay, I went in deeper to understand the issue and indeed it wasn't what I thought. The reason definitions are ignored by automarkup.py is because the main loop iterates only over nodes that are of type paragraph:
for para in doctree.traverse(nodes.paragraph): for node in para.traverse(nodes.Text): if not isinstance(node.parent, nodes.literal): node.parent.replace(node, markup_refs(name, app, node))
And inspecting the HTML output from your example, the definition name is inside a <dt> tag, and it doesn't have a <p> inside. So in summary, automarkup.py will only work on elements which are inside a <p> in the output.
Only applying the automarkup inside paragraphs seems like a good decision (which covers text in lists and tables as well), so unless there are other types of elements without paragraphs where automarkup should work, I think we should just avoid using definition lists pointing to documents like that.
I'm not sure this is something we need to fix. Does it make sense to use definition lists for links like that? If it does, I guess one option would be to whitelist definition lists so they aren't ignored by automarkup, but I feel this could get ugly really quickly.
Yes, we should avoid handling literal blocks, as this can be a nightmare.
FWIW note that it's also possible to use relative paths to docs with automarkup.
Not sure if you meant to say using something like ../driver-api/foo.rst. If so, relative paths are a problem, as it will pass unnoticed by this script:
./scripts/documentation-file-ref-check
which is meant to warn when a file is moved to be elsewhere. Ok, it could be taught to use "../" to identify paths, but I suspect that this could lead to false positives, like here:
Documentation/usb/gadget-testing.rst: # ln -s ../../uncompressed/u Documentation/usb/gadget-testing.rst: # cd ../../class/fs Documentation/usb/gadget-testing.rst: # ln -s ../../header/h
Yes, that's what I meant.
Ok, that makes sense. Although after automarkup.py starts printing warnings on missing references to files (which is a patch I still need to resend), it would work out-of-the-box with relative paths. automarkup wouldn't face that false positives issue since it ignores literal blocks, which isn't as easy for a standalone script. But that's still in the future, we can discuss what to do then after it is implemented, so full paths seem better for now.
Thanks, Nícolas
If you meant, instead, :doc:`../foo`, this series address those too.
Regards, Mauro
Em Sun, 6 Jun 2021 19:52:25 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
On Sat, Jun 05, 2021 at 09:08:36PM +0200, Mauro Carvalho Chehab wrote:
Em Sat, 5 Jun 2021 12:11:09 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
A literal has a different output. I think that this is not the case, but I didn't check the python code from docutils/Sphinx.
Okay, I went in deeper to understand the issue and indeed it wasn't what I thought. The reason definitions are ignored by automarkup.py is because the main loop iterates only over nodes that are of type paragraph:
for para in doctree.traverse(nodes.paragraph): for node in para.traverse(nodes.Text): if not isinstance(node.parent, nodes.literal): node.parent.replace(node, markup_refs(name, app, node))And inspecting the HTML output from your example, the definition name is inside a <dt> tag, and it doesn't have a <p> inside. So in summary, automarkup.py will only work on elements which are inside a <p> in the output.
Yeah, that's what I was suspecting, based on the comments.
Maybe something similar to the above could be done also for some non-paragraph data. By looking at:
https://docutils.sourceforge.io/docs/ref/doctree.html
It says that the body elements are:
admonition, attention, block_quote, bullet_list, caution, citation, comment, compound, container, danger, definition_list, doctest_block, enumerated_list, error, field_list, figure, footnote, hint, image, important, line_block, literal_block, note, option_list, paragraph, pending, raw, rubric, substitution_definition, system_message, table, target, tip, warning
So, perhaps a similar loop for definition_list would do the trick, but maybe automarkup should also look at other types, like enum lists, notes (and their variants, like error/warning) and footnotes.
No idea how this would affect the docs build time, though.
Only applying the automarkup inside paragraphs seems like a good decision (which covers text in lists and tables as well), so unless there are other types of elements without paragraphs where automarkup should work, I think we should just avoid using definition lists pointing to documents like that.
Checking the code or doing some tests are needed for us to be sure about what of the above types docutils don't consider a paragraph.
Thanks, Mauro
Hi Mauro,
On Mon, Jun 07, 2021 at 09:34:22AM +0200, Mauro Carvalho Chehab wrote:
Em Sun, 6 Jun 2021 19:52:25 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
On Sat, Jun 05, 2021 at 09:08:36PM +0200, Mauro Carvalho Chehab wrote:
Em Sat, 5 Jun 2021 12:11:09 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
A literal has a different output. I think that this is not the case, but I didn't check the python code from docutils/Sphinx.
Okay, I went in deeper to understand the issue and indeed it wasn't what I thought. The reason definitions are ignored by automarkup.py is because the main loop iterates only over nodes that are of type paragraph:
for para in doctree.traverse(nodes.paragraph): for node in para.traverse(nodes.Text): if not isinstance(node.parent, nodes.literal): node.parent.replace(node, markup_refs(name, app, node))And inspecting the HTML output from your example, the definition name is inside a <dt> tag, and it doesn't have a <p> inside. So in summary, automarkup.py will only work on elements which are inside a <p> in the output.
Yeah, that's what I was suspecting, based on the comments.
Maybe something similar to the above could be done also for some non-paragraph data. By looking at:
https://docutils.sourceforge.io/docs/ref/doctree.html
It says that the body elements are:
admonition, attention, block_quote, bullet_list, caution, citation, comment, compound, container, danger, definition_list, doctest_block, enumerated_list, error, field_list, figure, footnote, hint, image, important, line_block, literal_block, note, option_list, paragraph, pending, raw, rubric, substitution_definition, system_message, table, target, tip, warning
Ok, I went through each one by searching the term on [1] and inspecting the element to see if it contained a <p> or not. The vast majority did. These are the ones I didn't find there or didn't make sense:
comment container image pending raw substitution_definition system_message target
We can safely ignore them. And these are the ones that matter and don't have paragraphs:
1. literal_block 2. doctest_block 3. definition_list 4. field_list 5. option_list 6. line_block
1 and 2 are literals, so we don't care about them.
3 is the one you noticed the issue with. It's worth mentioning that the definition term doesn't have a paragraph, but its definition does (as can be checked by inspecting [2]).
4 is basically the same as 3, the rst syntax is different but the output is the same. That said, I believe we only use those to set options at the top of the file, like in translations, and I can't see automarkup being useful in there.
5 is similar to 3 and 4, but the term is formatted using <kbd>, so it's like a literal and therefore not relevant.
6 is useful just to preserve indentation, and I'm pretty sure we don't use it in the docs.
So in the end, I think the only contenders to be added to automarkup are definition lists, and even then I still think we should just substitute those definition lists with alternatives like you did in your patches. Personally I don't see much gain in using definitions instead of a simple paragraph. But if you really think it's an improvement in some way, it could probably be added to automarkup in the way you described.
Thanks, Nícolas
[1] https://sphinx-rtd-theme.readthedocs.io/en/stable/index.html [2] https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/lists_tables.html?hig...
So, perhaps a similar loop for definition_list would do the trick, but maybe automarkup should also look at other types, like enum lists, notes (and their variants, like error/warning) and footnotes.
No idea how this would affect the docs build time, though.
Only applying the automarkup inside paragraphs seems like a good decision (which covers text in lists and tables as well), so unless there are other types of elements without paragraphs where automarkup should work, I think we should just avoid using definition lists pointing to documents like that.
Checking the code or doing some tests are needed for us to be sure about what of the above types docutils don't consider a paragraph.
Thanks, Mauro
Em Mon, 7 Jun 2021 21:34:58 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Mon, Jun 07, 2021 at 09:34:22AM +0200, Mauro Carvalho Chehab wrote:
Em Sun, 6 Jun 2021 19:52:25 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
On Sat, Jun 05, 2021 at 09:08:36PM +0200, Mauro Carvalho Chehab wrote:
Em Sat, 5 Jun 2021 12:11:09 -0300 Nícolas F. R. A. Prado n@nfraprado.net escreveu:
Hi Mauro,
On Sat, Jun 05, 2021 at 03:17:59PM +0200, Mauro Carvalho Chehab wrote:
As discussed at: https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
- when :doc: tag is used to point to a kernel-doc DOC: markup;
- when it is used with a named tag, e. g. :doc:`some name <foo>`;
It should also be noticed that automarkup.py has currently an issue: if one use a markup like:
Documentation/dev-tools/kunit/api/test.rst - documents all of the standard testing API excluding mocking or mocking related features.
or, even:
Documentation/dev-tools/kunit/api/test.rst documents all of the standard testing API excluding mocking or mocking related features. The automarkup.py will simply ignore it. Not sure why. This patch series avoid the above patterns (which is present only on 4 files), but it would be nice to have a followup patch fixing the issue at automarkup.py.
What I think is happening here is that we're using rST's syntax for definition lists [1]. automarkup.py ignores literal nodes, and perhaps a definition is considered a literal by Sphinx. Adding a blank line after the Documentation/... or removing the additional indentation makes it work, like you did in your 2nd and 3rd patch, since then it's not a definition anymore, although then the visual output is different as well.
A literal has a different output. I think that this is not the case, but I didn't check the python code from docutils/Sphinx.
Okay, I went in deeper to understand the issue and indeed it wasn't what I thought. The reason definitions are ignored by automarkup.py is because the main loop iterates only over nodes that are of type paragraph:
for para in doctree.traverse(nodes.paragraph): for node in para.traverse(nodes.Text): if not isinstance(node.parent, nodes.literal): node.parent.replace(node, markup_refs(name, app, node))And inspecting the HTML output from your example, the definition name is inside a <dt> tag, and it doesn't have a <p> inside. So in summary, automarkup.py will only work on elements which are inside a <p> in the output.
Yeah, that's what I was suspecting, based on the comments.
Maybe something similar to the above could be done also for some non-paragraph data. By looking at:
https://docutils.sourceforge.io/docs/ref/doctree.html
It says that the body elements are:
admonition, attention, block_quote, bullet_list, caution, citation, comment, compound, container, danger, definition_list, doctest_block, enumerated_list, error, field_list, figure, footnote, hint, image, important, line_block, literal_block, note, option_list, paragraph, pending, raw, rubric, substitution_definition, system_message, table, target, tip, warning
Ok, I went through each one by searching the term on [1] and inspecting the element to see if it contained a <p> or not. The vast majority did. These are the ones I didn't find there or didn't make sense:
comment container image pending raw substitution_definition system_message target
We can safely ignore them. And these are the ones that matter and don't have paragraphs:
- literal_block
- doctest_block
- definition_list
- field_list
- option_list
- line_block
1 and 2 are literals, so we don't care about them.
3 is the one you noticed the issue with. It's worth mentioning that the definition term doesn't have a paragraph, but its definition does (as can be checked by inspecting [2]).
4 is basically the same as 3, the rst syntax is different but the output is the same. That said, I believe we only use those to set options at the top of the file, like in translations, and I can't see automarkup being useful in there.
5 is similar to 3 and 4, but the term is formatted using <kbd>, so it's like a literal and therefore not relevant.
6 is useful just to preserve indentation, and I'm pretty sure we don't use it in the docs.
So in the end, I think the only contenders to be added to automarkup are definition lists, and even then I still think we should just substitute those definition lists with alternatives like you did in your patches. Personally I don't see much gain in using definitions instead of a simple paragraph. But if you really think it's an improvement in some way, it could probably be added to automarkup in the way you described.
Thank you for checking this!
Kernel docs use a lot definition lists. At the initial versions, it was equivalent to:
**Something to be written with emphasis**
Some description
Sphinx later changed the look-and-feel for the term, on html output, but the thing is that:
Something to be written with emphasis Some description
looks a lot better when read as a text file.
Also, on some cases, the first notation doesn't work. The definition-list was the only way I know that would allow to apply an emphasis to a literal block.
We can avoid using Documentation/foo on description lists: the current 4 cases where doc:`foo` are already addressed in this series, and the output is acceptable.
Yet, I have a couple of concerns:
1. It might have some unknown places where a description list is used for Documentation/foo; 2. It is not trivial to identify if someone add Documentation/foo in the future; 3. I suspect that there are several places where functions and structs appear at the definition lists.
(1) can probably be checked with a multi-line grep. So, not a big problem;
(2) is something that would require someone to verify from time to time;
but (3) are harder to check and seems to be a valid use-case.
Due to (3), I think we should let automarkup to parse non-literal terms on description lists. At very least it should emit a warning when it won't be doing auto-conversions for known patterns at definition lists (if doing that would generate false-positives).
Thanks, Mauro
-
Mathieu Poirier -
Mauro Carvalho Chehab -
Nícolas F. R. A. Prado