Hi Yicong.
On 2022/11/10 20:08, Yicong Yang wrote:
On 2022/11/9 21:50, Junhao He wrote:
From: Qi Liu liuqi115@huawei.com
This patch bring in documentation for UltraSoc SMB drivers. It simply describes the device, sysfs interface and the firmware bindings.
Signed-off-by: Qi Liu liuqi115@huawei.com Signed-off-by: Junhao He hejunhao3@huawei.com
.../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++ .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb new file mode 100644 index 000000000000..deaefd508105 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb @@ -0,0 +1,31 @@ +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink +Date: November 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (RW) Add/remove a SMB device from a trace path. There can be
multiple sources for a single SMB device.+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size +Date: November 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status +Date: November 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB status register.
BIT(0) is zero means buffer is empty.+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos +Date: November 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos +Date: November 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register. diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst new file mode 100644 index 000000000000..6d28ef0f6c88 --- /dev/null +++ b/Documentation/trace/coresight/ultrasoc-smb.rst @@ -0,0 +1,80 @@ +.. SPDX-License-Identifier: GPL-2.0
+====================================== +UltraSoc - HW Assisted Tracing on SoC +======================================
- :Author: Qi Liu liuqi115@huawei.com
- :Date: March 2022
+Introduction +------------
+UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a +way to buffer and store CPU trace messages in a region of shared system +memory. SMB is plugged as a coresight sink device and the corresponding +trace generators (ETM) are plugged in as source devices.
+Sysfs files and directories +---------------------------
+The SMB devices appear on the existing coresight bus alongside the other +coresight devices::
- $# ls /sys/bus/coresight/devices/
- ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
+The ``ultra_smb<N>`` named SMB associated with SCCL.::
- $# ls /sys/bus/coresight/devices/ultra_smb0
- enable_sink mgmt
- $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
- buf_size buf_status read_pos write_pos
+*Key file items are:-*
- ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
- ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
- ``buf_status``: Shows the value held by UltraSoc SMB status register.
BIT(0) is zero means buffer is empty.
- ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
+Firmware Bindings +---------------------------
+SMB device is only supported with ACPI, and ACPI binding of SMB device +describes SMB device indentifier, resource information and graph structure.
+SMB is identified by ACPI HID "HISI03A1", resource of device is declared using +the _CRS method. Each SMB must present two base address, the first one is the +configuration base address of SMB device, the second one is the base address of +shared system memory.
+examples::
- Device(USMB) { \
Name(_HID, "HISI03A1") \Name(_CRS, ResourceTemplate() { \MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
btw, you need to cc linux-doc@vger.kernel.org.
Thanks.
"MEM_RESERVE" is a macro. will update the doc and add cc. Thanks for the comments!
}) \Name(_DSD, Package() { \ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \- /* Use CoreSight Graph ACPI bindings to describe connections topology */
Package() { \0, \1, \Package() { \1, \ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \8, \Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \} \} \}) \- }
.
Best regards, Junhao.
-
hejunhao