The system on chip (SoC) consists of main APSS(Applications processor subsytem) and additional processors like modem, lpass. There is coresight-etm driver for etm trace of APSS. Coresight remote etm driver is for enabling and disabling the etm trace of remote processors. It uses QMI interface to communicate with remote processors' software and uses coresight framework to configure the connection from remote etm source to TMC sinks.
Example to capture the remote etm trace:
Enable source: echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/remote_etm0/enable_source
Capture the trace: cat /dev/tmc_etf0 > /data/remote_etm.bin
Disable source: echo 0 > /sys/bus/coresight/devices/remote_etm0/enable_source
Change since V2: 1. Change qcom,inst-id to qcom,qmi-id 2. Fix the error in code for type of remote_etm_remove 3. Depend on QMI helper in Kconfig
Changes since V1: 1. Remove unused content 2. Use CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS as remote etm source type. 3. Use enabled instead of enable in driver data. 4. Validate instance id value where it's read from the DT.
Mao Jinlong (2): dt-bindings: arm: Add qcom,qmi-id for remote etm coresight: Add remote etm support
.../arm/qcom,coresight-remote-etm.yaml | 10 + drivers/hwtracing/coresight/Kconfig | 13 + drivers/hwtracing/coresight/Makefile | 1 + drivers/hwtracing/coresight/coresight-qmi.h | 89 +++++ .../coresight/coresight-remote-etm.c | 307 ++++++++++++++++++ 5 files changed, 420 insertions(+) create mode 100644 drivers/hwtracing/coresight/coresight-qmi.h create mode 100644 drivers/hwtracing/coresight/coresight-remote-etm.c
qcom,qmi-id is the instance id used by qmi API to communicate with remote processor.
Signed-off-by: Mao Jinlong quic_jinlmao@quicinc.com --- .../bindings/arm/qcom,coresight-remote-etm.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml index 4fd5752978cd..27e5f18bfedf 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml @@ -20,6 +20,13 @@ properties: compatible: const: qcom,coresight-remote-etm
+ qcom,qmi-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This id is used by qmi API to communicate with remote processor for + enabling and disabling remote etm. Each processor has its unique instance + id. + out-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false @@ -31,6 +38,7 @@ properties:
required: - compatible + - qcom,qmi-id - out-ports
additionalProperties: false @@ -40,6 +48,8 @@ examples: etm { compatible = "qcom,coresight-remote-etm";
+ qcom,qmi-id = <5>; + out-ports { port { modem_etm0_out_funnel_modem: endpoint {
The system on chip (SoC) consists of main APSS(Applications processor subsytem) and additional processors like modem, lpass. Coresight remote etm(Embedded Trace Macrocell) driver is for enabling and disabling the etm trace of remote processors. It uses QMI interface to communicate with remote processors' software and uses coresight framework to configure the connection from remote etm source to TMC sinks.
Signed-off-by: Mao Jinlong quic_jinlmao@quicinc.com --- drivers/hwtracing/coresight/Kconfig | 13 + drivers/hwtracing/coresight/Makefile | 1 + drivers/hwtracing/coresight/coresight-qmi.h | 89 +++++ .../coresight/coresight-remote-etm.c | 307 ++++++++++++++++++ 4 files changed, 410 insertions(+) create mode 100644 drivers/hwtracing/coresight/coresight-qmi.h create mode 100644 drivers/hwtracing/coresight/coresight-remote-etm.c
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index 06f0a7594169..871dd83649ea 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -247,4 +247,17 @@ config CORESIGHT_DUMMY
To compile this driver as a module, choose M here: the module will be called coresight-dummy. + +config CORESIGHT_REMOTE_ETM + tristate "Remote processor ETM trace support" + depends on QCOM_QMI_HELPERS + help + Enables support for ETM trace collection on remote processor using + CoreSight framework. Enabling this will allow turning on ETM + tracing on remote processor via sysfs by configuring the required + CoreSight components. + + To compile this driver as a module, choose M here: the module will be + called coresight-remote-etm. + endif diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 4ba478211b31..e0781d729eb3 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -51,3 +51,4 @@ coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \ coresight-cti-sysfs.o obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o obj-$(CONFIG_CORESIGHT_DUMMY) += coresight-dummy.o +obj-$(CONFIG_CORESIGHT_REMOTE_ETM) += coresight-remote-etm.o diff --git a/drivers/hwtracing/coresight/coresight-qmi.h b/drivers/hwtracing/coresight/coresight-qmi.h new file mode 100644 index 000000000000..76ce9b7fdf0a --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-qmi.h @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _CORESIGHT_QMI_H +#define _CORESIGHT_QMI_H + +#include <linux/soc/qcom/qmi.h> + +#define CORESIGHT_QMI_SVC_ID (0x33) +#define CORESIGHT_QMI_VERSION (1) + +#define CORESIGHT_QMI_GET_ETM_REQ_V01 (0x002B) +#define CORESIGHT_QMI_GET_ETM_RESP_V01 (0x002B) +#define CORESIGHT_QMI_SET_ETM_REQ_V01 (0x002C) +#define CORESIGHT_QMI_SET_ETM_RESP_V01 (0x002C) + +#define CORESIGHT_QMI_GET_ETM_REQ_MAX_LEN (0) +#define CORESIGHT_QMI_GET_ETM_RESP_MAX_LEN (14) +#define CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN (7) +#define CORESIGHT_QMI_SET_ETM_RESP_MAX_LEN (7) + +#define TIMEOUT_MS (10000) + +enum coresight_etm_state_enum_type_v01 { + /* To force a 32 bit signed enum. Do not change or use */ + CORESIGHT_ETM_STATE_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN, + CORESIGHT_ETM_STATE_DISABLED_V01 = 0, + CORESIGHT_ETM_STATE_ENABLED_V01 = 1, + CORESIGHT_ETM_STATE_ENUM_TYPE_MAX_ENUM_VAL_01 = INT_MAX, +}; + +struct coresight_set_etm_req_msg_v01 { + /* Mandatory */ + /* ETM output state */ + enum coresight_etm_state_enum_type_v01 state; +}; + +struct coresight_set_etm_resp_msg_v01 { + /* Mandatory */ + struct qmi_response_type_v01 resp; +}; + +static struct qmi_elem_info coresight_set_etm_req_msg_v01_ei[] = { + { + .data_type = QMI_UNSIGNED_4_BYTE, + .elem_len = 1, + .elem_size = sizeof(enum coresight_etm_state_enum_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x01, + .offset = offsetof(struct coresight_set_etm_req_msg_v01, + state), + .ei_array = NULL, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0, + .offset = 0, + .ei_array = NULL, + }, +}; + +static struct qmi_elem_info coresight_set_etm_resp_msg_v01_ei[] = { + { + .data_type = QMI_STRUCT, + .elem_len = 1, + .elem_size = sizeof(struct qmi_response_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x02, + .offset = offsetof(struct coresight_set_etm_resp_msg_v01, + resp), + .ei_array = qmi_response_type_v01_ei, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0, + .offset = 0, + .ei_array = NULL, + }, +}; + +#endif diff --git a/drivers/hwtracing/coresight/coresight-remote-etm.c b/drivers/hwtracing/coresight/coresight-remote-etm.c new file mode 100644 index 000000000000..116578b4131a --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-remote-etm.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/sysfs.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/coresight.h> +#include "coresight-qmi.h" +#include "coresight-priv.h" + +DEFINE_CORESIGHT_DEVLIST(remote_etm_devs, "remote-etm"); + +#define MAX_INSTANCE_ID 0xFF + +struct remote_etm_drvdata { + struct device *dev; + struct coresight_device *csdev; + struct mutex mutex; + struct qmi_handle handle; + u32 qmi_id; + bool enabled; + bool service_connected; + struct sockaddr_qrtr s_addr; +}; + +static int service_remote_etm_new_server(struct qmi_handle *qmi, + struct qmi_service *svc) +{ + struct remote_etm_drvdata *drvdata = container_of(qmi, + struct remote_etm_drvdata, handle); + + drvdata->s_addr.sq_family = AF_QIPCRTR; + drvdata->s_addr.sq_node = svc->node; + drvdata->s_addr.sq_port = svc->port; + drvdata->service_connected = true; + dev_info(drvdata->dev, + "Connection established between QMI handle and %d service\n", + drvdata->qmi_id); + + return 0; +} + +static void service_remote_etm_del_server(struct qmi_handle *qmi, + struct qmi_service *svc) +{ + struct remote_etm_drvdata *drvdata = container_of(qmi, + struct remote_etm_drvdata, handle); + drvdata->service_connected = false; + dev_info(drvdata->dev, + "Connection disconnected between QMI handle and %d service\n", + drvdata->qmi_id); +} + +static struct qmi_ops server_ops = { + .new_server = service_remote_etm_new_server, + .del_server = service_remote_etm_del_server, +}; + +static int remote_etm_enable(struct coresight_device *csdev, + struct perf_event *event, u32 mode) +{ + struct remote_etm_drvdata *drvdata = + dev_get_drvdata(csdev->dev.parent); + struct coresight_set_etm_req_msg_v01 req; + struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } }; + struct qmi_txn txn; + int ret; + + mutex_lock(&drvdata->mutex); + + if (!drvdata->service_connected) { + dev_err(drvdata->dev, "QMI service not connected!\n"); + ret = -EINVAL; + goto err; + } + /* + * The QMI handle may be NULL in the following scenarios: + * 1. QMI service is not present + * 2. QMI service is present but attempt to enable remote ETM is earlier + * than service is ready to handle request + * 3. Connection between QMI client and QMI service failed + * + * Enable CoreSight without processing further QMI commands which + * provides the option to enable remote ETM by other means. + */ + req.state = CORESIGHT_ETM_STATE_ENABLED_V01; + + ret = qmi_txn_init(&drvdata->handle, &txn, + coresight_set_etm_resp_msg_v01_ei, + &resp); + + if (ret < 0) { + dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n", + ret); + goto err; + } + + ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr, + &txn, CORESIGHT_QMI_SET_ETM_REQ_V01, + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, + coresight_set_etm_req_msg_v01_ei, + &req); + if (ret < 0) { + dev_err(drvdata->dev, "QMI send ACK failed, ret:%d\n", + ret); + qmi_txn_cancel(&txn); + goto err; + } + + ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS)); + if (ret < 0) { + dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n", + ret); + goto err; + } + + /* Check the response */ + if (resp.resp.result != QMI_RESULT_SUCCESS_V01) + dev_err(drvdata->dev, "QMI request failed 0x%x\n", + resp.resp.error); + + drvdata->enabled = true; + mutex_unlock(&drvdata->mutex); + + dev_dbg(drvdata->dev, "Remote ETM tracing enabled for instance %d\n", + drvdata->qmi_id); + return 0; +err: + mutex_unlock(&drvdata->mutex); + return ret; +} + +static void remote_etm_disable(struct coresight_device *csdev, + struct perf_event *event) +{ + struct remote_etm_drvdata *drvdata = + dev_get_drvdata(csdev->dev.parent); + struct coresight_set_etm_req_msg_v01 req; + struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } }; + struct qmi_txn txn; + int ret; + + mutex_lock(&drvdata->mutex); + if (!drvdata->service_connected) { + dev_err(drvdata->dev, "QMI service not connected!\n"); + goto err; + } + + req.state = CORESIGHT_ETM_STATE_DISABLED_V01; + + ret = qmi_txn_init(&drvdata->handle, &txn, + coresight_set_etm_resp_msg_v01_ei, + &resp); + + if (ret < 0) { + dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n", + ret); + goto err; + } + + ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr, + &txn, CORESIGHT_QMI_SET_ETM_REQ_V01, + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, + coresight_set_etm_req_msg_v01_ei, + &req); + if (ret < 0) { + dev_err(drvdata->dev, "QMI send req failed, ret:%d\n", + ret); + qmi_txn_cancel(&txn); + goto err; + } + + ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS)); + if (ret < 0) { + dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n", + ret); + goto err; + } + + /* Check the response */ + if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { + dev_err(drvdata->dev, "QMI request failed 0x%x\n", + resp.resp.error); + goto err; + } + + drvdata->enabled = false; + dev_info(drvdata->dev, "Remote ETM tracing disabled for instance %d\n", + drvdata->qmi_id); +err: + mutex_unlock(&drvdata->mutex); +} + +static const struct coresight_ops_source remote_etm_source_ops = { + .enable = remote_etm_enable, + .disable = remote_etm_disable, +}; + +static const struct coresight_ops remote_cs_ops = { + .source_ops = &remote_etm_source_ops, +}; + +static int remote_etm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct coresight_platform_data *pdata; + struct remote_etm_drvdata *drvdata; + struct coresight_desc desc = {0 }; + int ret; + + desc.name = coresight_alloc_device_name(&remote_etm_devs, dev); + if (!desc.name) + return -ENOMEM; + pdata = coresight_get_platform_data(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + pdev->dev.platform_data = pdata; + + pm_runtime_enable(dev); + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->dev = &pdev->dev; + platform_set_drvdata(pdev, drvdata); + + ret = of_property_read_u32(pdev->dev.of_node, "qcom,qmi-id", + &drvdata->qmi_id); + if (ret) + return ret; + + if (drvdata->qmi_id >= MAX_INSTANCE_ID) { + dev_err(dev, "qmi_id is invalid.\n"); + return -EINVAL; + } + + mutex_init(&drvdata->mutex); + + ret = qmi_handle_init(&drvdata->handle, + CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, + &server_ops, NULL); + if (ret < 0) { + dev_err_probe(dev, ret, "Remote ETM client init failed.\n"); + return ret; + } + + qmi_add_lookup(&drvdata->handle, + CORESIGHT_QMI_SVC_ID, + CORESIGHT_QMI_VERSION, + drvdata->qmi_id); + + desc.type = CORESIGHT_DEV_TYPE_SOURCE; + desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS; + desc.ops = &remote_cs_ops; + desc.pdata = pdev->dev.platform_data; + desc.dev = &pdev->dev; + drvdata->csdev = coresight_register(&desc); + if (IS_ERR(drvdata->csdev)) { + ret = PTR_ERR(drvdata->csdev); + goto err; + } + + return 0; +err: + qmi_handle_release(&drvdata->handle); + return ret; +} + +static void remote_etm_remove(struct platform_device *pdev) +{ + struct remote_etm_drvdata *drvdata = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_disable(dev); + qmi_handle_release(&drvdata->handle); + coresight_unregister(drvdata->csdev); +} + +static const struct of_device_id remote_etm_match[] = { + {.compatible = "qcom,coresight-remote-etm"}, + {} +}; + +static struct platform_driver remote_etm_driver = { + .probe = remote_etm_probe, + .remove = remote_etm_remove, + .driver = { + .name = "coresight-remote-etm", + .of_match_table = remote_etm_match, + }, +}; + +module_platform_driver(remote_etm_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CoreSight Remote ETM driver");