Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

next boot: 13 passed 19 failed (next/next-20140320)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:03.40 beaver multi_v7_defconfig : FAILED 2:58.24 capri multi_v7_defconfig : FAILED 2:57.18 cubie sunxi_defconfig : FAILED 1:04.39 cubie multi_v7_defconfig : FAILED 1:04.82 cubie2 sunxi_defconfig : FAILED 1:00.50 cubie2 multi_v7_defconfig : FAILED 1:00.76 cubie2 multi_lpae_defconfig : FAILED 0:58.63 cubox dove_defconfig : BUILD FAILED dalmore tegra_defconfig : FAILED 1:28.70 dalmore multi_v7_defconfig : FAILED 1:04.43 dalmore multi_lpae_defconfig : FAILED 1:04.34 hummingboard multi_v7_defconfig : FAILED 2:56.57 omap5uevm multi_v7_defconfig : FAILED 3:50.59 omap5uevm multi_lpae_defconfig : FAILED 3:49.02 panda multi_v7_defconfig : FAILED 3:13.25 seaboard multi_v7_defconfig : FAILED 3:06.81 snowball multi_v7_defconfig : FAILED 1:12.07 trimslice multi_v7_defconfig : FAILED 3:03.57 wandboard multi_v7_defconfig : FAILED 3:06.26 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:21.74 arndale exynos_defconfig : passed 1:11.88 beaver tegra_defconfig : warnings 1:00.02 capri bcm_defconfig : passed 0:43.36 hummingboard imx_v6_v7_defconfig : warnings 1:25.64 omap5uevm omap2plus_defconfig : warnings 1:11.82 panda omap2plus_defconfig : warnings 1:16.16 sama5 sama5_defconfig : passed 1:48.69 seaboard tegra_defconfig : warnings 1:06.41 snow exynos_defconfig : passed 1:30.69 snowball u8500_defconfig : passed 1:23.80 trimslice tegra_defconfig : warnings 1:00.98 wandboard imx_v6_v7_defconfig : warnings 1:04.08 Offline boards: bbb omap2plus_defconfig : OFFLINE 0:47.07 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.191439] usbcore: registered new interface driver usb-storage [ 1.199844] mousedev: PS/2 mouse device common for all mice [ 1.208257] i2c /dev entries driver [ 1.214715] sdhci: Secure Digital Host Controller Interface driver [ 1.221207] sdhci: Copyright(c) Pierre Ossman [ 1.302540] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.309440] usbcore: registered new interface driver usbhid [ 1.315351] usbhid: USB HID core driver [ 1.324451] TCP: cubic registered [ 1.327954] NET: Registered protocol family 17 [ 1.333031] Key type dns_resolver registered [ 1.338458] ThumbEE CPU extension supported. [ 1.343057] Registering SWP/SWPB emulation handler [ 1.348095] PJ4 iWMMXt coprocessor enabled. [ 1.360369] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.415145] mmc1: BKOPS_EN bit is not set [ 1.421830] mmc1: new high speed MMC card at address 0001 [ 1.428257] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.433254] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.439655] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.446662] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.453330] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.460745] libphy: 4a101000.mdio: probed [ 1.465081] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.474808] Detected MACID = bc:6a:29:7a:42:a8 [ 1.481080] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.495279] ALSA device list: [ 1.498417] No soundcards found. [ 1.503332] mmcblk0: p1 p2 [ 1.509181] mmcblk0boot1: unknown partition table [ 1.516277] mmcblk0boot0: unknown partition table [ 1.523463] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.533255] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.591336] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.599949] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.626003] devtmpfs: mounted [ 1.630127] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.704816] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.294632] [<c050f640>] (bus_for_each_drv) from [<c0510e34>] (device_attach+0x74/0x88) [ 5.302623] [<c0510e34>] (device_attach) from [<c05104dc>] (bus_probe_device+0x84/0xa8) [ 5.310627] [<c05104dc>] (bus_probe_device) from [<c0510918>] (deferred_probe_work_func+0x68/0x98) [ 5.319582] [<c0510918>] (deferred_probe_work_func) from [<c025a224>] (process_one_work+0x10c/0x37c) [ 5.328713] [<c025a224>] (process_one_work) from [<c025af44>] (worker_thread+0x13c/0x404) [ 5.336892] [<c025af44>] (worker_thread) from [<c0260644>] (kthread+0xd8/0xf0) [ 5.344116] [<c0260644>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 5.351321] ---[ end trace 475f0827080dbe97 ]--- [ 5.355949] host1x drm: No connectors reported connected with modes [ 5.362205] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.382163] Console: switching to colour frame buffer device 128x48 [ 5.393911] host1x drm: fb0: frame buffer device [ 5.398602] host1x drm: registered panic notifier [ 5.403305] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.409522] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 5.416920] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 5.428293] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.433705] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.441491] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 5.463068] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.469447] hub 1-0:1.0: USB hub found [ 5.473227] hub 1-0:1.0: 1 port detected [ 5.477569] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.482971] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.490780] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 5.513066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.519346] hub 2-0:1.0: USB hub found [ 5.523121] hub 2-0:1.0: 1 port detected [ 5.531004] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:04 UTC (946684804) [ 5.543975] ALSA device list: [ 5.546942] #0: NVIDIA Tegra Beaver [ 5.553137] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.562027] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 5.576956] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.585083] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.612471] devtmpfs: mounted [ 5.615914] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 5.666665] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140320 #1 [ 1.030000] task: c0991b20 ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07bba00>] lr : [<c027d1dc>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae4388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0991b20 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07bba00>] (_raw_spin_lock_irqsave) from [<c027d1dc>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d1dc>] (__down_read_trylock) from [<c0217dcc>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217dcc>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d54 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae4388 ed83c008 c02083d4 c0217d80 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace 2db66365600be178 ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140320/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4584720 (45f510 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.9 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargsnode: cubie status: on bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.5 MiB/s done Bytes transferred = 1802016 (1b7f20 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140320/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7f20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140320/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140320/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4609160 (465488 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x465488 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140320/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4584720 (45f510 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140320/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 4 MiB/s done Bytes transferred = 1802016 (1b7f20 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140320/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 683.6 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7f20 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) #tftp 0x82000000 next/next-20140320/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140320/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4609160 (465488 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.7 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x465488 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140320/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140320/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4584720 (45f510 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140320/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45f510 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 1.066733] avdd-usb: 3300 mV [ 1.068719] avdd-usb: supplied by vdd-sys-5v0 [ 1.074913] rail-3v3: no parameters [ 1.078824] rail-5v0: no parameters [ 1.082401] REGEN3: no parameters [ 1.085324] SYSEN1: no parameters [ 1.088832] SYSEN2: no parameters [ 1.094152] Linux video capture interface: v2.00 [ 1.100570] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.107517] Advanced Linux Sound Architecture Driver Initialized. [ 1.117208] Bluetooth: Core ver 2.19 [ 1.119319] NET: Registered protocol family 31 [ 1.123489] Bluetooth: HCI device and connection manager initialized [ 1.130012] Bluetooth: HCI socket layer initialized [ 1.134895] Bluetooth: L2CAP socket layer initialized [ 1.140216] Bluetooth: SCO socket layer initialized [ 1.147543] cfg80211: Calling CRDA to update world regulatory domain [ 1.154432] Switched to clocksource arch_sys_counter [ 1.242525] NET: Registered protocol family 2 [ 1.248959] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.254629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.261342] TCP: Hash tables configured (established 8192 bind 8192) [ 1.268817] TCP: reno registered [ 1.270437] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.276591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.284088] NET: Registered protocol family 1 [ 1.289759] RPC: Registered named UNIX socket transport module. [ 1.293886] RPC: Registered udp transport module. [ 1.298828] RPC: Registered tcp transport module. [ 1.303419] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.309997] PCI: CLS 0 bytes, default 64 [ 1.329542] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.338007] bounce pool size: 64 pages [ 1.345446] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.352353] msgmni has been set to 1468 [ 1.360995] io scheduler noop registered (default) [ 1.393427] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.400483] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.408809] tegra114-pinctrl 70000868.pinmux: Error applying setting, re~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.985245] hub 1-0:1.0: 1 port detected [ 0.990397] ci_hdrc ci_hdrc.1: doesn't support gadget [ 0.995504] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.000424] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.025296] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.031416] hub 2-0:1.0: USB hub found [ 1.035211] hub 2-0:1.0: 1 port detected [ 1.039915] mousedev: PS/2 mouse device common for all mice [ 1.047465] i2c /dev entries driver [ 1.053293] sdhci: Secure Digital Host Controller Interface driver [ 1.059523] sdhci: Copyright(c) Pierre Ossman [ 1.064585] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.071152] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.080343] mmc0: no vqmmc regulator found [ 1.125304] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.133265] usbcore: registered new interface driver usbhid [ 1.138882] usbhid: USB HID core driver [ 1.149360] TCP: cubic registered [ 1.152717] NET: Registered protocol family 17 [ 1.157397] Key type dns_resolver registered [ 1.161791] ThumbEE CPU extension supported. [ 1.166117] Registering SWP/SWPB emulation handler [ 1.170917] PJ4 iWMMXt coprocessor enabled. [ 1.178588] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.193736] ALSA device list: [ 1.196793] No soundcards found. [ 1.200853] Waiting for root device /dev/mmcblk0p2... [ 1.252909] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.267044] mmc0: new high speed SDHC card at address b368 [ 1.272907] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.278875] mmcblk0: p1 p2 [ 1.316637] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.325731] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.347714] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.355873] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.371895] devtmpfs: mounted [ 1.375259] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.422410] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 46.690021] smps7: 1800 mV [ 46.694228] smps8: 600 <--> 1310 mV at 1040 mV [ 46.700212] smps9: 2100 mV [ 46.704038] smps10_out2: 5000 mV [ 46.708272] smps10_out1: 5000 mV [ 46.712142] ldo1: 1500 <--> 1800 mV [ 46.716750] ldo2: 2800 mV [ 46.721091] ldo3: 1500 mV [ 46.724536] ldo4: 1500 <--> 1800 mV [ 46.729772] ldo5: 1800 mV [ 46.735595] ldo6: 1200 mV [ 46.739289] ldo7: 2000 mV [ 46.743629] ldo8: 3000 mV [ 46.747832] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.753976] ldoln: 1800 mV [ 46.758394] ldousb: 3250 mV [ 46.761892] REGEN1: no parameters [ 46.765444] REGEN2: no parameters [ 46.769159] regen3: no parameters [ 46.772949] SYSEN1: no parameters [ 46.776500] SYSEN2: no parameters [ 47.018701] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.025814] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.033119] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.078781] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.092236] ALSA device list: [ 47.095367] No soundcards found. [ 47.099395] Waiting for root device /dev/mmcblk1p2... [ 47.135273] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.145491] mmc2: new high speed SDHC card at address 0001 [ 47.151462] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.156941] mmcblk1: p1 p2 [ 47.208929] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.217777] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.242418] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.250888] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.266062] devtmpfs: mounted [ 47.269449] Freeing unused kernel memory: 552K (c0a57000 - c0ae1000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.579795] smps7: 1800 mV [ 47.583986] smps8: 600 <--> 1310 mV at 1040 mV [ 47.589937] smps9: 2100 mV [ 47.593760] smps10_out2: 5000 mV [ 47.597963] smps10_out1: 5000 mV [ 47.601816] ldo1: 1500 <--> 1800 mV [ 47.606409] ldo2: 2800 mV [ 47.610753] ldo3: 1500 mV [ 47.614204] ldo4: 1500 <--> 1800 mV [ 47.619462] ldo5: 1800 mV [ 47.625278] ldo6: 1200 mV [ 47.628978] ldo7: 2000 mV [ 47.633306] ldo8: 3000 mV [ 47.637493] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.643652] ldoln: 1800 mV [ 47.648060] ldousb: 3250 mV [ 47.651559] REGEN1: no parameters [ 47.655104] REGEN2: no parameters [ 47.658815] regen3: no parameters [ 47.662594] SYSEN1: no parameters [ 47.666136] SYSEN2: no parameters [ 47.908845] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.915948] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.923252] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.968931] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.982448] ALSA device list: [ 47.985579] No soundcards found. [ 47.989600] Waiting for root device /dev/mmcblk1p2... [ 48.025405] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.035619] mmc2: new high speed SDHC card at address 0001 [ 48.041580] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.047054] mmcblk1: p1 p2 [ 48.099076] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.107930] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.132575] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.141060] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.156239] devtmpfs: mounted [ 48.159613] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.741119] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.746551] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.751556] VDAC: 1800 mV [ 1.752014] VANA: 2100 mV [ 1.758819] VCXIO: 1800 mV [ 1.761749] VUSB: 3300 mV [ 1.765716] V1V8: 1800 mV [ 1.769256] V2V1: 2100 mV [ 1.775299] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.849060] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.060089] hub 1-1:1.0: USB hub found [ 2.064178] hub 1-1:1.0: 5 ports detected [ 2.118865] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.359191] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.421173] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.501586] smsc95xx v1.0.4 [ 2.563293] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 02:b8:ed:de:58:b0 [ 2.728637] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.736663] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 4.749664] gic_timer_retrigger: lost localtimer interrupt [ 4.870330] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 4.884704] ALSA device list: [ 4.887908] No soundcards found. [ 4.891937] Waiting for root device /dev/mmcblk0p2... [ 4.904998] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.915527] mmc0: new high speed SDHC card at address b368 [ 4.921661] mmcblk0: mmc0:b368 00000 7.51 GiB [ 4.928192] mmcblk0: p1 p2 [ 4.936279] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 4.954895] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.961639] mmc1: new SDIO card at address 0001 [ 5.002044] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 5.011505] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 5.033905] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.033905] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.058258] devtmpfs: mounted [ 5.061401] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 5.109741] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 4.934613] [<c04d9a44>] (drm_fb_helper_initial_config) from [<c04f5864>] (tegra_drm_fb_init+0x9c/0x110) [ 4.944097] [<c04f5864>] (tegra_drm_fb_init) from [<c04f4568>] (tegra_drm_load+0xa0/0xc0) [ 4.952282] [<c04f4568>] (tegra_drm_load) from [<c04e233c>] (drm_dev_register+0xa8/0x104) [ 4.960454] [<c04e233c>] (drm_dev_register) from [<c04f4138>] (drm_host1x_init+0x30/0x8c) [ 4.968637] [<c04f4138>] (drm_host1x_init) from [<c0504894>] (host1x_subdev_register+0xb4/0xd0) [ 4.977339] [<c0504894>] (host1x_subdev_register) from [<c0504e40>] (host1x_client_register+0xf8/0x11c) [ 4.986735] [<c0504e40>] (host1x_client_register) from [<c04f8598>] (tegra_dc_probe+0x154/0x290) [ 4.995526] [<c04f8598>] (tegra_dc_probe) from [<c051272c>] (platform_drv_probe+0x18/0x48) [ 5.003910] [<c051272c>] (platform_drv_probe) from [<c0510f88>] (driver_probe_device+0x124/0x240) [ 5.012808] [<c0510f88>] (driver_probe_device) from [<c050f640>] (bus_for_each_drv+0x58/0x8c) [ 5.021316] [<c050f640>] (bus_for_each_drv) from [<c0510e34>] (device_attach+0x74/0x88) [ 5.029321] [<c0510e34>] (device_attach) from [<c05104dc>] (bus_probe_device+0x84/0xa8) [ 5.037319] [<c05104dc>] (bus_probe_device) from [<c0510918>] (deferred_probe_work_func+0x68/0x98) [ 5.046274] [<c0510918>] (deferred_probe_work_func) from [<c025a224>] (process_one_work+0x10c/0x37c) [ 5.055403] [<c025a224>] (process_one_work) from [<c025af44>] (worker_thread+0x13c/0x404) [ 5.063576] [<c025af44>] (worker_thread) from [<c0260644>] (kthread+0xd8/0xf0) [ 5.070787] [<c0260644>] (kthread) from [<c020e678>] (ret_from_fork+0x14/0x3c) [ 5.077997] ---[ end trace 730d54a0138490bf ]--- [ 5.121533] Console: switching to colour frame buffer device 170x48 [ 5.137903] host1x drm: fb0: frame buffer device [ 5.142602] host1x drm: registered panic notifier [ 5.147297] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.156083] tegra-ehci c5000000.usb: EHCI Host Controller [ 5.161485] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 5.169359] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 5.176604] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 5.192151] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 5.198577] hub 3-0:1.0: USB hub found [ 5.202361] hub 3-0:1.0: 1 port detected [ 5.207087] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 5.214304] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-20 08:05:03 UTC (1395302703) [ 5.226232] ALSA device list: [ 5.229193] #0: NVIDIA Tegra Seaboard [ 5.237719] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 5.275789] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.283921] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 5.316754] devtmpfs: mounted [ 5.320237] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-je5JuK/tmp0jL5ol-uImage tftp 0x00100000 tmp/snowball-je5JuK/tmp0jL5ol-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-je5JuK/tmp0jL5ol-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 4626033 (469671 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4625969 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.413852] hub 2-0:1.0: USB hub found [ 3.417651] hub 2-0:1.0: 1 port detected [ 3.425638] tegra-ehci c5000000.usb: EHCI Host Controller [ 3.431079] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 3.438914] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 3.457117] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 3.463898] hub 3-0:1.0: USB hub found [ 3.467715] hub 3-0:1.0: 1 port detected [ 3.472770] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 3.480148] rtc-em3027 2-0056: setting system clock to 2014-03-20 08:05:02 UTC (1395302702) [ 3.493010] ALSA device list: [ 3.495977] #0: tegra-trimslice [ 3.499982] Waiting for root device /dev/sda1... [ 3.737111] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.889943] hub 2-1:1.0: USB hub found [ 3.893995] hub 2-1:1.0: 4 ports detected [ 4.067255] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 4.282713] usb-storage 3-1:1.0: USB Mass Storage device detected [ 4.289720] scsi0 : usb-storage 3-1:1.0 [ 4.387464] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 4.850528] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 6.180274] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 6.191167] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 6.200200] sd 0:0:0:0: [sda] Write Protect is off [ 6.206325] sd 0:0:0:0: [sda] No Caching mode page found [ 6.211742] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.222597] sd 0:0:0:0: [sda] No Caching mode page found [ 6.228020] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.236244] sda: sda1 [ 6.244100] sd 0:0:0:0: [sda] No Caching mode page found [ 6.249532] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.255654] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.261858] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 6.271237] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 6.310008] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.317797] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 6.338446] devtmpfs: mounted [ 6.342835] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.376348] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.377578] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.390752] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.408199] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.419057] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.421186] mmc1: new SDIO card at address 0001 [ 1.431737] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.448417] devtmpfs: mounted [ 1.451845] Freeing unused kernel memory: 544K (c0a4f000 - c0ad7000) [ 1.486726] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.496187] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.501341] mmc2: new high speed SDHC card at address 0001 [ 1.508468] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.515611] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.522142] Internal error: : 1 [#2] SMP ARM [ 1.526414] Modules linked in: [ 1.529492] CPU: 0 PID: 29042 Comm: %s [ 1.529492] Not tainted 3.14.0-rc7-next-20140320 #1 [ 1.538289] task: c0991b20 ti: ec846000 task.ti: 70737573 [ 1.543704] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.548765] LR is at __down_read_trylock+0x14/0x54 [ 1.553561] pc : [<c07bba00>] lr : [<c027d1dc>] psr: 40000193 [ 1.553561] sp : ec847fd8 ip : c0ae4388 fp : ec8480c0 [ 1.565040] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.570267] r7 : c0991b20 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.576796] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.583328] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.590552] Control: 10c5387d Table: 3cd1804a DAC: 00000015 [ 1.596300] Process %s [ 1.596300] (pid: 29042, stack limit = 0x707377c3) [ 1.603614] Stack: (0xec847fd8 to 0x70739573) [ 1.607990] [<c07bba00>] (_raw_spin_lock_irqsave) from [<c027d1dc>] (__down_read_trylock+0x14/0x54) [ 1.617058] [<c027d1dc>] (__down_read_trylock) from [<c0217dcc>] (do_page_fault+0x78/0x27c) [ 1.625419] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.631522] ---[ end trace 8512aecde62b3646 ]--- [ 1.636146] Alignment trap: not handling instruction e1923f9f at [<c07bb9fc>] [ 1.643284] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.319018] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next build: 13 warnings 8 failures (next/next-20140320)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: a654dc79 Add linux-next specific files for 20140320 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140320/ Runtime: 47m 18s Passed: 116 Failed: 8 Warnings: 13 Section mismatches: 38 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig omap1_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' omap1_defconfig: arch/arm/mach-omap1/ams-delta-fiq.c:50:2: error: implicit declaration of function 'irq_get_irq_chip' [-Werror=implicit-function-declaration] orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 arch/arm/mach-omap1/ams-delta-fiq.c:50:11: warning: assignment makes pointer from integer without a cast [enabled by default] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mfd/sec-core.c:345:45: warning: 'regmap_rtc' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x547ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x548b0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x54974): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c0ac): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c170): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c234): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x5436c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x54430): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x544f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b66c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b730): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b7f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x92a8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x936c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x9430): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x164): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x228): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x2ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a1f8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a2bc): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a380): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init()

10 years, 6 months

mainline boot: 48 pass, 0 fail (v3.14-rc7-33-g8878439)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-33-g8878439 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.7 sec legacy,da850evm PASS: 0 min 14.7 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 57.6 sec am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 1 min 5.7 sec legacy,3530beagle PASS: 0 min 46.5 sec omap4-panda PASS: 1 min 5.2 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 25.4 sec omap5-uevm PASS: 0 min 59.4 sec omap4-panda-es PASS: 1 min 7.6 sec legacy,3730storm PASS: 0 min 23.9 sec legacy,3530overo PASS: 0 min 24.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 52.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 16.7 sec sun4i-a10-cubieboard PASS: 0 min 13.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 18.3 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 57.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 54.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec bcm28155-ap PASS: 1 min 9.4 sec omap3-overo-tobi PASS: 0 min 21.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec am335x-bone PASS: 0 min 26.4 sec omap3-overo-storm-tobi PASS: 0 min 21.3 sec omap5-uevm PASS: 1 min 55.5 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 54.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 32.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.2 sec

10 years, 6 months

mainline boot: 31 passed 1 failed (mainline/v3.14-rc7-33-g8878439)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:38.78 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.38 arndale exynos_defconfig : passed 1:01.72 bbb multi_v7_defconfig : passed 1:09.94 beaver tegra_defconfig : passed 0:57.04 beaver multi_v7_defconfig : passed 0:50.04 capri bcm_defconfig : passed 0:42.92 capri multi_v7_defconfig : passed 0:43.90 cubie sunxi_defconfig : passed 0:55.37 cubie multi_v7_defconfig : passed 1:02.88 cubie2 sunxi_defconfig : passed 0:49.98 cubie2 multi_v7_defconfig : passed 1:00.52 cubie2 multi_lpae_defconfig : passed 0:53.21 cubox dove_defconfig : passed 1:12.79 dalmore tegra_defconfig : passed 1:23.26 dalmore multi_v7_defconfig : passed 1:16.51 dalmore multi_lpae_defconfig : passed 1:14.21 hummingboard imx_v6_v7_defconfig : passed 1:21.43 hummingboard multi_v7_defconfig : passed 1:08.89 omap5uevm multi_v7_defconfig : warnings 1:37.47 omap5uevm multi_lpae_defconfig : warnings 1:35.16 panda omap2plus_defconfig : passed 1:16.15 sama5 sama5_defconfig : passed 1:54.06 seaboard tegra_defconfig : passed 1:01.22 seaboard multi_v7_defconfig : passed 1:08.94 snow exynos_defconfig : passed 1:24.85 snowball u8500_defconfig : passed 1:32.25 snowball multi_v7_defconfig : passed 2:27.36 trimslice tegra_defconfig : passed 0:59.45 trimslice multi_v7_defconfig : passed 1:09.17 wandboard imx_v6_v7_defconfig : passed 1:00.61 wandboard multi_v7_defconfig : passed 1:07.02 Offline boards: bbb omap2plus_defconfig : OFFLINE 0:47.22 omap5uevm omap2plus_defconfig : OFFLINE 2:19.01 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.599426] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.606414] usbcore: registered new interface driver usbhid [ 1.612274] usbhid: USB HID core driver [ 1.619812] TCP: cubic registered [ 1.623321] NET: Registered protocol family 17 [ 1.628143] Key type dns_resolver registered [ 1.633087] Power Management for TI OMAP4+ devices. [ 1.638244] Power Management for TI OMAP4. [ 1.642547] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.649963] Registering SWP/SWPB emulation handler [ 1.655517] regulator-dummy: disabling [ 1.659667] vwl1271: 1800 mV [ 1.664245] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.673980] twl 0-0048: PIH (irq 39) nested IRQs [ 1.679595] twl_rtc rtc.11: Power up reset detected. [ 1.685455] twl_rtc rtc.11: Enabling TWL-RTC [ 1.692352] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.699279] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.705322] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.711395] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.717468] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.722961] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.728393] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.733428] VDAC: 1800 mV [ 1.733856] VANA: 2100 mV [ 1.740631] VCXIO: 1800 mV [ 1.740631] VUSB: 3300 mV [ 1.747528] V1V8: 1800 mV [ 1.751098] V2V1: 2100 mV [ 1.756988] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.878265] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.031890] hub 1-1:1.0: USB hub found [ 2.036132] hub 1-1:1.0: 5 ports detected [ 2.040710] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.139068] gic_timer_retrigger: lost localtimer interrupt [ 2.319915] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.344604] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 11.500762] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc7-33-g8878439)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 8878439 mm: fix bad rss-counter if remap_file_pages raced migration Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc7-33-g8878439/ Runtime: 30m 15s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 6 months

mainline boot: 48 pass, 0 fail (v3.14-rc7-28-gea1cd65)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-28-gea1cd65 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.7 sec legacy,da850evm PASS: 0 min 14.7 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.3 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 0 min 57.4 sec legacy,3530beagle PASS: 0 min 36.3 sec omap4-panda PASS: 1 min 10.7 sec omap3-overo-tobi PASS: 0 min 23.8 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap5-uevm PASS: 1 min 4.7 sec omap4-panda-es PASS: 1 min 4.8 sec legacy,3730storm PASS: 0 min 21.2 sec legacy,3530overo PASS: 0 min 21.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 48.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.4 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec sun4i-a10-cubieboard PASS: 0 min 16.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.3 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.6 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 51.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 58.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 9.2 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.8 sec omap5-uevm PASS: 1 min 47.8 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 57.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 6 months

mainline boot: 32 passed 1 failed (mainline/v3.14-rc7-28-gea1cd65)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:24.12 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.59 arndale exynos_defconfig : passed 1:06.98 bbb omap2plus_defconfig : passed 1:37.48 bbb multi_v7_defconfig : passed 1:27.94 beaver tegra_defconfig : passed 0:56.21 beaver multi_v7_defconfig : passed 0:56.48 capri bcm_defconfig : passed 0:43.75 capri multi_v7_defconfig : passed 0:44.10 cubie sunxi_defconfig : passed 1:11.53 cubie multi_v7_defconfig : passed 0:58.29 cubie2 sunxi_defconfig : passed 1:00.91 cubie2 multi_v7_defconfig : passed 1:04.68 cubie2 multi_lpae_defconfig : passed 0:53.82 cubox dove_defconfig : passed 1:00.47 dalmore tegra_defconfig : passed 1:19.85 dalmore multi_v7_defconfig : passed 1:19.13 dalmore multi_lpae_defconfig : passed 1:20.67 hummingboard imx_v6_v7_defconfig : passed 1:18.40 hummingboard multi_v7_defconfig : passed 1:06.83 omap5uevm multi_v7_defconfig : warnings 1:38.60 omap5uevm multi_lpae_defconfig : warnings 1:36.39 panda omap2plus_defconfig : passed 1:16.35 sama5 sama5_defconfig : passed 1:52.39 seaboard tegra_defconfig : passed 1:00.65 seaboard multi_v7_defconfig : passed 1:09.60 snow exynos_defconfig : passed 1:23.93 snowball u8500_defconfig : passed 1:34.12 snowball multi_v7_defconfig : passed 2:13.87 trimslice tegra_defconfig : passed 1:00.09 trimslice multi_v7_defconfig : passed 1:13.61 wandboard imx_v6_v7_defconfig : passed 0:56.35 wandboard multi_v7_defconfig : passed 1:00.03 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:31.06 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- Linux panda 3.14.0-rc7-00028-gea1cd65 #1 SMP Wed Mar 19 09:37:47 PDT 2014 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@panda:~# cat /proc/cmdline cat /proc/cmdline[ 19.614685] gic_timer_retrigger: lost localtimer interrupt console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk root@panda:~# uname -r uname -r 3.14.0-rc7-00028-gea1cd65 root@panda:~# cat /proc/cpuinfo cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 10 (v7l) Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Generic OMAP4 (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000 ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: cat /proc/cpuinfo.

10 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc7-28-gea1cd65)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ea1cd65 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc7-28-gea1cd65/ Runtime: 26m 30s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 6 months

next boot: 20 pass, 24 fail (next-20140319)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140319 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.6 sec am335x-boneblack FAIL: 0 min 28.8 sec omap3-beagle-xm FAIL: 0 min 53.7 sec legacy,3530beagle PASS: 0 min 46.1 sec omap4-panda FAIL: 0 min 56.4 sec omap3-overo-tobi FAIL: 0 min 31.0 sec am335x-bone FAIL: 0 min 30.2 sec omap3-overo-storm-tobi FAIL: 0 min 29.0 sec omap5-uevm FAIL: 0 min 57.5 sec omap4-panda-es FAIL: 0 min 58.0 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- omap5-uevm FAIL: 0 min 60.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 20.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 20.8 sec imx6q-wandboard PASS: 0 min 20.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.2 sec sun4i-a10-cubieboard FAIL: 0 min 19.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 9.6 sec ste-snowball FAIL: 0 min 33.6 sec tegra30-beaver PASS: 0 min 21.0 sec am335x-boneblack FAIL: 0 min 29.2 sec omap3-beagle-xm FAIL: 0 min 54.2 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.5 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda FAIL: 0 min 54.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 19.8 sec bcm28155-ap FAIL: 16 min 16.2 sec omap3-overo-tobi FAIL: 0 min 28.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone FAIL: 0 min 30.6 sec omap3-overo-storm-tobi FAIL: 0 min 26.3 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es FAIL: 0 min 53.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.6 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot#setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot#tftp 0x80200000 192.168.1.2:tmp/am335xboneb-ov47i1/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-ov47i1/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-ov47i1/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot#tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-ov47i1/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-ov47i1/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-ov47i1/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1.1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.79 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-FgoxWp/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-FgoxWp/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-FgoxWp/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 409.2 KiB/s done Bytes transferred = 4306968 (41b818 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-FgoxWp/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-FgoxWp/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-FgoxWp/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 10.7 KiB/s done Bytes transferred = 58597 (e4e5 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff624e4 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.68 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-eO_mP3/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-eO_mP3/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-eO_mP3/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 471.7 KiB/s done Bytes transferred = 4306968 (41b818 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 105.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-eO_mP3/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-eO_mP3/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-eO_mP3/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 9.8 KiB/s done Bytes transferred = 51803 (ca5b hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fa5a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.40 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-hKU9CW/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-hKU9CW/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-hKU9CW/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306968 (41b818 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-hKU9CW/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-hKU9CW/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-hKU9CW/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.2 MiB/s done Bytes transferred = 61262 (ef4e hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62f4d ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.98 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-FWZD6v/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-FWZD6v/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-FWZD6v/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-FWZD6v/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-FWZD6v/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-FWZD6v/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28886 (70d6 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a0d5 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.20 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-2ZSXkB/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-2ZSXkB/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-2ZSXkB/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306968 (41b818 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-2ZSXkB/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-2ZSXkB/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-2ZSXkB/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 62106 (f29a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff299 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.96 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- scanning bus 0 for devices... found: 002/104 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-5Gdz3M/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-5Gdz3M/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-5Gdz3M/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 421.9 KiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 91.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-5Gdz3M/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-5Gdz3M/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-5Gdz3M/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 7.8 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x41b818 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8df53 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.52 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pcKqUf/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pcKqUf/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-pcKqUf/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 470.7 KiB/s done Bytes transferred = 4306968 (41b818 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda #tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pcKqUf/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pcKqUf/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-pcKqUf/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 6.8 KiB/s done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.97 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/120 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-YcRptJ/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-YcRptJ/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-YcRptJ/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 445.3 KiB/s done Bytes transferred = 4605720 (464718 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-YcRptJ/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-YcRptJ/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-YcRptJ/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T #### 6.8 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x464718 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8df53 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.99 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-52GB_5/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-52GB_5/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-52GB_5/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4605720 (464718 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-52GB_5/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-52GB_5/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-52GB_5/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464718 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.99 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-DOP9jp/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-DOP9jp/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-DOP9jp/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-DOP9jp/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-DOP9jp/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-DOP9jp/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.22 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-Gzlg79/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-Gzlg79/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Gzlg79/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-Gzlg79/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-Gzlg79/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Gzlg79/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.34 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-nKNwOM/tmpUhqZvG-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-nKNwOM/tmpUhqZvG-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-nKNwOM/tmpUhqZvG-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4621569 (468501 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621505 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.65 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-zWWXKs/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-zWWXKs/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-zWWXKs/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot#tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-zWWXKs/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-zWWXKs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-zWWXKs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.20 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-6vz2FQ/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-6vz2FQ/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-6vz2FQ/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 428.7 KiB/s done Bytes transferred = 4580256 (45e3a0 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org #tftp 0x81f00000 192.168.1.2:tmp/3730xm-6vz2FQ/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-6vz2FQ/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-6vz2FQ/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 10.7 KiB/s done Bytes transferred = 58597 (e4e5 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff624e4 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.25 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-pfaAdp/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-pfaAdp/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-pfaAdp/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-pfaAdp/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-pfaAdp/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-pfaAdp/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.46 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-csYi6q/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-csYi6q/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-csYi6q/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 494.1 KiB/s done Bytes transferred = 4580256 (45e3a0 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-csYi6q/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-csYi6q/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-csYi6q/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 9.8 KiB/s done Bytes transferred = 51803 (ca5b hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fa5a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.22 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-9tm_rp/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-9tm_rp/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-9tm_rp/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-9tm_rp/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-9tm_rp/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-9tm_rp/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.84 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.060000] ---[ end trace 7256d7a93b10ee34 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae <LAVA_DISPATCHER>2014-03-19 08:46:16 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:46:46 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:47:16 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:47:46 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:48:17 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:48:47 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-19 08:49:17 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0x9b6d02c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 23f9f at [<c07ba864>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae before (last 100 chars): 23f9f at [<c07ba864>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 27407 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x949a60c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-03-19 08:49:17 AM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-03-19 08:49:19 AM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-03-19 08:59:21 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-03-19 08:59:21 AM INFO: CriticalError <LAVA_DISPATCHER>2014-03-19 08:59:21 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-19 08:59:22 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-03-19 08:59:22 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/1179e9ad9267acafd46bc3a42dd7a5ca… LBOOT: Result: FAIL LBOOT: Time: 976.17 seconds. omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-DeN5vT/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-DeN5vT/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-DeN5vT/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.4 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-DeN5vT/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-DeN5vT/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-DeN5vT/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.2 MiB/s done Bytes transferred = 61262 (ef4e hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62f4d ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.01 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-YstuYA/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-YstuYA/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-YstuYA/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-YstuYA/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-YstuYA/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-YstuYA/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28886 (70d6 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a0d5 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.58 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-lNsNjE/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-lNsNjE/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-lNsNjE/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.4 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-lNsNjE/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-lNsNjE/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-lNsNjE/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.4 MiB/s done Bytes transferred = 62106 (f29a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff299 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.31 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/104 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Panda # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-x02RBt/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-x02RBt/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-x02RBt/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 548.8 KiB/s done Bytes transferred = 4580256 (45e3a0 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 110.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-x02RBt/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-x02RBt/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-x02RBt/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 9.8 KiB/s done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.62 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

next boot: 11 passed 22 failed (next/next-20140319)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:15.37 bbb multi_v7_defconfig : FAILED 1:10.02 beaver multi_v7_defconfig : FAILED 2:59.30 capri multi_v7_defconfig : FAILED 2:57.05 cubie sunxi_defconfig : FAILED 1:02.92 cubie multi_v7_defconfig : FAILED 1:00.64 cubie2 sunxi_defconfig : FAILED 1:00.79 cubie2 multi_v7_defconfig : FAILED 1:02.74 cubie2 multi_lpae_defconfig : FAILED 0:58.76 cubox dove_defconfig : BUILD FAILED dalmore tegra_defconfig : FAILED 1:31.50 dalmore multi_v7_defconfig : FAILED 1:04.27 dalmore multi_lpae_defconfig : FAILED 1:04.81 hummingboard multi_v7_defconfig : FAILED 2:55.79 omap5uevm omap2plus_defconfig : FAILED 1:32.15 omap5uevm multi_v7_defconfig : FAILED 1:14.43 omap5uevm multi_lpae_defconfig : FAILED 1:10.99 panda omap2plus_defconfig : FAILED 1:13.63 panda multi_v7_defconfig : FAILED 1:14.09 seaboard multi_v7_defconfig : FAILED 3:08.88 snowball multi_v7_defconfig : FAILED 1:15.20 trimslice multi_v7_defconfig : FAILED 3:06.37 wandboard multi_v7_defconfig : FAILED 3:06.98 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.87 arndale exynos_defconfig : passed 1:12.78 beaver tegra_defconfig : warnings 0:56.90 capri bcm_defconfig : passed 0:42.56 hummingboard imx_v6_v7_defconfig : warnings 1:27.12 sama5 sama5_defconfig : passed 1:49.69 seaboard tegra_defconfig : warnings 1:11.04 snow exynos_defconfig : passed 1:33.87 snowball u8500_defconfig : passed 1:38.73 trimslice tegra_defconfig : warnings 1:04.89 wandboard imx_v6_v7_defconfig : warnings 1:02.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################node: bbb status: on ################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 668.9 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/omap2plus_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1.1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.298627] [<c050e548>] (bus_for_each_drv) from [<c050fd3c>] (device_attach+0x74/0x88) [ 5.306631] [<c050fd3c>] (device_attach) from [<c050f3e4>] (bus_probe_device+0x84/0xa8) [ 5.314634] [<c050f3e4>] (bus_probe_device) from [<c050f820>] (deferred_probe_work_func+0x68/0x98) [ 5.323592] [<c050f820>] (deferred_probe_work_func) from [<c025a1a4>] (process_one_work+0x10c/0x37c) [ 5.332710] [<c025a1a4>] (process_one_work) from [<c025aec4>] (worker_thread+0x13c/0x404) [ 5.340886] [<c025aec4>] (worker_thread) from [<c02605c4>] (kthread+0xd8/0xf0) [ 5.348107] [<c02605c4>] (kthread) from [<c020e638>] (ret_from_fork+0x14/0x3c) [ 5.355324] ---[ end trace ccae67a38264866c ]--- [ 5.359938] host1x drm: No connectors reported connected with modes [ 5.366208] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.385873] Console: switching to colour frame buffer device 128x48 [ 5.397609] host1x drm: fb0: frame buffer device [ 5.402300] host1x drm: registered panic notifier [ 5.407003] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.413218] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 5.420592] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 5.431937] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.437348] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.445141] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 5.463055] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.469424] hub 1-0:1.0: USB hub found [ 5.473203] hub 1-0:1.0: 1 port detected [ 5.477540] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.482935] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.490743] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 5.513046] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.519330] hub 2-0:1.0: USB hub found [ 5.523105] hub 2-0:1.0: 1 port detected [ 5.530997] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:04 UTC (946684804) [ 5.543962] ALSA device list: [ 5.546929] #0: NVIDIA Tegra Beaver [ 5.553120] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.562004] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 5.579271] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.587382] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.599797] devtmpfs: mounted [ 5.603265] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 5.662951] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140319 #1 [ 1.030000] task: c0990acc ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07ba868>] lr : [<c027d15c>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae2388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0990acc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07ba868>] (_raw_spin_lock_irqsave) from [<c027d15c>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d15c>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217d8c>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d14 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae2388 ed83c008 c02083d4 c0217d40 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace f46a64ce9c601cbc ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140319/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ########################################node: cubie status: on ######################### ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140319/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140319/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4605720 (464718 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000node: cubie2 status: on 000 next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140319/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140319/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 4 MiB/s done Bytes transferred = 1801888 (1b7ea0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140319/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 4.3 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ea0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.8 MiB/s done Bytes transferred = 4605720 (464718 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.7 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) #bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140319/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140319/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 1.062018] avdd-usb: 3300 mV [ 1.064016] avdd-usb: supplied by vdd-sys-5v0 [ 1.070233] rail-3v3: no parameters [ 1.074165] rail-5v0: no parameters [ 1.077751] REGEN3: no parameters [ 1.080673] SYSEN1: no parameters [ 1.084180] SYSEN2: no parameters [ 1.089373] Linux video capture interface: v2.00 [ 1.095907] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.102854] Advanced Linux Sound Architecture Driver Initialized. [ 1.112580] Bluetooth: Core ver 2.19 [ 1.114690] NET: Registered protocol family 31 [ 1.118862] Bluetooth: HCI device and connection manager initialized [ 1.125386] Bluetooth: HCI socket layer initialized [ 1.130270] Bluetooth: L2CAP socket layer initialized [ 1.135591] Bluetooth: SCO socket layer initialized [ 1.142897] cfg80211: Calling CRDA to update world regulatory domain [ 1.149777] Switched to clocksource arch_sys_counter [ 1.238220] NET: Registered protocol family 2 [ 1.244652] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.250331] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.257034] TCP: Hash tables configured (established 8192 bind 8192) [ 1.264504] TCP: reno registered [ 1.266127] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.272279] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.279836] NET: Registered protocol family 1 [ 1.285543] RPC: Registered named UNIX socket transport module. [ 1.289663] RPC: Registered udp transport module. [ 1.294497] RPC: Registered tcp transport module. [ 1.299198] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.305765] PCI: CLS 0 bytes, default 64 [ 1.325132] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.333842] bounce pool size: 64 pages [ 1.341518] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.348499] msgmni has been set to 1468 [ 1.357223] io scheduler noop registered (default) [ 1.389455] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.396511] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.404820] tegra114-pinctrl 70000868.pinmux: Error applying setting,~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.985619] hub 1-0:1.0: 1 port detected [ 0.990791] ci_hdrc ci_hdrc.1: doesn't support gadget [ 0.995892] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.000810] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.025669] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.031803] hub 2-0:1.0: USB hub found [ 1.035595] hub 2-0:1.0: 1 port detected [ 1.040314] mousedev: PS/2 mouse device common for all mice [ 1.047860] i2c /dev entries driver [ 1.053685] sdhci: Secure Digital Host Controller Interface driver [ 1.059917] sdhci: Copyright(c) Pierre Ossman [ 1.064966] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.071524] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.080717] mmc0: no vqmmc regulator found [ 1.125676] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.133633] usbcore: registered new interface driver usbhid [ 1.139251] usbhid: USB HID core driver [ 1.149756] TCP: cubic registered [ 1.153113] NET: Registered protocol family 17 [ 1.157780] Key type dns_resolver registered [ 1.162181] ThumbEE CPU extension supported. [ 1.166508] Registering SWP/SWPB emulation handler [ 1.171309] PJ4 iWMMXt coprocessor enabled. [ 1.178960] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.194133] ALSA device list: [ 1.197191] No soundcards found. [ 1.201250] Waiting for root device /dev/mmcblk0p2... [ 1.253277] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.267408] mmc0: new high speed SDHC card at address b368 [ 1.273260] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.279259] mmcblk0: p1 p2 [ 1.317012] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.326127] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.348033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.356191] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.372237] devtmpfs: mounted [ 1.375600] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.422730] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.3 MiB/s done Bytes transferred = 4605720 (464718 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2.3 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x464718 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.1 MiB/s done Bytes transferred = 4580256 (45e3a0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x45e3a0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.3 MiB/s done Bytes transferred = 4306968 (41b818 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 2.1 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x41b818 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580320 (45e3e0 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140319/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580256 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 4307032 (41b858 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140319/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4306968 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.035456] [<c04f3470>] (tegra_drm_load) from [<c04e1244>] (drm_dev_register+0xa8/0x104) [ 2.035471] [<c04e1244>] (drm_dev_register) from [<c04f3040>] (drm_host1x_init+0x30/0x8c) [ 2.035486] [<c04f3040>] (drm_host1x_init) from [<c050379c>] (host1x_subdev_register+0xb4/0xd0) [ 2.035501] [<c050379c>] (host1x_subdev_register) from [<c0503d48>] (host1x_client_register+0xf8/0x11c) [ 2.035516] [<c0503d48>] (host1x_client_register) from [<c04f74a0>] (tegra_dc_probe+0x154/0x290) [ 2.035534] [<c04f74a0>] (tegra_dc_probe) from [<c0511634>] (platform_drv_probe+0x18/0x48) [ 2.035550] [<c0511634>] (platform_drv_probe) from [<c050fe90>] (driver_probe_device+0x124/0x240) [ 2.035565] [<c050fe90>] (driver_probe_device) from [<c050e548>] (bus_for_each_drv+0x58/0x8c) [ 2.035579] [<c050e548>] (bus_for_each_drv) from [<c050fd3c>] (device_attach+0x74/0x88) [ 2.035593] [<c050fd3c>] (device_attach) from [<c050f3e4>] (bus_probe_device+0x84/0xa8) [ 2.035608] [<c050f3e4>] (bus_probe_device) from [<c050f820>] (deferred_probe_work_func+0x68/0x98) [ 2.035626] [<c050f820>] (deferred_probe_work_func) from [<c025a1a4>] (process_one_work+0x10c/0x37c) [ 2.035644] [<c025a1a4>] (process_one_work) from [<c025aec4>] (worker_thread+0x13c/0x404) [ 2.035662] [<c025aec4>] (worker_thread) from [<c02605c4>] (kthread+0xd8/0xf0) [ 2.035680] [<c02605c4>] (kthread) from [<c020e638>] (ret_from_fork+0x14/0x3c) [ 2.035686] ---[ end trace bc65aaa2d2555931 ]--- [ 5.032228] [sched_delayed] sched: RT throttling activated [ 5.034550] mmc0: new SDIO card at address 0001 [ 5.052555] Console: switching to colour frame buffer device 170x48 [ 5.078958] host1x drm: fb0: frame buffer device [ 5.083660] host1x drm: registered panic notifier [ 5.088368] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.097126] tegra-ehci c5000000.usb: EHCI Host Controller [ 5.102546] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 5.110444] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 5.142267] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.162248] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 5.168732] hub 3-0:1.0: USB hub found [ 5.172514] hub 3-0:1.0: 1 port detected [ 5.177246] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 5.184439] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-19 08:24:28 UTC (1395217468) [ 5.196372] ALSA device list: [ 5.199333] #0: NVIDIA Tegra Seaboard [ 5.207850] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 5.245957] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.254082] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 5.294903] devtmpfs: mounted [ 5.298400] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-_XV0Tv/tmpQnvpEy-uImage tftp 0x00100000 tmp/snowball-_XV0Tv/tmpQnvpEy-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-_XV0Tv/tmpQnvpEy-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4621569 (468501 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621505 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.417436] hub 2-0:1.0: 1 port detected [ 3.424834] tegra-ehci c5000000.usb: EHCI Host Controller [ 3.430249] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 3.437979] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 3.458819] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 3.465889] hub 3-0:1.0: USB hub found [ 3.470439] hub 3-0:1.0: 1 port detected [ 3.475853] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 3.483383] rtc-em3027 2-0056: setting system clock to 2014-03-19 08:24:27 UTC (1395217467) [ 3.497603] ALSA device list: [ 3.500574] #0: tegra-trimslice [ 3.504719] Waiting for root device /dev/sda1... [ 3.737303] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.890021] hub 2-1:1.0: USB hub found [ 3.894084] hub 2-1:1.0: 4 ports detected [ 4.067392] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 4.283058] usb-storage 3-1:1.0: USB Mass Storage device detected [ 4.290083] scsi0 : usb-storage 3-1:1.0 [ 4.387560] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 4.850639] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 6.180583] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 6.191467] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 6.200525] sd 0:0:0:0: [sda] Write Protect is off [ 6.206651] sd 0:0:0:0: [sda] No Caching mode page found [ 6.212066] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.222923] sd 0:0:0:0: [sda] No Caching mode page found [ 6.228341] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.236571] sda: sda1 [ 6.244425] sd 0:0:0:0: [sda] No Caching mode page found [ 6.249855] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.255977] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.262100] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 6.271564] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 6.309995] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.317828] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 6.339370] devtmpfs: mounted [ 6.343731] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 6.396030] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.374009] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.376061] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.388502] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.406038] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.411827] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.418896] mmc1: new SDIO card at address 0001 [ 1.424510] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.440926] devtmpfs: mounted [ 1.444341] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.476909] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.487464] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.490914] mmc2: new high speed SDHC card at address 0001 [ 1.499745] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.506886] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.513416] Internal error: : 1 [#2] SMP ARM [ 1.517688] Modules linked in: [ 1.520767] CPU: 0 PID: 29042 Comm: %s [ 1.520767] Not tainted 3.14.0-rc7-next-20140319 #1 [ 1.529564] task: c0990acc ti: ec846000 task.ti: 70737573 [ 1.534976] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.540036] LR is at __down_read_trylock+0x14/0x54 [ 1.544831] pc : [<c07ba868>] lr : [<c027d15c>] psr: 40000193 [ 1.544831] sp : ec847fd8 ip : c0ae2388 fp : ec8480c0 [ 1.556310] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.561537] r7 : c0990acc r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.568065] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.574599] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.581824] Control: 10c5387d Table: 3cd3404a DAC: 00000015 [ 1.587572] Process %s [ 1.587572] (pid: 29042, stack limit = 0x707377c3) [ 1.594886] Stack: (0xec847fd8 to 0x70739573) [ 1.599261] [<c07ba868>] (_raw_spin_lock_irqsave) from [<c027d15c>] (__down_read_trylock+0x14/0x54) [ 1.608327] [<c027d15c>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.616687] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.622786] ---[ end trace ef0f1f6556e398be ]--- [ 1.627410] Alignment trap: not handling instruction e1923f9f at [<c07ba864>] [ 1.634547] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.319240] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

← Newer
1
...
10
11
12
13
14
15
16
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014