Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

arm-soc boot: 36 pass, 6 fail (v3.14-rc5-1073-gaf2f9fb)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1073-gaf2f9fb Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.6 sec am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 1 min 1.3 sec legacy,3530beagle PASS: 0 min 41.2 sec omap4-panda PASS: 1 min 9.6 sec omap3-overo-tobi PASS: 0 min 23.9 sec am335x-bone PASS: 0 min 33.0 sec omap3-overo-storm-tobi PASS: 0 min 26.1 sec omap4-panda-es PASS: 1 min 6.8 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 23.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.2 sec sun4i-a10-cubieboard FAIL: 0 min 17.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 24.2 sec omap3-beagle-xm PASS: 0 min 52.8 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 53.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard FAIL: 0 min 19.7 sec bcm28155-ap PASS: 1 min 0.3 sec omap3-overo-tobi PASS: 0 min 22.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec am335x-bone PASS: 0 min 26.9 sec omap3-overo-storm-tobi PASS: 0 min 24.7 sec imx6q-wandboard PASS: 0 min 17.1 sec omap4-panda-es PASS: 0 min 52.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i#dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-IB9xPb/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-IB9xPb/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-IB9xPb/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4546192 (455e90 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-IB9xPb/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-IB9xPb/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-IB9xPb/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x455e90 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.96 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-7vYcMi/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-7vYcMi/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-7vYcMi/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-7vYcMi/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-7vYcMi/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-7vYcMi/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.22 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-wecKJm/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-wecKJm/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-wecKJm/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-wecKJm/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-wecKJm/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-wecKJm/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.86 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-Ol6mLD/tmpAFMNjd-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-Ol6mLD/tmpAFMNjd-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-Ol6mLD/tmpAFMNjd-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4563393 (45a1c1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4563329 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.40 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 2 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-b7EuFM/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-b7EuFM/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-b7EuFM/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.7 MiB/s done Bytes transferred = 4522080 (450060 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-b7EuFM/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-b7EuFM/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-b7EuFM/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x450060 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.71 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

arm-soc boot: 21 passed 6 failed (arm-soc/v3.14-rc5-1073-gaf2f9fb)

by Olof's autobooter

Failed boards: cubie sunxi_defconfig : FAILED 1:02.86 cubie multi_v7_defconfig : FAILED 1:07.58 cubie2 sunxi_defconfig : FAILED 1:00.79 cubie2 multi_v7_defconfig : FAILED 1:01.96 cubie2 multi_lpae_defconfig : FAILED 0:59.50 snowball multi_v7_defconfig : FAILED 1:09.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.76 arndale exynos_defconfig : passed 1:07.05 bbb omap2plus_defconfig : passed 1:36.44 bbb multi_v7_defconfig : passed 1:24.64 beaver tegra_defconfig : passed 0:57.16 beaver multi_v7_defconfig : passed 0:52.58 capri bcm_defconfig : passed 0:42.91 capri multi_v7_defconfig : passed 0:45.89 omap5uevm multi_v7_defconfig : warnings 1:39.18 omap5uevm multi_lpae_defconfig : warnings 1:34.83 panda omap2plus_defconfig : passed 1:19.68 panda multi_v7_defconfig : passed 2:10.04 sama5 sama5_defconfig : passed 1:57.88 seaboard tegra_defconfig : passed 1:02.01 seaboard multi_v7_defconfig : passed 1:11.17 snow exynos_defconfig : passed 1:23.99 snowball u8500_defconfig : passed 2:15.10 trimslice tegra_defconfig : passed 1:01.93 trimslice multi_v7_defconfig : passed 1:03.80 wandboard imx_v6_v7_defconfig : passed 0:55.59 wandboard multi_v7_defconfig : passed 1:05.90 Offline boards: dalmore tegra_defconfig : OFFLINE 1:05.09 dalmore multi_v7_defconfig : OFFLINE 1:03.70 dalmore multi_lpae_defconfig : OFFLINE 1:03.71 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.75 hummingboard multi_v7_defconfig : OFFLINE 1:03.71 omap5uevm omap2plus_defconfig : OFFLINE 2:27.41 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.7 MiB/s done Bytes transferred = 4522080 (450060 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtbnode: cubie status: on Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 871.1 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x450060 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 462.9 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 3.9 MiB/s done Bytes transferred = 4546192 (455e90 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: cubie2 status: on sun7i#tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 573.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x455e90 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 3.9 MiB/s done Bytes transferred = 4522080 (450060 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 377.9 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x450060 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.156 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 4 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1073-gaf2f9fb/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 683.6 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-9X17nb/tmp1Dfh07-uImage tftp 0x00100000 tmp/snowball-9X17nb/tmp1Dfh07-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-9X17nb/tmp1Dfh07-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4563393 (45a1c1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4563329 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 3 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1073-gaf2f9fb)

by Olof's autobuilder

10 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc7-4-g9f8b483)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-4-g9f8b483 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.5 sec legacy,da850evm PASS: 0 min 14.7 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.1 sec am335x-boneblack PASS: 0 min 26.2 sec omap3-beagle-xm PASS: 0 min 59.6 sec legacy,3530beagle PASS: 0 min 57.0 sec omap4-panda PASS: 1 min 5.3 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.2 sec omap5-uevm PASS: 0 min 58.4 sec omap4-panda-es PASS: 1 min 9.7 sec legacy,3730storm PASS: 0 min 21.0 sec legacy,3530overo PASS: 0 min 21.8 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.4 sec sun4i-a10-cubieboard PASS: 0 min 13.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.2 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 54.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 55.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.4 sec bcm28155-ap PASS: 1 min 4.0 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 21.6 sec omap5-uevm PASS: 1 min 51.9 sec imx6q-wandboard PASS: 0 min 18.4 sec omap4-panda-es PASS: 0 min 53.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

mainline boot: 28 passed 0 failed (mainline/v3.14-rc7-4-g9f8b483)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.65 arndale exynos_defconfig : passed 1:08.24 bbb omap2plus_defconfig : passed 1:37.02 bbb multi_v7_defconfig : passed 1:25.33 beaver tegra_defconfig : passed 0:54.55 beaver multi_v7_defconfig : passed 0:49.88 capri bcm_defconfig : passed 0:43.37 capri multi_v7_defconfig : passed 0:46.69 cubie sunxi_defconfig : passed 1:02.97 cubie multi_v7_defconfig : passed 1:00.20 cubie2 sunxi_defconfig : passed 0:56.81 cubie2 multi_v7_defconfig : passed 0:58.73 cubie2 multi_lpae_defconfig : passed 0:57.84 cubox dove_defconfig : passed 1:00.08 omap5uevm multi_v7_defconfig : warnings 1:39.36 omap5uevm multi_lpae_defconfig : warnings 1:36.32 panda omap2plus_defconfig : passed 1:13.16 panda multi_v7_defconfig : passed 1:22.13 sama5 sama5_defconfig : passed 1:47.88 seaboard tegra_defconfig : passed 1:03.00 seaboard multi_v7_defconfig : passed 1:09.82 snow exynos_defconfig : passed 1:24.07 snowball u8500_defconfig : passed 1:33.04 snowball multi_v7_defconfig : passed 2:08.20 trimslice tegra_defconfig : passed 0:57.16 trimslice multi_v7_defconfig : passed 1:07.15 wandboard imx_v6_v7_defconfig : passed 0:55.98 wandboard multi_v7_defconfig : passed 1:01.27 Offline boards: dalmore tegra_defconfig : OFFLINE 1:04.69 dalmore multi_v7_defconfig : OFFLINE 1:03.82 dalmore multi_lpae_defconfig : OFFLINE 1:03.71 hummingboard imx_v6_v7_defconfig : OFFLINE 1:05.34 hummingboard multi_v7_defconfig : OFFLINE 1:03.83 omap5uevm omap2plus_defconfig : OFFLINE 2:13.20 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc7-4-g9f8b483)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9f8b483 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc7-4-g9f8b483/ Runtime: 34m 37s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 3 months

arm-soc boot: 11 pass, 2 fail (v3.14-rc5-1072-g2201535)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1072-g2201535 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig Full Report =========== tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard PASS: 0 min 17.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec sun4i-a10-cubieboard FAIL: 0 min 21.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-TowzSf/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-TowzSf/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-TowzSf/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-TowzSf/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-TowzSf/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-TowzSf/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.15 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

arm-soc boot: 10 passed 2 failed (arm-soc/v3.14-rc5-1072-g2201535)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : BUILD FAILED bbb multi_v7_defconfig : BUILD FAILED beaver multi_v7_defconfig : BUILD FAILED capri multi_v7_defconfig : BUILD FAILED cubie sunxi_defconfig : FAILED 1:00.42 cubie multi_v7_defconfig : BUILD FAILED cubie2 sunxi_defconfig : FAILED 0:58.24 cubie2 multi_v7_defconfig : BUILD FAILED cubie2 multi_lpae_defconfig : BUILD FAILED dalmore multi_v7_defconfig : BUILD FAILED dalmore multi_lpae_defconfig : BUILD FAILED hummingboard multi_v7_defconfig : BUILD FAILED omap5uevm omap2plus_defconfig : BUILD FAILED omap5uevm multi_v7_defconfig : BUILD FAILED omap5uevm multi_lpae_defconfig : BUILD FAILED panda omap2plus_defconfig : BUILD FAILED panda multi_v7_defconfig : BUILD FAILED seaboard multi_v7_defconfig : BUILD FAILED snowball multi_v7_defconfig : BUILD FAILED trimslice multi_v7_defconfig : BUILD FAILED wandboard multi_v7_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:08.94 arndale exynos_defconfig : passed 1:00.96 beaver tegra_defconfig : passed 0:50.95 capri bcm_defconfig : passed 0:42.41 sama5 sama5_defconfig : passed 1:52.97 seaboard tegra_defconfig : passed 1:01.73 snow exynos_defconfig : passed 1:22.80 snowball u8500_defconfig : passed 1:18.39 trimslice tegra_defconfig : passed 0:58.90 wandboard imx_v6_v7_defconfig : passed 0:55.44 Offline boards: dalmore tegra_defconfig : OFFLINE 1:03.75 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.71 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.6 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 705.1 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 4 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1072-g2201535/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.9 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 3 months

arm-soc build: 7 warnings 3 failures (arm-soc/v3.14-rc5-1072-g2201535)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 2201535 arm-soc: document new merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1072-g2201535/ Runtime: 37m 7s Passed: 121 Failed: 3 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: multi_lpae_defconfig multi_v7_defconfig omap2plus_defconfig ------------------------------------------------------------------------------- Errors: multi_lpae_defconfig: arch/arm/mach-omap2/pdata-quirks.c:85:18: error: 'omap_device_assert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:86:20: error: 'omap_device_deassert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:199:4: error: implicit declaration of function 'rx51_secure_update_aux_cr' [-Werror=implicit-function-declaration] multi_v7_defconfig: arch/arm/mach-omap2/pdata-quirks.c:85:18: error: 'omap_device_assert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:86:20: error: 'omap_device_deassert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:199:4: error: implicit declaration of function 'rx51_secure_update_aux_cr' [-Werror=implicit-function-declaration] omap2plus_defconfig: arch/arm/mach-omap2/pdata-quirks.c:85:18: error: 'omap_device_assert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:86:20: error: 'omap_device_deassert_hardreset' undeclared here (not in a function) arch/arm/mach-omap2/pdata-quirks.c:199:4: error: implicit declaration of function 'rx51_secure_update_aux_cr' [-Werror=implicit-function-declaration] Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.failed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.failed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 3 months

arm-soc boot: 11 pass, 2 fail (v3.14-rc5-1040-g652a8cf)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1040-g652a8cf Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig Full Report =========== tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.4 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec sun4i-a10-cubieboard FAIL: 0 min 18.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 9.3 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-YHasjF/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-YHasjF/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-YHasjF/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-YHasjF/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-YHasjF/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-YHasjF/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.01 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

← Newer
1
...
13
14
15
16
17
18
19
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014