Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1111-g0a3ce8b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 0a3ce8b arm-soc list new merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1111-g0a3ce8b/ Runtime: 36m 38s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 3 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1088-ge6f4128)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: e6f4128 Merge branch 'next/fixes-non-critical' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1088-ge6f4128/ Runtime: 36m 51s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 3 months

next boot: 20 pass, 24 fail (next-20140318)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140318 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.3 sec am335x-boneblack FAIL: 0 min 29.0 sec omap3-beagle-xm FAIL: 0 min 55.5 sec legacy,3530beagle PASS: 1 min 12.8 sec omap4-panda FAIL: 0 min 53.9 sec omap3-overo-tobi FAIL: 0 min 28.1 sec am335x-bone FAIL: 0 min 31.0 sec omap3-overo-storm-tobi FAIL: 0 min 29.3 sec omap5-uevm FAIL: 0 min 57.9 sec omap4-panda-es FAIL: 1 min 2.4 sec legacy,3730storm PASS: 0 min 20.1 sec legacy,3530overo PASS: 0 min 22.1 sec multi_lpae_defconfig -------------------- omap5-uevm FAIL: 0 min 59.5 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.0 sec sun4i-a10-cubieboard FAIL: 0 min 18.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 5.8 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 9.5 sec ste-snowball FAIL: 0 min 30.6 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack FAIL: 0 min 28.9 sec omap3-beagle-xm FAIL: 0 min 52.4 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda FAIL: 0 min 58.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 20.0 sec bcm28155-ap FAIL: 16 min 18.4 sec omap3-overo-tobi FAIL: 0 min 28.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone FAIL: 0 min 30.6 sec omap3-overo-storm-tobi FAIL: 0 min 26.3 sec omap5-uevm FAIL: 1 min 0.2 sec imx6q-wandboard PASS: 0 min 18.3 sec omap4-panda-es FAIL: 0 min 57.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.9 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-GNBffp/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-GNBffp/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-GNBffp/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-GNBffp/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-GNBffp/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-GNBffp/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot#bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.01 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- OMAP3 beagleboard.org #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-e_7Pet/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-e_7Pet/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-e_7Pet/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 376 KiB/s done Bytes transferred = 4306552 (41b678 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 104.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-e_7Pet/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T #### 8.8 KiB/s done Bytes transferred = 58597 (e4e5 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff624e4 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.46 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Panda # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-jkNrcl/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-jkNrcl/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-jkNrcl/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 601.6 KiB/s done Bytes transferred = 4306552 (41b678 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 107.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-jkNrcl/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-jkNrcl/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-jkNrcl/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *T #### 9.8 KiB/s done Bytes transferred = 51803 (ca5b hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fa5a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.92 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-WkZiKU/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-WkZiKU/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-WkZiKU/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306552 (41b678 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-WkZiKU/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.2 MiB/s done Bytes transferred = 61262 (ef4e hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62f4d ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.05 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-8yEmdK/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-8yEmdK/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-8yEmdK/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-8yEmdK/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-8yEmdK/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-8yEmdK/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28886 (70d6 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a0d5 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.96 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-QV62GJ/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-QV62GJ/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-QV62GJ/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306552 (41b678 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-QV62GJ/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 62106 (f29a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff299 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.26 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/075 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-pT79kB/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-pT79kB/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-pT79kB/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 482.4 KiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 77.1 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-pT79kB/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-pT79kB/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-pT79kB/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T #### 7.8 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x41b678 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8df53 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.89 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${initenv}; then run initenv; fi Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pV4tp4/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-pV4tp4/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-pV4tp4/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 489.3 KiB/s done Bytes transferred = 4306552 (41b678 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 102.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-pV4tp4/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 4.9 KiB/s done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 62.35 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/075 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-j5r5GC/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-j5r5GC/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-j5r5GC/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 600.6 KiB/s done Bytes transferred = 4607096 (464c78 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-j5r5GC/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-j5r5GC/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-j5r5GC/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T #### 3.9 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x464c78 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8df53 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.47 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-tNHSvx/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-tNHSvx/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-tNHSvx/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4607096 (464c78 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-tNHSvx/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464c78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.01 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-Ig9ylH/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-Ig9ylH/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Ig9ylH/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Ig9ylH/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.00 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.160 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-yJnMtq/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-yJnMtq/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-yJnMtq/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-yJnMtq/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.95 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-4vt4aQ/tmpbBObQf-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-4vt4aQ/tmpbBObQf-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-4vt4aQ/tmpbBObQf-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4623033 (468ab9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4622969 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.61 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot#setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-_c862l/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-_c862l/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-_c862l/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-_c862l/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-_c862l/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-_c862l/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1 MiB/s done Bytes transferred = 29482 (732a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.92 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-JASVaz/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-JASVaz/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-JASVaz/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 429.7 KiB/s done Bytes transferred = 4581720 (45e958 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-JASVaz/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-JASVaz/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-JASVaz/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 10.7 KiB/s done Bytes transferred = 58597 (e4e5 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff624e4 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.35 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-OZOzXI/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-OZOzXI/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-OZOzXI/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-OZOzXI/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.12 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda #dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-9DEFmS/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-9DEFmS/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-9DEFmS/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 494.1 KiB/s done Bytes transferred = 4581720 (45e958 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 85 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-9DEFmS/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-9DEFmS/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-9DEFmS/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 6.8 KiB/s done Bytes transferred = 51803 (ca5b hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fa5a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.73 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-E9CfVW/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-E9CfVW/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-E9CfVW/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-E9CfVW/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15180 (3b4c hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.01 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.060000] ---[ end trace 77aff4427192b898 ]--- [ 1.060000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae <LAVA_DISPATCHER>2014-03-18 10:15:56 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:16:26 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:16:56 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:17:26 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:17:56 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:18:27 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 10:18:57 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xac7702c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 23f9f at [<c07ba47c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae before (last 100 chars): 23f9f at [<c07ba47c>] [ 1.060000] Unhandled fault: alignment exception (0x001) at 0x20736eae after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 7812 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0xa5a360c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-03-18 10:18:57 AM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-03-18 10:18:59 AM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-03-18 10:29:01 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-03-18 10:29:01 AM INFO: CriticalError <LAVA_DISPATCHER>2014-03-18 10:29:01 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-18 10:29:02 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-03-18 10:29:02 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/f6f3b96ffe5242f6dac3b5a80eef2165… LBOOT: Result: FAIL LBOOT: Time: 978.40 seconds. omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-bJRySI/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-bJRySI/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-bJRySI/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.4 MiB/s done Bytes transferred = 4581720 (45e958 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-bJRySI/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-bJRySI/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-bJRySI/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.3 MiB/s done Bytes transferred = 61262 (ef4e hex) Overo #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62f4d ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.25 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-SQruA0/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-SQruA0/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-SQruA0/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-SQruA0/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-SQruA0/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-SQruA0/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28886 (70d6 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a0d5 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.64 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-H8BOVO/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-H8BOVO/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-H8BOVO/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.4 MiB/s done Bytes transferred = 4581720 (45e958 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-H8BOVO/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *##### 2.4 MiB/s done Bytes transferred = 62106 (f29a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffed000, end 8ffff299 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.33 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/075 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-21kOs9/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-21kOs9/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-21kOs9/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 443.4 KiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 82 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-21kOs9/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-21kOs9/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-21kOs9/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 4.9 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot#bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x45e958 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8df53 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 60.19 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${initenv}; then run initenv; fi Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-VKfF_Z/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-VKfF_Z/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-VKfF_Z/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 496.1 KiB/s done Bytes transferred = 4581720 (45e958 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 83 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-VKfF_Z/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 9.8 KiB/s done Bytes transferred = 52383 (cc9f hex) Panda #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.10 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next build: 100 warnings 9 failures (next/next-20140318)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 3bd688c Add linux-next specific files for 20140318 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140318/ Runtime: 43m 41s Passed: 115 Failed: 9 Warnings: 100 Section mismatches: 38 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig s3c6400_defconfig s5p64x0_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' s3c6400_defconfig: arch/arm/mach-s3c64xx/include/mach/pm-core.h:64:32: error: 'S3C2410_UCON' undeclared (first use in this function) arch/arm/mach-s3c64xx/include/mach/pm-core.h:65:24: error: 'S3C6400_UCON_CLKMASK' undeclared (first use in this function) arch/arm/mach-s3c64xx/include/mach/pm-core.h:73:16: error: 'S3C2410_UCON_TXILEVEL' undeclared (first use in this function) arch/arm/mach-s3c64xx/include/mach/pm-core.h:73:40: error: 'S3C2410_UCON_RXILEVEL' undeclared (first use in this function) arch/arm/mach-s3c64xx/include/mach/pm-core.h:87:18: error: 'S3C6400_UCON_UCLK0' undeclared (first use in this function) arch/arm/mach-s3c64xx/include/mach/pm-core.h:89:15: error: 'S3C6400_UCON_PCLK2' undeclared (first use in this function) s5p64x0_defconfig: arch/arm/mach-s5p64x0/include/mach/pm-core.h:57:32: error: 'S3C2410_UCON' undeclared (first use in this function) arch/arm/mach-s5p64x0/include/mach/pm-core.h:58:24: error: 'S3C6400_UCON_CLKMASK' undeclared (first use in this function) arch/arm/mach-s5p64x0/include/mach/pm-core.h:68:16: error: 'S3C2410_UCON_TXILEVEL' undeclared (first use in this function) arch/arm/mach-s5p64x0/include/mach/pm-core.h:68:40: error: 'S3C2410_UCON_RXILEVEL' undeclared (first use in this function) arch/arm/mach-s5p64x0/include/mach/pm-core.h:85:18: error: 'S3C6400_UCON_UCLK0' undeclared (first use in this function) arch/arm/mach-s5p64x0/include/mach/pm-core.h:87:11: error: 'S3C6400_UCON_PCLK2' undeclared (first use in this function) Warnings: 1 drivers/irqchip/irq-bcm2835.c:201:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-bcm2835.c:99:9: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-moxart.c:48:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 drivers/irqchip/irq-mmp.c:199:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-mmp.c:212:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sirfsoc.c:51:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:140:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:39:70: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-vt8500.c:183:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-armada-370-xp.c:415:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-orion.c:35:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 10 drivers/gpio/gpio-pl061.c:261:2: warning: initialization from incompatible pointer type [enabled by default] 10 drivers/gpio/gpio-pl061.c:261:2: warning: (near initialization for 'pl061_irqchip.irq_request_resources') [enabled by default] 13 drivers/irqchip/irq-vic.c:244:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 28 drivers/irqchip/irq-gic.c:283:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x5426c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x54330): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x543f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9bb6c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9bc30): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9bcf4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x53dec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x53eb0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x53f74): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b12c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b1f0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b2b4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x92a8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x936c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x9430): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x164): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x228): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x2ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a1b8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a27c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a340): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init()

10 years, 3 months

Tegra baseline test results for v3.14-rc7

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.14-rc7. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.14-rc7/20140317231219/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-a04, tegra30-beaver vmlinux object size (delta in bytes from test_v3.14-rc6 (fa389e220254c69ffae0d403eac4146171062d08)): text data bss total kernel -595 -128 0 -723 multi_v7_defconfig -523 -128 0 -651 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.14-rc6 (fa389e220254c69ffae0d403eac4146171062d08)) avail rsrvd high freed board kconfig dtb -8k 8k . . tegra114-dalmore-a04 multi_v7_defconfig tegra114-dalmore . . . . tegra114-dalmore-a04 tegra_defconfig tegra114-dalmore -8k 8k . . tegra30-beaver multi_v7_defconfig tegra30-beaver . . . . tegra30-beaver tegra_defconfig tegra30-beaver

10 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc7-23-g9a15c94)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-23-g9a15c94 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.8 sec legacy,da850evm PASS: 0 min 14.6 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 54.5 sec am335x-boneblack PASS: 0 min 26.2 sec omap3-beagle-xm PASS: 1 min 0.8 sec legacy,3530beagle PASS: 0 min 36.2 sec omap4-panda PASS: 1 min 13.8 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 22.1 sec omap5-uevm PASS: 1 min 6.1 sec omap4-panda-es PASS: 1 min 7.0 sec legacy,3730storm PASS: 0 min 23.9 sec legacy,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 51.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 15.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.2 sec sun4i-a10-cubieboard PASS: 0 min 15.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 50.9 sec sun7i-a20-cubieboard2 PASS: 0 min 15.0 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 56.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 14.6 sec bcm28155-ap PASS: 0 min 59.0 sec omap3-overo-tobi PASS: 0 min 22.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec am335x-bone PASS: 0 min 26.4 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 51.6 sec imx6q-wandboard PASS: 0 min 17.9 sec omap4-panda-es PASS: 0 min 57.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc7-23-g9a15c94)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 9a15c94 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc7-23-g9a15c94/ Runtime: 30m 57s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 3 months

arm-soc boot: 35 pass, 7 fail (v3.14-rc5-1080-ge61512a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1080-ge61512a Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.2 sec am335x-boneblack PASS: 0 min 26.1 sec omap3-beagle-xm PASS: 1 min 0.0 sec legacy,3530beagle PASS: 0 min 45.6 sec omap4-panda PASS: 1 min 10.1 sec omap3-overo-tobi PASS: 0 min 26.9 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.6 sec omap4-panda-es PASS: 1 min 9.3 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.7 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.1 sec sun4i-a10-cubieboard FAIL: 0 min 21.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.2 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 1.0 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 24.2 sec omap3-beagle-xm PASS: 0 min 49.9 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 57.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard FAIL: 0 min 19.9 sec bcm28155-ap FAIL: 16 min 13.8 sec omap3-overo-tobi PASS: 0 min 22.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.9 sec omap3-overo-storm-tobi PASS: 0 min 24.7 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es PASS: 1 min 2.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-h62zBa/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-h62zBa/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-h62zBa/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4564688 (45a6d0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-h62zBa/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-h62zBa/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-h62zBa/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a6d0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.18 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-9hndHV/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-9hndHV/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-9hndHV/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-9hndHV/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-9hndHV/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-9hndHV/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.07 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-jT9GZC/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-jT9GZC/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-jT9GZC/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-jT9GZC/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-jT9GZC/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-jT9GZC/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.25 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-YdZ79J/tmp8TH8rC-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-YdZ79J/tmp8TH8rC-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-YdZ79J/tmp8TH8rC-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580849 (45e5f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580785 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.51 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-MxSJ_q/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-MxSJ_q/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-MxSJ_q/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4539536 (454490 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-MxSJ_q/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-MxSJ_q/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-MxSJ_q/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.95 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM <LAVA_DISPATCHER>2014-03-17 09:46:16 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:46:46 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:47:16 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:47:46 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:48:16 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:48:46 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-17 09:49:16 PM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xa86308c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM before (last 100 chars): 0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 6932 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0xa19060c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-03-17 09:49:16 PM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-03-17 09:49:18 PM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-03-17 09:59:21 PM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-03-17 09:59:21 PM INFO: CriticalError <LAVA_DISPATCHER>2014-03-17 09:59:21 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-17 09:59:21 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-03-17 09:59:21 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/d36ddb26e8081422fd2028d99457e873… LBOOT: Result: FAIL LBOOT: Time: 973.80 seconds.

10 years, 3 months

arm-soc boot: 11 passed 16 failed (arm-soc/v3.14-rc5-1080-ge61512a)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:17.22 beaver multi_v7_defconfig : FAILED 0:28.67 capri multi_v7_defconfig : FAILED 2:58.66 cubie sunxi_defconfig : FAILED 1:00.68 cubie multi_v7_defconfig : FAILED 1:11.60 cubie2 sunxi_defconfig : FAILED 0:58.43 cubie2 multi_v7_defconfig : FAILED 1:04.60 cubie2 multi_lpae_defconfig : FAILED 1:02.95 omap5uevm multi_v7_defconfig : FAILED 3:49.70 omap5uevm multi_lpae_defconfig : FAILED 1:21.91 panda multi_v7_defconfig : FAILED 3:14.23 seaboard multi_v7_defconfig : FAILED 3:01.50 snow exynos_defconfig : FAILED 1:31.33 snowball multi_v7_defconfig : FAILED 1:10.18 trimslice multi_v7_defconfig : FAILED 0:38.49 wandboard multi_v7_defconfig : FAILED 3:06.39 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.29 arndale exynos_defconfig : passed 1:01.74 bbb omap2plus_defconfig : passed 1:31.73 beaver tegra_defconfig : passed 0:52.70 capri bcm_defconfig : passed 0:43.24 panda omap2plus_defconfig : passed 1:19.27 sama5 sama5_defconfig : passed 1:57.91 seaboard tegra_defconfig : passed 1:02.15 snowball u8500_defconfig : passed 1:25.16 trimslice tegra_defconfig : passed 1:04.89 wandboard imx_v6_v7_defconfig : passed 0:57.85 Offline boards: dalmore tegra_defconfig : OFFLINE 1:03.74 dalmore multi_v7_defconfig : OFFLINE 1:03.70 dalmore multi_lpae_defconfig : OFFLINE 1:03.70 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.70 hummingboard multi_v7_defconfig : OFFLINE 1:03.71 omap5uevm omap2plus_defconfig : OFFLINE 2:27.83 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.215937] sdhci: Secure Digital Host Controller Interface driver [ 1.222549] sdhci: Copyright(c) Pierre Ossman [ 1.228322] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.266869] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.306922] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.313923] usbcore: registered new interface driver usbhid [ 1.319859] usbhid: USB HID core driver [ 1.328961] TCP: cubic registered [ 1.332473] NET: Registered protocol family 17 [ 1.337570] Key type dns_resolver registered [ 1.342983] ThumbEE CPU extension supported. [ 1.347591] Registering SWP/SWPB emulation handler [ 1.352645] PJ4 iWMMXt coprocessor enabled. [ 1.364628] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.419542] mmc1: BKOPS_EN bit is not set [ 1.426231] mmc1: new high speed MMC card at address 0001 [ 1.432786] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.437959] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.444391] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.451391] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.458212] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.465551] libphy: 4a101000.mdio: probed [ 1.469902] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.479596] Detected MACID = bc:6a:29:7a:42:a8 [ 1.485797] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.494618] spear_cpufreq: Invalid cpufreq_tbl [ 1.504350] ALSA device list: [ 1.507761] No soundcards found. [ 1.512643] mmcblk0: p1 p2 [ 1.518562] mmcblk0boot1: unknown partition table [ 1.525448] mmcblk0boot0: unknown partition table [ 1.532747] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.542688] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.669883] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.678535] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.706437] devtmpfs: mounted [ 1.710535] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.785325] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.611441] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.619689] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.626632] CPU1: stopping [ 5.629332] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc5-01080-ge61512a #1 [ 5.637842] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.645570] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.652775] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.660153] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.667705] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.675166] Exception stack(0xec8bbf50 to 0xec8bbf98) [ 5.680202] bf40: ec8bbf98 00000003 484be260 00000001 [ 5.688359] bf60: e3503af0 00000000 ed7c5de8 c0b05728 00000001 00000000 c0b8000b ec8ba000 [ 5.696516] bf80: 00000015 ec8bbf98 c028d8f4 c065c314 60000113 ffffffff [ 5.703116] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.711013] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.719691] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.727677] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.735922] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.742865] CPU3: stopping [ 5.745564] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.14.0-rc5-01080-ge61512a #1 [ 5.754075] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.761803] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.769009] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.776386] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.783938] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.791400] Exception stack(0xec8bff50 to 0xec8bff98) [ 5.796436] ff40: ec8bff98 00000003 484bea30 00000001 [ 5.804594] ff60: e520c8b8 00000000 ed7d5de8 c0b05728 00000001 00000000 c0b8000b ec8be000 [ 5.812750] ff80: 00000015 ec8bff98 c028d8f4 c065c314 60000113 ffffffff [ 5.819349] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.827247] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.835926] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.843911] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.852155] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.859099] drm_kms_helper: panic occurred, switching back to text console [ 5.865993] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.874062] pgd = c0204000 [ 5.876756] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.690000] mmc0: no vqmmc regulator found [ 0.690000] mmc0: no vmmc regulator found [ 0.750000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.750000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.780000] mmc1: no vqmmc regulator found [ 0.780000] mmc1: no vmmc regulator found [ 0.830000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 17 [ 0.850000] Key type dns_resolver registered [ 0.850000] ThumbEE CPU extension supported. [ 0.850000] Registering SWP/SWPB emulation handler [ 0.860000] PJ4 iWMMXt coprocessor enabled. [ 0.860000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] spear_cpufreq: No cpu node found [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.880000] Waiting for root device /dev/mmcblk0p8... [ 0.890000] mmc0: BKOPS_EN bit is not set [ 0.900000] mmc0: new high speed MMC card at address 0001 [ 0.910000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.910000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.920000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.920000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.930000] Alternate GPT is invalid, using primary GPT. [ 0.930000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.940000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-node: cubie status: on rc5-1080-ge61512a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4539536 (454490 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 301.8 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.4 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 643.6 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #############################node: cubie2 status: on ###################### 3.9 MiB/s done Bytes transferred = 4564688 (45a6d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 935.5 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a6d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 4 MiB/s done Bytes transferred = 4539536 (454490 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 467.8 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 node: cubie2 status: on bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 4 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 573.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 49.087540] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.095535] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.103255] Exception stack(0xec8a5e40 to 0xec8a5e88) [ 49.108524] 5e40: 40000193 00000000 7466615c 40000193 74666158 7466615c 00000205 c098959c [ 49.117064] 5e60: 7466615c 74666158 00000028 ec8a5f70 ec8a5f70 ec8a5e88 c027e1c8 c07b3ebc [ 49.125595] 5e80: 40000193 ffffffff [ 49.129240] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.137871] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.147323] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.156036] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.164039] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.171744] Exception stack(0xec8a5f70 to 0xec8a5fb8) [ 49.177018] 5f60: 40000193 00000000 7466615c 20000193 [ 49.185550] 5f80: 74666158 7466615c 00000207 c098959c 0000017c 74666158 00000028 ec8a60a0 [ 49.194083] 5fa0: c0ad83e0 ec8a5fb8 c027e1c8 c07b3ebc 40000193 ffffffff [ 49.200993] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.209623] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.219073] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.227784] Code: e1a02000 e10f0000 f10c0080 f592f000 (e1923f9f) [ 49.234150] ---[ end trace ab9bbe4c0782530f ]--- [ 49.238971] Kernel panic - not syncing: Fatal exception in interrupt [ 50.268458] SMP: failed to stop secondary CPUs [ 50.273095] CPU0: stopping [ 50.275914] CPU: 0 PID: -326491452 Comm: Tainted: G D W 3.14.0-rc5-01080-ge61512a #1 [ 50.284815] [<c0215d7c>] (unwind_backtrace) from [<c0211734>] (show_stack+0x10/0x14) [ 50.292909] [<c0211734>] (show_stack) from [<c07af3c8>] (dump_stack+0x84/0x94) [ 50.300454] [<c07af3c8>] (dump_stack) from [<c021460c>] (handle_IPI+0x148/0x174) [ 50.308165] [<c021460c>] (handle_IPI) from [<c0208920>] (gic_handle_irq+0x58/0x5c) [ 50.316070] [<c0208920>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 50.323880] Exception stack(0xec8a3ea8 to 0xec8a3ef0) [ 50.329151] 3ea0: c0b8fc40 00000000 00000002 00000000 c0b8d130 ec8a4090 [ 50.337688] 3ec0: ec8a2000 00000000 00000000 c0b8d130 c07b3ec0 c0b8ae04 00000000 ec8a3ef0 [ 50.346225] 3ee0: c0281ccc c07ac488 60000113 ffffffff [ 50.351501] [<c0212280>] (__irq_svc) from [<c07ac488>] (panic+0x198/0x1f4) [ 50.358687] [<c07ac488>] (panic) from [<c0211988>] (die+0x250/0x418) [ 50.365321] [<c0211988>] (die) from [<c07abd74>] (__do_kernel_fault.part.10+0x64/0x74) [ 50.373597] [<c07abd74>] (__do_kernel_fault.part.10) from [<c0218228>] (do_page_fault+0x14c/0x27c) [ 50.382954] [<c0218228>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) ~$off # PYBOOT: Exception: panic ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.506412] smps10_out2: 5000 mV [ 47.510627] smps10_out1: 5000 mV [ 47.514467] ldo1: 1500 <--> 1800 mV [ 47.519053] ldo2: 2800 mV [ 47.522788] ldo3: 1500 mV [ 47.526259] ldo4: 1500 <--> 1800 mV [ 47.530885] ldo5: 1800 mV [ 47.534612] ldo6: 1200 mV [ 47.538296] ldo7: 2000 mV [ 47.542018] ldo8: 3000 mV [ 47.545594] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.551169] ldoln: 1800 mV [ 47.554984] ldousb: 3250 mV [ 47.558465] REGEN1: no parameters [ 47.562015] REGEN2: no parameters [ 47.565707] regen3: no parameters [ 47.569502] SYSEN1: no parameters [ 47.573055] SYSEN2: no parameters [ 47.816464] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.823527] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.829755] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.837693] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.876522] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.885145] spear_cpufreq: Invalid cpufreq_tbl [ 47.894395] ALSA device list: [ 47.897687] No soundcards found. [ 47.901696] Waiting for root device /dev/mmcblk1p2... [ 47.913036] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.923237] mmc2: new high speed SDHC card at address 0001 [ 47.929253] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.934735] mmcblk1: p1 p2 [ 48.016744] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.025635] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.049814] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.058287] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.073456] devtmpfs: mounted [ 48.076818] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 48.111607] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.674072] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.679565] VDAC: 1800 mV [ 1.679565] VANA: 2100 mV [ 1.686340] VCXIO: 1800 mV [ 1.689727] VUSB: 3300 mV [ 1.693298] V1V8: 1800 mV [ 1.696838] V2V1: 2100 mV [ 1.702850] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.827880] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.981658] hub 1-1:1.0: USB hub found [ 1.985687] hub 1-1:1.0: 5 ports detected [ 1.990264] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.270996] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.310729] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.411987] smsc95xx v1.0.4 [ 2.494323] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, c2:23:09:7a:2b:48 [ 2.609497] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.609497] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.624481] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.670288] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.717590] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.727996] mmc0: new high speed SDHC card at address b368 [ 2.734222] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.740325] mmcblk0: p1 p2 [ 2.883209] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.883209] spear_cpufreq: Invalid cpufreq_tbl [ 2.902038] ALSA device list: [ 2.905395] No soundcards found. [ 2.909027] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.919189] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.928741] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.944885] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.952301] mmc1: new SDIO card at address 0001 [ 2.957733] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.957733] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.984130] devtmpfs: mounted [ 2.984130] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 3.035614] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.819356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.825972] [drm] No driver support for vblank timestamp query. [ 1.832004] host1x drm: No connectors reported connected with modes [ 1.838276] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.845905] mmc0: new SDIO card at address 0001 [ 1.883997] Console: switching to colour frame buffer device 128x48 [ 1.914547] host1x drm: fb0: frame buffer device [ 1.919282] host1x drm: registered panic notifier [ 1.924001] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.933543] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.938991] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.947216] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.969186] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.975781] hub 1-0:1.0: USB hub found [ 1.979592] hub 1-0:1.0: 1 port detected [ 2.019293] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.024700] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 2 [ 2.032474] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.049197] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.055750] hub 2-0:1.0: USB hub found [ 2.059547] hub 2-0:1.0: 1 port detected [ 2.066707] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.072137] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 3 [ 2.079946] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.099174] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.105753] hub 3-0:1.0: USB hub found [ 2.109549] hub 3-0:1.0: 1 port detected [ 2.114413] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input4 [ 2.121687] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-17 20:12:06 UTC (1395087126) [ 2.130733] spear_cpufreq: Invalid cpufreq_tbl [ 2.138510] ALSA device list: [ 2.141675] #0: NVIDIA Tegra Seaboard [ 2.146872] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.182983] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.191104] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.230314] devtmpfs: mounted [ 2.233760] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 2.368132] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffff897 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,685,125 1,585,125 board_init_f 1,735,044 49,919 board_init_r 1,737,255 2,211 board_init 1,868,078 130,823 board_init_done 1,950,371 82,293 id=64 1,955,801 5,430 main_loop 3,891,230 1,935,429 usb_start 8,572,961 4,681,731 tftp_start 8,572,979 18 id=80 8,572,981 2 eth_start 12,407,135 3,834,154 id=81 12,407,219 84 id=82 12,407,224 5 id=84 12,407,226 2 tftp_done 40,652,116 28,244,890 bootm_start 40,652,124 8 id=1 40,732,161 80,037 id=2 40,732,180 19 id=3 41,514,365 782,185 id=4 41,514,366 1 id=5 41,514,379 13 id=6 42,237,430 723,051 id=7 42,237,433 3 id=8 42,237,448 15 id=15 42,806,543 569,095 start_kernel Accumulated time: 154,522 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-DWrTNW/tmpewILWu-uImage tftp 0x00100000 tmp/snowball-DWrTNW/tmpewILWu-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-DWrTNW/tmpewILWu-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580849 (45e5f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580785 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 6.174649] ---[ end trace 0c401ef24eaeb933 ]--- [ 6.179254] Kernel panic - not syncing: Attempted to kill the idle task! [ 6.185941] CPU1: stopping [ 6.188644] CPU: 1 PID: 14 Comm: kworker/1:0 Tainted: G D W 3.14.0-rc5-01080-ge61512a #1 [ 6.197427] Workqueue: events od_dbs_timer [ 6.201530] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 6.209264] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 6.216475] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 6.223857] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 6.231414] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 6.238877] Exception stack(0xed0b1ce0 to 0xed0b1d28) [ 6.243920] 1ce0: c0bb1088 20000113 c0aca8b0 00000003 ed0b1d44 00000000 00000001 c0214dc0 [ 6.252081] 1d00: 00000002 ed0b1ddc 00000002 edfdad50 00000001 ed0b1d28 c0214184 c029ae14 [ 6.260238] 1d20: 20000113 ffffffff [ 6.263734] [<c0212280>] (__irq_svc) from [<c029ae14>] (generic_exec_single+0x5c/0x84) [ 6.271639] [<c029ae14>] (generic_exec_single) from [<c029af48>] (smp_call_function_single+0x10c/0x198) [ 6.281017] [<c029af48>] (smp_call_function_single) from [<c029b3d4>] (on_each_cpu+0x2c/0x48) [ 6.289527] [<c029b3d4>] (on_each_cpu) from [<c02150fc>] (twd_rate_change+0x28/0x30) [ 6.297259] [<c02150fc>] (twd_rate_change) from [<c026484c>] (notifier_call_chain+0x44/0x84) [ 6.305683] [<c026484c>] (notifier_call_chain) from [<c0264bd4>] (__srcu_notifier_call_chain+0x44/0x60) [ 6.315059] [<c0264bd4>] (__srcu_notifier_call_chain) from [<c0264c08>] (srcu_notifier_call_chain+0x18/0x20) [ 6.324877] [<c0264c08>] (srcu_notifier_call_chain) from [<c069b694>] (__clk_notify+0x70/0x78) [ 6.333475] [<c069b694>] (__clk_notify) from [<c069b730>] (__clk_recalc_rates+0x94/0x98) [ 6.341551] [<c069b730>] (__clk_recalc_rates) from [<c069b708>] (__clk_recalc_rates+0x6c/0x98) [ 6.350150] [<c069b708>] (__clk_recalc_rates) from [<c069cd64>] (clk_set_parent+0x154/0x18c) [ 6.358576] [<c069cd64>] (clk_set_parent) from [<c065bb60>] (tegra_update_cpu_speed.isra.0+0xa8/0x164) [ 6.367865] [<c065bb60>] (tegra_update_cpu_speed.isra.0) from [<c065bc54>] (tegra_target+0x38/0x58) [ 6.376898] [<c065bc54>] (tegra_target) from [<c0657028>] (__cpufreq_driver_target+0xf8/0x1ac) [ 6.385495] [<c0657028>] (__cpufreq_driver_target) from [<c065a910>] (dbs_check_cpu+0x184/0x18c) [ 6.394266] [<c065a910>] (dbs_check_cpu) from [<c0659e04>] (od_dbs_timer+0x78/0x134) [ 6.402006] [<c0659e04>] (od_dbs_timer) from [<c025a548>] (process_one_work+0x10c/0x378) [ 6.410084] [<c025a548>] (process_one_work) from [<c025b264>] (worker_thread+0x13c/0x404) [ 6.418254] [<c025b264>] (worker_thread) from [<c0260948>] (kthread+0xd4/0xec) [ 6.425464] [<c0260948>] (kthread) from [<c020e6b8>] (ret_from_fork+0x14/0x3c) [ 6.432670] drm_kms_helper: panic occurred, switching back to text console [ 6.439566] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 6.447637] pgd = c0204000 [ 6.450333] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.163264] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.173437] mmc1: no vqmmc regulator found [ 1.177555] mmc1: no vmmc regulator found [ 1.225427] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233085] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.242272] mmc2: no vqmmc regulator found [ 1.246389] mmc2: no vmmc regulator found [ 1.293187] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.295426] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.296266] usbcore: registered new interface driver usbhid [ 1.296268] usbhid: USB HID core driver [ 1.299607] TCP: cubic registered [ 1.299613] NET: Registered protocol family 17 [ 1.299789] Key type dns_resolver registered [ 1.330287] ThumbEE CPU extension supported. [ 1.334587] Registering SWP/SWPB emulation handler [ 1.336283] mmc0: new high speed SDHC card at address aaaa [ 1.336725] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.349343] PJ4 iWMMXt coprocessor enabled. [ 1.350638] mmcblk0: p1 p2 [ 1.357389] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.365698] spear_cpufreq: Invalid cpufreq_tbl [ 1.376829] ALSA device list: [ 1.380005] No soundcards found. [ 1.385114] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.393451] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.399700] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.407580] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.409638] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.432941] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.439489] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.446241] mmc1: new SDIO card at address 0001 [ 1.451108] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.466859] devtmpfs: mounted [ 1.470340] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.502888] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.516923] mmc2: new high speed SDHC card at address 0001 [ 1.523457] mmcblk1: mmc2:0001 00000 7.60 GiB ~$off # PYBOOT: Exception: timeout

10 years, 3 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.14-rc5-1080-ge61512a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: e61512a Merge branch 'next/soc' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.14-rc5-1080-ge61512a/ Runtime: 38m 52s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b60): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 3 months

← Newer
1
...
12
13
14
15
16
17
18
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014