Kernel-build-reports March 2014

kernel-build-reports@lists.linaro.org

15 participants
336 discussions

next build: 80 warnings 7 failures (next/next-20140319)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 86c990c Add linux-next specific files for 20140319 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140319/ Runtime: 43m 7s Passed: 117 Failed: 7 Warnings: 80 Section mismatches: 38 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 drivers/irqchip/irq-bcm2835.c:201:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-bcm2835.c:99:9: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/irqchip/irq-moxart.c:48:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 drivers/irqchip/irq-mmp.c:199:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-mmp.c:212:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sirfsoc.c:51:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:140:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-sun4i.c:39:70: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 3 drivers/irqchip/irq-vt8500.c:183:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-armada-370-xp.c:415:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 5 drivers/irqchip/irq-orion.c:35:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 13 drivers/irqchip/irq-vic.c:244:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 28 drivers/irqchip/irq-gic.c:283:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x547ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x548b0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x54974): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_lpae_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c0ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c1b0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x9c274): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x5436c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x54430): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x544f4): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbc94): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbd58): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/built-in.o(.data+0xbe1c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 multi_v7_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b6ac): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b770): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x9b834): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x92a8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x936c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/built-in.o(.data+0x9430): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x164): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x228): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/built-in.o(.data+0x2ec): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() 1 socfpga_defconfig WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a1b8): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a27c): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() 1 socfpga_defconfig WARNING: vmlinux.o(.data+0x1a340): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init()

10 years, 6 months

mainline boot: 48 pass, 0 fail (v3.14-rc7-26-g4907cdc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-26-g4907cdc Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec legacy,da850evm PASS: 0 min 14.9 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.5 sec am335x-boneblack PASS: 0 min 26.2 sec omap3-beagle-xm PASS: 1 min 0.3 sec legacy,3530beagle PASS: 0 min 46.5 sec omap4-panda PASS: 1 min 14.7 sec omap3-overo-tobi PASS: 0 min 23.8 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.4 sec omap5-uevm PASS: 1 min 1.2 sec omap4-panda-es PASS: 1 min 9.2 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 49.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.8 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec sun4i-a10-cubieboard PASS: 0 min 13.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.6 sec tegra30-beaver PASS: 0 min 19.8 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 50.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 53.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 17.5 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 49.7 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es PASS: 0 min 51.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 6 months

mainline boot: 31 passed 0 failed (mainline/v3.14-rc7-26-g4907cdc)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.84 arndale exynos_defconfig : passed 1:07.15 bbb omap2plus_defconfig : passed 1:37.96 bbb multi_v7_defconfig : passed 1:26.82 beaver tegra_defconfig : passed 0:52.67 beaver multi_v7_defconfig : passed 0:51.92 capri bcm_defconfig : passed 0:43.83 capri multi_v7_defconfig : passed 0:44.87 cubie sunxi_defconfig : passed 1:10.16 cubie multi_v7_defconfig : passed 1:07.32 cubie2 sunxi_defconfig : passed 0:53.61 cubie2 multi_v7_defconfig : passed 1:05.94 cubie2 multi_lpae_defconfig : passed 0:56.35 cubox dove_defconfig : passed 1:02.44 dalmore tegra_defconfig : passed 1:21.60 dalmore multi_v7_defconfig : passed 1:46.46 dalmore multi_lpae_defconfig : passed 1:15.71 omap5uevm multi_v7_defconfig : warnings 1:39.87 omap5uevm multi_lpae_defconfig : warnings 1:36.08 panda omap2plus_defconfig : passed 1:16.92 panda multi_v7_defconfig : passed 1:23.14 sama5 sama5_defconfig : passed 1:54.06 seaboard tegra_defconfig : passed 1:06.03 seaboard multi_v7_defconfig : passed 1:11.80 snow exynos_defconfig : passed 1:24.39 snowball u8500_defconfig : passed 2:29.81 snowball multi_v7_defconfig : passed 2:12.66 trimslice tegra_defconfig : passed 1:00.44 trimslice multi_v7_defconfig : passed 1:07.86 wandboard imx_v6_v7_defconfig : passed 1:00.98 wandboard multi_v7_defconfig : passed 1:02.29 Offline boards: hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.74 hummingboard multi_v7_defconfig : OFFLINE 1:03.71 omap5uevm omap2plus_defconfig : OFFLINE 2:12.09 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc7-26-g4907cdc)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 4907cdc Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc7-26-g4907cdc/ Runtime: 32m 32s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 6 months

arm-soc boot: 35 pass, 7 fail (v3.14-rc5-1111-g0a3ce8b)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1111-g0a3ce8b Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.1 sec am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 1 min 0.4 sec legacy,3530beagle PASS: 0 min 46.5 sec omap4-panda PASS: 1 min 5.5 sec omap3-overo-tobi PASS: 0 min 27.1 sec am335x-bone PASS: 0 min 33.0 sec omap3-overo-storm-tobi PASS: 0 min 25.3 sec omap4-panda-es PASS: 1 min 10.5 sec legacy,3730storm PASS: 0 min 21.0 sec legacy,3530overo PASS: 0 min 21.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.6 sec sun4i-a10-cubieboard FAIL: 0 min 18.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 2 min 13.6 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 34.2 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 24.1 sec omap3-beagle-xm PASS: 0 min 50.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.8 sec armada-370-mirabox PASS: 0 min 23.0 sec omap4-panda PASS: 0 min 59.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard FAIL: 0 min 23.1 sec bcm28155-ap FAIL: 4 min 29.8 sec omap3-overo-tobi PASS: 0 min 22.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 26.8 sec omap3-overo-storm-tobi PASS: 0 min 23.9 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 57.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-2v_Q5j/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-2v_Q5j/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-2v_Q5j/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4565632 (45aa80 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-2v_Q5j/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-2v_Q5j/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-2v_Q5j/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45aa80 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.55 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-Pf8Zq8/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-Pf8Zq8/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Pf8Zq8/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-Pf8Zq8/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-Pf8Zq8/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-Pf8Zq8/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.65 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-NG2JcA/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-NG2JcA/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-NG2JcA/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-NG2JcA/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-NG2JcA/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-NG2JcA/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.02 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-RAKT5U/tmp6gbGjN-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-RAKT5U/tmp6gbGjN-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-RAKT5U/tmp6gbGjN-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4582337 (45ebc1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4582273 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.19 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-UInViK/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-UInViK/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-UInViK/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.8 MiB/s done Bytes transferred = 4541024 (454a60 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-UInViK/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-UInViK/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-UInViK/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454a60 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.78 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-OupJJQ/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-OupJJQ/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-OupJJQ/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.8 MiB/s done Bytes transferred = 4541024 (454a60 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-OupJJQ/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-OupJJQ/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-OupJJQ/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454a60 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.14 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.690000] mmc0: no vqmmc regulator found [ 0.690000] mmc0: no vmmc regulator found [ 0.750000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.750000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.780000] mmc1: no vqmmc regulator found [ 0.780000] mmc1: no vmmc regulator found [ 0.830000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 17 [ 0.850000] Key type dns_resolver registered [ 0.850000] ThumbEE CPU extension supported. [ 0.850000] Registering SWP/SWPB emulation handler [ 0.860000] PJ4 iWMMXt coprocessor enabled. [ 0.860000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] spear_cpufreq: No cpu node found [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.880000] Waiting for root device /dev/mmcblk0p8... [ 0.890000] mmc0: BKOPS_EN bit is not set [ 0.900000] mmc0: new high speed MMC card at address 0001 [ 0.910000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.910000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.920000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.920000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.930000] Alternate GPT is invalid, using primary GPT. [ 0.930000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.940000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM <LAVA_DISPATCHER>2014-03-18 06:16:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 06:16:56 PM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 118, in power_on self.config.boot_linaro_timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/target.py", line 161, in _wait_for_prompt wait_for_prompt(connection, prompt_pattern, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/utils.py", line 317, in wait_for_prompt connection.expect(prompt_pattern, timeout=partial_timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/utils.py", line 244, in expect return super(logging_spawn, self).expect(*args, **kw) File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1316, in expect return self.expect_list(compiled_pattern_list, timeout, searchwindowsize) File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1330, in expect_list return self.expect_loop(searcher_re(pattern_list), timeout, searchwindowsize) File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1383, in expect_loop c = self.read_nonblocking (self.maxread, timeout) File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 820, in read_nonblocking r,w,e = self.__select([self.child_fd], [], [], timeout) File "/srv/lava/.cache/eggs/pexpect-2.4-py2.7.egg/pexpect.py", line 1554, in __select return select.select (iwtd, owtd, ewtd, timeout) KeyboardInterrupt <LAVA_DISPATCHER>2014-03-18 06:16:56 PM INFO: CriticalError <LAVA_DISPATCHER>2014-03-18 06:16:56 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-18 06:16:56 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-03-18 06:16:56 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/62eb80538d77edb1e0e78ea7236c18b4… LBOOT: Result: FAIL LBOOT: Time: 269.80 seconds.

10 years, 6 months

arm-soc boot: 14 passed 17 failed (arm-soc/v3.14-rc5-1111-g0a3ce8b)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:08.79 beaver multi_v7_defconfig : FAILED 0:37.36 capri multi_v7_defconfig : FAILED 3:01.26 cubie sunxi_defconfig : FAILED 1:00.36 cubie multi_v7_defconfig : FAILED 1:05.24 cubie2 sunxi_defconfig : FAILED 1:28.99 cubie2 multi_v7_defconfig : FAILED 1:04.00 cubie2 multi_lpae_defconfig : FAILED 1:00.54 dalmore multi_v7_defconfig : FAILED 3:05.64 dalmore multi_lpae_defconfig : FAILED 3:01.56 omap5uevm multi_v7_defconfig : FAILED 3:51.82 omap5uevm multi_lpae_defconfig : FAILED 1:21.23 panda multi_v7_defconfig : FAILED 0:37.02 seaboard multi_v7_defconfig : FAILED 3:02.32 snowball multi_v7_defconfig : FAILED 1:13.89 trimslice multi_v7_defconfig : FAILED 3:14.54 wandboard multi_v7_defconfig : FAILED 2:58.13 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.12 arndale exynos_defconfig : passed 1:16.35 bbb omap2plus_defconfig : passed 1:31.50 beaver tegra_defconfig : passed 0:50.94 capri bcm_defconfig : passed 0:42.15 dalmore tegra_defconfig : passed 1:19.51 omap5uevm omap2plus_defconfig : warnings 1:05.56 panda omap2plus_defconfig : passed 1:15.99 sama5 sama5_defconfig : passed 1:52.69 seaboard tegra_defconfig : passed 0:59.44 snow exynos_defconfig : passed 1:30.84 snowball u8500_defconfig : passed 1:17.35 trimslice tegra_defconfig : passed 0:55.24 wandboard imx_v6_v7_defconfig : passed 0:57.16 Offline boards: hummingboard imx_v6_v7_defconfig : OFFLINE 1:04.33 hummingboard multi_v7_defconfig : OFFLINE 1:04.65 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.217747] sdhci: Secure Digital Host Controller Interface driver [ 1.224268] sdhci: Copyright(c) Pierre Ossman [ 1.230050] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.276446] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.316495] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.323524] usbcore: registered new interface driver usbhid [ 1.329448] usbhid: USB HID core driver [ 1.338569] TCP: cubic registered [ 1.342076] NET: Registered protocol family 17 [ 1.347172] Key type dns_resolver registered [ 1.352594] ThumbEE CPU extension supported. [ 1.357203] Registering SWP/SWPB emulation handler [ 1.362255] PJ4 iWMMXt coprocessor enabled. [ 1.374494] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.429160] mmc1: BKOPS_EN bit is not set [ 1.435843] mmc1: new high speed MMC card at address 0001 [ 1.442403] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.447569] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.453999] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.461014] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.467829] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.475175] libphy: 4a101000.mdio: probed [ 1.479517] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.489221] Detected MACID = bc:6a:29:7a:42:a8 [ 1.495387] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.504204] spear_cpufreq: Invalid cpufreq_tbl [ 1.513922] ALSA device list: [ 1.517332] No soundcards found. [ 1.522209] mmcblk0: p1 p2 [ 1.528127] mmcblk0boot1: unknown partition table [ 1.534998] mmcblk0boot0: unknown partition table [ 1.542302] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.552251] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.610423] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.619067] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.646784] devtmpfs: mounted [ 1.650882] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 1.729826] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.611838] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.620085] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.627029] CPU1: stopping [ 5.629728] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc5-01111-g0a3ce8b #1 [ 5.638239] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.645966] [<c0211724>] (show_stack) from [<c07a7eb0>] (dump_stack+0x84/0x94) [ 5.653171] [<c07a7eb0>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.660549] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.668100] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.675563] Exception stack(0xec8bbf50 to 0xec8bbf98) [ 5.680599] bf40: ec8bbf98 00000003 484e91e0 00000001 [ 5.688757] bf60: e352bb90 00000000 ed7c5de8 c0b07728 00000001 00000000 c0b8258b ec8ba000 [ 5.696913] bf80: 00000015 ec8bbf98 c028d8f4 c065c5dc 60000113 ffffffff [ 5.703512] [<c0212280>] (__irq_svc) from [<c065c5dc>] (cpuidle_enter_state+0x50/0xe0) [ 5.711411] [<c065c5dc>] (cpuidle_enter_state) from [<c065c738>] (cpuidle_idle_call+0xcc/0x168) [ 5.720089] [<c065c738>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.728075] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.736319] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.743261] CPU2: stopping [ 5.745961] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.14.0-rc5-01111-g0a3ce8b #1 [ 5.754472] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.762199] [<c0211724>] (show_stack) from [<c07a7eb0>] (dump_stack+0x84/0x94) [ 5.769404] [<c07a7eb0>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.776781] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.784332] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.791794] Exception stack(0xec8bdf50 to 0xec8bdf98) [ 5.796831] df40: ec8bdf98 00000003 484e95c8 00000001 [ 5.804989] df60: df6521f8 00000000 ed7cdde8 c0b07728 00000001 00000000 c0b8258b ec8bc000 [ 5.813145] df80: 00000015 ec8bdf98 c028d8f4 c065c5dc 60000113 ffffffff [ 5.819744] [<c0212280>] (__irq_svc) from [<c065c5dc>] (cpuidle_enter_state+0x50/0xe0) [ 5.827642] [<c065c5dc>] (cpuidle_enter_state) from [<c065c738>] (cpuidle_idle_call+0xcc/0x168) [ 5.836321] [<c065c738>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.844307] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.852552] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.859495] drm_kms_helper: panic occurred, switching back to text console [ 5.866388] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.874457] pgd = c0204000 [ 5.877151] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.690000] mmc0: no vqmmc regulator found [ 0.690000] mmc0: no vmmc regulator found [ 0.750000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.750000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.780000] mmc1: no vqmmc regulator found [ 0.780000] mmc1: no vmmc regulator found [ 0.830000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 17 [ 0.850000] Key type dns_resolver registered [ 0.850000] ThumbEE CPU extension supported. [ 0.850000] Registering SWP/SWPB emulation handler [ 0.860000] PJ4 iWMMXt coprocessor enabled. [ 0.860000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] spear_cpufreq: No cpu node found [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.880000] Waiting for root device /dev/mmcblk0p8... [ 0.890000] mmc0: BKOPS_EN bit is not set [ 0.900000] mmc0: new high speed MMC card at address 0001 [ 0.910000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.910000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.920000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.920000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.930000] Alternate GPT is invalid, using primary GPT. [ 0.930000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.940000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.8 MiB/s done Bytes transferred = 4541024 (454a60 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 672.9 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454a60 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.6 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 462.9 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.9 MiB/s done Bytes transferred = 4565632 (45aa80 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 256.8 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45aa80 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 3.8 MiB/s done Bytes transferred = 4541024 (454a60 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: cubie2 status: on sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454a60 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3node: cubie2 status: on sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 4 MiB/s done Bytes transferred = 1780304 (1b2a50 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1111-g0a3ce8b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 246.1 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a50 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.698088] TCP: cubic registered [ 2.701505] NET: Registered protocol family 17 [ 2.706573] Key type dns_resolver registered [ 2.712605] ThumbEE CPU extension supported. [ 2.716932] Registering SWP/SWPB emulation handler [ 2.721794] PJ4 iWMMXt coprocessor enabled. [ 2.732654] dvdd_ts: 1800 mV [ 2.736924] usb1_vbus: 5000 mV [ 2.740411] usb1_vbus: supplied by vdd-sys-5v0 [ 2.746343] usb2_vbus: 5000 mV [ 2.749664] usb2_vbus: supplied by vdd-sys-5v0 [ 2.755801] vdd_hdmi_5v0: 5000 mV [ 2.759397] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.768827] vdd_cam_1v8_reg: 1800 mV [ 2.788298] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.795041] [drm] No driver support for vblank timestamp query. [ 2.924193] Console: switching to colour frame buffer device 240x75 [ 3.008937] host1x drm: fb0: frame buffer device [ 3.013768] host1x drm: registered panic notifier [ 3.018549] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.026246] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.037608] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.043194] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.053771] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.070239] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.079784] hub 1-0:1.0: USB hub found [ 3.084012] hub 1-0:1.0: 1 port detected [ 3.092805] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.104598] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.113018] spear_cpufreq: Invalid cpufreq_tbl [ 3.151831] ALSA device list: [ 3.155022] #0: NVIDIA Tegra Dalmore [ 3.163064] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.173431] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.212467] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.220815] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.236535] devtmpfs: mounted [ 3.241199] Freeing unused kernel memory: 536K (c0a46000 - c0acc000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.694976] TCP: cubic registered [ 2.698390] NET: Registered protocol family 17 [ 2.703440] Key type dns_resolver registered [ 2.709426] ThumbEE CPU extension supported. [ 2.713752] Registering SWP/SWPB emulation handler [ 2.718612] PJ4 iWMMXt coprocessor enabled. [ 2.729520] dvdd_ts: 1800 mV [ 2.733763] usb1_vbus: 5000 mV [ 2.737066] usb1_vbus: supplied by vdd-sys-5v0 [ 2.742870] usb2_vbus: 5000 mV [ 2.746167] usb2_vbus: supplied by vdd-sys-5v0 [ 2.752402] vdd_hdmi_5v0: 5000 mV [ 2.755991] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.763869] vdd_cam_1v8_reg: 1800 mV [ 2.780495] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.787138] [drm] No driver support for vblank timestamp query. [ 2.916884] Console: switching to colour frame buffer device 240x75 [ 3.001663] host1x drm: fb0: frame buffer device [ 3.006422] host1x drm: registered panic notifier [ 3.011299] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.019076] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.030860] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.036376] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.047200] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.068085] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.077479] hub 1-0:1.0: USB hub found [ 3.081651] hub 1-0:1.0: 1 port detected [ 3.090509] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.101523] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.109939] spear_cpufreq: Invalid cpufreq_tbl [ 3.148455] ALSA device list: [ 3.151649] #0: NVIDIA Tegra Dalmore [ 3.161168] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.171391] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.210725] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.219033] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.234905] devtmpfs: mounted [ 3.239562] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 49.077472] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.085465] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.093178] Exception stack(0xec8a5e40 to 0xec8a5e88) [ 49.098449] 5e40: 40000193 00000000 7466615c 40000193 74666158 7466615c 00000205 c098a0ec [ 49.106995] 5e60: 7466615c 74666158 00000028 ec8a5f70 ec8a5f70 ec8a5e88 c027e1c8 c07b4184 [ 49.115530] 5e80: 40000193 ffffffff [ 49.119170] [<c0212218>] (__dabt_svc) from [<c07b4184>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.127801] [<c07b4184>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.137252] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.145972] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.153956] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.161676] Exception stack(0xec8a5f70 to 0xec8a5fb8) [ 49.166949] 5f60: 40000193 00000000 7466615c 20000193 [ 49.175480] 5f80: 74666158 7466615c 00000207 c098a0ec 0000017c 74666158 00000028 ec8a60a0 [ 49.184019] 5fa0: c0ad83e0 ec8a5fb8 c027e1c8 c07b4184 40000193 ffffffff [ 49.190933] [<c0212218>] (__dabt_svc) from [<c07b4184>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.199574] [<c07b4184>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.209025] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.217741] Code: e1a02000 e10f0000 f10c0080 f592f000 (e1923f9f) [ 49.224113] ---[ end trace 00f4f5e10ddba709 ]--- [ 49.228931] Kernel panic - not syncing: Fatal exception in interrupt [ 50.258499] SMP: failed to stop secondary CPUs [ 50.263133] CPU0: stopping [ 50.265953] CPU: 0 PID: -326491452 Comm: Tainted: G D W 3.14.0-rc5-01111-g0a3ce8b #1 [ 50.274848] [<c0215d7c>] (unwind_backtrace) from [<c0211734>] (show_stack+0x10/0x14) [ 50.282944] [<c0211734>] (show_stack) from [<c07af690>] (dump_stack+0x84/0x94) [ 50.290492] [<c07af690>] (dump_stack) from [<c021460c>] (handle_IPI+0x148/0x174) [ 50.298214] [<c021460c>] (handle_IPI) from [<c0208920>] (gic_handle_irq+0x58/0x5c) [ 50.306114] [<c0208920>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 50.313931] Exception stack(0xec8a3ea8 to 0xec8a3ef0) [ 50.319201] 3ea0: c0b901c0 00000000 00000002 00000000 c0b8d6b0 ec8a4090 [ 50.327739] 3ec0: ec8a2000 00000000 00000000 c0b8d6b0 c07b4188 c0b8b384 00000000 ec8a3ef0 [ 50.336261] 3ee0: c0281ccc c07ac750 60000113 ffffffff [ 50.341537] [<c0212280>] (__irq_svc) from [<c07ac750>] (panic+0x198/0x1f4) [ 50.348706] [<c07ac750>] (panic) from [<c0211988>] (die+0x250/0x418) [ 50.355341] [<c0211988>] (die) from [<c07ac03c>] (__do_kernel_fault.part.10+0x64/0x74) [ 50.363611] [<c07ac03c>] (__do_kernel_fault.part.10) from [<c0218228>] (do_page_fault+0x14c/0x27c) [ 50.372957] [<c0218228>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) ~$off # PYBOOT: Exception: panic ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.506666] smps10_out2: 5000 mV [ 47.510883] smps10_out1: 5000 mV [ 47.514715] ldo1: 1500 <--> 1800 mV [ 47.519318] ldo2: 2800 mV [ 47.523018] ldo3: 1500 mV [ 47.526449] ldo4: 1500 <--> 1800 mV [ 47.531096] ldo5: 1800 mV [ 47.534824] ldo6: 1200 mV [ 47.538511] ldo7: 2000 mV [ 47.542227] ldo8: 3000 mV [ 47.545804] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.551359] ldoln: 1800 mV [ 47.555171] ldousb: 3250 mV [ 47.558661] REGEN1: no parameters [ 47.562204] REGEN2: no parameters [ 47.565878] regen3: no parameters [ 47.569684] SYSEN1: no parameters [ 47.573232] SYSEN2: no parameters [ 47.816707] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.823779] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.829995] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.837936] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.876767] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.885393] spear_cpufreq: Invalid cpufreq_tbl [ 47.894565] ALSA device list: [ 47.897861] No soundcards found. [ 47.901871] Waiting for root device /dev/mmcblk1p2... [ 47.913282] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.923497] mmc2: new high speed SDHC card at address 0001 [ 47.929519] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.935011] mmcblk1: p1 p2 [ 48.016992] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.025883] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.050636] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.059121] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.074289] devtmpfs: mounted [ 48.077660] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 48.112805] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.257476] 5e20: c0b85c94 c0b85e94 c0b85280 c0511668 c0ac5e60 c0ac4000 00000100 c024fc68 [ 3.266052] 5e40: 00000000 c02965ac c0ac5e60 00200200 00000000 c0ac60c0 c0b85a94 c024fe60 [ 3.266052] 5e60: c0ac5e60 c0ac5e60 00000000 00000000 c0ac6084 00000100 c0ac4000 c0ac6080 [ 3.266052] 5e80: c0ac6080 00000001 40000001 c0249b60 b8301dec 00000000 b8301dec c0ac1380 [ 3.266052] 5ea0: 00000000 0000000a c0b85040 c0ac60c0 ffff8c06 c0ac4010 c07b284c 00200000 [ 3.266052] 5ec0: c04199a0 c0ac4028 0000001d 00000000 fa240100 00000000 00000000 c0b8258b [ 3.266052] 5ee0: c0ac4000 c0249f20 c0ac1c9c c020ef00 fa24010c c0acc8ac c0ac5f18 c02088c4 [ 3.317626] 5f00: c028d8f4 c065c5dc 60000153 ffffffff c0ac5f4c c0212280 c0ac5f60 00000002 [ 3.317626] 5f20: b8301dec 00000000 b8301dec 00000000 edfc2de8 c0ad3e84 00000000 00000000 [ 3.317626] 5f40: c0b8258b c0ac4000 00000010 c0ac5f60 c028d8f4 c065c5dc 60000153 ffffffff [ 3.317626] 5f60: b8301dec 00000000 c0bc0e9c c0acc450 edfc2de8 c0bc0e9c 00000000 c0ad3e84 [ 3.317626] 5f80: 00000000 c065c738 00000000 c0acc4cc c0ac4000 c0acc450 c0b8258b c07b2840 [ 3.360565] 5fa0: c0ac4000 c020f220 00000000 c0282aa0 000000e9 c0aa18f8 00000000 c0a3eb00 [ 3.377716] 5fc0: ffffffff ffffffff c0a3e578 00000000 00000000 c0aa18f8 00000000 10c5387d [ 3.377716] 5fe0: c0acc43c c0aa18f4 c0ad0098 8020406a 412fc09a 80208074 00000000 00000000 [ 3.394897] [<c07ac958>] (_raw_spin_lock) from [<c0259acc>] (__queue_work+0xc8/0x294) [ 3.394897] [<c0259acc>] (__queue_work) from [<c0259ce0>] (queue_work_on+0x48/0x54) [ 3.411163] [<c0259ce0>] (queue_work_on) from [<c05106d8>] (rpm_suspend+0x500/0x598) [ 3.419311] [<c05106d8>] (rpm_suspend) from [<c0511668>] (pm_suspend_timer_fn+0x5c/0x6c) [ 3.427825] [<c0511668>] (pm_suspend_timer_fn) from [<c024fc68>] (call_timer_fn.isra.33+0x24/0x88) [ 3.427825] [<c024fc68>] (call_timer_fn.isra.33) from [<c024fe60>] (run_timer_softirq+0x194/0x210) [ 3.427825] [<c024fe60>] (run_timer_softirq) from [<c0249b60>] (__do_softirq+0x110/0x24c) [ 3.427825] [<c0249b60>] (__do_softirq) from [<c0249f20>] (irq_exit+0xac/0xf4) [ 3.462799] [<c0249f20>] (irq_exit) from [<c020ef00>] (handle_IRQ+0x44/0x90) [ 3.462799] [<c020ef00>] (handle_IRQ) from [<c02088c4>] (gic_handle_irq+0x2c/0x5c) [ 3.478149] [<c02088c4>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 3.478149] Exception stack(0xc0ac5f18 to 0xc0ac5f60) [ 3.478149] 5f00: c0ac5f60 00000002 [ 3.478149] 5f20: b8301dec 00000000 b8301dec 00000000 edfc2de8 c0ad3e84 00000000 00000000 [ 3.478149] 5f40: c0b8258b c0ac4000 00000010 c0ac5f60 c028d8f4 c065c5dc 60000153 ffffffff [ 3.478149] [<c0212280>] (__irq_svc) from [<c065c5dc>] (cpuidle_enter_state+0x50/0xe0) [ 3.478149] [<c065c5dc>] (cpuidle_enter_state) from [<c065c738>] (cpuidle_idle_call+0xcc/0x168) [ 3.478149] [<c065c738>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 3.542968] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 3.542968] [<c0282aa0>] (cpu_startup_entry) from [<c0a3eb00>] (start_kernel+0x358/0x364) [ 3.542968] Code: e12fff1e e3a00000 e12fff1e f590f000 (e1903f9f) [ 3.542968] ---[ end trace 0b6344c94fa38ff3 ]--- [ 3.571502] Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.812446] vdd_1v2: 1200 mV [ 1.817391] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.824025] [drm] No driver support for vblank timestamp query. [ 1.829987] host1x drm: No connectors reported connected with modes [ 1.836245] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.863855] Console: switching to colour frame buffer device 128x48 [ 1.882600] host1x drm: fb0: frame buffer device [ 1.887297] host1x drm: registered panic notifier [ 1.892012] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.900985] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.906399] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.914280] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.939153] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.945895] hub 1-0:1.0: USB hub found [ 1.950903] hub 1-0:1.0: 1 port detected [ 1.995953] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.001376] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 2 [ 2.009148] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.029150] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.035710] hub 2-0:1.0: USB hub found [ 2.039506] hub 2-0:1.0: 1 port detected [ 2.046682] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.052114] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 3 [ 2.059941] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.079139] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.085702] hub 3-0:1.0: USB hub found [ 2.089497] hub 3-0:1.0: 1 port detected [ 2.094381] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input4 [ 2.101660] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-18 18:08:03 UTC (1395166083) [ 2.110706] spear_cpufreq: Invalid cpufreq_tbl [ 2.118438] ALSA device list: [ 2.121605] #0: NVIDIA Tegra Seaboard [ 2.126796] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.162915] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.171035] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.203667] devtmpfs: mounted [ 2.207114] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 2.386854] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-9BwMpr/tmpjlzP5e-uImage tftp 0x00100000 tmp/snowball-9BwMpr/tmpjlzP5e-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-9BwMpr/tmpjlzP5e-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4582337 (45ebc1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4582273 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 157.066019] [<c07a7eb0>] (dump_stack) from [<c03fbcb0>] (Ldiv0+0x8/0x10) [ 157.066033] [<c03fbcb0>] (Ldiv0) from [<c0273278>] (find_busiest_group+0x29c/0x874) [ 157.066045] [<c0273278>] (find_busiest_group) from [<c02739c0>] (load_balance+0x170/0x760) [ 157.066057] [<c02739c0>] (load_balance) from [<c0274104>] (rebalance_domains+0x154/0x284) [ 157.066213] [<c029b3d4>] (on_each_cpu) from [<c02150fc>] (twd_rate_change+0x28/0x30) [ 157.066224] [<c02150fc>] (twd_rate_change) from [<c026484c>] (notifier_call_chain+0x44/0x84) [ 157.066235] [<c026484c>] (notifier_call_chain) from [<c0264bd4>] (__srcu_notifier_call_chain+0x44/0x60) [ 157.066247] [<c0264bd4>] (__srcu_notifier_call_chain) from [<c0264c08>] (srcu_notifier_call_chain+0x18/0x20) [ 157.066261] [<c0264c08>] (srcu_notifier_call_chain) from [<c069b95c>] (__clk_notify+0x70/0x78) [ 157.066273] [<c069b95c>] (__clk_notify) from [<c069b9f8>] (__clk_recalc_rates+0x94/0x98) [ 157.066285] [<c069b9f8>] (__clk_recalc_rates) from [<c069b9d0>] (__clk_recalc_rates+0x6c/0x98) [ 157.066298] [<c069b9d0>] (__clk_recalc_rates) from [<c069d02c>] (clk_set_parent+0x154/0x18c) [ 157.066311] [<c069d02c>] (clk_set_parent) from [<c065be28>] (tegra_update_cpu_speed.isra.0+0xa8/0x164) [ 157.066322] [<c065be28>] (tegra_update_cpu_speed.isra.0) from [<c065bf1c>] (tegra_target+0x38/0x58) [ 157.066336] [<c065bf1c>] (tegra_target) from [<c06572f0>] (__cpufreq_driver_target+0xf8/0x1ac) [ 157.066348] [<c06572f0>] (__cpufreq_driver_target) from [<c065abd8>] (dbs_check_cpu+0x184/0x18c) [ 157.066360] [<c065abd8>] (dbs_check_cpu) from [<c065a0cc>] (od_dbs_timer+0x78/0x134) [ 157.066376] [<c065a0cc>] (od_dbs_timer) from [<c025a548>] (process_one_work+0x10c/0x378) [ 157.066390] [<c025a548>] (process_one_work) from [<c025b264>] (worker_thread+0x13c/0x404) [ 157.066403] [<c025b264>] (worker_thread) from [<c0260948>] (kthread+0xd4/0xec) [ 157.066416] [<c0260948>] (kthread) from [<c020e6b8>] (ret_from_fork+0x14/0x3c) [ 157.265949] Division by zero in kernel. [ 157.265958] CPU: 1 PID: 30 Comm: kworker/1:1 Not tainted 3.14.0-rc5-01111-g0a3ce8b #1 [ 157.265970] Workqueue: events od_dbs_timer [ 157.265988] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 157.266004] [<c0211724>] (show_stack) from [<c07a7eb0>] (dump_stack+0x84/0x94) [ 157.266018] [<c07a7eb0>] (dump_stack) from [<c03fbcb0>] (Ldiv0+0x8/0x10) [ 157.266031] [<c03fbcb0>] (Ldiv0) from [<c0273278>] (find_busiest_group+0x29c/0x874) [ 157.266043] [<c0273278>] (find_busiest_group) from [<c02739c0>] (load_balance+0x170/0x760) [ 157.266210] [<c029b3d4>] (on_each_cpu) from [<c02150fc>] (twd_rate_change+0x28/0x30) [ 157.266222] [<c02150fc>] (twd_rate_change) from [<c026484c>] (notifier_call_chain+0x44/0x84) [ 157.266233] [<c026484c>] (notifier_call_chain) from [<c0264bd4>] (__srcu_notifier_call_chain+0x44/0x60) [ 157.266244] [<c0264bd4>] (__srcu_notifier_call_chain) from [<c0264c08>] (srcu_notifier_call_chain+0x18/0x20) [ 157.266258] [<c0264c08>] (srcu_notifier_call_chain) from [<c069b95c>] (__clk_notify+0x70/0x78) [ 157.266271] [<c069b95c>] (__clk_notify) from [<c069b9f8>] (__clk_recalc_rates+0x94/0x98) [ 157.266283] [<c069b9f8>] (__clk_recalc_rates) from [<c069b9d0>] (__clk_recalc_rates+0x6c/0x98) [ 157.266296] [<c069b9d0>] (__clk_recalc_rates) from [<c069d02c>] (clk_set_parent+0x154/0x18c) [ 157.266309] [<c069d02c>] (clk_set_parent) from [<c065be28>] (tegra_update_cpu_speed.isra.0+0xa8/0x164) [ 157.266320] [<c065be28>] (tegra_update_cpu_speed.isra.0) from [<c065bf1c>] (tegra_target+0x38/0x58)~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.101853] mmc0: no vqmmc regulator found [ 1.105961] mmc0: no vmmc regulator found [ 1.156715] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.164230] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.174407] mmc1: no vqmmc regulator found [ 1.178524] mmc1: no vmmc regulator found [ 1.226349] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.234003] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.243186] mmc2: no vqmmc regulator found [ 1.247303] mmc2: no vmmc regulator found [ 1.296350] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.304456] usbcore: registered new interface driver usbhid [ 1.310056] usbhid: USB HID core driver [ 1.314219] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.317350] TCP: cubic registered [ 1.317357] NET: Registered protocol family 17 [ 1.317528] Key type dns_resolver registered [ 1.334672] ThumbEE CPU extension supported. [ 1.338989] Registering SWP/SWPB emulation handler [ 1.340657] mmc0: new high speed SDHC card at address aaaa [ 1.341098] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.353748] PJ4 iWMMXt coprocessor enabled. [ 1.354944] mmcblk0: p1 p2 [ 1.361758] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.370058] spear_cpufreq: Invalid cpufreq_tbl [ 1.381026] ALSA device list: [ 1.384201] No soundcards found. [ 1.389350] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.397780] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.403441] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.411940] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.419586] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.435932] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.444088] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.455030] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.455382] devtmpfs: mounted [ 1.455882] Freeing unused kernel memory: 532K (c0a3e000 - c0ac3000) [ 1.477326] mmc1: new SDIO card at address 0001 ~$off # PYBOOT: Exception: timeout

10 years, 6 months

arm-soc boot: 14 passed 17 failed (arm-soc/v3.14-rc5-1088-ge6f4128)

by Olof's autobooter

Failed boards: bbb multi_v7_defconfig : FAILED 3:15.96 beaver multi_v7_defconfig : FAILED 0:32.66 capri multi_v7_defconfig : FAILED 2:59.29 cubie sunxi_defconfig : FAILED 1:01.79 cubie multi_v7_defconfig : FAILED 1:03.66 cubie2 sunxi_defconfig : FAILED 0:58.48 cubie2 multi_v7_defconfig : FAILED 0:59.44 cubie2 multi_lpae_defconfig : FAILED 0:59.26 dalmore multi_v7_defconfig : FAILED 3:03.85 dalmore multi_lpae_defconfig : FAILED 3:01.74 omap5uevm multi_v7_defconfig : FAILED 3:58.34 omap5uevm multi_lpae_defconfig : FAILED 1:21.83 panda multi_v7_defconfig : FAILED 3:07.87 seaboard multi_v7_defconfig : FAILED 3:02.28 snowball multi_v7_defconfig : FAILED 1:10.66 trimslice multi_v7_defconfig : FAILED 0:40.22 wandboard multi_v7_defconfig : FAILED 3:03.44 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.57 arndale exynos_defconfig : passed 1:01.46 bbb omap2plus_defconfig : passed 1:31.35 beaver tegra_defconfig : passed 0:50.03 capri bcm_defconfig : passed 0:42.65 dalmore tegra_defconfig : passed 1:17.95 omap5uevm omap2plus_defconfig : warnings 1:15.94 panda omap2plus_defconfig : passed 1:16.38 sama5 sama5_defconfig : passed 1:57.70 seaboard tegra_defconfig : passed 0:58.83 snow exynos_defconfig : passed 1:29.83 snowball u8500_defconfig : passed 1:22.22 trimslice tegra_defconfig : passed 0:54.59 wandboard imx_v6_v7_defconfig : passed 0:51.71 Offline boards: hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.74 hummingboard multi_v7_defconfig : OFFLINE 1:03.72 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.217052] sdhci: Secure Digital Host Controller Interface driver [ 1.223571] sdhci: Copyright(c) Pierre Ossman [ 1.229345] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.276861] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.316914] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.323923] usbcore: registered new interface driver usbhid [ 1.329852] usbhid: USB HID core driver [ 1.338944] TCP: cubic registered [ 1.342455] NET: Registered protocol family 17 [ 1.347559] Key type dns_resolver registered [ 1.352976] ThumbEE CPU extension supported. [ 1.357585] Registering SWP/SWPB emulation handler [ 1.362638] PJ4 iWMMXt coprocessor enabled. [ 1.374810] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.429569] mmc1: BKOPS_EN bit is not set [ 1.436263] mmc1: new high speed MMC card at address 0001 [ 1.442814] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.448001] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.454432] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.461460] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.468280] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.475614] libphy: 4a101000.mdio: probed [ 1.479959] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.489661] Detected MACID = bc:6a:29:7a:42:a8 [ 1.495848] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.504671] spear_cpufreq: Invalid cpufreq_tbl [ 1.514398] ALSA device list: [ 1.517812] No soundcards found. [ 1.522689] mmcblk0: p1 p2 [ 1.528600] mmcblk0boot1: unknown partition table [ 1.535491] mmcblk0boot0: unknown partition table [ 1.542805] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.552732] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.610986] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.619622] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.647212] devtmpfs: mounted [ 1.651306] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.730318] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 5.612624] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.620869] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.627813] CPU2: stopping [ 5.630512] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.14.0-rc5-01088-ge6f4128 #1 [ 5.639024] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.646751] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.653958] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.661335] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.668887] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.676349] Exception stack(0xec8bdf50 to 0xec8bdf98) [ 5.681386] df40: ec8bdf98 00000003 485e2a10 00000001 [ 5.689543] df60: e2619d00 00000000 ed7cdde8 c0b05728 00000001 00000000 c0b8000b ec8bc000 [ 5.697700] df80: 00000015 ec8bdf98 c028d8f4 c065c314 60000113 ffffffff [ 5.704298] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.712197] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.720875] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.728861] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.737106] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.744049] CPU1: stopping [ 5.746748] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc5-01088-ge6f4128 #1 [ 5.755259] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.762986] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.770191] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.777568] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.785119] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.792581] Exception stack(0xec8bbf50 to 0xec8bbf98) [ 5.797618] bf40: ec8bbf98 00000003 485e2628 00000001 [ 5.805775] bf60: e3b6bd20 00000000 ed7c5de8 c0b05728 00000001 00000000 c0b8000b ec8ba000 [ 5.813932] bf80: 00000015 ec8bbf98 c028d8f4 c065c314 60000113 ffffffff [ 5.820530] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.828429] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.837108] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.845094] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.853337] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.860281] drm_kms_helper: panic occurred, switching back to text console [ 5.867173] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.875241] pgd = c0204000 [ 5.877936] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.690000] mmc0: no vqmmc regulator found [ 0.690000] mmc0: no vmmc regulator found [ 0.750000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.750000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.780000] mmc1: no vqmmc regulator found [ 0.780000] mmc1: no vmmc regulator found [ 0.830000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 17 [ 0.850000] Key type dns_resolver registered [ 0.850000] ThumbEE CPU extension supported. [ 0.850000] Registering SWP/SWPB emulation handler [ 0.860000] PJ4 iWMMXt coprocessor enabled. [ 0.860000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] spear_cpufreq: No cpu node found [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.880000] Waiting for root device /dev/mmcblk0p8... [ 0.890000] mmc0: BKOPS_EN bit is not set [ 0.900000] mmc0: new high speed MMC card at address 0001 [ 0.910000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.910000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.920000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.920000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.930000] Alternate GPT is invalid, using primary GPT. [ 0.930000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.940000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *##############################################################node: cubie status: on ### ################################################################# ################################################################# ################################################################# ################################################## 2.8 MiB/s done Bytes transferred = 4539536 (454490 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 3.8 MiB/s done Bytes transferred = 4564688 (45a6d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arnode: cubie2 status: on m-soc/v3.14-rc5-1088-ge6f4128/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 845.7 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a6d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 3.9 MiB/s done Bytes transferred = 4539536 (454490 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 740.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 3.9 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1088-ge6f4128/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 573.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.697385] TCP: cubic registered [ 2.700799] NET: Registered protocol family 17 [ 2.705914] Key type dns_resolver registered [ 2.711924] ThumbEE CPU extension supported. [ 2.716248] Registering SWP/SWPB emulation handler [ 2.721109] PJ4 iWMMXt coprocessor enabled. [ 2.732121] dvdd_ts: 1800 mV [ 2.736377] usb1_vbus: 5000 mV [ 2.739694] usb1_vbus: supplied by vdd-sys-5v0 [ 2.745699] usb2_vbus: 5000 mV [ 2.749024] usb2_vbus: supplied by vdd-sys-5v0 [ 2.754956] vdd_hdmi_5v0: 5000 mV [ 2.758541] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.767979] vdd_cam_1v8_reg: 1800 mV [ 2.787431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.794173] [drm] No driver support for vblank timestamp query. [ 2.924012] Console: switching to colour frame buffer device 240x75 [ 3.009183] host1x drm: fb0: frame buffer device [ 3.014017] host1x drm: registered panic notifier [ 3.018799] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.026651] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.038303] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.043916] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.054783] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.080064] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.089421] hub 1-0:1.0: USB hub found [ 3.093633] hub 1-0:1.0: 1 port detected [ 3.102550] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.114313] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.122708] spear_cpufreq: Invalid cpufreq_tbl [ 3.161545] ALSA device list: [ 3.164734] #0: NVIDIA Tegra Dalmore [ 3.173230] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.183596] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.227215] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.235567] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.251242] devtmpfs: mounted [ 3.255805] Freeing unused kernel memory: 536K (c0a45000 - c0acb000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.691879] TCP: cubic registered [ 2.695234] NET: Registered protocol family 17 [ 2.700333] Key type dns_resolver registered [ 2.706321] ThumbEE CPU extension supported. [ 2.710646] Registering SWP/SWPB emulation handler [ 2.715503] PJ4 iWMMXt coprocessor enabled. [ 2.726446] dvdd_ts: 1800 mV [ 2.730680] usb1_vbus: 5000 mV [ 2.733985] usb1_vbus: supplied by vdd-sys-5v0 [ 2.739746] usb2_vbus: 5000 mV [ 2.743044] usb2_vbus: supplied by vdd-sys-5v0 [ 2.748827] vdd_hdmi_5v0: 5000 mV [ 2.752382] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.759327] vdd_cam_1v8_reg: 1800 mV [ 2.774832] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.781576] [drm] No driver support for vblank timestamp query. [ 2.911511] Console: switching to colour frame buffer device 240x75 [ 2.996261] host1x drm: fb0: frame buffer device [ 3.001018] host1x drm: registered panic notifier [ 3.005839] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.013350] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.024845] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.030469] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.041509] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.065479] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.074875] hub 1-0:1.0: USB hub found [ 3.079045] hub 1-0:1.0: 1 port detected [ 3.088027] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.099920] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.108304] spear_cpufreq: Invalid cpufreq_tbl [ 3.147179] ALSA device list: [ 3.150397] #0: NVIDIA Tegra Dalmore [ 3.158956] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.169151] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.212620] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.220983] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.236878] devtmpfs: mounted [ 3.241427] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 49.088221] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.096217] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.103938] Exception stack(0xec8a5e40 to 0xec8a5e88) [ 49.109211] 5e40: 40000193 00000000 7466615c 40000193 74666158 7466615c 00000205 c098959c [ 49.117744] 5e60: 7466615c 74666158 00000028 ec8a5f70 ec8a5f70 ec8a5e88 c027e1c8 c07b3ebc [ 49.126277] 5e80: 40000193 ffffffff [ 49.129918] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.138546] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.147985] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.156709] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.164709] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.172428] Exception stack(0xec8a5f70 to 0xec8a5fb8) [ 49.177706] 5f60: 40000193 00000000 7466615c 20000193 [ 49.186244] 5f80: 74666158 7466615c 00000207 c098959c 0000017c 74666158 00000028 ec8a60a0 [ 49.194785] 5fa0: c0ad83e0 ec8a5fb8 c027e1c8 c07b3ebc 40000193 ffffffff [ 49.201694] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.210329] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.219771] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.228490] Code: e1a02000 e10f0000 f10c0080 f592f000 (e1923f9f) [ 49.234858] ---[ end trace dc9578bc2afdbf0f ]--- [ 49.239672] Kernel panic - not syncing: Fatal exception in interrupt [ 50.269113] SMP: failed to stop secondary CPUs [ 50.273750] CPU0: stopping [ 50.276576] CPU: 0 PID: -326491452 Comm: Tainted: G D W 3.14.0-rc5-01088-ge6f4128 #1 [ 50.285489] [<c0215d7c>] (unwind_backtrace) from [<c0211734>] (show_stack+0x10/0x14) [ 50.293593] [<c0211734>] (show_stack) from [<c07af3c8>] (dump_stack+0x84/0x94) [ 50.301135] [<c07af3c8>] (dump_stack) from [<c021460c>] (handle_IPI+0x148/0x174) [ 50.308861] [<c021460c>] (handle_IPI) from [<c0208920>] (gic_handle_irq+0x58/0x5c) [ 50.316764] [<c0208920>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 50.324569] Exception stack(0xec8a3ea8 to 0xec8a3ef0) [ 50.329844] 3ea0: c0b8fc40 00000000 00000002 00000000 c0b8d130 ec8a4090 [ 50.338388] 3ec0: ec8a2000 00000000 00000000 c0b8d130 c07b3ec0 c0b8ae04 00000000 ec8a3ef0 [ 50.346921] 3ee0: c0281ccc c07ac488 60000113 ffffffff [ 50.352198] [<c0212280>] (__irq_svc) from [<c07ac488>] (panic+0x198/0x1f4) [ 50.359374] [<c07ac488>] (panic) from [<c0211988>] (die+0x250/0x418) [ 50.366005] [<c0211988>] (die) from [<c07abd74>] (__do_kernel_fault.part.10+0x64/0x74) [ 50.374277] [<c07abd74>] (__do_kernel_fault.part.10) from [<c0218228>] (do_page_fault+0x14c/0x27c) [ 50.383630] [<c0218228>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) ~$off # PYBOOT: Exception: panic ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516198] smps10_out2: 5000 mV [ 47.520416] smps10_out1: 5000 mV [ 47.524254] ldo1: 1500 <--> 1800 mV [ 47.528852] ldo2: 2800 mV [ 47.532565] ldo3: 1500 mV [ 47.536002] ldo4: 1500 <--> 1800 mV [ 47.540641] ldo5: 1800 mV [ 47.544360] ldo6: 1200 mV [ 47.548040] ldo7: 2000 mV [ 47.551766] ldo8: 3000 mV [ 47.555345] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.560892] ldoln: 1800 mV [ 47.564691] ldousb: 3250 mV [ 47.568182] REGEN1: no parameters [ 47.571729] REGEN2: no parameters [ 47.575421] regen3: no parameters [ 47.579222] SYSEN1: no parameters [ 47.582777] SYSEN2: no parameters [ 47.826312] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.833371] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.839588] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.847518] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.886374] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.895003] spear_cpufreq: Invalid cpufreq_tbl [ 47.904239] ALSA device list: [ 47.907529] No soundcards found. [ 47.911544] Waiting for root device /dev/mmcblk1p2... [ 47.922893] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.933092] mmc2: new high speed SDHC card at address 0001 [ 47.939106] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.944591] mmcblk1: p1 p2 [ 48.026565] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.035423] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.060734] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.069208] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.079535] devtmpfs: mounted [ 48.082907] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 48.119169] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.679626] VANA: 2100 mV [ 1.686859] VCXIO: 1800 mV [ 1.690246] VUSB: 3300 mV [ 1.693817] V1V8: 1800 mV [ 1.697357] V2V1: 2100 mV [ 1.703399] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.828491] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.980865] hub 1-1:1.0: USB hub found [ 1.984924] hub 1-1:1.0: 5 ports detected [ 2.031372] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.249359] gic_timer_retrigger: lost localtimer interrupt [ 2.299560] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.361114] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.419097] gic_timer_retrigger: lost localtimer interrupt [ 2.442382] smsc95xx v1.0.4 [ 2.503936] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fa:8e:d3:5a:50:f9 [ 2.679504] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.685852] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.694580] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.759582] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.797790] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.808166] mmc0: new high speed SDHC card at address b368 [ 2.814392] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.820495] mmcblk0: p1 p2 [ 2.985046] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.994018] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.002441] spear_cpufreq: Invalid cpufreq_tbl [ 3.013061] ALSA device list: [ 3.013122] No soundcards found. [ 3.021667] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.031433] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.039978] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.046813] mmc1: new SDIO card at address 0001 [ 3.065765] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.074249] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.090026] devtmpfs: mounted [ 3.090026] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 3.140167] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.818905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.825566] [drm] No driver support for vblank timestamp query. [ 1.831588] host1x drm: No connectors reported connected with modes [ 1.832487] mmc0: new SDIO card at address 0001 [ 1.842405] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.888142] Console: switching to colour frame buffer device 128x48 [ 1.918688] host1x drm: fb0: frame buffer device [ 1.923426] host1x drm: registered panic notifier [ 1.928146] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.937681] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.943168] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.952196] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.969142] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.975902] hub 1-0:1.0: USB hub found [ 1.979730] hub 1-0:1.0: 1 port detected [ 2.019253] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.024667] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 2 [ 2.032482] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.049162] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.055879] hub 2-0:1.0: USB hub found [ 2.059694] hub 2-0:1.0: 1 port detected [ 2.067036] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.072479] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 3 [ 2.080353] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.099133] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.105881] hub 3-0:1.0: USB hub found [ 2.109694] hub 3-0:1.0: 1 port detected [ 2.114766] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input4 [ 2.122124] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-18 17:54:35 UTC (1395165275) [ 2.131178] spear_cpufreq: Invalid cpufreq_tbl [ 2.139787] ALSA device list: [ 2.142930] #0: NVIDIA Tegra Seaboard [ 2.148296] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.184979] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.193112] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.232428] devtmpfs: mounted [ 2.235993] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 2.370549] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- node: snowball status: on *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x00100000 tmp/snowball-byos4V/tmpXWJtoz-uImage tftp 0x00100000 tmp/snowball-byos4V/tmpXWJtoz-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-byos4V/tmpXWJtoz-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580849 (45e5f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580785 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 6.171345] ---[ end trace eb7a26c13ce8d905 ]--- [ 6.175975] Kernel panic - not syncing: Attempted to kill the idle task! [ 6.182687] CPU1: stopping [ 6.185431] CPU: 1 PID: 14 Comm: kworker/1:0 Tainted: G D W 3.14.0-rc5-01088-ge6f4128 #1 [ 6.194263] Workqueue: events od_dbs_timer [ 6.198431] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 6.206219] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 6.213473] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 6.220890] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 6.228489] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 6.235977] Exception stack(0xed0b1ce0 to 0xed0b1d28) [ 6.241057] 1ce0: c0bb1088 20000113 c0aca8b0 00000003 ed0b1d44 00000000 00000001 c0214dc0 [ 6.249252] 1d00: 00000002 ed0b1ddc 00000002 edfdad50 00000001 ed0b1d28 c0214184 c029ae14 [ 6.257432] 1d20: 20000113 ffffffff [ 6.260978] [<c0212280>] (__irq_svc) from [<c029ae14>] (generic_exec_single+0x5c/0x84) [ 6.268930] [<c029ae14>] (generic_exec_single) from [<c029af48>] (smp_call_function_single+0x10c/0x198) [ 6.278353] [<c029af48>] (smp_call_function_single) from [<c029b3d4>] (on_each_cpu+0x2c/0x48) [ 6.286904] [<c029b3d4>] (on_each_cpu) from [<c02150fc>] (twd_rate_change+0x28/0x30) [ 6.294678] [<c02150fc>] (twd_rate_change) from [<c026484c>] (notifier_call_chain+0x44/0x84) [ 6.303141] [<c026484c>] (notifier_call_chain) from [<c0264bd4>] (__srcu_notifier_call_chain+0x44/0x60) [ 6.312558] [<c0264bd4>] (__srcu_notifier_call_chain) from [<c0264c08>] (srcu_notifier_call_chain+0x18/0x20) [ 6.322422] [<c0264c08>] (srcu_notifier_call_chain) from [<c069b694>] (__clk_notify+0x70/0x78) [ 6.331063] [<c069b694>] (__clk_notify) from [<c069b730>] (__clk_recalc_rates+0x94/0x98) [ 6.339181] [<c069b730>] (__clk_recalc_rates) from [<c069b708>] (__clk_recalc_rates+0x6c/0x98) [ 6.347824] [<c069b708>] (__clk_recalc_rates) from [<c069cd64>] (clk_set_parent+0x154/0x18c) [ 6.356291] [<c069cd64>] (clk_set_parent) from [<c065bb2c>] (tegra_update_cpu_speed.isra.0+0x74/0x164) [ 6.365620] [<c065bb2c>] (tegra_update_cpu_speed.isra.0) from [<c065bc54>] (tegra_target+0x38/0x58) [ 6.374698] [<c065bc54>] (tegra_target) from [<c0657028>] (__cpufreq_driver_target+0xf8/0x1ac) [ 6.383338] [<c0657028>] (__cpufreq_driver_target) from [<c065a910>] (dbs_check_cpu+0x184/0x18c) [ 6.392149] [<c065a910>] (dbs_check_cpu) from [<c0659e04>] (od_dbs_timer+0x78/0x134) [ 6.399938] [<c0659e04>] (od_dbs_timer) from [<c025a548>] (process_one_work+0x10c/0x378) [ 6.408061] [<c025a548>] (process_one_work) from [<c025b264>] (worker_thread+0x13c/0x404) [ 6.416273] [<c025b264>] (worker_thread) from [<c0260948>] (kthread+0xd4/0xec) [ 6.423525] [<c0260948>] (kthread) from [<c020e6b8>] (ret_from_fork+0x14/0x3c) [ 6.430758] drm_kms_helper: panic occurred, switching back to text console [ 6.437770] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 6.445869] pgd = c0204000 [ 6.448586] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.105026] mmc0: no vmmc regulator found [ 1.155971] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.163476] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.173650] mmc1: no vqmmc regulator found [ 1.177772] mmc1: no vmmc regulator found [ 1.225518] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233195] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.242369] mmc2: no vqmmc regulator found [ 1.246486] mmc2: no vmmc regulator found [ 1.293260] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.295516] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.296347] usbcore: registered new interface driver usbhid [ 1.296349] usbhid: USB HID core driver [ 1.299712] TCP: cubic registered [ 1.299718] NET: Registered protocol family 17 [ 1.299894] Key type dns_resolver registered [ 1.330342] ThumbEE CPU extension supported. [ 1.334633] Registering SWP/SWPB emulation handler [ 1.336357] mmc0: new high speed SDHC card at address aaaa [ 1.344940] PJ4 iWMMXt coprocessor enabled. [ 1.345036] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.354769] mmcblk0: p1 p2 [ 1.354921] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.361896] spear_cpufreq: Invalid cpufreq_tbl [ 1.361897] ALSA device list: [ 1.361899] No soundcards found. [ 1.380629] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.391971] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.414194] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.420837] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.427916] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.429378] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.431426] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.449838] devtmpfs: mounted [ 1.453303] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.463322] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.476063] mmc1: new SDIO card at address 0001 node: wandboard status: on ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next boot: 9 passed 21 failed (next/next-20140318)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:09.10 bbb multi_v7_defconfig : FAILED 1:08.34 beaver tegra_defconfig : FAILED 2:57.81 beaver multi_v7_defconfig : FAILED 2:56.53 capri multi_v7_defconfig : FAILED 2:58.63 cubie sunxi_defconfig : FAILED 0:59.86 cubie multi_v7_defconfig : FAILED 1:07.70 cubie2 sunxi_defconfig : FAILED 0:57.74 cubie2 multi_v7_defconfig : FAILED 1:05.80 cubie2 multi_lpae_defconfig : FAILED 0:59.20 cubox dove_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:10.95 dalmore multi_lpae_defconfig : FAILED 1:04.65 omap5uevm omap2plus_defconfig : FAILED 1:31.16 omap5uevm multi_v7_defconfig : FAILED 1:10.03 omap5uevm multi_lpae_defconfig : FAILED 1:14.60 panda omap2plus_defconfig : FAILED 1:13.06 panda multi_v7_defconfig : FAILED 1:14.59 seaboard multi_v7_defconfig : FAILED 3:01.75 snowball multi_v7_defconfig : FAILED 1:11.02 trimslice multi_v7_defconfig : FAILED 3:05.41 wandboard multi_v7_defconfig : FAILED 3:05.43 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.90 arndale exynos_defconfig : passed 1:03.62 capri bcm_defconfig : warnings 0:42.28 sama5 sama5_defconfig : passed 1:49.22 seaboard tegra_defconfig : passed 0:58.56 snow exynos_defconfig : passed 1:30.80 snowball u8500_defconfig : passed 1:26.36 trimslice tegra_defconfig : passed 0:56.01 wandboard imx_v6_v7_defconfig : passed 1:02.64 Offline boards: dalmore tegra_defconfig : OFFLINE 1:03.97 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.77 hummingboard multi_v7_defconfig : OFFLINE 1:03.72 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# #########node: bbb status: on ######################################################## ################################################################# ##################################################### 1.2 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 586.9 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/omap2plus_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 543 KiB/s done Bytes transferred = 29482 (732a hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot#bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0a329 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.645310] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.653052] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.660133] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.665725] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.672082] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.682077] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.692350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.698978] [drm] No driver support for vblank timestamp query. [ 3.704930] host1x drm: No connectors reported connected with modes [ 3.711186] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.729703] Console: switching to colour frame buffer device 128x48 [ 3.741738] host1x drm: fb0: frame buffer device [ 3.746448] host1x drm: registered panic notifier [ 3.751145] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.757341] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.764724] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.776076] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.781475] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.789272] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.813051] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.819419] hub 1-0:1.0: USB hub found [ 3.823195] hub 1-0:1.0: 1 port detected [ 3.827524] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.832919] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.840722] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.863051] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.869337] hub 2-0:1.0: USB hub found [ 3.873112] hub 2-0:1.0: 1 port detected [ 3.880989] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.893795] ALSA device list: [ 3.896761] #0: NVIDIA Tegra Beaver [ 3.902933] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.911853] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.927935] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.936061] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.963071] devtmpfs: mounted [ 3.966468] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 4.017244] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- [ 5.368565] Control: 10c5387d Table: a950404a DAC: 00000015 [ 5.374296] Process ps (pid: 330, stack limit = 0xe9428240) [ 5.379854] Stack: (0xe9429e18 to 0xe942a000) [ 5.384199] 9e00: bec4c000 c00c1aac [ 5.392359] 9e20: e9428000 00000013 bec4c000 c00c31dc 00000013 bec4cf54 ea1ff1c0 c00bf524 [ 5.400520] 9e40: e9875680 00000024 c081ef90 c08a7780 c082a0a8 00000001 00000000 00000010 [ 5.408681] 9e60: e9428000 00000001 00000000 c0868d00 c0868d04 00000013 bec4cf54 e9e98000 [ 5.416839] 9e80: 00000000 e9405ac0 ea1ff1c0 00000013 00020248 c00bfa48 00000016 e9429eb4 [ 5.424999] 9ea0: e9429eb0 00000000 e9405af8 e9e98000 ea2fea90 00000000 ffffffff e9405ac0 [ 5.433161] 9ec0: e9e98000 ea1ff1c0 bec4cf54 00000013 00000000 00000013 00020248 c00bfbf0 [ 5.441322] 9ee0: 00000013 00000000 e9405ac0 e9e97690 e9e98000 00001000 ea1ff1c0 c00b2f28 [ 5.449483] 9f00: 00000000 ea1ff1c0 e9e97690 ea1ff1c0 e9e97690 e9e98000 e9429f80 00020000 [ 5.457644] 9f20: b6e05008 00000000 00020248 c01239b4 ea040f00 a0000013 e989f000 e9875680 [ 5.465804] 9f40: b6e05008 e9429f80 e9875680 00020000 b6e05008 c00d98a0 e9875688 00000006 [ 5.473963] 9f60: e9e97690 00000000 00000000 e9875680 e9875680 00020000 b6e05008 c00d9f44 [ 5.482124] 9f80: 00000000 00000000 c000e724 b6e05008 00020000 00000000 00000003 c000e724 [ 5.490285] 9fa0: e9428000 c000e5a0 b6e05008 00020000 00000006 b6e05008 00020000 bec4cb65 [ 5.498446] 9fc0: b6e05008 00020000 00000000 00000003 00020000 00000006 00000020 00020248 [ 5.506605] 9fe0: b6e05008 bec4cb40 b6f58621 b6ed1b0c 40000010 00000006 00000000 00000000 [ 5.514772] [<c00b9018>] (vmacache_find) from [<c00c1aac>] (find_vma+0x10/0x80) [ 5.522071] [<c00c1aac>] (find_vma) from [<c00c31dc>] (find_extend_vma+0x14/0x78) [ 5.529544] [<c00c31dc>] (find_extend_vma) from [<c00bf524>] (__get_user_pages.part.104+0xb0/0x49c) [ 5.538575] [<c00bf524>] (__get_user_pages.part.104) from [<c00bfa48>] (__access_remote_vm+0xb8/0x128) [ 5.547866] [<c00bfa48>] (__access_remote_vm) from [<c00bfbf0>] (access_process_vm+0x48/0x60) [ 5.556373] [<c00bfbf0>] (access_process_vm) from [<c00b2f28>] (get_cmdline+0x70/0xf0) [ 5.564278] [<c00b2f28>] (get_cmdline) from [<c01239b4>] (proc_info_read+0x98/0xdc) [ 5.571923] [<c01239b4>] (proc_info_read) from [<c00d98a0>] (vfs_read+0x90/0x138) [ 5.579394] [<c00d98a0>] (vfs_read) from [<c00d9f44>] (SyS_read+0x40/0x94) [ 5.586261] [<c00d9f44>] (SyS_read) from [<c000e5a0>] (ret_fast_syscall+0x0/0x30) [ 5.593729] Code: e1500002 1a000001 e1a00003 e8bd8010 (e7f001f2) [ 5.599811] ---[ end trace 0f3b8b1d5d40b31c ]--- [ 26.626913] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=2102 jiffies, g=4294967085, c=4294967084, q=215) [ 26.638651] INFO: Stall ended before state dump start [ 87.546960] random: nonblocking pool is initialized [ 89.676912] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=8407 jiffies, g=4294967085, c=4294967084, q=219) [ 89.688644] INFO: Stall ended before state dump start [ 152.726906] INFO: rcu_preempt detected stalls on CPUs/tasks: {} (detected by 3, t=14712 jiffies, g=4294967085, c=4294967084, q=219) [ 152.738724] INFO: Stall ended before state dump start ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.930000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.030000] Internal error: : 1 [#2] SMP ARM [ 1.030000] Modules linked in: [ 1.030000] CPU: 0 PID: 29042 Comm: %s [ 1.030000] Not tainted 3.14.0-rc7-next-20140318 #1 [ 1.030000] task: c0990074 ti: ed83a000 task.ti: 70737573 [ 1.030000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.030000] LR is at __down_read_trylock+0x14/0x54 [ 1.030000] pc : [<c07ba480>] lr : [<c027d150>] psr: 40000193 [ 1.030000] sp : ed83bed8 ip : c0ae2388 fp : ed83bfc0 [ 1.030000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.030000] r7 : c0990074 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.030000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.030000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.030000] Control: 10c5387d Table: bdbec04a DAC: 00000015 [ 1.030000] Process %s [ 1.030000] (pid: 29042, stack limit = 0x707377c3) [ 1.030000] Stack: (0xed83bed8 to 0x70739573) [ 1.030000] [<c07ba480>] (_raw_spin_lock_irqsave) from [<c027d150>] (__down_read_trylock+0x14/0x54) [ 1.030000] [<c027d150>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.030000] [<c0217d8c>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.030000] [<c02083d4>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 1.030000] Exception stack(0xed83bfc0 to 0xed83c008) [ 1.030000] bfc0: 0000017c 00000017 ed83c000 00000193 ed83c008 c0217d14 00000017 00000000 [ 1.030000] bfe0: 0000017c 00000000 ed85a000 ed83c0e0 c0ae2388 ed83c008 c02083d4 c0217d40 [ 1.030000] c000: 00000193 ffffffff [ 1.030000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.030000] ---[ end trace 46f1c11beaf6162c ]--- [ 1.030000] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.030000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140318/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtbnode: cubie status: on Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 617.2 KiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.4 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'next/next-20140318/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 449.2 KiB/s done Bytes transferred = 15180 (3b4c hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140318/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140318/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.8 MiB/s done Bytes transferred = 4607096 (464c78 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 683.6 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140318/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 4 MiB/s done Bytes transferred = 4581720 (45e958 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage tftp 0x40008000 next/next-20140318/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 3.4 MiB/s done Bytes transferred = 1800928 (1b7ae0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'next/next-20140318/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 740.2 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b7ae0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.8 MiB/s done Bytes transferred = 4607096 (464c78 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 977.5 KiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140318/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140318/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.8 MiB/s done Bytes transferred = 4581720 (45e958 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34067 (8513 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff512 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.3 MiB/s done Bytes transferred = 4607096 (464c78 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.4 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x464c78 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.3 MiB/s done Bytes transferred = 4581720 (45e958 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.6 MiB/s done Bytes transferred = 44884 (af54 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x45e958 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.3 MiB/s done Bytes transferred = 4306552 (41b678 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 894.5 KiB/s done Bytes transferred = 44884 (af54 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x41b678 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200df53 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4581784 (45e998 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140318/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4581720 Bytes = 4.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 4306616 (41b6b8 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140318/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *#### done Bytes transferred = 52383 (cc9f hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4306552 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f0fc9e Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.918596] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.924809] platform 54200000.dc: Driver tegra-dc requests probe deferral [ 1.933718] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.972068] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.977493] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.985298] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.001951] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.008763] hub 1-0:1.0: USB hub found [ 2.012608] hub 1-0:1.0: 1 port detected [ 2.020038] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.025481] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.033215] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.051945] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.058730] hub 2-0:1.0: USB hub found [ 2.062544] hub 2-0:1.0: 1 port detected [ 2.069255] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.075883] [drm] No driver support for vblank timestamp query. [ 2.143767] Console: switching to colour frame buffer device 170x48 [ 2.166789] host1x drm: fb0: frame buffer device [ 2.171487] host1x drm: registered panic notifier [ 2.176201] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.185210] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.190625] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.198640] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.221946] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.228780] hub 3-0:1.0: USB hub found [ 2.232600] hub 3-0:1.0: 1 port detected [ 2.237753] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.245119] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-18 17:45:02 UTC (1395164702) [ 2.258472] ALSA device list: [ 2.261439] #0: NVIDIA Tegra Seaboard [ 2.266862] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.303316] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.311430] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.344268] devtmpfs: mounted [ 2.347752] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) [ 2.381989] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.482233] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-6d12U7/tmpdsK3Mr-uImage tftp 0x00100000 tmp/snowball-6d12U7/tmpdsK3Mr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-6d12U7/tmpdsK3Mr-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4623033 (468ab9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4622969 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.703649] hub 2-0:1.0: USB hub found [ 1.707448] hub 2-0:1.0: 1 port detected [ 1.715420] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.720859] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.728704] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.746886] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.753632] hub 3-0:1.0: USB hub found [ 1.758060] hub 3-0:1.0: 1 port detected [ 1.763135] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 1.770518] rtc-em3027 2-0056: setting system clock to 2014-03-18 17:45:11 UTC (1395164711) [ 1.783185] ALSA device list: [ 1.786151] #0: tegra-trimslice [ 1.790151] Waiting for root device /dev/sda1... [ 2.026986] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.179117] hub 2-1:1.0: USB hub found [ 2.183091] hub 2-1:1.0: 4 ports detected [ 2.357042] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.572645] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.579688] scsi0 : usb-storage 3-1:1.0 [ 2.677220] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.140279] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.470311] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 4.481148] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.490353] sd 0:0:0:0: [sda] Write Protect is off [ 4.496477] sd 0:0:0:0: [sda] No Caching mode page found [ 4.501888] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.512747] sd 0:0:0:0: [sda] No Caching mode page found [ 4.518165] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.526394] sda: sda1 [ 4.534248] sd 0:0:0:0: [sda] No Caching mode page found [ 4.539677] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.545800] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.552007] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.561512] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.600334] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.608163] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.630040] devtmpfs: mounted [ 4.634405] Freeing unused kernel memory: 544K (c0a4e000 - c0ad6000) ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.543739] LR is at __down_read_trylock+0x14/0x54 [ 1.548534] pc : [<c07ba480>] lr : [<c027d150>] psr: 40000193 [ 1.548534] sp : ec847fd8 ip : c0ae2388 fp : ec8480c0 [ 1.560014] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.565241] r7 : c0990074 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.571769] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.578302] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.585526] Control: 10c5387d Table: 3cd1c04a DAC: 00000015 [ 1.591274] Process %s [ 1.591274] (pid: 29042, stack limit = 0x707377c3) [ 1.598587] Stack: (0xec847fd8 to 0x70739573) [ 1.602962] [<c07ba480>] (_raw_spin_lock_irqsave) from [<c027d150>] (__down_read_trylock+0x14/0x54) [ 1.612028] [<c027d150>] (__down_read_trylock) from [<c0217d8c>] (do_page_fault+0x78/0x27c) [ 1.620387] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.626487] ---[ end trace 58491b4514c59d22 ]--- [ 1.631109] Alignment trap: not handling instruction e1923f9f at [<c07ba47c>] [ 1.638248] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 60.318549] INFO: rcu_sched self-detected stall on CPU { 2} (t=5884 jiffies g=4294967008 c=4294967007 q=2) [ 60.328360] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.14.0-rc7-next-20140318 #1 [ 60.336912] [<c0215b8c>] (unwind_backtrace) from [<c0211710>] (show_stack+0x10/0x14) [ 60.344681] [<c0211710>] (show_stack) from [<c07b5710>] (dump_stack+0x88/0x98) [ 60.351923] [<c07b5710>] (dump_stack) from [<c028c9a4>] (rcu_check_callbacks+0x414/0x838) [ 60.360121] [<c028c9a4>] (rcu_check_callbacks) from [<c024fdb8>] (update_process_times+0x40/0x60) [ 60.369011] [<c024fdb8>] (update_process_times) from [<c02970e8>] (tick_sched_timer+0x4c/0x78) [ 60.377636] [<c02970e8>] (tick_sched_timer) from [<c0262fd4>] (__run_hrtimer.isra.33+0x54/0xe4) [ 60.386344] [<c0262fd4>] (__run_hrtimer.isra.33) from [<c02638ec>] (hrtimer_interrupt+0x11c/0x2d0) [ 60.395312] [<c02638ec>] (hrtimer_interrupt) from [<c0295738>] (tick_receive_broadcast+0x2c/0x44) [ 60.404195] [<c0295738>] (tick_receive_broadcast) from [<c0214314>] (handle_IPI+0xdc/0x174) [ 60.412555] [<c0214314>] (handle_IPI) from [<c020889c>] (gic_handle_irq+0x58/0x5c) [ 60.420137] [<c020889c>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 60.427622] Exception stack(0xec89df60 to 0xec89dfa8) [ 60.432681] df60: 00000000 c0ae3940 c0ae398c 0000004c f8481439 0000000d 0ac1b37c 0000000e [ 60.440863] df80: ed7c1de8 c0ad4de0 00000001 ec89c000 0000001b ec89dfa8 c0667b68 c0667b74 [ 60.449043] dfa0: 60000113 ffffffff [ 60.452558] [<c0212280>] (__irq_svc) from [<c0667b74>] (cpuidle_enter_state+0x68/0x100) [ 60.460584] [<c0667b74>] (cpuidle_enter_state) from [<c0278e0c>] (cpu_startup_entry+0x200/0x230) [ 60.469380] [<c0278e0c>] (cpu_startup_entry) from [<102089e4>] (0x102089e4) [ 60.476700] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline boot: 26 passed 1 failed (mainline/v3.14-rc7-23-g9a15c94)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:35.37 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.01 arndale exynos_defconfig : passed 1:07.48 bbb omap2plus_defconfig : passed 1:37.83 bbb multi_v7_defconfig : passed 1:27.30 beaver tegra_defconfig : passed 0:52.97 beaver multi_v7_defconfig : passed 0:49.03 capri bcm_defconfig : passed 0:43.96 capri multi_v7_defconfig : passed 0:47.32 cubie sunxi_defconfig : passed 1:00.99 cubie multi_v7_defconfig : passed 0:57.67 cubie2 sunxi_defconfig : passed 0:56.25 cubie2 multi_v7_defconfig : passed 1:06.57 cubie2 multi_lpae_defconfig : passed 0:56.23 cubox dove_defconfig : passed 1:05.20 omap5uevm multi_v7_defconfig : warnings 1:37.38 omap5uevm multi_lpae_defconfig : warnings 1:34.96 panda omap2plus_defconfig : passed 1:16.69 sama5 sama5_defconfig : passed 1:50.86 seaboard tegra_defconfig : passed 1:01.36 snow exynos_defconfig : passed 1:22.45 snowball u8500_defconfig : passed 1:23.98 snowball multi_v7_defconfig : passed 2:10.06 trimslice tegra_defconfig : passed 1:00.09 trimslice multi_v7_defconfig : passed 1:08.76 wandboard imx_v6_v7_defconfig : passed 1:00.16 wandboard multi_v7_defconfig : passed 1:12.93 Offline boards: dalmore tegra_defconfig : OFFLINE 1:03.70 dalmore multi_v7_defconfig : OFFLINE 1:03.85 dalmore multi_lpae_defconfig : OFFLINE 1:03.71 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.77 hummingboard multi_v7_defconfig : OFFLINE 1:03.84 omap5uevm omap2plus_defconfig : OFFLINE 2:22.83 seaboard multi_v7_defconfig : OFFLINE 1:23.06 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.598907] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.605834] usbcore: registered new interface driver usbhid [ 1.611724] usbhid: USB HID core driver [ 1.619232] TCP: cubic registered [ 1.622711] NET: Registered protocol family 17 [ 1.627563] Key type dns_resolver registered [ 1.632537] Power Management for TI OMAP4+ devices. [ 1.637664] Power Management for TI OMAP4. [ 1.641998] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.649139] Registering SWP/SWPB emulation handler [ 1.654785] regulator-dummy: disabling [ 1.659149] vwl1271: 1800 mV [ 1.664276] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.673461] twl 0-0048: PIH (irq 39) nested IRQs [ 1.679077] twl_rtc rtc.11: Power up reset detected. [ 1.684936] twl_rtc rtc.11: Enabling TWL-RTC [ 1.691772] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.698699] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.704772] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.710845] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.716857] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.722381] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.727783] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.732818] VDAC: 1800 mV [ 1.732818] VANA: 2100 mV [ 1.740051] VCXIO: 1800 mV [ 1.740051] VUSB: 3300 mV [ 1.746917] V1V8: 1800 mV [ 1.750488] V2V1: 2100 mV [ 1.756408] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.877807] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.050079] hub 1-1:1.0: USB hub found [ 2.054168] hub 1-1:1.0: 5 ports detected [ 2.080780] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.339843] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.361053] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.472045] smsc95xx v1.0.4 [ 2.533538] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 82:5a:d7:28:91:69 ~$off # PYBOOT: Exception: timeout

10 years, 6 months

arm-soc boot: 35 pass, 7 fail (v3.14-rc5-1088-ge6f4128)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1088-ge6f4128 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 55.8 sec am335x-boneblack PASS: 0 min 26.2 sec omap3-beagle-xm PASS: 1 min 2.3 sec legacy,3530beagle PASS: 0 min 41.6 sec omap4-panda PASS: 1 min 7.7 sec omap3-overo-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 27.7 sec omap3-overo-storm-tobi PASS: 0 min 22.6 sec omap4-panda-es PASS: 1 min 7.3 sec legacy,3730storm PASS: 0 min 24.6 sec legacy,3530overo PASS: 0 min 21.2 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.5 sec sun4i-a10-cubieboard FAIL: 0 min 22.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.1 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 24.1 sec omap3-beagle-xm PASS: 0 min 53.3 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.5 sec omap4-panda PASS: 0 min 55.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 22.9 sec bcm28155-ap FAIL: 16 min 14.7 sec omap3-overo-tobi PASS: 0 min 22.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec am335x-bone PASS: 0 min 27.0 sec omap3-overo-storm-tobi PASS: 0 min 25.0 sec imx6q-wandboard PASS: 0 min 17.1 sec omap4-panda-es PASS: 0 min 52.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.4 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-j06qTn/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-j06qTn/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-j06qTn/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4564688 (45a6d0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-j06qTn/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-j06qTn/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-j06qTn/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a6d0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.07 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-vf2ybM/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-vf2ybM/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-vf2ybM/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-vf2ybM/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-vf2ybM/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-vf2ybM/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.48 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.160 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-vJGlUA/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-vJGlUA/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-vJGlUA/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-vJGlUA/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-vJGlUA/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-vJGlUA/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.97 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-papGk_/tmpBtXVnI-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-papGk_/tmpBtXVnI-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-papGk_/tmpBtXVnI-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580849 (45e5f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580785 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.51 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-eCIIxZ/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-eCIIxZ/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-eCIIxZ/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4539536 (454490 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-eCIIxZ/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-eCIIxZ/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-eCIIxZ/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15168 (3b40 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.94 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM <LAVA_DISPATCHER>2014-03-18 04:14:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:15:06 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:15:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:16:06 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:16:36 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:17:06 PM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-03-18 04:17:37 PM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xa74d02c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM before (last 100 chars): 0a3d000 - c0ac2000) [ 1.040000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 26296 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0xa07a60c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-03-18 04:17:37 PM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-03-18 04:17:39 PM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-03-18 04:27:41 PM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-03-18 04:27:41 PM INFO: CriticalError <LAVA_DISPATCHER>2014-03-18 04:27:41 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-03-18 04:27:41 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-03-18 04:27:42 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/ed3cb6e2976cb2d3f9c04b8bda38854c… LBOOT: Result: FAIL LBOOT: Time: 974.68 seconds.

10 years, 6 months

← Newer
1
...
11
12
13
14
15
16
17
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports March 2014