Linaro-mm-sig August 2012

linaro-mm-sig@lists.linaro.org

34 participants
31 discussions

[v2 0/4] ARM: dma-mapping: IOMMU atomic allocation

by Hiroshi Doyu

Hi, The commit e9da6e9 "ARM: dma-mapping: remove custom consistent dma region" breaks the compatibility with existing drivers. This causes the following kernel oops(*1). That driver has called dma_pool_alloc() to allocate memory from the interrupt context, and it hits BUG_ON(in_interrpt()) in "get_vm_area_caller()". This patch seris fixes this problem with making use of the pre-allocate atomic memory pool which DMA is using in the same way as DMA does now. Any comment would be really appreciated. v2: Don't modify attrs(DMA_ATTR_NO_KERNEL_MAPPING) for atomic allocation. (Marek) Skip vzalloc (KyongHo, Minchan) v1: http://lists.linaro.org/pipermail/linaro-mm-sig/2012-August/002398.html *1: [ 8.321343] ------------[ cut here ]------------ [ 8.325971] kernel BUG at kernel/mm/vmalloc.c:1322! [ 8.333615] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 8.339436] Modules linked in: [ 8.342496] CPU: 0 Tainted: G W (3.4.6-00067-g5d485f7 #67) [ 8.349192] PC is at __get_vm_area_node.isra.29+0x164/0x16c [ 8.354758] LR is at get_vm_area_caller+0x4c/0x54 [ 8.359454] pc : [<c011297c>] lr : [<c011318c>] psr: 20000193 [ 8.359458] sp : c09edca0 ip : c09ec000 fp : ae278000 [ 8.370922] r10: f0000000 r9 : c011aa54 r8 : c0a26cb8 [ 8.376136] r7 : 00000001 r6 : 000000d0 r5 : 20000008 r4 : c09edca0 [ 8.382651] r3 : 00010000 r2 : 20000008 r1 : 00000001 r0 : 00001000 [ 8.389166] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8.396549] Control: 10c5387d Table: ad98c04a DAC: 00000015 .... [ 9.169162] dfa0: 412fc099 c09ec000 00000000 c000fdd8 c06df1e4 c0a1b080 00000000 00000000 [ 9.177329] dfc0: c0a235cc 8000406a 00000000 c0986818 ffffffff ffffffff c0986404 00000000 [ 9.185497] dfe0: 00000000 c09bb070 10c5387d c0a19c58 c09bb064 80008044 00000000 00000000 [ 9.193673] [<c011297c>] (__get_vm_area_node.isra.29+0x164/0x16c) from [<c011318c>] (get_vm_area_caller+0x4c/0x54) [ 9.204022] [<c011318c>] (get_vm_area_caller+0x4c/0x54) from [<c001aed8>] (__iommu_alloc_remap.isra.14+0x2c/0xfc) [ 9.214276] [<c001aed8>] (__iommu_alloc_remap.isra.14+0x2c/0xfc) from [<c001b06c>] (arm_iommu_alloc_attrs+0xc4/0xf8) [ 9.224795] [<c001b06c>] (arm_iommu_alloc_attrs+0xc4/0xf8) from [<c011aa54>] (pool_alloc_page.constprop.5+0x6c/0xf8) [ 9.235309] [<c011aa54>] (pool_alloc_page.constprop.5+0x6c/0xf8) from [<c011ab60>] (dma_pool_alloc+0x80/0x170) [ 9.245304] [<c011ab60>] (dma_pool_alloc+0x80/0x170) from [<c03cbbcc>] (tegra_build_dtd+0x48/0x14c) [ 9.254344] [<c03cbbcc>] (tegra_build_dtd+0x48/0x14c) from [<c03cbd4c>] (tegra_req_to_dtd+0x7c/0xa8) [ 9.263467] [<c03cbd4c>] (tegra_req_to_dtd+0x7c/0xa8) from [<c03cc140>] (tegra_ep_queue+0x154/0x33c) [ 9.272592] [<c03cc140>] (tegra_ep_queue+0x154/0x33c) from [<c03dd5b4>] (composite_setup+0x364/0x6d4) [ 9.281804] [<c03dd5b4>] (composite_setup+0x364/0x6d4) from [<c03dd9dc>] (android_setup+0xb8/0x14c) [ 9.290843] [<c03dd9dc>] (android_setup+0xb8/0x14c) from [<c03cd144>] (setup_received_irq+0xbc/0x270) [ 9.300053] [<c03cd144>] (setup_received_irq+0xbc/0x270) from [<c03cda64>] (tegra_udc_irq+0x2ac/0x2c4) [ 9.309353] [<c03cda64>] (tegra_udc_irq+0x2ac/0x2c4) from [<c00b5708>] (handle_irq_event_percpu+0x78/0x2e0) [ 9.319087] [<c00b5708>] (handle_irq_event_percpu+0x78/0x2e0) from [<c00b59b4>] (handle_irq_event+0x44/0x64) [ 9.328907] [<c00b59b4>] (handle_irq_event+0x44/0x64) from [<c00b8688>] (handle_fasteoi_irq+0xc4/0x16c) [ 9.338294] [<c00b8688>] (handle_fasteoi_irq+0xc4/0x16c) from [<c00b4f14>] (generic_handle_irq+0x34/0x48) [ 9.347858] [<c00b4f14>] (generic_handle_irq+0x34/0x48) from [<c000f6f4>] (handle_IRQ+0x54/0xb4) [ 9.356637] [<c000f6f4>] (handle_IRQ+0x54/0xb4) from [<c00084b0>] (gic_handle_irq+0x2c/0x60) [ 9.365068] [<c00084b0>] (gic_handle_irq+0x2c/0x60) from [<c000e900>] (__irq_svc+0x40/0x70) [ 9.373405] Exception stack(0xc09edf10 to 0xc09edf58) [ 9.378447] df00: 00000000 000f4240 00000003 00000000 [ 9.386615] df20: 00000000 e55bbc00 ef66f3ca 00000001 00000000 412fc099 c0abb9c8 00000000 [ 9.394781] df40: 3b9ac9ff c09edf58 c027a9bc c0042880 20000113 ffffffff [ 9.401396] [<c000e900>] (__irq_svc+0x40/0x70) from [<c0042880>] (tegra_idle_enter_lp3+0x68/0x78) [ 9.410272] [<c0042880>] (tegra_idle_enter_lp3+0x68/0x78) from [<c04701d4>] (cpuidle_idle_call+0xdc/0x3a4) [ 9.419922] [<c04701d4>] (cpuidle_idle_call+0xdc/0x3a4) from [<c000fdd8>] (cpu_idle+0xd8/0x134) [ 9.428612] [<c000fdd8>] (cpu_idle+0xd8/0x134) from [<c0986818>] (start_kernel+0x27c/0x2cc) [ 9.436952] Code: e1a00004 e3a04000 eb002265 eaffffe0 (e7f001f2) [ 9.443038] ---[ end trace 1b75b31a2719ed24 ]--- [ 9.447645] Kernel panic - not syncing: Fatal exception in interrupt Hiroshi Doyu (4): ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: Use kzalloc() with GFP_ATOMIC ARM: dma-mapping: Refactor out to introduce __alloc_fill_pages ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC arch/arm/mm/dma-mapping.c | 102 ++++++++++++++++++++++++++++++++++----------- 1 files changed, 77 insertions(+), 25 deletions(-) -- 1.7.5.4

12 years, 4 months

[PATCHv6 0/2] ARM: replace custom consistent dma region with vmalloc

by Marek Szyprowski

Hello! This is yet another quick update on the patchset which replaces custom consistent dma regions usage in dma-mapping framework in favour of generic vmalloc areas created on demand for each allocation. The main purpose for this patchset is to remove 2MiB limit of dma coherent/writecombine allocations. This version addresses a few more cleanups pointed by Minchan Kim. This patch is based on vanilla v3.5 release. Best regards Marek Szyprowski Samsung Poland R&D Center Changelog: v6: - more cleanups of minor issues pointed by Minchan Kim, moved arm_dma_mmap() changes into separate patch v5: http://thread.gmane.org/gmane.linux.kernel.mm/83096 - fixed another minor issues pointed by Minchan Kim: added more comments here and there, changed pr_err() + stack_dump() to WARN(), added a fix for no-MMU systems v4: http://thread.gmane.org/gmane.linux.kernel.mm/80906 - replaced arch-independent VM_DMA flag with ARM-specific VM_ARM_DMA_CONSISTENT flag v3: http://thread.gmane.org/gmane.linux.kernel.mm/80028 - rebased onto v3.4-rc2: added support for IOMMU-aware implementation of dma-mapping calls, unified with CMA coherent dma pool - implemented changes requested by Minchan Kim: added more checks for vmarea->flags & VM_DMA, renamed some variables, removed obsole locks, squashed find_vm_area() exporting patch into the main redesign patch v2: http://thread.gmane.org/gmane.linux.kernel.mm/78563 - added support for atomic allocations (served from preallocated pool) - minor cleanup here and there - rebased onto v3.4-rc7 v1: http://thread.gmane.org/gmane.linux.kernel.mm/76703 - initial version Patch summary: Marek Szyprowski (2): mm: vmalloc: use const void * for caller argument ARM: dma-mapping: remove custom consistent dma region Documentation/kernel-parameters.txt | 2 +- arch/arm/include/asm/dma-mapping.h | 2 +- arch/arm/mm/dma-mapping.c | 486 ++++++++++++----------------------- arch/arm/mm/mm.h | 3 + include/linux/vmalloc.h | 9 +- mm/vmalloc.c | 28 ++- 6 files changed, 194 insertions(+), 336 deletions(-) -- 1.7.1.569.g6f426

12 years, 4 months

[PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator

by Marek Szyprowski

Contiguous Memory Allocator requires only paging and MMU enabled not particular CPU architectures, so there is no need for strict dependency on CPU type. This enables to use CMA on some older ARM v5 systems which also might need large contiguous blocks for the multimedia processing hw modules. Reported-by: Prabhakar Lad <prabhakar.csengg(a)gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- arch/arm/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cd..6ef75e2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION -- 1.7.1.569.g6f426

12 years, 4 months

[PATCHv7 00/15] Integration of videobuf2 with dmabuf

by Tomasz Stanislawski

Hello everyone, This patchset adds support for DMABUF [2] importing to V4L2 stack. The support for DMABUF exporting was moved to separate patchset due to dependency on patches for DMA mapping redesign by Marek Szyprowski [4]. This patchset depends on new scatterlist constructor [5]. v7: - support for V4L2_MEMORY_DMABUF in v4l2-compact-ioctl32.c - cosmetic fixes to the documentation - added importing for vmalloc because vmap support in dmabuf for 3.5 was pull-requested - support for dmabuf importing for VIVI - resurrect allocation of dma-contig context - remove reference of alloc_ctx in dma-contig buffer - use sg_alloc_table_from_pages - fix DMA scatterlist calls to use orig_nents instead of nents - fix memleak in vb2_dc_sgt_foreach_page (use orig_nents instead of nents) v6: - fixed missing entry in v4l2_memory_names - fixed a bug occuring after get_user_pages failure - fixed a bug caused by using invalid vma for get_user_pages - prepare/finish no longer call dma_sync for dmabuf buffers v5: - removed change of importer/exporter behaviour - fixes vb2_dc_pages_to_sgt basing on Laurent's hints - changed pin/unpin words to lock/unlock in Doc v4: - rebased on mainline 3.4-rc2 - included missing importing support for s5p-fimc and s5p-tv - added patch for changing map/unmap for importers - fixes to Documentation part - coding style fixes - pairing {map/unmap}_dmabuf in vb2-core - fixing variable types and semantic of arguments in videobufb2-dma-contig.c v3: - rebased on mainline 3.4-rc1 - split 'code refactor' patch to multiple smaller patches - squashed fixes to Sumit's patches - patchset is no longer dependant on 'DMA mapping redesign' - separated path for handling IO and non-IO mappings - add documentation for DMABUF importing to V4L - removed all DMABUF exporter related code - removed usage of dma_get_pages extension v2: - extended VIDIOC_EXPBUF argument from integer memoffset to struct v4l2_exportbuffer - added patch that breaks DMABUF spec on (un)map_atachment callcacks but allows to work with existing implementation of DMABUF prime in DRM - all dma-contig code refactoring patches were squashed - bugfixes v1: List of changes since [1]. - support for DMA api extension dma_get_pages, the function is used to retrieve pages used to create DMA mapping. - small fixes/code cleanup to videobuf2 - added prepare and finish callbacks to vb2 allocators, it is used keep consistency between dma-cpu acess to the memory (by Marek Szyprowski) - support for exporting of DMABUF buffer in V4L2 and Videobuf2, originated from [3]. - support for dma-buf exporting in vb2-dma-contig allocator - support for DMABUF for s5p-tv and s5p-fimc (capture interface) drivers, originated from [3] - changed handling for userptr buffers (by Marek Szyprowski, Andrzej Pietrasiewicz) - let mmap method to use dma_mmap_writecombine call (by Marek Szyprowski) [1] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/4296… [2] https://lkml.org/lkml/2011/12/26/29 [3] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/3635… [4] http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819 [5] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/47983 Laurent Pinchart (2): v4l: vb2-dma-contig: Shorten vb2_dma_contig prefix to vb2_dc v4l: vb2-dma-contig: Reorder functions Marek Szyprowski (2): v4l: vb2: add prepare/finish callbacks to allocators v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator Sumit Semwal (4): v4l: Add DMABUF as a memory type v4l: vb2: add support for shared buffer (dma_buf) v4l: vb: remove warnings about MEMORY_DMABUF v4l: vb2-dma-contig: add support for dma_buf importing Tomasz Stanislawski (7): Documentation: media: description of DMABUF importing in V4L2 v4l: vb2-dma-contig: remove reference of alloc_ctx from a buffer v4l: vb2-dma-contig: add support for scatterlist in userptr mode v4l: vb2-vmalloc: add support for dmabuf importing v4l: vivi: support for dmabuf importing v4l: s5p-tv: mixer: support for dmabuf importing v4l: s5p-fimc: support for dmabuf importing Documentation/DocBook/media/v4l/compat.xml | 4 + Documentation/DocBook/media/v4l/io.xml | 179 ++++++++ .../DocBook/media/v4l/vidioc-create-bufs.xml | 3 +- Documentation/DocBook/media/v4l/vidioc-qbuf.xml | 15 + Documentation/DocBook/media/v4l/vidioc-reqbufs.xml | 47 +- drivers/media/video/Kconfig | 1 + drivers/media/video/s5p-fimc/Kconfig | 1 + drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/s5p-tv/Kconfig | 1 + drivers/media/video/s5p-tv/mixer_video.c | 2 +- drivers/media/video/v4l2-compat-ioctl32.c | 16 + drivers/media/video/v4l2-ioctl.c | 1 + drivers/media/video/videobuf-core.c | 4 + drivers/media/video/videobuf2-core.c | 207 ++++++++- drivers/media/video/videobuf2-dma-contig.c | 470 +++++++++++++++++--- drivers/media/video/videobuf2-vmalloc.c | 56 +++ drivers/media/video/vivi.c | 2 +- include/linux/videodev2.h | 7 + include/media/videobuf2-core.h | 34 ++ 19 files changed, 963 insertions(+), 89 deletions(-) -- 1.7.9.5

12 years, 4 months

[PATCH v2 0/2] Enhance DMABUF with reference counting for exporter module

by Tomasz Stanislawski

Hello, This patchset adds reference counting for an exporter module to DMABUF framework. Moreover, it adds setup of an owner field for exporters in DRM subsystem. v1: Original v2: - split patch into DMABUF and DRM part - allow owner to be NULL Regards, Tomasz Stanislawski Tomasz Stanislawski (2): dma-buf: add reference counting for exporter module drm: set owner field to for all DMABUF exporters Documentation/dma-buf-sharing.txt | 3 ++- drivers/base/dma-buf.c | 9 ++++++++- drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 1 + drivers/gpu/drm/i915/i915_gem_dmabuf.c | 1 + drivers/gpu/drm/nouveau/nouveau_prime.c | 1 + drivers/gpu/drm/radeon/radeon_prime.c | 1 + drivers/staging/omapdrm/omap_gem_dmabuf.c | 1 + include/linux/dma-buf.h | 2 ++ 8 files changed, 17 insertions(+), 2 deletions(-) -- 1.7.9.5

12 years, 4 months

[PATCH 1/3] dma-fence: dma-buf synchronization (v7)

by Maarten Lankhorst

A dma-fence can be attached to a buffer which is being filled or consumed by hw, to allow userspace to pass the buffer without waiting to another device. For example, userspace can call page_flip ioctl to display the next frame of graphics after kicking the GPU but while the GPU is still rendering. The display device sharing the buffer with the GPU would attach a callback to get notified when the GPU's rendering-complete IRQ fires, to update the scan-out address of the display, without having to wake up userspace. A dma-fence is transient, one-shot deal. It is allocated and attached to one or more dma-buf's. When the one that attached it is done, with the pending operation, it can signal the fence. + dma_fence_signal() The dma-buf-mgr handles tracking, and waiting on, the fences associated with a dma-buf. TODO maybe need some helper fxn for simple devices, like a display- only drm/kms device which simply wants to wait for exclusive fence to be signaled, and then attach a non-exclusive fence while scanout is in progress. The one pending on the fence can add an async callback: + dma_fence_add_callback() The callback can optionally be cancelled with remove_wait_queue() Or wait synchronously (optionally with timeout or interruptible): + dma_fence_wait() A default software-only implementation is provided, which can be used by drivers attaching a fence to a buffer when they have no other means for hw sync. But a memory backed fence is also envisioned, because it is common that GPU's can write to, or poll on some memory location for synchronization. For example: fence = dma_buf_get_fence(dmabuf); if (fence->ops == &bikeshed_fence_ops) { dma_buf *fence_buf; dma_bikeshed_fence_get_buf(fence, &fence_buf, &offset); ... tell the hw the memory location to wait on ... } else { /* fall-back to sw sync * / dma_fence_add_callback(fence, my_cb); } On SoC platforms, if some other hw mechanism is provided for synchronizing between IP blocks, it could be supported as an alternate implementation with it's own fence ops in a similar way. To facilitate other non-sw implementations, the enable_signaling callback can be used to keep track if a device not supporting hw sync is waiting on the fence, and in this case should arrange to call dma_fence_signal() at some point after the condition has changed, to notify other devices waiting on the fence. If there are no sw waiters, this can be skipped to avoid waking the CPU unnecessarily. The handler of the enable_signaling op should take a refcount until the fence is signaled, then release its ref. The intention is to provide a userspace interface (presumably via eventfd) later, to be used in conjunction with dma-buf's mmap support for sw access to buffers (or for userspace apps that would prefer to do their own synchronization). v1: Original v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided that dma-fence didn't need to care about the sw->hw signaling path (it can be handled same as sw->sw case), and therefore the fence->ops can be simplified and more handled in the core. So remove the signal, add_callback, cancel_callback, and wait ops, and replace with a simple enable_signaling() op which can be used to inform a fence supporting hw->hw signaling that one or more devices which do not support hw signaling are waiting (and therefore it should enable an irq or do whatever is necessary in order that the CPU is notified when the fence is passed). v3: Fix locking fail in attach_fence() and get_fence() v4: Remove tie-in w/ dma-buf.. after discussion w/ danvet and mlankorst we decided that we need to be able to attach one fence to N dma-buf's, so using the list_head in dma-fence struct would be problematic. v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager. v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments about checking if fence fired or not. This is broken by design. waitqueue_active during destruction is now fatal, since the signaller should be holding a reference in enable_signalling until it signalled the fence. Pass the original dma_fence_cb along, and call __remove_wait in the dma_fence_callback handler, so that no cleanup needs to be performed. v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if fence wasn't signaled yet, for example for hardware fences that may choose to signal blindly. Signed-off-by: Maarten Lankhorst <maarten.lankhorst(a)canonical.com> --- drivers/base/Makefile | 2 drivers/base/dma-fence.c | 287 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/dma-fence.h | 96 +++++++++++++++ 3 files changed, 384 insertions(+), 1 deletion(-) create mode 100644 drivers/base/dma-fence.c create mode 100644 include/linux/dma-fence.h diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 5aa2d70..6e9f217 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_CMA) += dma-contiguous.o obj-y += power/ obj-$(CONFIG_HAS_DMA) += dma-mapping.o obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o +obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o dma-fence.o obj-$(CONFIG_ISA) += isa.o obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o diff --git a/drivers/base/dma-fence.c b/drivers/base/dma-fence.c new file mode 100644 index 0000000..c280ee7 --- /dev/null +++ b/drivers/base/dma-fence.c @@ -0,0 +1,287 @@ +/* + * Fence mechanism for dma-buf to allow for asynchronous dma access + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark(a)linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/export.h> +#include <linux/dma-fence.h> + +/** + * dma_fence_signal - Signal a fence. + * + * @fence: The fence to signal + * + * All registered callbacks will be called directly (synchronously) and + * all blocked waters will be awoken. + * + * TODO: any value in adding a dma_fence_cancel(), for example to recov + * from hung gpu? It would behave like dma_fence_signal() but return + * an error to waiters and cb's to let them know that the condition they + * are waiting for will never happen. + */ +int dma_fence_signal(struct dma_fence *fence) +{ + unsigned long flags; + int ret = -EINVAL; + + if (WARN_ON(!fence)) + return -EINVAL; + + spin_lock_irqsave(&fence->event_queue.lock, flags); + if (!fence->signaled) { + fence->signaled = true; + __wake_up_locked_key(&fence->event_queue, TASK_NORMAL, + &fence->event_queue); + ret = 0; + } else WARN(1, "Already signaled"); + spin_unlock_irqrestore(&fence->event_queue.lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(dma_fence_signal); + +static void release_fence(struct kref *kref) +{ + struct dma_fence *fence = + container_of(kref, struct dma_fence, refcount); + + BUG_ON(waitqueue_active(&fence->event_queue)); + + if (fence->ops->release) + fence->ops->release(fence); + + kfree(fence); +} + +/** + * dma_fence_put - Release a reference to the fence. + */ +void dma_fence_put(struct dma_fence *fence) +{ + WARN_ON(!fence); + kref_put(&fence->refcount, release_fence); +} +EXPORT_SYMBOL_GPL(dma_fence_put); + +/** + * dma_fence_get - Take a reference to the fence. + * + * In most cases this is used only internally by dma-fence. + */ +void dma_fence_get(struct dma_fence *fence) +{ + WARN_ON(!fence); + kref_get(&fence->refcount); +} +EXPORT_SYMBOL_GPL(dma_fence_get); + +static int check_signaling(struct dma_fence *fence) +{ + bool enable_signaling = false, signaled; + unsigned long flags; + + spin_lock_irqsave(&fence->event_queue.lock, flags); + signaled = fence->signaled; + if (!signaled && !fence->needs_sw_signal) + enable_signaling = fence->needs_sw_signal = true; + spin_unlock_irqrestore(&fence->event_queue.lock, flags); + + if (enable_signaling) { + int ret; + + /* At this point, if enable_signaling returns any error + * a wakeup has to be performanced regardless. + * -ENOENT signals fence was already signaled. Any other error + * inidicates a catastrophic hardware error. + * + * If any hardware error occurs, nothing can be done against + * it, so it's treated like the fence was already signaled. + * No synchronization can be performed, so we have to assume + * the fence was already signaled. + */ + ret = fence->ops->enable_signaling(fence); + if (ret) { + signaled = true; + dma_fence_signal(fence); + } + } + + if (!signaled) + return 0; + else + return -ENOENT; +} + +int __dma_fence_wake_func(wait_queue_t *wait, unsigned mode, + int flags, void *key) +{ + struct dma_fence_cb *cb = + container_of(wait, struct dma_fence_cb, base); + + __remove_wait_queue(key, wait); + return cb->func(cb, wait->private); +} + +/** + * dma_fence_add_callback - Add a callback to be called when the fence + * is signaled. + * + * @fence: The fence to wait on + * @cb: The callback to register + * + * Any number of callbacks can be registered to a fence, but a callback + * can only be registered to once fence at a time. + * + * Note that the callback can be called from an atomic context. If + * fence is already signaled, this function will return -ENOENT (and + * *not* call the callback) + */ +int dma_fence_add_callback(struct dma_fence *fence, struct dma_fence_cb *cb, + dma_fence_func_t func, void *priv) +{ + unsigned long flags; + int ret; + + if (WARN_ON(!fence || !func)) + return -EINVAL; + + ret = check_signaling(fence); + + spin_lock_irqsave(&fence->event_queue.lock, flags); + if (!ret && fence->signaled) + ret = -ENOENT; + + if (!ret) { + cb->base.flags = 0; + cb->base.func = __dma_fence_wake_func; + cb->base.private = priv; + cb->fence = fence; + cb->func = func; + __add_wait_queue(&fence->event_queue, &cb->base); + } + spin_unlock_irqrestore(&fence->event_queue.lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(dma_fence_add_callback); + +/** + * dma_fence_wait - Wait for a fence to be signaled. + * + * @fence: The fence to wait on + * @interruptible: if true, do an interruptible wait + * @timeout: absolute time for timeout, in jiffies. + * + * Returns 0 on success, -EBUSY if a timeout occured, + * -ERESTARTSYS if the wait was interrupted by a signal. + */ +int dma_fence_wait(struct dma_fence *fence, bool interruptible, unsigned long timeout) +{ + unsigned long cur; + int ret; + + if (WARN_ON(!fence)) + return -EINVAL; + + cur = jiffies; + if (time_after_eq(cur, timeout)) + return -EBUSY; + + timeout -= cur; + + ret = check_signaling(fence); + if (ret == -ENOENT) + return 0; + else if (ret) + return ret; + + if (interruptible) + ret = wait_event_interruptible_timeout(fence->event_queue, + fence->signaled, + timeout); + else + ret = wait_event_timeout(fence->event_queue, + fence->signaled, timeout); + + if (ret > 0) + return 0; + else if (!ret) + return -EBUSY; + else + return ret; +} +EXPORT_SYMBOL_GPL(dma_fence_wait); + +/* + * Helpers intended to be used by the ops of the dma_fence implementation: + * + * NOTE: helpers and fxns intended to be used by other dma-fence + * implementations are not exported.. I'm not really sure if it makes + * sense to have a dma-fence implementation that is itself a module. + */ + +void __dma_fence_init(struct dma_fence *fence, struct dma_fence_ops *ops, void *priv) +{ + WARN_ON(!ops || !ops->enable_signaling); + + kref_init(&fence->refcount); + fence->ops = ops; + fence->priv = priv; + init_waitqueue_head(&fence->event_queue); +} +EXPORT_SYMBOL_GPL(__dma_fence_init); + +/* + * Pure sw implementation for dma-fence. The CPU always gets involved. + */ + +static int sw_enable_signaling(struct dma_fence *fence) +{ + /* + * pure sw, no irq's to enable, because the fence creator will + * always call dma_fence_signal() + */ + return 0; +} + +static struct dma_fence_ops sw_fence_ops = { + .enable_signaling = sw_enable_signaling, +}; + +/** + * dma_fence_create - Create a simple sw-only fence. + * + * This fence only supports signaling from/to CPU. Other implementations + * of dma-fence can be used to support hardware to hardware signaling, if + * supported by the hardware, and use the dma_fence_helper_* functions for + * compatibility with other devices that only support sw signaling. + */ +struct dma_fence *dma_fence_create(void) +{ + struct dma_fence *fence; + + fence = kzalloc(sizeof(struct dma_fence), GFP_KERNEL); + if (!fence) + return ERR_PTR(-ENOMEM); + + __dma_fence_init(fence, &sw_fence_ops, 0); + + return fence; +} +EXPORT_SYMBOL_GPL(dma_fence_create); diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h new file mode 100644 index 0000000..70d12c0 --- /dev/null +++ b/include/linux/dma-fence.h @@ -0,0 +1,96 @@ +/* + * Fence mechanism for dma-buf to allow for asynchronous dma access + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark(a)linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DMA_FENCE_H__ +#define __DMA_FENCE_H__ + +#include <linux/err.h> +#include <linux/list.h> +#include <linux/wait.h> +#include <linux/list.h> +#include <linux/dma-buf.h> + +struct dma_fence; +struct dma_fence_ops; +struct dma_fence_cb; + +struct dma_fence { + struct kref refcount; + struct dma_fence_ops *ops; + wait_queue_head_t event_queue; + void *priv; + + /* has this fence been signaled yet? */ + bool signaled : 1; + + /* do we have one or more waiters or callbacks? */ + bool needs_sw_signal : 1; +}; + +typedef int (*dma_fence_func_t)(struct dma_fence_cb *cb, void *priv); + +struct dma_fence_cb { + wait_queue_t base; + dma_fence_func_t func; + struct dma_fence *fence; +}; + +struct dma_fence_ops { + /** + * For fence implementations that have the capability for hw->hw + * signaling, they can implement this op to enable the necessary + * irqs, or insert commands into cmdstream, etc. This is called + * in the first wait() or add_callback() path to let the fence + * implementation know that there is another driver waiting on + * the signal (ie. hw->sw case). + * + * A return value of -ENOENT will indicate that the fence has + * already passed. Any other errors will be treated as -ENOENT, + * and can happen because of hardware failure. + */ + int (*enable_signaling)(struct dma_fence *fence); + void (*release)(struct dma_fence *fence); +}; + +/* + * TODO does it make sense to be able to enable dma-fence without dma-buf, + * or visa versa? + */ +#ifdef CONFIG_DMA_SHARED_BUFFER + +/* create a basic (pure sw) fence: */ +struct dma_fence *dma_fence_create(void); + +/* intended to be used by other dma_fence implementations: */ +void __dma_fence_init(struct dma_fence *fence, + struct dma_fence_ops *ops, void *priv); + +void dma_fence_get(struct dma_fence *fence); +void dma_fence_put(struct dma_fence *fence); + +int dma_fence_signal(struct dma_fence *fence); +int dma_fence_wait(struct dma_fence *fence, bool interruptible, unsigned long timeout); +int dma_fence_add_callback(struct dma_fence *fence, struct dma_fence_cb *cb, + dma_fence_func_t func, void *priv); + +#else +// TODO +#endif /* CONFIG_DMA_SHARED_BUFFER */ + +#endif /* __DMA_FENCE_H__ */

12 years, 4 months

[GIT PULL] DMA-mapping fixups for v3.6-rc2

by Marek Szyprowski

Hi Linus, I would like to ask for pulling a set of fixup patches for ARM dma-mapping extensions merged in v3.6-rc1. The following changes since commit 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee: Linux 3.6-rc1 (2012-08-02 16:38:10 -0700) with the top-most commit d9e0d149b5dcc2ef4688afc572b9906bcda941ef ARM: dma-mapping: fix incorrect freeing of atomic allocations are available in the git repository at: git://git.linaro.org/people/mszyprowski/linux-dma-mapping.git fixes-for-linus-for-3.6-rc2 Thanks! Best regards Marek Szyprowski Samsung Poland R&D Center Patch summary: Aaro Koskinen (2): ARM: dma-mapping: fix atomic allocation alignment ARM: dma-mapping: fix incorrect freeing of atomic allocations Chris Brand (1): ARM: mm: fix MMU mapping of CMA regions arch/arm/mm/dma-mapping.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)

12 years, 4 months

[PATCH] dma-buf: add reference counting for exporter module

by Tomasz Stanislawski

This patch adds reference counting on a module that exports dma-buf and implements its operations. This prevents the module from being unloaded while DMABUF file is in use. Signed-off-by: Tomasz Stanislawski <t.stanislaws(a)samsung.com> --- Documentation/dma-buf-sharing.txt | 3 ++- drivers/base/dma-buf.c | 10 +++++++++- drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 1 + drivers/gpu/drm/i915/i915_gem_dmabuf.c | 1 + drivers/gpu/drm/nouveau/nouveau_prime.c | 1 + drivers/gpu/drm/radeon/radeon_prime.c | 1 + drivers/staging/omapdrm/omap_gem_dmabuf.c | 1 + include/linux/dma-buf.h | 2 ++ 8 files changed, 18 insertions(+), 2 deletions(-) diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index ad86fb8..2613057 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -49,7 +49,8 @@ The dma_buf buffer sharing API usage contains the following steps: The buffer exporter announces its wish to export a buffer. In this, it connects its own private buffer data, provides implementation for operations that can be performed on the exported dma_buf, and flags for the file - associated with this buffer. + associated with this buffer. The operations structure has owner field. + You should initialize this to THIS_MODULE in most cases. Interface: struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index c30f3e1..d14b2f5 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -27,6 +27,7 @@ #include <linux/dma-buf.h> #include <linux/anon_inodes.h> #include <linux/export.h> +#include <linux/module.h> static inline int is_dma_buf_file(struct file *); @@ -40,6 +41,7 @@ static int dma_buf_release(struct inode *inode, struct file *file) dmabuf = file->private_data; dmabuf->ops->release(dmabuf); + module_put(dmabuf->ops->owner); kfree(dmabuf); return 0; } @@ -96,6 +98,7 @@ struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, struct file *file; if (WARN_ON(!priv || !ops + || !ops->owner || !ops->map_dma_buf || !ops->unmap_dma_buf || !ops->release @@ -105,9 +108,14 @@ struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, return ERR_PTR(-EINVAL); } + if (!try_module_get(ops->owner)) + return ERR_PTR(-ENOENT); + dmabuf = kzalloc(sizeof(struct dma_buf), GFP_KERNEL); - if (dmabuf == NULL) + if (dmabuf == NULL) { + module_put(ops->owner); return ERR_PTR(-ENOMEM); + } dmabuf->priv = priv; dmabuf->ops = ops; diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 613bf8a..cf3bc6d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -164,6 +164,7 @@ static void exynos_gem_dmabuf_kunmap(struct dma_buf *dma_buf, } static struct dma_buf_ops exynos_dmabuf_ops = { + .owner = THIS_MODULE, .map_dma_buf = exynos_gem_map_dma_buf, .unmap_dma_buf = exynos_gem_unmap_dma_buf, .kmap = exynos_gem_dmabuf_kmap, diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c index aa308e1..07ff03b 100644 --- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c +++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c @@ -152,6 +152,7 @@ static int i915_gem_dmabuf_mmap(struct dma_buf *dma_buf, struct vm_area_struct * } static const struct dma_buf_ops i915_dmabuf_ops = { + .owner = THIS_MODULE, .map_dma_buf = i915_gem_map_dma_buf, .unmap_dma_buf = i915_gem_unmap_dma_buf, .release = i915_gem_dmabuf_release, diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c index a25cf2c..8605033 100644 --- a/drivers/gpu/drm/nouveau/nouveau_prime.c +++ b/drivers/gpu/drm/nouveau/nouveau_prime.c @@ -127,6 +127,7 @@ static void nouveau_gem_prime_vunmap(struct dma_buf *dma_buf, void *vaddr) } static const struct dma_buf_ops nouveau_dmabuf_ops = { + .owner = THIS_MODULE, .map_dma_buf = nouveau_gem_map_dma_buf, .unmap_dma_buf = nouveau_gem_unmap_dma_buf, .release = nouveau_gem_dmabuf_release, diff --git a/drivers/gpu/drm/radeon/radeon_prime.c b/drivers/gpu/drm/radeon/radeon_prime.c index 6bef46a..4061fd3 100644 --- a/drivers/gpu/drm/radeon/radeon_prime.c +++ b/drivers/gpu/drm/radeon/radeon_prime.c @@ -127,6 +127,7 @@ static void radeon_gem_prime_vunmap(struct dma_buf *dma_buf, void *vaddr) mutex_unlock(&dev->struct_mutex); } const static struct dma_buf_ops radeon_dmabuf_ops = { + .owner = THIS_MODULE, .map_dma_buf = radeon_gem_map_dma_buf, .unmap_dma_buf = radeon_gem_unmap_dma_buf, .release = radeon_gem_dmabuf_release, diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c index 42728e0..6a4dd67 100644 --- a/drivers/staging/omapdrm/omap_gem_dmabuf.c +++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c @@ -179,6 +179,7 @@ out_unlock: } struct dma_buf_ops omap_dmabuf_ops = { + .owner = THIS_MODULE, .map_dma_buf = omap_gem_map_dma_buf, .unmap_dma_buf = omap_gem_unmap_dma_buf, .release = omap_gem_dmabuf_release, diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index eb48f38..22953de 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -37,6 +37,7 @@ struct dma_buf_attachment; /** * struct dma_buf_ops - operations possible on struct dma_buf + * @owner: the module that implements dma_buf operations * @attach: [optional] allows different devices to 'attach' themselves to the * given buffer. It might return -EBUSY to signal that backing storage * is already allocated and incompatible with the requirements @@ -70,6 +71,7 @@ struct dma_buf_attachment; * @vunmap: [optional] unmaps a vmap from the buffer */ struct dma_buf_ops { + struct module *owner; int (*attach)(struct dma_buf *, struct device *, struct dma_buf_attachment *); -- 1.7.9.5

12 years, 4 months

[PATCHv2 0/9] Support for dmabuf exporting for videobuf2

by Tomasz Stanislawski

Hello everyone, The patches adds support for DMABUF exporting to V4L2 stack. The latest support for DMABUF importing was posted in [1]. The exporter part is dependant on DMA mapping redesign [2] which is expected to be merged into the mainline. Therefore it is posted as a separate patchset. Moreover some patches depends on vmap extension for DMABUF by Dave Airlie [3] and sg_alloc_table_from_pages function [4]. The last patch 'v4l: vb2-dma-contig: use dma_get_sgtable' depends on dma_get_sgtable extension to DMA api [5]. The tree with all the patches and extensions is available at: repo: git://git.infradead.org/users/kmpark/linux-2.6-samsung branch: media-for3.5-vb2-dmabuf-v7 Changelog: v2: - add documentation for DMABUF exporting - squashed 'let mmap method to use dma_mmap_coherent call' with 'remove vb2_mmap_pfn_range function' - move setup of scatterlist for MMAP buffers from alloc to DMABUF export code - use locking to serialize map/unmap of DMABUF attachments - squash vmap/kmap, setup of sg lists, allocation in attachments into dma-contig exporter patch - fix occasional failure of follow_pfn trick by using init_mm in artificial VMA - add support for exporting in s5p-mfc driver - drop all code that duplicates sg_alloc_table_from_pages - introduce usage of dma_get_sgtable as generic solution to follow_pfn trick v1: - updated setup of VIDIOC_EXPBUF ioctl - doc updates - introduced workaround to avoid using dma_get_pages, - removed caching of exported dmabuf to avoid existence of circular reference between dmabuf and vb2_dc_buf or resource leakage - removed all 'change behaviour' patches - inital support for exporting in s5p-mfs driver - removal of vb2_mmap_pfn_range that is no longer used - use sg_alloc_table_from_pages instead of creating sglist in vb2_dc code - move attachment allocation to exporter's attach callback v0: RFC - initial version [1] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/49438 [2] http://thread.gmane.org/gmane.linux.kernel.cross-arch/14098 [3] http://permalink.gmane.org/gmane.comp.video.dri.devel/69302 [4] This patchset is rebased on 3.4-rc1 plus the following patchsets: [5] http://www.spinics.net/lists/linux-arch/msg18282.html Marek Szyprowski (1): v4l: vb2-dma-contig: let mmap method to use dma_mmap_coherent call Tomasz Stanislawski (8): Documentation: media: description of DMABUF exporting in V4L2 v4l: add buffer exporting via dmabuf v4l: vb2: add buffer exporting via dmabuf v4l: vb2-dma-contig: add support for DMABUF exporting v4l: s5p-fimc: support for dmabuf exporting v4l: s5p-tv: mixer: support for dmabuf exporting v4l: s5p-mfc: support for dmabuf exporting v4l: vb2-dma-contig: use dma_get_sgtable Documentation/DocBook/media/v4l/compat.xml | 3 + Documentation/DocBook/media/v4l/io.xml | 3 + Documentation/DocBook/media/v4l/v4l2.xml | 1 + Documentation/DocBook/media/v4l/vidioc-expbuf.xml | 223 ++++++++++++++++++++ drivers/media/video/s5p-fimc/fimc-capture.c | 9 + drivers/media/video/s5p-mfc/s5p_mfc_dec.c | 18 ++ drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 18 ++ drivers/media/video/s5p-tv/mixer_video.c | 10 + drivers/media/video/v4l2-compat-ioctl32.c | 1 + drivers/media/video/v4l2-dev.c | 1 + drivers/media/video/v4l2-ioctl.c | 6 + drivers/media/video/videobuf2-core.c | 67 ++++++ drivers/media/video/videobuf2-dma-contig.c | 224 ++++++++++++++++++++- drivers/media/video/videobuf2-memops.c | 40 ---- include/linux/videodev2.h | 26 +++ include/media/v4l2-ioctl.h | 2 + include/media/videobuf2-core.h | 2 + include/media/videobuf2-memops.h | 5 - 18 files changed, 612 insertions(+), 47 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/vidioc-expbuf.xml -- 1.7.9.5

12 years, 4 months

[PATCH 0/2] dma-parms and helpers for dma-buf

by Rob Clark

From: Rob Clark <rob(a)ti.com> Re-sending first patch, with a wider audience. Apparently I didn't spam enough inboxes the first time. And, at Daniel Vetter's suggestion, adding some helper functions in dma-buf to get the most restrictive parameters of all the attached devices. Rob Clark (2): device: add dma_params->max_segment_count dma-buf: add helpers for attacher dma-parms drivers/base/dma-buf.c | 63 +++++++++++++++++++++++++++++++++++++++++++ include/linux/device.h | 1 + include/linux/dma-buf.h | 19 +++++++++++++ include/linux/dma-mapping.h | 16 +++++++++++ 4 files changed, 99 insertions(+) -- 1.7.9.5

12 years, 4 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig August 2012