Linaro-mm-sig April 2016

linaro-mm-sig@lists.linaro.org

5 participants
6 discussions

[PATCH] allow buffers allocation with DMABUF memory type

by Benjamin Gaignard

Until now the only way to make the driver allocate buffers and share them using dma_buf was to use V4L2_MEMORY_MMAP memory type. Use of MMAP memory type is a problem because vb2 never call dma_buf_map_attachment() to attach itself while queuing the buffer so dma_buf importer will not know that another device use this buffer. This patch allow to allocate buffer even for DMABUF memory type and correctly manage dma_buf buffer attachment. vb2_mem_ops attach_dmabuf() prototype has been changed to be able to distinguish if the attachment is done on a already existing buffer or on imported one. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- drivers/media/v4l2-core/videobuf2-core.c | 76 ++++++++++++++++++++++++-- drivers/media/v4l2-core/videobuf2-dma-contig.c | 10 ++-- drivers/media/v4l2-core/videobuf2-dma-sg.c | 8 ++- drivers/media/v4l2-core/videobuf2-vmalloc.c | 8 ++- include/media/videobuf2-core.h | 5 +- 5 files changed, 91 insertions(+), 16 deletions(-) diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 1329dcc..c5968aa 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -337,6 +337,67 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) } /** + * __setup_dmabufs() - setup dmabuf fd for every plane in + * every buffer on the queue + */ +static void __setup_dmabufs(struct vb2_queue *q, unsigned int n) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + struct vb2_plane *vb_plane; + struct dma_buf *dbuf; + void *mem_priv; + int fd; + int write = !V4L2_TYPE_IS_OUTPUT(q->type); + int flags = write ? O_WRONLY : O_RDONLY; + + for (buffer = q->num_buffers; buffer < q->num_buffers + n; ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + for (plane = 0; plane < vb->num_planes; ++plane) { + vb_plane = &vb->planes[plane]; + + dbuf = call_ptr_memop(vb, get_dmabuf, + vb_plane->mem_priv, + flags & O_ACCMODE); + if (IS_ERR_OR_NULL(dbuf)) { + dprintk(1, "Failed to export buffer %d, " \ + "plane %d\n", buffer, plane); + continue; + } + + fd = dma_buf_fd(dbuf, flags & ~O_ACCMODE); + if (fd < 0) { + dprintk(3, "buffer %d, plane %d failed " \ + "to export (%d)\n", buffer, plane, fd); + dma_buf_put(dbuf); + continue; + } + + /* Acquire each plane's memory */ + mem_priv = call_ptr_memop(vb, attach_dmabuf, + q->alloc_ctx[plane], dbuf, + vb->v4l2_planes[plane].length, + write, vb_plane->mem_priv); + if (IS_ERR(mem_priv)) { + dprintk(1, "Buffer %d plane %d failed "\ + "to attach dmabuf\n", buffer, plane); + dma_buf_put(dbuf); + continue; + } + + vb_plane->dbuf = dbuf; + vb->v4l2_planes[plane].m.fd = fd; + + dprintk(3, "Buffer %d, plane %d fd %x\n", + buffer, plane, fd); + } + } +} + +/** * __vb2_queue_alloc() - allocate videobuf buffer structures and (for MMAP type) * video buffer memory for all buffers/planes on the queue and initializes the * queue @@ -369,8 +430,9 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory, vb->v4l2_buf.type = q->type; vb->v4l2_buf.memory = memory; - /* Allocate video buffer memory for the MMAP type */ - if (memory == V4L2_MEMORY_MMAP) { + /* Allocate video buffer memory for the MMAP and DMABUF types */ + if (memory == V4L2_MEMORY_MMAP || + memory == V4L2_MEMORY_DMABUF) { ret = __vb2_buf_mem_alloc(vb); if (ret) { dprintk(1, "failed allocating memory for " @@ -400,6 +462,9 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory, if (memory == V4L2_MEMORY_MMAP) __setup_offsets(q, buffer); + if (memory == V4L2_MEMORY_DMABUF) + __setup_dmabufs(q, buffer); + dprintk(1, "allocated %d buffers, %d plane(s) each\n", buffer, num_planes); @@ -859,7 +924,7 @@ static int __verify_memory_type(struct vb2_queue *q, * to be used during streaming, * 4) allocates internal buffer structures (struct vb2_buffer), according to * the agreed parameters, - * 5) for MMAP memory type, allocates actual video memory, using the + * 5) for MMAP and DMABUF memory types, allocates actual video memory, using the * memory handling/allocation routines provided during queue initialization * * If req->count is 0, all the memory will be freed instead. @@ -885,7 +950,8 @@ static int __reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) * are not in use and can be freed. */ mutex_lock(&q->mmap_lock); - if (q->memory == V4L2_MEMORY_MMAP && __buffers_in_use(q)) { + if ((q->memory == V4L2_MEMORY_MMAP || + q->memory == V4L2_MEMORY_DMABUF) && __buffers_in_use(q)) { mutex_unlock(&q->mmap_lock); dprintk(1, "memory in use, cannot free\n"); return -EBUSY; @@ -1540,7 +1606,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const struct v4l2_buffer *b) /* Acquire each plane's memory */ mem_priv = call_ptr_memop(vb, attach_dmabuf, q->alloc_ctx[plane], - dbuf, planes[plane].length, dma_dir); + dbuf, planes[plane].length, dma_dir, NULL); if (IS_ERR(mem_priv)) { dprintk(1, "failed to attach dmabuf\n"); ret = PTR_ERR(mem_priv); diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index b481d20..8dc945e 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -793,7 +793,7 @@ static void vb2_dc_detach_dmabuf(void *mem_priv) struct vb2_dc_buf *buf = mem_priv; /* if vb2 works correctly you should never detach mapped buffer */ - if (WARN_ON(buf->dma_addr)) + if (WARN_ON(buf->dma_sgt)) vb2_dc_unmap_dmabuf(buf); /* detach this attachment */ @@ -802,16 +802,18 @@ static void vb2_dc_detach_dmabuf(void *mem_priv) } static void *vb2_dc_attach_dmabuf(void *alloc_ctx, struct dma_buf *dbuf, - unsigned long size, enum dma_data_direction dma_dir) + unsigned long size, enum dma_data_direction dma_dir, void *buf_priv) { struct vb2_dc_conf *conf = alloc_ctx; - struct vb2_dc_buf *buf; + struct vb2_dc_buf *buf = buf_priv; struct dma_buf_attachment *dba; if (dbuf->size < size) return ERR_PTR(-EFAULT); - buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) return ERR_PTR(-ENOMEM); diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c index b1838ab..b9855fd 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c @@ -667,16 +667,18 @@ static void vb2_dma_sg_detach_dmabuf(void *mem_priv) } static void *vb2_dma_sg_attach_dmabuf(void *alloc_ctx, struct dma_buf *dbuf, - unsigned long size, enum dma_data_direction dma_dir) + unsigned long size, enum dma_data_direction dma_dir, void *buf_priv) { struct vb2_dma_sg_conf *conf = alloc_ctx; - struct vb2_dma_sg_buf *buf; + struct vb2_dma_sg_buf *buf = buf_priv; struct dma_buf_attachment *dba; if (dbuf->size < size) return ERR_PTR(-EFAULT); - buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) return ERR_PTR(-ENOMEM); diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c index bcde885..373294c 100644 --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c @@ -416,14 +416,16 @@ static void vb2_vmalloc_detach_dmabuf(void *mem_priv) } static void *vb2_vmalloc_attach_dmabuf(void *alloc_ctx, struct dma_buf *dbuf, - unsigned long size, enum dma_data_direction dma_dir) + unsigned long size, enum dma_data_direction dma_dir, void *buf_priv) { - struct vb2_vmalloc_buf *buf; + struct vb2_vmalloc_buf *buf = buf_priv; if (dbuf->size < size) return ERR_PTR(-EFAULT); - buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) return ERR_PTR(-ENOMEM); diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index a5790fd..374b26b 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -49,6 +49,8 @@ struct vb2_threadio_data; * used for DMABUF memory types; alloc_ctx is the alloc context * dbuf is the shared dma_buf; returns NULL on failure; * allocator private per-buffer structure on success; + * if private per-buffer structure is provided reuse it + * instead of allocating a new one. * this needs to be used for further accesses to the buffer. * @detach_dmabuf: inform the exporter of the buffer that the current DMABUF * buffer is no longer used; the buf_priv argument is the @@ -98,7 +100,8 @@ struct vb2_mem_ops { void *(*attach_dmabuf)(void *alloc_ctx, struct dma_buf *dbuf, unsigned long size, - enum dma_data_direction dma_dir); + enum dma_data_direction dma_dir, + void *buf_priv); void (*detach_dmabuf)(void *buf_priv); int (*map_dmabuf)(void *buf_priv); void (*unmap_dmabuf)(void *buf_priv); -- 1.9.1

7 years, 10 months

[PATCH v8 00/11] Add DRM for stih4xx platforms

by Benjamin Gaignard

This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. version 8: - Allow driver to be build as kernel module. - Use Universal Plane instead of legacy code. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v8 version 7: - rebased on top of drm-next (2014-07-24) patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v7 version 6: - rebased on top of new component framework API. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v6 version 5: - Rework sti_drm_drv probes functions to support deferred probe. This allow hdmi to delayed framebuffer creation until I2C is available. - Add ops functions in sti_layer structure to simpify GDP and VID code. - Add NOTES file to describe how the DRM concepts are mapped on hardware. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v5 version 4: - Remove depency between TVout it subdevices HDMI and HDA - Rework and simplify VTG and VTAC code - Fix numbers of typo and indentation - Remove debug (will be push in separate patches) - Fix remarks done in previous patcheset patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v4 version 3: - Correctly split code between probe and bind funtions - Squash some commits - remove HQ-VDP device code to have a smaller patcheset, we will introduce it later. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v3 version 2: - Use componentized device instead of register sub-devices in master driver probe function - Fix Makefile and Kconfig to only allow built-in compilation patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v2 version 1: - First path submission Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. Benjamin Gaignard (11): drm: sti: add bindings for DRM driver drm: sti: add VTG driver drm: sti: add VTAC drivers drm: sti: add HDMI driver drm: sti: add HDA driver drm: sti: add TVOut driver drm: sti: add GDP layer drm: sti: add VID layer drm: sti: add Mixer drm: sti: add Compositor drm: sti: Add DRM driver itself .../devicetree/bindings/gpu/st,stih4xx.txt | 189 +++++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sti/Kconfig | 14 + drivers/gpu/drm/sti/Makefile | 21 + drivers/gpu/drm/sti/NOTES | 58 ++ drivers/gpu/drm/sti/sti_compositor.c | 279 +++++++ drivers/gpu/drm/sti/sti_compositor.h | 90 +++ drivers/gpu/drm/sti/sti_drm_crtc.c | 423 +++++++++++ drivers/gpu/drm/sti/sti_drm_crtc.h | 22 + drivers/gpu/drm/sti/sti_drm_drv.c | 241 ++++++ drivers/gpu/drm/sti/sti_drm_drv.h | 29 + drivers/gpu/drm/sti/sti_drm_plane.c | 195 +++++ drivers/gpu/drm/sti/sti_drm_plane.h | 18 + drivers/gpu/drm/sti/sti_gdp.c | 549 ++++++++++++++ drivers/gpu/drm/sti/sti_gdp.h | 16 + drivers/gpu/drm/sti/sti_hda.c | 794 ++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.c | 810 +++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.h | 88 +++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 +++++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 + drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 + drivers/gpu/drm/sti/sti_layer.c | 197 +++++ drivers/gpu/drm/sti/sti_layer.h | 123 ++++ drivers/gpu/drm/sti/sti_mixer.c | 249 +++++++ drivers/gpu/drm/sti/sti_mixer.h | 54 ++ drivers/gpu/drm/sti/sti_tvout.c | 648 +++++++++++++++++ drivers/gpu/drm/sti/sti_vid.c | 138 ++++ drivers/gpu/drm/sti/sti_vid.h | 12 + drivers/gpu/drm/sti/sti_vtac.c | 215 ++++++ drivers/gpu/drm/sti/sti_vtg.c | 366 ++++++++++ drivers/gpu/drm/sti/sti_vtg.h | 28 + 33 files changed, 6444 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt create mode 100644 drivers/gpu/drm/sti/Kconfig create mode 100644 drivers/gpu/drm/sti/Makefile create mode 100644 drivers/gpu/drm/sti/NOTES create mode 100644 drivers/gpu/drm/sti/sti_compositor.c create mode 100644 drivers/gpu/drm/sti/sti_compositor.h create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h create mode 100644 drivers/gpu/drm/sti/sti_gdp.c create mode 100644 drivers/gpu/drm/sti/sti_gdp.h create mode 100644 drivers/gpu/drm/sti/sti_hda.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h create mode 100644 drivers/gpu/drm/sti/sti_layer.c create mode 100644 drivers/gpu/drm/sti/sti_layer.h create mode 100644 drivers/gpu/drm/sti/sti_mixer.c create mode 100644 drivers/gpu/drm/sti/sti_mixer.h create mode 100644 drivers/gpu/drm/sti/sti_tvout.c create mode 100644 drivers/gpu/drm/sti/sti_vid.c create mode 100644 drivers/gpu/drm/sti/sti_vid.h create mode 100644 drivers/gpu/drm/sti/sti_vtac.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.h -- 1.9.1

8 years, 8 months

[RFC 0/3] Unify IOMMU-based DMA-mapping code for ARM and ARM64

by Marek Szyprowski

Dear All, This is an initial RFC on the unification of IOMMU-based DMA-mapping code for ARM and ARM64 architectures. Right now ARM architecture still use my old code for IOMMU-based DMA-mapping glue, initially merged in commit 4ce63fcd919c32d22528e54dcd89506962933719 ("ARM: dma-mapping: add support for IOMMU mapper"). In meantime ARM64 got a new, slightly improved implementation provided by Robin Murphy in commit 13b8629f651164d71f4d38b821925f93ba4236c8 ("arm64: Add IOMMU dma_ops"). Both implementations are very similar thus their unification is desired to avoid duplicating future works and simplify code, which uses this layer on both architectures. In this patchset I've selected the new implementation (from ARM64 architecture) as a base. This means that ARM-specific, old interface (arm_iommu_* functions) for configuring IOMMU domains will be no longer available and its users have to be converted to new API. Besides lack of old interface, the second difference is additional requirements for IOMMU drivers. New code relies on the support for IOMMU_DOMAIN_DMA and default IOMMU domain, which is automatically attached by the IOMMU core. The new code also assumes that the IOMMU-based DMA-mapping ops are mainly configured from arch_setup_dma_ops() function, which means that the IOMMU driver should provide needed of_xlate callbacks and initialize IOMMU ops for device nodes. However it should be also possible to initialize IOMMU-based DMA-mapping ops for client devices directly from IOMMU drivers by calling common_iommu_setup_dma_ops() (some drivers used such approach). IOMMU drivers should be also aware of the fact that the default domain is attached via device_attach and then device_attach callback can be called once again with different domain without previous detach from default domain. For more information on this issue, see the following thread: https://lists.linaro.org/pipermail/linaro-mm-sig/2016-February/004625.html Currently there are 4 users of the old arm_iommu_* interface: 1. Exynos DRM driver 2. Rockchip DRM driver 3. OMAP3 ISP camera driver 4. Renesas VMSA-compatible IPMMU driver In this patchset I've converted Exynos DRM driver for the new API (patch 1). This required some changes in the memory management model inside the driver and removal of some hacks, which were used to setup IOMMU-based DMA-mapping ops on the 'exynos-drm' virtual device and common IOMMU domain for all Exynos DRM sub-devices, those changes have been posted separately here: http://www.spinics.net/lists/dri-devel/msg100861.html Rockchip DRM driver requires similar conversion. Converting OMAP3 ISP camera driver to new API requires adding support for IOMMU groups to OMAP IOMMU driver, because the new DMA/IOMMU code used IOMMU_DOMAIN_DMA type domains and default groups. Renesas IPMMU driver needs also to be extended with IOMMU_DOMAIN_DMA domain type support. It can also be prepared for IOMMU_OF_DECLARE and of_xlate callback-based initialization to let core to automatically setup of IOMMU-based DMA mapping implementation. Patch 2 moves existing code from arch/arm64 to drivers/iommu and introduces some minor changes in function names - mainly adding arch_ prefix to some dma-mapping internal functions, which stay in arch/arm64/ (functions of similar names are present in arch/arm). Patch 3 adapts ARM architecture for the common code. I would like to get your comments on the proposed approach. There is still some work that need to be done to convert remaining users of the old API and updating IOMMU drivers to the new API requirements. This change need to be tested on the all affected ARM sub-architectures. Right now patches were tested on only Exynos based boards: ARM 32bit: Exynos4412 and Exynos5422 boards and ARM 64 bit Exnyos 5433 (with some out-of-tree DTS). To ease testing I've prepared a branch with all the patches needed (there are all needed patches for Exynos subarch, which have been posted as separate patchsets): https://git.linaro.org/people/marek.szyprowski/linux-srpol.git v4.5-dma-iommu-unification Patches are based on Linux v4.5-rc4 vanilla tree. Best regards Marek Szyprowski Samsung R&D Institute Poland Patch summary: Marek Szyprowski (3): drm/exynos: rewrite IOMMU support code iommu: dma-iommu: move IOMMU/DMA-mapping code from ARM64 arch to drivers iommu: dma-iommu: use common implementation also on ARM architecture arch/arm/Kconfig | 22 +- arch/arm/include/asm/device.h | 9 - arch/arm/include/asm/dma-iommu.h | 37 - arch/arm/include/asm/dma-mapping.h | 59 +- arch/arm/mm/dma-mapping.c | 1158 +---------------------------- arch/arm64/include/asm/dma-mapping.h | 39 +- arch/arm64/mm/dma-mapping.c | 491 +----------- drivers/gpu/drm/exynos/Kconfig | 2 +- drivers/gpu/drm/exynos/exynos_drm_drv.c | 7 +- drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 +- drivers/gpu/drm/exynos/exynos_drm_iommu.c | 91 ++- drivers/gpu/drm/exynos/exynos_drm_iommu.h | 2 +- drivers/gpu/drm/rockchip/Kconfig | 1 + drivers/iommu/Kconfig | 1 + drivers/iommu/Makefile | 2 +- drivers/iommu/dma-iommu-ops.c | 471 ++++++++++++ drivers/media/platform/Kconfig | 1 + include/linux/dma-iommu.h | 14 + 18 files changed, 679 insertions(+), 1730 deletions(-) delete mode 100644 arch/arm/include/asm/dma-iommu.h create mode 100644 drivers/iommu/dma-iommu-ops.c -- 1.9.2

8 years, 8 months

Re: [Linaro-mm-sig] [RESEND] fence: add missing descriptions for fence

by Sumit Semwal

Hi Luis, On 12 April 2016 at 04:03, Luis de Bethencourt <luisbg(a)osg.samsung.com> wrote: > On 11/04/16 21:09, Gustavo Padovan wrote: >> Hi Luis, >> >> 2016-04-11 Luis de Bethencourt <luisbg(a)osg.samsung.com>: >> >>> The members child_list and active_list were added to the fence struct >>> without descriptions for the Documentation. Adding these. >>> Thanks for the patch; will get it queued for for-next. >>> Fixes: b55b54b5db33 ("staging/android: remove struct sync_pt") >>> Signed-off-by: Luis de Bethencourt <luisbg(a)osg.samsung.com> >>> Reviewed-by: Javier Martinez Canillas <javier(a)osg.samsung.com> >>> --- >>> Hi, >>> >>> Just resending this patch since it hasn't had any reviews in since >>> March 21st. >>> >>> Thanks, >>> Luis >>> >>> include/linux/fence.h | 2 ++ >>> 1 file changed, 2 insertions(+) >> >> Reviewed-by: Gustavo Padovan <gustavo.padovan(a)collabora.co.uk> >> >> Gustavo >> > > Thank you Gustavo. > > Nice seeing you around here :) > > Luis BR, Sumit.

8 years, 8 months

Re: [Linaro-mm-sig] [RESEND] fence: add missing descriptions for fence

by Gustavo Padovan

Hi Luis, 2016-04-11 Luis de Bethencourt <luisbg(a)osg.samsung.com>: > The members child_list and active_list were added to the fence struct > without descriptions for the Documentation. Adding these. > > Fixes: b55b54b5db33 ("staging/android: remove struct sync_pt") > Signed-off-by: Luis de Bethencourt <luisbg(a)osg.samsung.com> > Reviewed-by: Javier Martinez Canillas <javier(a)osg.samsung.com> > --- > Hi, > > Just resending this patch since it hasn't had any reviews in since > March 21st. > > Thanks, > Luis > > include/linux/fence.h | 2 ++ > 1 file changed, 2 insertions(+) Reviewed-by: Gustavo Padovan <gustavo.padovan(a)collabora.co.uk> Gustavo

8 years, 8 months

[PATCH 0/2] drm: add generic zpos property

by Benjamin Gaignard

The original patches have been done by Marek: https://lists.freedesktop.org/archives/dri-devel/2016-January/099572.html I have just adapt them to make zpos depend on plane and no more on drm core. Since zpos range can be define per plane normalize function takes care of the min and max before compute normalized zpos value. Benjamin Gaignard (2): drm: add generic zpos property drm: sti: use generic zpos for plane Documentation/DocBook/gpu.tmpl | 10 ++ drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 4 + drivers/gpu/drm/drm_atomic_helper.c | 6 + drivers/gpu/drm/drm_blend.c | 242 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 3 + drivers/gpu/drm/sti/sti_mixer.c | 2 +- drivers/gpu/drm/sti/sti_plane.c | 82 +++++------- drivers/gpu/drm/sti/sti_plane.h | 2 - include/drm/drm_crtc.h | 17 +++ 10 files changed, 314 insertions(+), 56 deletions(-) create mode 100644 drivers/gpu/drm/drm_blend.c -- 1.9.1

8 years, 8 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig April 2016