Linaro-mm-sig November 2025

linaro-mm-sig@lists.linaro.org

17 participants
84 discussions

Re: [PATCH 0/6] dma-fence: Remove return code of dma_fence_signal() et al.

by Christian König

On 11/26/25 14:19, Philipp Stanner wrote: > Barely anyone uses dma_fence_signal()'s (and similar functions') return > code. Checking it is pretty much useless anyways, because what are you > going to do if a fence was already signal it? Unsignal it and signal it > again? ;p Reviewed-by: Christian König <christian.koenig(a)amd.com> for the entire series. Please push to drm-misc-next or leave me a note when I should pick it up. > Removing the return code simplifies the API and makes it easier for me > to sit on top with Rust DmaFence. BTW, I have an rb for embedding the lock and I'm now writing test cases. When that is done you should be able to base the Rust DmaFence abstraction on that as well. Regards, Christian. > > Philipp Stanner (6): > dma-buf/dma-fence: Add dma_fence_test_signaled_flag() > amd/amdkfd: Ignore return code of dma_fence_signal() > drm/gpu/xe: Ignore dma_fenc_signal() return code > dma-buf: Don't misuse dma_fence_signal() > drm/ttm: Remove return check of dma_fence_signal() > dma-buf/dma-fence: Remove return code of signaling-functions > > drivers/dma-buf/dma-fence.c | 59 ++++++------------- > drivers/dma-buf/st-dma-fence.c | 7 +-- > drivers/gpu/drm/amd/amdkfd/kfd_process.c | 5 +- > .../gpu/drm/ttm/tests/ttm_bo_validate_test.c | 3 +- > drivers/gpu/drm/xe/xe_hw_fence.c | 5 +- > include/linux/dma-fence.h | 33 ++++++++--- > 6 files changed, 53 insertions(+), 59 deletions(-) >

27 minutes

Re: [PATCH 1/4] dma-buf/fence: give some reasonable maximum signaling timeout

by Christian König

On 11/25/25 11:56, Philipp Stanner wrote: >>>> >>>> The GPU scheduler has a very similar define, MAX_WAIT_SCHED_ENTITY_Q_EMPTY which is currently just 1 second. >>>> >>>> The real question is what is the maximum amount of time we can wait for the HW before we should trigger a timeout? >>> >>> That's a question only the drivers can answer, which is why I like to >>> think that setting global constants constraining all parties is not the >>> right thing to do. >> >> Exactly that's the reason why I bring that up. I think that drivers should be in charge of timeouts is the wrong approach. >> >> See the reason why we have the timeout (and documented that it is a must have) is because we have both core memory management as well a desktop responsiveness depend on it. > > Good and well, but then patch 4 becomes even more problematic: > > So we'd just have drivers fire warnings, and then they would still have > the freedom to set timeouts for drm/sched, as long as those timeouts > are smaller than your new global constant. > > Why then not remove drm/sched's timeout parameter API completely and > always use your maximum value internally in drm/sched? Or maybe > truncate it with a warning? I have considered that as well, but then thought that we should at least give end users the possibility to override the timeout while still tainting the kernel so that we know about this in bug reports, core dumps etc... > "Maximum timeout parameter exceeded, truncating to %ld.\n" > > I suppose some drivers want even higher responsiveness than those 2 > seconds. As far as I know some medical use cases for example have timeouts like 100-200ms. But again that is the use case and not the driver. > I do believe that more of the driver folks should be made aware of this > intended change. I have no real intention of actually pushing those patches, at least not as they are. I just wanted to kick of some discussion. >> >>> What is even your motivation? What problem does this solve? Is the OOM >>> killer currently hanging for anyone? Can you link a bug report? >> >> I'm not sure if we have an external bug report (we have an internal one), but for amdgpu there were customer complains that 10 seconds is to long. >> >> So we changed it to 2 seconds for amdgpu, and now there are complains from internal AMD teams that 2 seconds is to short. >> >> While working on that I realized that the timeout is actually not driver dependent at all. >> >> What can maybe argued is that a desktop system should have a shorter timeout than some server, but that one driver needs a different timeout than another driver doesn't really makes sense to me. >> >> I mean what is actually HW dependent on the requirement that I need a responsive desktop system? > > I suppose some drivers are indeed only used for server hardware. And > for compute you might not care about responsiveness as long as your > result drops off at some point. But there's cloud gaming, too.. Good point with the cloud gaming. > I agree that distinguishing the use case that way is not ideal. > However, who has the knowledge of how the hardware is being used by > customers / users, if not the driver? Well the end user. Maybe we should move the whole timeout topic into the DRM layer or the scheduler component. Something like 2 seconds default (which BTW is the default on Windows as well), which can be overridden on a global, per device, per queue name basis. And 10 seconds maximum with only a warning that a not default timeout is used and everything above 10 seconds taints the kernel and should really only be used for testing/debugging. Thoughts? Regards, Christian. > > > P.

1 hour, 58 minutes

Re: [PATCH] dma-buf: fix integer overflow in fill_sg_entry() for buffers >= 8GiB

by Leon Romanovsky

On Tue, Nov 25, 2025 at 05:11:18PM -0800, Alex Mastro wrote: > fill_sg_entry() splits large DMA buffers into multiple scatter-gather > entries, each holding up to UINT_MAX bytes. When calculating the DMA > address for entries beyond the second one, the expression (i * UINT_MAX) > causes integer overflow due to 32-bit arithmetic. > > This manifests when the input arg length >= 8 GiB results in looping for > i >= 2. > > Fix by casting i to dma_addr_t before multiplication. > > Fixes: 3aa31a8bb11e ("dma-buf: provide phys_vec to scatter-gather mapping routine") > Signed-off-by: Alex Mastro <amastro(a)fb.com> > --- > More color about how I discovered this in [1] for the commit at [2]: > > [1] https://lore.kernel.org/all/aSZHO6otK0Heh+Qj@devgpu015.cco6.facebook.com > [2] https://lore.kernel.org/all/20251120-dmabuf-vfio-v9-6-d7f71607f371@nvidia.c… > --- > drivers/dma-buf/dma-buf-mapping.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > Thanks, Reviewed-by: Leon Romanovsky <leon(a)kernel.org>

7 hours, 11 minutes

Re: [PATCH v2] dma-buf: add some tracepoints to debug.

by Steven Rostedt

On Wed, 26 Nov 2025 00:29:49 +0800 Xiang Gao <gxxa03070307(a)gmail.com> wrote: > +++ b/include/trace/events/dma_buf.h > @@ -0,0 +1,281 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#undef TRACE_SYSTEM > +#define TRACE_SYSTEM dma_buf > + > +#if !defined(_TRACE_DMA_BUF_H) || defined(TRACE_HEADER_MULTI_READ) > +#define _TRACE_DMA_BUF_H > + > +#include <linux/dma-buf.h> > +#include <linux/tracepoint.h> > + > +TRACE_EVENT(dma_buf_export, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); The above isn't doing what you think it's doing. The name is assigned before this by the above __string(name, dmabuf->name). You really shouldn't be taking any locks in a tracepoint. A tracepoint is a callback, that isn't called most of the time. You could be hiding very hard to find deadlocks by taking a lock in a tracepoint callback. You need to take the lock around the tracepoint call itself where it is called in the code. Not in the TRACE_EVENT. You may need to have something like: @@ -220,6 +223,8 @@ static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma) dmabuf->size >> PAGE_SHIFT) return -EINVAL; + if (trace_dma_buf_mmap_internal_enabled()) { + guard(spinlock)(&dmabuf->namelock); + trace_dma_buf_mmap_internal(dmabuf); + } + return dmabuf->ops->mmap(dmabuf, vma); } The "trace_dma_buf_mmap_internal_enabled()" is a static branch, where it is either a nop or a jump to the tracing code. It's not a normal conditional branch. It acts the same as tracepoints themselves do. > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); Below seems to be a lot of very similar TRACE_EVENT()s. A TRACE_EVENT() is literally defined as: #define TRACE_EVENT(name, proto, args, tstruct, assign, print) \ DECLARE_EVENT_CLASS(name, \ PARAMS(proto), \ PARAMS(args), \ PARAMS(tstruct), \ PARAMS(assign), \ PARAMS(print)); \ DEFINE_EVENT(name, name, PARAMS(proto), PARAMS(args)); That is, it is both a DECLARE_EVENT_CLASS() and a DEFINE_EVENT(). You can make one DECLARE_EVENT_CLASS() and use many DEFINE_EVENT()s with it. Each DECLARE_EVENT_CLASS() takes up around 4 to 5 kilobytes of memory. Each DEFINE_EVENT() takes around 300 bytes to 1K of memory. The more DEFINE_EVENT()s you use with a single DECLARE_EVENT_CLASS(), the more memory you save. Please try to do that. -- Steve > + > +TRACE_EVENT(dma_buf_fd, > + > + TP_PROTO(struct dma_buf *dmabuf, int fd), > + > + TP_ARGS(dmabuf, fd), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(int, fd) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->fd = fd; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->fd, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_mmap_internal, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_mmap, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_attach, > + > + TP_PROTO(struct dma_buf *dmabuf, struct device *dev), > + > + TP_ARGS(dmabuf, dev), > + > + TP_STRUCT__entry( > + __string(dname, dev_name(dev)) > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(dname); > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("dev_name=%s exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(dname), > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_detach, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_get, > + > + TP_PROTO(int fd, struct file *file), > + > + TP_ARGS(fd, file), > + > + TP_STRUCT__entry( > + __string(exp_name, ((struct dma_buf *)file->private_data)->exp_name) > + __string(name, ((struct dma_buf *)file->private_data)->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(int, fd) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + struct dma_buf *dmabuf = (struct dma_buf *)file->private_data; > + > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->fd = fd; > + __entry->f_refcnt = file_count(file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->fd, > + __entry->f_refcnt) > +); > + > +TRACE_EVENT(dma_buf_put, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_refcnt) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + spin_lock(&dmabuf->name_lock); > + __assign_str(name); > + spin_unlock(&dmabuf->name_lock); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_refcnt = file_count(dmabuf->file); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_refcnt=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_refcnt) > +); > + > +#endif /* _TRACE_DMA_BUF_H */ > + > +/* This part must be outside protection */ > +#include <trace/define_trace.h>

12 hours, 50 minutes

Re: [RFC v2 00/11] Add dmabuf read/write via io_uring

by Christian König

On 11/25/25 14:52, Pavel Begunkov wrote: > On 11/24/25 14:17, Christian König wrote: >> On 11/24/25 12:30, Pavel Begunkov wrote: >>> On 11/24/25 10:33, Christian König wrote: >>>> On 11/23/25 23:51, Pavel Begunkov wrote: >>>>> Picking up the work on supporting dmabuf in the read/write path. >>>> >>>> IIRC that work was completely stopped because it violated core dma_fence and DMA-buf rules and after some private discussion was considered not doable in general. >>>> >>>> Or am I mixing something up here? >>> >>> The time gap is purely due to me being busy. I wasn't CC'ed to those private >>> discussions you mentioned, but the v1 feedback was to use dynamic attachments >>> and avoid passing dma address arrays directly. >>> >>> https://lore.kernel.org/all/cover.1751035820.git.asml.silence@gmail.com/ >>> >>> I'm lost on what part is not doable. Can you elaborate on the core >>> dma-fence dma-buf rules? >> >> I most likely mixed that up, in other words that was a different discussion. >> >> When you use dma_fences to indicate async completion of events you need to be super duper careful that you only do this for in flight events, have the fence creation in the right order etc... > > I'm curious, what can happen if there is new IO using a > move_notify()ed mapping, but let's say it's guaranteed to complete > strictly before dma_buf_unmap_attachment() and the fence is signaled? > Is there some loss of data or corruption that can happen? The problem is that you can't guarantee that because you run into deadlocks. As soon as a dma_fence() is created and published by calling add_fence it can be memory management loops back and depends on that fence. So you actually can't issue any new IO which might block the unmap operation. > > sg_table = map_attach() | > move_notify() | > -> add_fence(fence) | > | issue_IO(sg_table) > | // IO completed > unmap_attachment(sg_table) | > signal_fence(fence) | > >> For example once the fence is created you can't make any memory allocations any more, that's why we have this dance of reserving fence slots, creating the fence and then adding it. > > Looks I have some terminology gap here. By "memory allocations" you > don't mean kmalloc, right? I assume it's about new users of the > mapping. kmalloc() as well as get_free_page() is exactly what is meant here. You can't make any memory allocation any more after creating/publishing a dma_fence. The usually flow is the following: 1. Lock dma_resv object 2. Prepare I/O operation, make all memory allocations etc... 3. Allocate dma_fence object 4. Push I/O operation to the HW, making sure that you don't allocate memory any more. 5. Call dma_resv_add_fence(with fence allocate in #3). 6. Unlock dma_resv object If you stride from that you most likely end up in a deadlock sooner or later. Regards, Christian. >>>> Since I don't see any dma_fence implementation at all that might actually be the case. >>> >>> See Patch 5, struct blk_mq_dma_fence. It's used in the move_notify >>> callback and is signaled when all inflight IO using the current >>> mapping are complete. All new IO requests will try to recreate the >>> mapping, and hence potentially wait with dma_resv_wait_timeout(). >> >> Without looking at the code that approach sounds more or less correct to me. >> >>>> On the other hand we have direct I/O from DMA-buf working for quite a while, just not upstream and without io_uring support. >>> >>> Have any reference? >> >> There is a WIP feature in AMDs GPU driver package for ROCm. >> >> But that can't be used as general purpose DMA-buf approach, because it makes use of internal knowledge about how the GPU driver is using the backing store. > > Got it > >> BTW when you use DMA addresses from DMA-buf always keep in mind that this memory can be written by others at the same time, e.g. you can't do things like compute a CRC first, then write to backing store and finally compare CRC. > > Right. The direct IO path also works with user pages, so the > constraints are similar in this regard. >

1 day

Re: [PATCH 1/4] dma-buf/fence: give some reasonable maximum signaling timeout

by Christian König

On 11/25/25 09:13, Philipp Stanner wrote: > On Tue, 2025-11-25 at 09:03 +0100, Christian König wrote: >> On 11/25/25 08:55, Philipp Stanner wrote: >>>> >>>> +/** >>>> + * define DMA_FENCE_MAX_REASONABLE_TIMEOUT - max reasonable signaling timeout >>>> + * >>>> + * The dma_fence object has a deep inter dependency with core memory >>>> + * management, for a detailed explanation see section DMA Fences under >>>> + * Documentation/driver-api/dma-buf.rst. >>>> + * >>>> + * Because of this all dma_fence implementations must guarantee that each fence >>>> + * completes in a finite time. This define here now gives a reasonable value for >>>> + * the timeout to use. It is possible to use a longer timeout in an >>>> + * implementation but that should taint the kernel. >>>> + */ >>>> +#define DMA_FENCE_MAX_REASONABLE_TIMEOUT (2*HZ) >>> >>> HZ can change depending on the config. Is that really a good choice? I >>> could see racy situations arising in some configs vs others >> >> 2*HZ is always two seconds expressed in number of jiffies, I can use msecs_to_jiffies(2000) to make that more obvious. > > On AMD64 maybe. What about the other architectures? HZ is defined as jiffies per second, So even if it changes to 10,100 or 1000 depending on the architecture 2*HZ is always two seconds expressed in jiffies. The HZ define is actually there to make it architecture independent. >> >> The GPU scheduler has a very similar define, MAX_WAIT_SCHED_ENTITY_Q_EMPTY which is currently just 1 second. >> >> The real question is what is the maximum amount of time we can wait for the HW before we should trigger a timeout? > > That's a question only the drivers can answer, which is why I like to > think that setting global constants constraining all parties is not the > right thing to do. Exactly that's the reason why I bring that up. I think that drivers should be in charge of timeouts is the wrong approach. See the reason why we have the timeout (and documented that it is a must have) is because we have both core memory management as well a desktop responsiveness depend on it. > What is even your motivation? What problem does this solve? Is the OOM > killer currently hanging for anyone? Can you link a bug report? I'm not sure if we have an external bug report (we have an internal one), but for amdgpu there were customer complains that 10 seconds is to long. So we changed it to 2 seconds for amdgpu, and now there are complains from internal AMD teams that 2 seconds is to short. While working on that I realized that the timeout is actually not driver dependent at all. What can maybe argued is that a desktop system should have a shorter timeout than some server, but that one driver needs a different timeout than another driver doesn't really makes sense to me. I mean what is actually HW dependent on the requirement that I need a responsive desktop system? >> >> Some AMD internal team is pushing for 10 seconds, but that also means that for example we wait 10 seconds for the OOM killer to do something. That sounds like way to long. >> > > Nouveau has timeout = 10 seconds. AFAIK we've never seen bugs because > of that. Have you seen some? Thanks for that info. And to answer the question, yes certainly. Regards, Christian. > > > P.

1 day, 5 hours

Re: [PATCH 1/4] dma-buf/fence: give some reasonable maximum signaling timeout

by Christian König

On 11/25/25 08:55, Philipp Stanner wrote: > On Thu, 2025-11-20 at 15:41 +0100, Christian König wrote: >> Add a define implementations can use as reasonable maximum signaling >> timeout. Document that if this timeout is exceeded by config options >> implementations should taint the kernel. >> >> Tainting the kernel is important for bug reports to detect that end >> users might be using a problematic configuration. >> >> Signed-off-by: Christian König <christian.koenig(a)amd.com> >> --- >> include/linux/dma-fence.h | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) >> >> diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h >> index 64639e104110..b31dfa501c84 100644 >> --- a/include/linux/dma-fence.h >> +++ b/include/linux/dma-fence.h >> @@ -28,6 +28,20 @@ struct dma_fence_ops; >> struct dma_fence_cb; >> struct seq_file; >> >> +/** >> + * define DMA_FENCE_MAX_REASONABLE_TIMEOUT - max reasonable signaling timeout >> + * >> + * The dma_fence object has a deep inter dependency with core memory >> + * management, for a detailed explanation see section DMA Fences under >> + * Documentation/driver-api/dma-buf.rst. >> + * >> + * Because of this all dma_fence implementations must guarantee that each fence >> + * completes in a finite time. This define here now gives a reasonable value for >> + * the timeout to use. It is possible to use a longer timeout in an >> + * implementation but that should taint the kernel. >> + */ >> +#define DMA_FENCE_MAX_REASONABLE_TIMEOUT (2*HZ) > > HZ can change depending on the config. Is that really a good choice? I > could see racy situations arising in some configs vs others 2*HZ is always two seconds expressed in number of jiffies, I can use msecs_to_jiffies(2000) to make that more obvious. The GPU scheduler has a very similar define, MAX_WAIT_SCHED_ENTITY_Q_EMPTY which is currently just 1 second. The real question is what is the maximum amount of time we can wait for the HW before we should trigger a timeout? Some AMD internal team is pushing for 10 seconds, but that also means that for example we wait 10 seconds for the OOM killer to do something. That sounds like way to long. Regards, Christian. > > P.

1 day, 6 hours

Re: 答复: [External Mail]Re: [PATCH] dma-buf: add some tracepoints to debug.

by Christian König

On 11/25/25 03:01, 高翔 wrote: >> In general quite nice to have, but this needs a bit more explanation why you need it. > > I want to track the status of dmabuf in real time in the production environment. Please add that to the commit message. > >> I have strongly doubts that this is your legal name :) >> Please google the requirements for a Signed-off-by line. > That's my real name, gaoxiang. However, there are quite a few people with the same name in the company, and I rank 17th. It doesn't matter what your eMail address is, but the name in a Signed-off-by must be your legal name. In other words the same what you would use on a contract, usually including first and last name. It could be that gaoxiang is perfectly fine in your restrication, but the number 17 certainly looks odd. > And the previous patches all used this name. > >> dmabuf->name can't be accessed without holding the appropriate lock, same of all other cases. > ok, thanks. It can be accessed with holding dmabuf->name_lock. That should work, yes. Regards, Christian. > > > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > *发件人:* Christian König <christian.koenig(a)amd.com> > *发送时间:* 2025年11月24日 22:21:57 > *收件人:* Xiang Gao; sumit.semwal(a)linaro.org; rostedt(a)goodmis.org; mhiramat(a)kernel.org > *抄送:* linux-media(a)vger.kernel.org; dri-devel(a)lists.freedesktop.org; linaro-mm-sig(a)lists.linaro.org; linux-kernel(a)vger.kernel.org; mathieu.desnoyers(a)efficios.com; dhowells(a)redhat.com; kuba(a)kernel.org; brauner(a)kernel.org; akpm(a)linux-foundation.org; linux-trace-kernel(a)vger.kernel.org; 高翔 > *主题:* [External Mail]Re: [PATCH] dma-buf: add some tracepoints to debug. > > [外部邮件] 此邮件来源于小米公司外部，请谨慎处理。若对邮件安全性存疑，请将邮件转发给misec(a)xiaomi.xn--com-iw3ew31vyqjqpq > > On 11/24/25 14:36, Xiang Gao wrote: >> From: gaoxiang17 <gaoxiang17(a)xiaomi.com> >> >> With these tracepoints, we can track dmabuf in real time. >> >> For example: >> binder:3025_3-10524 [000] ..... 553.310313: dma_buf_export: exp_name=qcom,system name=(null) size=12771328 ino=2799 >> binder:3025_3-10524 [000] ..... 553.310318: dma_buf_fd: exp_name=qcom,system name=(null) size=12771328 ino=2799 fd=8 >> RenderThread-9307 [000] ..... 553.310869: dma_buf_get: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 fd=673 f_ref=4 >> RenderThread-9307 [000] ..... 553.310871: dma_buf_attach: dev_name=kgsl-3d0 exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 >> RenderThread-9307 [000] ..... 553.310946: dma_buf_mmap_internal: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 >> RenderThread-9307 [004] ..... 553.315084: dma_buf_detach: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 >> RenderThread-9307 [004] ..... 553.315084: dma_buf_put: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 f_ref=5 > > In general quite nice to have, but this needs a bit more explanation why you need it. > >> >> Signed-off-by: gaoxiang17 <gaoxiang17(a)xiaomi.com> > > I have strongly doubts that this is your legal name :) > > Please google the requirements for a Signed-off-by line. > >> --- >> drivers/dma-buf/dma-buf.c | 19 +++ >> include/trace/events/dma_buf.h | 245 +++++++++++++++++++++++++++++++++ >> 2 files changed, 264 insertions(+) >> create mode 100644 include/trace/events/dma_buf.h >> >> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c >> index 2bcf9ceca997..8b5af73f0218 100644 >> --- a/drivers/dma-buf/dma-buf.c >> +++ b/drivers/dma-buf/dma-buf.c >> @@ -35,6 +35,9 @@ >> >> #include "dma-buf-sysfs-stats.h" >> >> +#define CREATE_TRACE_POINTS >> +#include <trace/events/dma_buf.h> >> + >> static inline int is_dma_buf_file(struct file *); >> >> static DEFINE_MUTEX(dmabuf_list_mutex); >> @@ -220,6 +223,8 @@ static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma) >> dmabuf->size >> PAGE_SHIFT) >> return -EINVAL; >> >> + trace_dma_buf_mmap_internal(dmabuf); >> + >> return dmabuf->ops->mmap(dmabuf, vma); >> } >> >> @@ -745,6 +750,8 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) >> >> __dma_buf_list_add(dmabuf); >> >> + trace_dma_buf_export(dmabuf); >> + >> return dmabuf; >> >> err_dmabuf: >> @@ -779,6 +786,8 @@ int dma_buf_fd(struct dma_buf *dmabuf, int flags) >> >> fd_install(fd, dmabuf->file); >> >> + trace_dma_buf_fd(dmabuf, fd); >> + >> return fd; >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_fd, "DMA_BUF"); >> @@ -805,6 +814,8 @@ struct dma_buf *dma_buf_get(int fd) >> return ERR_PTR(-EINVAL); >> } >> >> + trace_dma_buf_get(fd, file); >> + >> return file->private_data; >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_get, "DMA_BUF"); >> @@ -825,6 +836,8 @@ void dma_buf_put(struct dma_buf *dmabuf) >> return; >> >> fput(dmabuf->file); >> + >> + trace_dma_buf_put(dmabuf); >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_put, "DMA_BUF"); >> >> @@ -998,6 +1011,8 @@ EXPORT_SYMBOL_NS_GPL(dma_buf_dynamic_attach, "DMA_BUF"); >> struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, >> struct device *dev) >> { >> + trace_dma_buf_attach(dmabuf, dev); >> + >> return dma_buf_dynamic_attach(dmabuf, dev, NULL, NULL); >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_attach, "DMA_BUF"); >> @@ -1024,6 +1039,8 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) >> dmabuf->ops->detach(dmabuf, attach); >> >> kfree(attach); >> + >> + trace_dma_buf_detach(dmabuf); >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_detach, "DMA_BUF"); >> >> @@ -1488,6 +1505,8 @@ int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma, >> vma_set_file(vma, dmabuf->file); >> vma->vm_pgoff = pgoff; >> >> + trace_dma_buf_mmap(dmabuf); >> + >> return dmabuf->ops->mmap(dmabuf, vma); >> } >> EXPORT_SYMBOL_NS_GPL(dma_buf_mmap, "DMA_BUF"); >> diff --git a/include/trace/events/dma_buf.h b/include/trace/events/dma_buf.h >> new file mode 100644 >> index 000000000000..796ae444f6ae >> --- /dev/null >> +++ b/include/trace/events/dma_buf.h >> @@ -0,0 +1,245 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#undef TRACE_SYSTEM >> +#define TRACE_SYSTEM dma_buf >> + >> +#if !defined(_TRACE_DMA_BUF_H) || defined(TRACE_HEADER_MULTI_READ) >> +#define _TRACE_DMA_BUF_H >> + >> +#include <linux/dma-buf.h> >> +#include <linux/tracepoint.h> >> + >> +TRACE_EVENT(dma_buf_export, >> + >> + TP_PROTO(struct dma_buf *dmabuf), >> + >> + TP_ARGS(dmabuf), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) > > dmabuf->name can't be accessed without holding the appropriate lock, same of all other cases. > > Regards, > Christian. > >> + __field(size_t, size) >> + __field(ino_t, ino) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino) >> +); >> + >> +TRACE_EVENT(dma_buf_fd, >> + >> + TP_PROTO(struct dma_buf *dmabuf, int fd), >> + >> + TP_ARGS(dmabuf, fd), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + __field(int, fd) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + __entry->fd = fd; >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino, >> + __entry->fd) >> +); >> + >> +TRACE_EVENT(dma_buf_mmap_internal, >> + >> + TP_PROTO(struct dma_buf *dmabuf), >> + >> + TP_ARGS(dmabuf), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino) >> +); >> + >> +TRACE_EVENT(dma_buf_mmap, >> + >> + TP_PROTO(struct dma_buf *dmabuf), >> + >> + TP_ARGS(dmabuf), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino) >> +); >> + >> +TRACE_EVENT(dma_buf_attach, >> + >> + TP_PROTO(struct dma_buf *dmabuf, struct device *dev), >> + >> + TP_ARGS(dmabuf, dev), >> + >> + TP_STRUCT__entry( >> + __string(dname, dev_name(dev)) >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(dname); >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + ), >> + >> + TP_printk("dev_name=%s exp_name=%s name=%s size=%zu ino=%lu", >> + __get_str(dname), >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino) >> +); >> + >> +TRACE_EVENT(dma_buf_detach, >> + >> + TP_PROTO(struct dma_buf *dmabuf), >> + >> + TP_ARGS(dmabuf), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino) >> +); >> + >> +TRACE_EVENT(dma_buf_get, >> + >> + TP_PROTO(int fd, struct file *file), >> + >> + TP_ARGS(fd, file), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, ((struct dma_buf *)file->private_data)->exp_name) >> + __string(name, ((struct dma_buf *)file->private_data)->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + __field(int, fd) >> + __field(long, f_ref) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = ((struct dma_buf *)file->private_data)->size; >> + __entry->ino = ((struct dma_buf *)file->private_data)->file->f_inode->i_ino; >> + __entry->fd = fd; >> + __entry->f_ref = file_ref_get(&file->f_ref); >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d f_ref=%ld", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino, >> + __entry->fd, >> + __entry->f_ref) >> +); >> + >> +TRACE_EVENT(dma_buf_put, >> + >> + TP_PROTO(struct dma_buf *dmabuf), >> + >> + TP_ARGS(dmabuf), >> + >> + TP_STRUCT__entry( >> + __string(exp_name, dmabuf->exp_name) >> + __string(name, dmabuf->name) >> + __field(size_t, size) >> + __field(ino_t, ino) >> + __field(long, f_ref) >> + ), >> + >> + TP_fast_assign( >> + __assign_str(exp_name); >> + __assign_str(name); >> + __entry->size = dmabuf->size; >> + __entry->ino = dmabuf->file->f_inode->i_ino; >> + __entry->f_ref = file_ref_get(&dmabuf->file->f_ref); >> + ), >> + >> + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_ref=%ld", >> + __get_str(exp_name), >> + __get_str(name), >> + __entry->size, >> + __entry->ino, >> + __entry->f_ref) >> +); >> + >> +#endif /* _TRACE_DMA_BUF_H */ >> + >> +/* This part must be outside protection */ >> +#include <trace/define_trace.h> >

1 day, 6 hours

Reasonable maximum signaling timeout for dma_fences

by Christian König

Hi everybody, we have documented here https://www.kernel.org/doc/html/latest/driver-api/dma-buf.html#dma-fence-cr… that dma_fence objects must signal in a reasonable amount of time, but at the same time note that drivers might have a different idea of what reasonable means. Recently I realized that this is actually not a good idea. Background is that the wall clock timeout means that for example the OOM killer might actually wait for this timeout to be able to terminate a process and reclaim the memory used. And this is just an example of how general kernel features might depend on that. Some drivers and fence implementations used 10 seconds and that raised complains by end users. So at least amdgpu recently switched to 2 second which triggered an internal discussion about it. This patch set here now adds a define to the dma_fence header which gives 2 seconds as reasonable amount of time. SW-sync is modified to always taint the kernel (since it doesn't has a timeout), VGEM is switched over to the new define and the scheduler gets a warning and taints the kernel if a driver uses a timeout longer than that. I have not much intention of actually committing the patches (maybe except the SW-sync one), but question is if 2 seconds are reasonable? Regards, Christian.

1 day, 11 hours

Re: [PATCH] dma-buf: add some tracepoints to debug.

by Christian König

On 11/24/25 14:36, Xiang Gao wrote: > From: gaoxiang17 <gaoxiang17(a)xiaomi.com> > > With these tracepoints, we can track dmabuf in real time. > > For example: > binder:3025_3-10524 [000] ..... 553.310313: dma_buf_export: exp_name=qcom,system name=(null) size=12771328 ino=2799 > binder:3025_3-10524 [000] ..... 553.310318: dma_buf_fd: exp_name=qcom,system name=(null) size=12771328 ino=2799 fd=8 > RenderThread-9307 [000] ..... 553.310869: dma_buf_get: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 fd=673 f_ref=4 > RenderThread-9307 [000] ..... 553.310871: dma_buf_attach: dev_name=kgsl-3d0 exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 > RenderThread-9307 [000] ..... 553.310946: dma_buf_mmap_internal: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 > RenderThread-9307 [004] ..... 553.315084: dma_buf_detach: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 > RenderThread-9307 [004] ..... 553.315084: dma_buf_put: exp_name=qcom,system name=blastBufferQueue for scaleUpDow size=12771328 ino=2799 f_ref=5 In general quite nice to have, but this needs a bit more explanation why you need it. > > Signed-off-by: gaoxiang17 <gaoxiang17(a)xiaomi.com> I have strongly doubts that this is your legal name :) Please google the requirements for a Signed-off-by line. > --- > drivers/dma-buf/dma-buf.c | 19 +++ > include/trace/events/dma_buf.h | 245 +++++++++++++++++++++++++++++++++ > 2 files changed, 264 insertions(+) > create mode 100644 include/trace/events/dma_buf.h > > diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c > index 2bcf9ceca997..8b5af73f0218 100644 > --- a/drivers/dma-buf/dma-buf.c > +++ b/drivers/dma-buf/dma-buf.c > @@ -35,6 +35,9 @@ > > #include "dma-buf-sysfs-stats.h" > > +#define CREATE_TRACE_POINTS > +#include <trace/events/dma_buf.h> > + > static inline int is_dma_buf_file(struct file *); > > static DEFINE_MUTEX(dmabuf_list_mutex); > @@ -220,6 +223,8 @@ static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma) > dmabuf->size >> PAGE_SHIFT) > return -EINVAL; > > + trace_dma_buf_mmap_internal(dmabuf); > + > return dmabuf->ops->mmap(dmabuf, vma); > } > > @@ -745,6 +750,8 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) > > __dma_buf_list_add(dmabuf); > > + trace_dma_buf_export(dmabuf); > + > return dmabuf; > > err_dmabuf: > @@ -779,6 +786,8 @@ int dma_buf_fd(struct dma_buf *dmabuf, int flags) > > fd_install(fd, dmabuf->file); > > + trace_dma_buf_fd(dmabuf, fd); > + > return fd; > } > EXPORT_SYMBOL_NS_GPL(dma_buf_fd, "DMA_BUF"); > @@ -805,6 +814,8 @@ struct dma_buf *dma_buf_get(int fd) > return ERR_PTR(-EINVAL); > } > > + trace_dma_buf_get(fd, file); > + > return file->private_data; > } > EXPORT_SYMBOL_NS_GPL(dma_buf_get, "DMA_BUF"); > @@ -825,6 +836,8 @@ void dma_buf_put(struct dma_buf *dmabuf) > return; > > fput(dmabuf->file); > + > + trace_dma_buf_put(dmabuf); > } > EXPORT_SYMBOL_NS_GPL(dma_buf_put, "DMA_BUF"); > > @@ -998,6 +1011,8 @@ EXPORT_SYMBOL_NS_GPL(dma_buf_dynamic_attach, "DMA_BUF"); > struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, > struct device *dev) > { > + trace_dma_buf_attach(dmabuf, dev); > + > return dma_buf_dynamic_attach(dmabuf, dev, NULL, NULL); > } > EXPORT_SYMBOL_NS_GPL(dma_buf_attach, "DMA_BUF"); > @@ -1024,6 +1039,8 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) > dmabuf->ops->detach(dmabuf, attach); > > kfree(attach); > + > + trace_dma_buf_detach(dmabuf); > } > EXPORT_SYMBOL_NS_GPL(dma_buf_detach, "DMA_BUF"); > > @@ -1488,6 +1505,8 @@ int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma, > vma_set_file(vma, dmabuf->file); > vma->vm_pgoff = pgoff; > > + trace_dma_buf_mmap(dmabuf); > + > return dmabuf->ops->mmap(dmabuf, vma); > } > EXPORT_SYMBOL_NS_GPL(dma_buf_mmap, "DMA_BUF"); > diff --git a/include/trace/events/dma_buf.h b/include/trace/events/dma_buf.h > new file mode 100644 > index 000000000000..796ae444f6ae > --- /dev/null > +++ b/include/trace/events/dma_buf.h > @@ -0,0 +1,245 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#undef TRACE_SYSTEM > +#define TRACE_SYSTEM dma_buf > + > +#if !defined(_TRACE_DMA_BUF_H) || defined(TRACE_HEADER_MULTI_READ) > +#define _TRACE_DMA_BUF_H > + > +#include <linux/dma-buf.h> > +#include <linux/tracepoint.h> > + > +TRACE_EVENT(dma_buf_export, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) dmabuf->name can't be accessed without holding the appropriate lock, same of all other cases. Regards, Christian. > + __field(size_t, size) > + __field(ino_t, ino) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino) > +); > + > +TRACE_EVENT(dma_buf_fd, > + > + TP_PROTO(struct dma_buf *dmabuf, int fd), > + > + TP_ARGS(dmabuf, fd), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(int, fd) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->fd = fd; > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->fd) > +); > + > +TRACE_EVENT(dma_buf_mmap_internal, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino) > +); > + > +TRACE_EVENT(dma_buf_mmap, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino) > +); > + > +TRACE_EVENT(dma_buf_attach, > + > + TP_PROTO(struct dma_buf *dmabuf, struct device *dev), > + > + TP_ARGS(dmabuf, dev), > + > + TP_STRUCT__entry( > + __string(dname, dev_name(dev)) > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + ), > + > + TP_fast_assign( > + __assign_str(dname); > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + ), > + > + TP_printk("dev_name=%s exp_name=%s name=%s size=%zu ino=%lu", > + __get_str(dname), > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino) > +); > + > +TRACE_EVENT(dma_buf_detach, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino) > +); > + > +TRACE_EVENT(dma_buf_get, > + > + TP_PROTO(int fd, struct file *file), > + > + TP_ARGS(fd, file), > + > + TP_STRUCT__entry( > + __string(exp_name, ((struct dma_buf *)file->private_data)->exp_name) > + __string(name, ((struct dma_buf *)file->private_data)->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(int, fd) > + __field(long, f_ref) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = ((struct dma_buf *)file->private_data)->size; > + __entry->ino = ((struct dma_buf *)file->private_data)->file->f_inode->i_ino; > + __entry->fd = fd; > + __entry->f_ref = file_ref_get(&file->f_ref); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu fd=%d f_ref=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->fd, > + __entry->f_ref) > +); > + > +TRACE_EVENT(dma_buf_put, > + > + TP_PROTO(struct dma_buf *dmabuf), > + > + TP_ARGS(dmabuf), > + > + TP_STRUCT__entry( > + __string(exp_name, dmabuf->exp_name) > + __string(name, dmabuf->name) > + __field(size_t, size) > + __field(ino_t, ino) > + __field(long, f_ref) > + ), > + > + TP_fast_assign( > + __assign_str(exp_name); > + __assign_str(name); > + __entry->size = dmabuf->size; > + __entry->ino = dmabuf->file->f_inode->i_ino; > + __entry->f_ref = file_ref_get(&dmabuf->file->f_ref); > + ), > + > + TP_printk("exp_name=%s name=%s size=%zu ino=%lu f_ref=%ld", > + __get_str(exp_name), > + __get_str(name), > + __entry->size, > + __entry->ino, > + __entry->f_ref) > +); > + > +#endif /* _TRACE_DMA_BUF_H */ > + > +/* This part must be outside protection */ > +#include <trace/define_trace.h>

2 days

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig November 2025