Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

8 participants
2915 discussions

[PATCH AUTOSEL 5.15 18/69] udmabuf: Set the DMA mask for the udmabuf device (v2)

by Sasha Levin

From: Vivek Kasireddy <vivek.kasireddy(a)intel.com> [ Upstream commit 9e9fa6a9198b767b00f48160800128e83a038f9f ] If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. Reported-by: syzbot+10e27961f4da37c443b2(a)syzkaller.appspotmail.com Cc: Gerd Hoffmann <kraxel(a)redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy(a)intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220520205235.3687336-1-vivek… Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/dma-buf/udmabuf.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c index 9631f2fd2faf..38e8767ec371 100644 --- a/drivers/dma-buf/udmabuf.c +++ b/drivers/dma-buf/udmabuf.c @@ -368,7 +368,23 @@ static struct miscdevice udmabuf_misc = { static int __init udmabuf_dev_init(void) { - return misc_register(&udmabuf_misc); + int ret; + + ret = misc_register(&udmabuf_misc); + if (ret < 0) { + pr_err("Could not initialize udmabuf device\n"); + return ret; + } + + ret = dma_coerce_mask_and_coherent(udmabuf_misc.this_device, + DMA_BIT_MASK(64)); + if (ret < 0) { + pr_err("Could not setup DMA mask for udmabuf device\n"); + misc_deregister(&udmabuf_misc); + return ret; + } + + return 0; } static void __exit udmabuf_dev_exit(void) -- 2.35.1

2 years, 10 months

[PATCH AUTOSEL 5.18 20/93] udmabuf: Set the DMA mask for the udmabuf device (v2)

by Sasha Levin

2 years, 10 months

[PATCH AUTOSEL 5.19 021/105] udmabuf: Set the DMA mask for the udmabuf device (v2)

by Sasha Levin

2 years, 10 months

[PATCH] i2c: qcom-geni: Fix GPI DMA buffer sync-back

by Robin Reckmann

Fix i2c transfers using GPI DMA mode for all message types that do not set the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte"). In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(), and it has to synced back to the message after the transfer is done. Add missing assignment of dma buffer in geni_i2c_gpi(). Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to ensure the sync-back of this dma buffer to the message. Signed-off-by: Robin Reckmann <robin.reckmann(a)gmail.com> --- drivers/i2c/busses/i2c-qcom-geni.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 6ac402ea58fb..d3541e94794e 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -484,12 +484,12 @@ static void geni_i2c_gpi_unmap(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, { if (tx_buf) { dma_unmap_single(gi2c->se.dev->parent, tx_addr, msg->len, DMA_TO_DEVICE); - i2c_put_dma_safe_msg_buf(tx_buf, msg, false); + i2c_put_dma_safe_msg_buf(tx_buf, msg, !gi2c->err); } if (rx_buf) { dma_unmap_single(gi2c->se.dev->parent, rx_addr, msg->len, DMA_FROM_DEVICE); - i2c_put_dma_safe_msg_buf(rx_buf, msg, false); + i2c_put_dma_safe_msg_buf(rx_buf, msg, !gi2c->err); } } @@ -553,6 +553,7 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, desc->callback_param = gi2c; dmaengine_submit(desc); + *buf = dma_buf; *dma_addr_p = addr; return 0; -- 2.25.1

2 years, 10 months

[PATCH] dma-buf: revert "return only unsignaled fences in dma_fence_unwrap_for_each v3"

by Christian König

This reverts commit 8f61973718485f3e89bc4f408f929048b7b47c83. It turned out that this is not correct. Especially the sync_file info IOCTL needs to see even signaled fences to correctly report back their status to userspace. Instead add the filter in the merge function again where it makes sense. Signed-off-by: Christian König <christian.koenig(a)amd.com> --- drivers/dma-buf/dma-fence-unwrap.c | 3 ++- include/linux/dma-fence-unwrap.h | 6 +----- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/dma-buf/dma-fence-unwrap.c b/drivers/dma-buf/dma-fence-unwrap.c index 502a65ea6d44..7002bca792ff 100644 --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -72,7 +72,8 @@ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, count = 0; for (i = 0; i < num_fences; ++i) { dma_fence_unwrap_for_each(tmp, &iter[i], fences[i]) - ++count; + if (!dma_fence_is_signaled(tmp)) + ++count; } if (count == 0) diff --git a/include/linux/dma-fence-unwrap.h b/include/linux/dma-fence-unwrap.h index 390de1ee9d35..66b1e56fbb81 100644 --- a/include/linux/dma-fence-unwrap.h +++ b/include/linux/dma-fence-unwrap.h @@ -43,14 +43,10 @@ struct dma_fence *dma_fence_unwrap_next(struct dma_fence_unwrap *cursor); * Unwrap dma_fence_chain and dma_fence_array containers and deep dive into all * potential fences in them. If @head is just a normal fence only that one is * returned. - * - * Note that signalled fences are opportunistically filtered out, which - * means the iteration is potentially over no fence at all. */ #define dma_fence_unwrap_for_each(fence, cursor, head) \ for (fence = dma_fence_unwrap_first(head, cursor); fence; \ - fence = dma_fence_unwrap_next(cursor)) \ - if (!dma_fence_is_signaled(fence)) + fence = dma_fence_unwrap_next(cursor)) struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, struct dma_fence **fences, -- 2.25.1

2 years, 10 months

[PATCH] dma-buf/dma_resv_usage: update explicit sync documentation

by Christian König

Make it clear that DMA_RESV_USAGE_BOOKMARK can be used for explicit synced user space submissions as well and document the rules around adding the same fence with different usages. Signed-off-by: Christian König <christian.koenig(a)amd.com> --- include/linux/dma-resv.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/include/linux/dma-resv.h b/include/linux/dma-resv.h index c8ccbc94d5d2..264e27e56dff 100644 --- a/include/linux/dma-resv.h +++ b/include/linux/dma-resv.h @@ -62,6 +62,11 @@ struct dma_resv_list; * For example when asking for WRITE fences then the KERNEL fences are returned * as well. Similar when asked for READ fences then both WRITE and KERNEL * fences are returned as well. + * + * Already used fences can be promoted in the sense that a fence with + * DMA_RESV_USAGE_BOOKMARK could become DMA_RESV_USAGE_READ by adding it again + * with this usage. But fences can never be degraded in the sense that a fence + * with DMA_RESV_USAGE_WRITE could become DMA_RESV_USAGE_READ. */ enum dma_resv_usage { /** @@ -98,10 +103,15 @@ enum dma_resv_usage { * @DMA_RESV_USAGE_BOOKKEEP: No implicit sync. * * This should be used by submissions which don't want to participate in - * implicit synchronization. + * any implicit synchronization. + * + * The most common case are preemption fences, page table updates, TLB + * flushes as well as explicit synced user submissions. * - * The most common case are preemption fences as well as page table - * updates and their TLB flushes. + * Explicit synced user user submissions can be promoted to + * DMA_RESV_USAGE_READ or DMA_RESV_USAGE_WRITE as needed using + * dma_buf_import_sync_file() when implicit synchronization should + * become necessary after initial adding of the fence. */ DMA_RESV_USAGE_BOOKKEEP }; -- 2.25.1

2 years, 10 months

[PATCH] dma-buf/sync_file: use strscpy to replace strlcpy

by XueBing Chen

The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing(a)jari.cn> --- drivers/dma-buf/sync_file.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/dma-buf/sync_file.c b/drivers/dma-buf/sync_file.c index 3ebec19a8e02..af57799c86ce 100644 --- a/drivers/dma-buf/sync_file.c +++ b/drivers/dma-buf/sync_file.c @@ -132,7 +132,7 @@ EXPORT_SYMBOL(sync_file_get_fence); char *sync_file_get_name(struct sync_file *sync_file, char *buf, int len) { if (sync_file->user_name[0]) { - strlcpy(buf, sync_file->user_name, len); + strscpy(buf, sync_file->user_name, len); } else { struct dma_fence *fence = sync_file->fence; @@ -172,7 +172,7 @@ static struct sync_file *sync_file_merge(const char *name, struct sync_file *a, return NULL; } sync_file->fence = fence; - strlcpy(sync_file->user_name, name, sizeof(sync_file->user_name)); + strscpy(sync_file->user_name, name, sizeof(sync_file->user_name)); return sync_file; } @@ -262,9 +262,9 @@ static long sync_file_ioctl_merge(struct sync_file *sync_file, static int sync_fill_fence_info(struct dma_fence *fence, struct sync_fence_info *info) { - strlcpy(info->obj_name, fence->ops->get_timeline_name(fence), + strscpy(info->obj_name, fence->ops->get_timeline_name(fence), sizeof(info->obj_name)); - strlcpy(info->driver_name, fence->ops->get_driver_name(fence), + strscpy(info->driver_name, fence->ops->get_driver_name(fence), sizeof(info->driver_name)); info->status = dma_fence_get_status(fence); -- 2.25.1

2 years, 10 months

[PATCH v2] drm/gem: Fix GEM handle release errors

by Jeffy Chen

Currently we are assuming a one to one mapping between dmabuf and handle when releasing GEM handles. But that is not always true, since we would create extra handles for the GEM obj in cases like gem_open() and getfb{,2}(). A similar issue was reported at: https://lore.kernel.org/all/20211105083308.392156-1-jay.xu@rock-chips.com/ Another problem is that the drm_gem_remove_prime_handles() now only remove handle to the exported dmabuf (gem_obj->dma_buf), so the imported ones would leak: WARNING: CPU: 2 PID: 236 at drivers/gpu/drm/drm_prime.c:228 drm_prime_destroy_file_private+0x18/0x24 Let's fix these by using handle to find the exact map to remove. Signed-off-by: Jeffy Chen <jeffy.chen(a)rock-chips.com> --- Changes in v2: Fix a typo of rbtree. drivers/gpu/drm/drm_gem.c | 17 +---------------- drivers/gpu/drm/drm_internal.h | 4 ++-- drivers/gpu/drm/drm_prime.c | 20 ++++++++++++-------- 3 files changed, 15 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index eb0c2d041f13..ed39da383570 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -168,21 +168,6 @@ void drm_gem_private_object_init(struct drm_device *dev, } EXPORT_SYMBOL(drm_gem_private_object_init); -static void -drm_gem_remove_prime_handles(struct drm_gem_object *obj, struct drm_file *filp) -{ - /* - * Note: obj->dma_buf can't disappear as long as we still hold a - * handle reference in obj->handle_count. - */ - mutex_lock(&filp->prime.lock); - if (obj->dma_buf) { - drm_prime_remove_buf_handle_locked(&filp->prime, - obj->dma_buf); - } - mutex_unlock(&filp->prime.lock); -} - /** * drm_gem_object_handle_free - release resources bound to userspace handles * @obj: GEM object to clean up. @@ -253,7 +238,7 @@ drm_gem_object_release_handle(int id, void *ptr, void *data) if (obj->funcs->close) obj->funcs->close(obj, file_priv); - drm_gem_remove_prime_handles(obj, file_priv); + drm_prime_remove_buf_handle(&file_priv->prime, id); drm_vma_node_revoke(&obj->vma_node, file_priv); drm_gem_object_handle_put_unlocked(obj); diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index 1fbbc19f1ac0..7bb98e6a446d 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -74,8 +74,8 @@ int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv); void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv); -void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf); +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle); /* drm_drv.c */ struct drm_minor *drm_minor_acquire(unsigned int minor_id); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index e3f09f18110c..bd5366b16381 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -190,29 +190,33 @@ static int drm_prime_lookup_buf_handle(struct drm_prime_file_private *prime_fpri return -ENOENT; } -void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf) +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle) { struct rb_node *rb; - rb = prime_fpriv->dmabufs.rb_node; + mutex_lock(&prime_fpriv->lock); + + rb = prime_fpriv->handles.rb_node; while (rb) { struct drm_prime_member *member; - member = rb_entry(rb, struct drm_prime_member, dmabuf_rb); - if (member->dma_buf == dma_buf) { + member = rb_entry(rb, struct drm_prime_member, handle_rb); + if (member->handle == handle) { rb_erase(&member->handle_rb, &prime_fpriv->handles); rb_erase(&member->dmabuf_rb, &prime_fpriv->dmabufs); - dma_buf_put(dma_buf); + dma_buf_put(member->dma_buf); kfree(member); - return; - } else if (member->dma_buf < dma_buf) { + break; + } else if (member->handle < handle) { rb = rb->rb_right; } else { rb = rb->rb_left; } } + + mutex_unlock(&prime_fpriv->lock); } void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv) -- 2.20.1

2 years, 10 months

DMA-buf and uncached system memory

by Christian König

Hi guys, we are currently working an Freesync and direct scan out from system memory on AMD APUs in A+A laptops. On problem we stumbled over is that our display hardware needs to scan out from uncached system memory and we currently don't have a way to communicate that through DMA-buf. For our specific use case at hand we are going to implement something driver specific, but the question is should we have something more generic for this? After all the system memory access pattern is a PCIe extension and as such something generic. Regards, Christian.

2 years, 10 months

[PATCH 0/1] [RFC] drm/fourcc: Add new unsigned R16_UINT/RG1616_UINT formats

by Dennis Tsiang

This patch is an early RFC to discuss the viable options and alternatives for inclusion of unsigned integer formats for the DRM API. This patch adds a new single component 16-bit and a two component 32-bit DRM fourcc’s that represent unsigned integer formats. The use case for needing UINT formats, in our case, would be to support using raw buffers for camera ISPs. For images imported with DRM fourcc + modifier combination, the GPU driver needs a way to determine the datatype of the format which currently the DRM API does not provide explicitly with a notable exception of the floating-point fourccs such as DRM_FORMAT_XRGB16161616F as an example. As the DRM fourccs do not currently define the interpretation of the data, should the information be made explicit in the DRM API similarly to how it is already done in Vulkan? The reason for introducing datatype to the DRM fourcc's is that the alternative, for any API (e.g., EGL) that lacks the format datatype information for fourcc/modifier combination for dma_buf interop would be to introduce explicit additional metadata/attributes that encode this information which then would be passed to the GPU driver but the drawback of this is that it would require extending multiple graphics APIs to support every single platform. By having the DRM API expose the datatype information for formats saves a lot of integration/verification work for all of the different graphics APIs and platforms as this information could be determined by the DRM triple alone for dma_buf interop. It would be good to gather some opinions on what others think about introducing datatypes to the DRM API. Any feedback and suggestions are highly appreciated. Dennis Tsiang (1): [RFC] drm/fourcc: Add new unsigned R16_UINT/RG1616_UINT formats include/uapi/drm/drm_fourcc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) -- 2.36.1 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

2 years, 10 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig