Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

15 participants
3025 discussions

Re: [Linaro-mm-sig] [RFC] Synchronizing access to buffers shared with dma-buf between drivers/devices

by Erik Gilling

On Thu, Jun 7, 2012 at 4:35 AM, Tom Cooksey <tom.cooksey(a)arm.com> wrote: > The alternate is to not associate sync objects with buffers and > have them be distinct entities, exposed to userspace. This gives > userpsace more power and flexibility and might allow for use-cases > which an implicit synchronization mechanism can't satisfy - I'd > be curious to know any specifics here. Time and time again we've had problems with implicit synchronization resulting in bugs where different drivers play by slightly different implicit rules. We're convinced the best way to attack this problem is to move as much of the command and control of synchronization as possible into a single piece of code (the compositor in our case.) To facilitate this we're going to be mandating this explicit approach in the K release of Android. > However, every driver which > needs to participate in the synchronization mechanism will need > to have its interface with userspace modified to allow the sync > objects to be passed to the drivers. This seemed like a lot of > work to me, which is why I prefer the implicit approach. However > I don't actually know what work is needed and think it should be > explored. I.e. How much work is it to add explicit sync object > support to the DRM & v4l2 interfaces? > > E.g. I believe DRM/GEM's job dispatch API is "in-order" > in which case it might be easy to just add "wait for this fence" > and "signal this fence" ioctls. Seems like vmwgfx already has > something similar to this already? Could this work over having > to specify a list of sync objects to wait on and another list > of sync objects to signal for every operation (exec buf/page > flip)? What about for v4l2? If I understand you right a job submission with explicit sync would become 3 submission: 1) submit wait for pre-req fence job 2) submit render job 3) submit signal ready fence job Does DRM provide a way to ensure these 3 jobs are submitted atomically? I also expect GPU vendor would like to get clever about GPU to GPU fence dependancies. That could probably be handled entirely in the userspace GL driver. > I guess my other thought is that implicit vs explicit is not > mutually exclusive, though I'd guess there'd be interesting > deadlocks to have to debug if both were in use _at the same > time_. :-) I think this is an approach worth investigating. I'd like a way to either opt out of implicit sync or have a way to check if a dma-buf has an attached fence and detach it. Actually, that could work really well. Consider: * Each dma_buf has a single fence "slot" * on submission * the driver will extract the fence from the dma_buf and queue a wait on it. * the driver will replace that fence with it's own complettion fence before the job submission ioctl returns. * dma_buf will have two userspace ioctls: * DETACH: will return the fence as an FD to userspace and clear the fence slot in the dma_buf * ATTACH: takes a fence FD from userspace and attaches it to the dma_buf fence slot. Returns an error if the fence slot is non-empty. In the android case, we can do a detach after every submission and an attach right before. -Erik

13 years, 3 months

Re: [Linaro-mm-sig] Synchronization framework

by Maarten Lankhorst

Hey Erik, Op 07-06-12 19:35, Erik Gilling schreef: > On Thu, Jun 7, 2012 at 1:55 AM, Maarten Lankhorst > <m.b.lankhorst(a)gmail.com> wrote: >> I haven't looked at intel and amd, but from a quick glance >> it seems like they already implement fencing too, so just >> some way to synch up the fences on shared buffers seems >> like it could benefit all graphics drivers and the whole >> userspace synching could be done away with entirely. > It's important to have some level of userspace API so that GPU > generated graphics can participate in the graphics pipeline. Think of > the case where you have a software video codec streaming textures into > the GPU. It needs to know when the GPU is done with those textures so > it can reuse the buffer. > In the graphics case this problem already has to be handled without dma-buf, so adding any extra synchronization api for userspace that is only used when the bo is shared is a waste. I do agree you need some way to synch userspace though, but I think adding a new api for userspace is not the way to go. Cheers, Maarten PS: re-added cc's that seem to have fallen off from your mail.

13 years, 3 months

Re: [Linaro-mm-sig] [RFC] Synchronizing access to buffers shared with dma-buf between drivers/devices

by Erik Gilling

Tom, Is there more planned for KDS? It seems to be lacking some important features to be useful across many SoCs and graphics cards and features needed by Android. Here's some general feedback on those gaps. There is no way to share information between a buffer provider and a buffer consumer. This is important for architectures such as Tegra which have several hardware blocks that share common hardware synchronization. There's no userspace API. There are several reasons this is necessary. First, some userspace code (such as GL libs) might need to get at the private data of the sync primitive in order to generate command lists for a piece of hardware. Second is does not let userspace have control or even visibility into the graphics pipeline. The direction we are moving in Android is to put more control over synchronization into the compositor and move it out of being implemented "behind the scenes" by every vendor. Third, there's no way for a userspace process to wait on a sync primitive. There's no debugging or timing information tracked with the sync primitives. During development on new platforms and new OS versions we often have cases where the graphics pipeline stops making forward progress because one of the pieces (GPU, display, camera, dsp, userspace) has, itself, stopped making forward progress. Finding the root cause of the often hard to reproduce cases is difficult when you have to instrument every single driver. It's unclear how you would attach a dependency on a EGL fence to a dma_buf. Maybe this would be an EGL extension where you pass in the fence and the dma_buf. At Android we've been working on our own approach to this problem. I'll post those patches for discussion. Cheers, Erik

13 years, 3 months

[PATCHv6 00/13] Integration of videobuf2 with dmabuf

by Tomasz Stanislawski

Hello everyone, This patchset adds support for DMABUF [2] importing to V4L2 stack. The support for DMABUF exporting was moved to separate patchset due to dependency on patches for DMA mapping redesign by Marek Szyprowski [4]. v6: - fixed missing entry in v4l2_memory_names - fixed a bug occuring after get_user_pages failure - fixed a bug caused by using invalid vma for get_user_pages - prepare/finish no longer call dma_sync for dmabuf buffers v5: - removed change of importer/exporter behaviour - fixes vb2_dc_pages_to_sgt basing on Laurent's hints - changed pin/unpin words to lock/unlock in Doc v4: - rebased on mainline 3.4-rc2 - included missing importing support for s5p-fimc and s5p-tv - added patch for changing map/unmap for importers - fixes to Documentation part - coding style fixes - pairing {map/unmap}_dmabuf in vb2-core - fixing variable types and semantic of arguments in videobufb2-dma-contig.c v3: - rebased on mainline 3.4-rc1 - split 'code refactor' patch to multiple smaller patches - squashed fixes to Sumit's patches - patchset is no longer dependant on 'DMA mapping redesign' - separated path for handling IO and non-IO mappings - add documentation for DMABUF importing to V4L - removed all DMABUF exporter related code - removed usage of dma_get_pages extension v2: - extended VIDIOC_EXPBUF argument from integer memoffset to struct v4l2_exportbuffer - added patch that breaks DMABUF spec on (un)map_atachment callcacks but allows to work with existing implementation of DMABUF prime in DRM - all dma-contig code refactoring patches were squashed - bugfixes v1: List of changes since [1]. - support for DMA api extension dma_get_pages, the function is used to retrieve pages used to create DMA mapping. - small fixes/code cleanup to videobuf2 - added prepare and finish callbacks to vb2 allocators, it is used keep consistency between dma-cpu acess to the memory (by Marek Szyprowski) - support for exporting of DMABUF buffer in V4L2 and Videobuf2, originated from [3]. - support for dma-buf exporting in vb2-dma-contig allocator - support for DMABUF for s5p-tv and s5p-fimc (capture interface) drivers, originated from [3] - changed handling for userptr buffers (by Marek Szyprowski, Andrzej Pietrasiewicz) - let mmap method to use dma_mmap_writecombine call (by Marek Szyprowski) [1] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/4296… [2] https://lkml.org/lkml/2011/12/26/29 [3] http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/3635… [4] http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819 Laurent Pinchart (2): v4l: vb2-dma-contig: Shorten vb2_dma_contig prefix to vb2_dc v4l: vb2-dma-contig: Reorder functions Marek Szyprowski (2): v4l: vb2: add prepare/finish callbacks to allocators v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator Sumit Semwal (4): v4l: Add DMABUF as a memory type v4l: vb2: add support for shared buffer (dma_buf) v4l: vb: remove warnings about MEMORY_DMABUF v4l: vb2-dma-contig: add support for dma_buf importing Tomasz Stanislawski (5): Documentation: media: description of DMABUF importing in V4L2 v4l: vb2-dma-contig: Remove unneeded allocation context structure v4l: vb2-dma-contig: add support for scatterlist in userptr mode v4l: s5p-tv: mixer: support for dmabuf importing v4l: s5p-fimc: support for dmabuf importing Documentation/DocBook/media/v4l/compat.xml | 4 + Documentation/DocBook/media/v4l/io.xml | 179 +++++++ .../DocBook/media/v4l/vidioc-create-bufs.xml | 1 + Documentation/DocBook/media/v4l/vidioc-qbuf.xml | 15 + Documentation/DocBook/media/v4l/vidioc-reqbufs.xml | 45 +- drivers/media/video/s5p-fimc/Kconfig | 1 + drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/s5p-tv/Kconfig | 1 + drivers/media/video/s5p-tv/mixer_video.c | 2 +- drivers/media/video/v4l2-ioctl.c | 1 + drivers/media/video/videobuf-core.c | 4 + drivers/media/video/videobuf2-core.c | 207 +++++++- drivers/media/video/videobuf2-dma-contig.c | 520 +++++++++++++++++--- include/linux/videodev2.h | 7 + include/media/videobuf2-core.h | 34 ++ 15 files changed, 924 insertions(+), 99 deletions(-) -- 1.7.9.5

13 years, 3 months

Re: [Linaro-mm-sig] Synchronization framework

by Maarten Lankhorst

Hey, For intel/nouveau hybrid graphics I'm interested in this since it would allow me to synchronize between intel and nvidia cards without waiting for rendering to complete. I'm worried about the api though, nouveau and intel already have existing infrastructure to deal with fencing so exposing additional ioctl's will complicate the implementation. Would it be possible to never expose this interface to userspace but keep it inside the kernel only? nouveau_gem_ioctl_pushbuf is what's used for nouveau. If any dmabuf synch framework could hook into that then userspace would never have to act differently on shared bo's. I haven't looked at intel and amd, but from a quick glance it seems like they already implement fencing too, so just some way to synch up the fences on shared buffers seems like it could benefit all graphics drivers and the whole userspace synching could be done away with entirely. Cheers, Maarten

13 years, 3 months

Re: [Linaro-mm-sig] [RFC] Synchronizing access to buffers shared with dma-buf between drivers/devices

by Erik Gilling

On Wed, Jun 6, 2012 at 6:33 AM, John Reitan <john.reitan(a)arm.com> wrote: >> But maybe instead of inventing something new, we can just use 'struct >> kthread_work' instead of 'struct kds_callback' plus the two 'void *'s? >> If the user needs some extra args they can embed 'struct >> kthread_work' in their own struct and use container_of() magic in the >> cb. >> >> Plus this is a natural fit if you want to dispatch callbacks instead >> on a kthread_worker, which seems like it would simplify a few things >> when it comes to deadlock avoidance.. ie., not resource deadlock >> avoidance, but dispatching callbacks when some lock is held. > > That sounds like a better approach. > Will make a cleaner API, will look into it. When Tom visited us for android graphics camp in the fall he argued that there were cases where we would want to avoid an extra schedule. Consider the case where the GPU is waiting for a render buffer that the display controller is using. If that render can be kicked off w/o acquiring locks, the display's vsync IRQ handler can call release, which in turn calls the GPU callback, which in turn kicks off the render very quickly w/o having to leave IRQ context. One way around the locking issue with callbacks/async wait is to have async wait return a value to indicate that the resource has been acquired instead of calling the callback. This is the approach I chose in our sync framework. -Erik

13 years, 3 months

Re: [Linaro-mm-sig] [RFC] Synchronizing access to buffers shared with dma-buf between drivers/devices

by Rob Clark

Some comments inline.. at this stage mostly superficial issues about how the API works, etc.. not had a chance to dig too much into the implementation yet (although some of my comments about the API would change those anyways). Anyways, thanks for getting the ball rolling on this, and I think I can volunteer linaro to pick up and run w/ this if needed. On Fri, May 25, 2012 at 7:08 PM, Tom Cooksey <tom.cooksey(a)arm.com> wrote: > Hi All, > > I realise it's been a while since this was last discussed, however I'd like > to bring up kernel-side synchronization again. By kernel-side > synchronization, I mean allowing multiple drivers/devices wanting to access > the same buffer to do so without bouncing up to userspace to resolve > dependencies such as "the display controller can't start scanning out a > buffer until the GPU has finished rendering into it". As such, this is > really just an optimization which reduces latency between E.g. The GPU > finishing a rendering job and that buffer being scanned out. I appreciate > this particular example is already solved on desktop graphics cards as the > display controller and 3D core are both controlled by the same driver, so no > "generic" mechanism is needed. However on ARM SoCs, the 3D core (like an ARM > Mali) and display controller tend to be driven by separate drivers, so some > mechanism is needed to allow both drivers to synchronize their access to > buffers. > > There are multiple ways synchronization can be achieved, fences/sync objects > is one common approach, however we're presenting a different approach. > Personally, I quite like fence sync objects, however we believe it requires > a lot of userspace interfaces to be changed to pass around sync object > handles. Our hope is that the kds approach will require less effort to make > use of as no existing userspace interfaces need to be changed. E.g. To use > explicit fences, the struct drm_mode_crtc_page_flip would need a new members > to pass in the handle(s) of sync object(s) which the flip depends on (I.e. > don't flip until these fences fire). The additional benefit of our approach > is that it prevents userspace specifying dependency loops which can cause a > deadlock (see kds.txt for an explanation of what I mean here). > > I have waited until now to bring this up again because I am now able to > share the code I was trying (and failing I think) to explain previously. The > code has now been released under the GPLv2 from ARM Mali's developer portal, > however I've attempted to turn that into a patch to allow it to be discussed > on this list. Please find the patch inline below. > > While KDS defines a very generic mechanism, I am proposing that this code or > at least the concepts be merged with the existing dma_buf code, so a the > struct kds_resource members get moved to struct dma_buf, kds_* functions get > renamed to dma_buf_* functions, etc. So I guess what I'm saying is please > don't review the actual code just yet, only the concepts the code describes, > where kds_resource == dma_duf. > > > Cheers, > > Tom > > > > Author: Tom Cooksey <tom.cooksey(a)arm.com> > Date: Fri May 25 10:45:27 2012 +0100 > > Add new system to allow synchronizing access to resources > > See Documentation/kds.txt for details, however the general > idea is that this kds framework synchronizes multiple drivers > ("clients") wanting to access the same resources, where a > resource is typically a 2D image buffer being shared around > using dma-buf. > > Note: This patch is created by extracting the sources from the > tarball on <http://www.malideveloper.com/open-source-mali-gpus-lin > ux-kernel-device-drivers---dev-releases.php> and putting them in > roughly the right places. > > diff --git a/Documentation/kds.txt b/Documentation/kds.txt fwiw, I think the documentation could be made a bit more generic, but this and code style, etc shouldn't be too hard to fix > new file mode 100644 > index 0000000..a96db21 > --- /dev/null > +++ b/Documentation/kds.txt > @@ -0,0 +1,113 @@ > +# > +# (C) COPYRIGHT 2012 ARM Limited. All rights reserved. > +# > +# This program is free software and is provided to you under the terms of > the GNU General Public License version 2 > +# as published by the Free Software Foundation, and any use by you of this > program is subject to the terms of such GNU licence. > +# > +# A copy of the licence is included with the program, and can also be > obtained from Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > 02110-1301, USA. > +# > +# > + > + > +============================== > +kds - Kernel Dependency System > +============================== > + > +Introduction > +------------ > +kds provides a mechanism for clients to atomically lock down multiple > abstract resources. > +This can be done either synchronously or asynchronously. > +Abstract resources is used to allow a set of clients to use kds to control > access to any > +resource, an example is structured memory buffers. > + > +kds supports that buffer is locked for exclusive access and sharing of > buffers. > + > +kds can be built as either a integrated feature of the kernel or as a > module. > +It supports being compiled as a module both in-tree and out-of-tree. > + > + > +Concepts > +-------- > +A core concept in kds is abstract resources. > +A kds resource is just an abstraction for some client object, kds doesn't > care what it is. > +Typically EGL will consider UMP buffers as being a resource, thus each UMP > buffer has > +a kds resource for synchronization to the buffer. > + > +kds allows a client to create and destroy the abstract resource objects. > +A new resource object is made available asap (it is just a simple malloc > with some initializations), > +while destroy it requires some external synchronization. > + > +The other core concept in kds is consumer of resources. > +kds is requested to allow a client to consume a set of resources and the > client will be notified when it can consume the resources. > + > +Exclusive access allows only one client to consume a resource. > +Shared access permits multiple consumers to acceess a resource > concurrently. > + > + > +APIs > +---- > +kds provides simple resource allocate and destroy functions. > +Clients use this to instantiate and control the lifetime of the resources > kds manages. > + > +kds provides two ways to wait for resources: > +- Asynchronous wait: the client specifies a function pointer to be called > when wait is over > +- Synchronous wait: Function blocks until access is gained. > + > +The synchronous API has a timeout for the wait. > +The call can early out if a signal is delivered. > + > +After a client is done consuming the resource kds must be notified to > release the resources and let some other client take ownership. > +This is done via resource set release call. > + > +A Windows comparison: > +kds implements WaitForMultipleObjectsEx(..., bWaitAll = TRUE, ...) but also > has an asynchronous version in addition. > +kds resources can be seen as being the same as NT object manager resources. > + > +Internals > +--------- > +kds guarantees atomicity when a set of resources is operated on. > +This is implemented via a global resource lock which is taken by kds when > it updates resource objects. > + > +Internally a resource in kds is a linked list head with some flags. > + > +When a consumer requests access to a set of resources it is queued on each > of the resources. > +The link from the consumer to the resources can be triggered. Once all > links are triggered > +the registered callback is called or the blocking function returns. > +A link is considered triggered if it is the first on the list of consumers > of a resource, > +or if all the links ahead of it is marked as shared and itself is of the > type shared. > + > +When the client is done consuming the consumer object is removed from the > linked lists of > +the resources and a potential new consumer becomes the head of the > resources. > +As we add and remove consumers atomically across all resources we can > guarantee that > +we never introduces a A->B + B->A type of loops/deadlocks. > + > + > +kbase/base implementation > +------------------------- > +A HW job needs access to a set of shared resources. > +EGL tracks this and encodes the set along with the atom in the ringbuffer. > +EGL allocates a (k)base dep object to represent the dependency to the set > of resources and encodes that along with the list of resources. > +This dep object is use to create a dependency from a job chain(atom) to the > resources it needs to run. > +When kbase decodes the atom in the ringbuffer it finds the set of resources > and calls kds to request all the needed resources. > +As EGL needs to know when the kds request is delivered a new base event > object is needed: atom enqueued. This event is only delivered for atoms > which uses kds. > +The callback kbase registers trigger the dependency object described which > would trigger the existing JD system to release the job chain. > +When the atom is done kds resource set release is call to release the > resources. > + > +EGL will typically use exclusive access to the render target, while all > buffers used as input can be marked as shared. > + > + > +Buffer publish/vsync > +-------------------- > +EGL will use a separate ioctl or DRM flip to request the flip. > +If the LCD driver is integrated with kds EGL can do these operations early. > +The LCD driver must then implement the ioctl or DRM flip to be asynchronous > with kds async call. > +The LCD driver binds a kds resource to each virtual buffer (2 buffers in > case of double-buffering). > +EGL will make a dependency to the target kds resource in the kbase atom. > +After EGL receives a atom enqueued event it can ask the LCD driver to pan > to the target kds resource. > +When the atom is completed it'll release the resource and the LCD driver > will get its callback. > +In the callback it'll load the target buffer into the DMA unit of the LCD > hardware. > +The LCD driver will be the consumer of both buffers for a short period. > +The LCD driver will call kds resource set release on the previous on-screen > buffer when the next vsync/dma read end is handled. > + > + > diff --git a/drivers/misc/kds.c b/drivers/misc/kds.c > new file mode 100644 > index 0000000..8d7d55e > --- /dev/null > +++ b/drivers/misc/kds.c > @@ -0,0 +1,461 @@ > +/* > + * > + * (C) COPYRIGHT 2012 ARM Limited. All rights reserved. > + * > + * This program is free software and is provided to you under the terms of > the GNU General Public License version 2 > + * as published by the Free Software Foundation, and any use by you of this > program is subject to the terms of such GNU licence. > + * > + * A copy of the licence is included with the program, and can also be > obtained from Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > 02110-1301, USA. > + * > + */ > + > + > + > +#include <linux/slab.h> > +#include <linux/list.h> > +#include <linux/mutex.h> > +#include <linux/wait.h> > +#include <linux/sched.h> > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/workqueue.h> > +#include <linux/kds.h> > + > + > +#define KDS_LINK_TRIGGERED (1u << 0) > +#define KDS_LINK_EXCLUSIVE (1u << 1) > + > +#define KDS_IGNORED NULL > +#define KDS_INVALID (void*)-2 > +#define KDS_RESOURCE (void*)-1 > + > +struct kds_resource_set > +{ > + unsigned long num_resources; > + unsigned long pending; > + unsigned long locked_resources; > + struct kds_callback * cb; > + void * callback_parameter; > + void * callback_extra_parameter; > + struct list_head callback_link; > + struct work_struct callback_work; > + struct kds_link resources[0]; > +}; > + > +static DEFINE_MUTEX(kds_lock); > + > +int kds_callback_init(struct kds_callback * cb, int direct, kds_callback_fn > user_cb) > +{ > + int ret = 0; > + > + cb->direct = direct; > + cb->user_cb = user_cb; > + > + if (!direct) > + { > + cb->wq = alloc_workqueue("kds", WQ_UNBOUND | WQ_HIGHPRI, > WQ_UNBOUND_MAX_ACTIVE); > + if (!cb->wq) > + ret = -ENOMEM; > + } > + else > + { > + cb->wq = NULL; > + } > + > + return ret; > +} > +EXPORT_SYMBOL(kds_callback_init); > + > +void kds_callback_term(struct kds_callback * cb) > +{ > + if (!cb->direct) > + { > + BUG_ON(!cb->wq); > + destroy_workqueue(cb->wq); > + } > + else > + { > + BUG_ON(cb->wq); > + } > +} > + > +EXPORT_SYMBOL(kds_callback_term); > + > +static void kds_do_user_callback(struct kds_resource_set * rset) > +{ > + rset->cb->user_cb(rset->callback_parameter, > rset->callback_extra_parameter); > +} > + > +static void kds_queued_callback(struct work_struct * work) > +{ > + struct kds_resource_set * rset; > + rset = container_of( work, struct kds_resource_set, callback_work); > + > + kds_do_user_callback(rset); > +} > + > +static void kds_callback_perform(struct kds_resource_set * rset) > +{ > + if (rset->cb->direct) > + kds_do_user_callback(rset); > + else > + { > + int result; > + result = queue_work(rset->cb->wq, &rset->callback_work); > + /* if we got a 0 return it means we've triggered the same > rset twice! */ > + BUG_ON(!result); > + } > +} > + > +void kds_resource_init(struct kds_resource * res) > +{ > + BUG_ON(!res); > + INIT_LIST_HEAD(&res->waiters.link); > + res->waiters.parent = KDS_RESOURCE; > +} > +EXPORT_SYMBOL(kds_resource_init); > + > +void kds_resource_term(struct kds_resource * res) > +{ > + BUG_ON(!res); > + BUG_ON(!list_empty(&res->waiters.link)); > + res->waiters.parent = KDS_INVALID; > +} > +EXPORT_SYMBOL(kds_resource_term); > + > +int kds_async_waitall( > + struct kds_resource_set ** pprset, > + unsigned long flags, > + struct kds_callback * cb, > + void * callback_parameter, > + void * callback_extra_parameter, > + int number_resources, > + unsigned long * exclusive_access_bitmap, > + struct kds_resource ** resource_list) > +{ > + struct kds_resource_set * rset = NULL; > + int i; > + int triggered; > + int err = -EFAULT; > + > + BUG_ON(!pprset); > + BUG_ON(!resource_list); > + BUG_ON(!cb); > + > + mutex_lock(&kds_lock); > + > + if ((flags & KDS_FLAG_LOCKED_ACTION) == KDS_FLAG_LOCKED_FAIL) > + { > + for (i = 0; i < number_resources; i++) > + { > + if (resource_list[i]->lock_count) > + { > + err = -EBUSY; > + goto errout; > + } > + } > + } > + > + rset = kmalloc(sizeof(*rset) + number_resources * sizeof(struct > kds_link), GFP_KERNEL); > + if (!rset) > + { > + err = -ENOMEM; > + goto errout; > + } > + > + rset->num_resources = number_resources; > + rset->pending = number_resources; > + rset->locked_resources = 0; > + rset->cb = cb; > + rset->callback_parameter = callback_parameter; > + rset->callback_extra_parameter = callback_extra_parameter; > + INIT_LIST_HEAD(&rset->callback_link); > + INIT_WORK(&rset->callback_work, kds_queued_callback); > + > + for (i = 0; i < number_resources; i++) > + { > + unsigned long link_state = 0; > + > + INIT_LIST_HEAD(&rset->resources[i].link); > + rset->resources[i].parent = rset; > + > + if (test_bit(i, exclusive_access_bitmap)) > + { > + link_state |= KDS_LINK_EXCLUSIVE; > + } > + > + /* no-one else waiting? */ > + if (list_empty(&resource_list[i]->waiters.link)) > + { > + link_state |= KDS_LINK_TRIGGERED; > + rset->pending--; > + } > + /* Adding a non-exclusive and the current tail is a > triggered non-exclusive? */ > + else if (((link_state & KDS_LINK_EXCLUSIVE) == 0) && > + (((list_entry(resource_list[i]->waiters.link.prev, > struct kds_link, link)->state & (KDS_LINK_EXCLUSIVE | KDS_LINK_TRIGGERED)) > == KDS_LINK_TRIGGERED))) > + { > + link_state |= KDS_LINK_TRIGGERED; > + rset->pending--; > + } > + /* locked & ignore locked? */ > + else if ((resource_list[i]->lock_count) && ((flags & > KDS_FLAG_LOCKED_ACTION) == KDS_FLAG_LOCKED_IGNORE) ) > + { > + link_state |= KDS_LINK_TRIGGERED; > + rset->pending--; > + rset->resources[i].parent = KDS_IGNORED; /* to > disable decrementing the pending count when we get the ignored resource */ > + } > + rset->resources[i].state = link_state; > + list_add_tail(&rset->resources[i].link, > &resource_list[i]->waiters.link); > + } > + > + triggered = (rset->pending == 0); > + > + mutex_unlock(&kds_lock); > + > + /* set the pointer before the callback is called so it sees it */ > + *pprset = rset; > + > + if (triggered) > + { > + /* all resources obtained, trigger callback */ > + kds_callback_perform(rset); > + } > + > + return 0; > + > +errout: > + mutex_unlock(&kds_lock); > + return err; > +} > +EXPORT_SYMBOL(kds_async_waitall); > + > +static void wake_up_sync_call(void * callback_parameter, void * > callback_extra_parameter) > +{ > + wait_queue_head_t * wait = (wait_queue_head_t*)callback_parameter; > + wake_up(wait); > +} > + > +static struct kds_callback sync_cb = > +{ > + wake_up_sync_call, > + 1, > + NULL, > +}; > + > +struct kds_resource_set * kds_waitall( > + int number_resources, > + unsigned long * exclusive_access_bitmap, > + struct kds_resource ** resource_list, > + unsigned long jiffies_timeout) > +{ > + struct kds_resource_set * rset; > + int i; > + int triggered = 0; > + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); > + > + rset = kmalloc(sizeof(*rset) + number_resources * sizeof(struct > kds_link), GFP_KERNEL); > + if (!rset) > + return rset; > + > + rset->num_resources = number_resources; > + rset->pending = number_resources; > + rset->locked_resources = 1; > + INIT_LIST_HEAD(&rset->callback_link); > + INIT_WORK(&rset->callback_work, kds_queued_callback); > + > + mutex_lock(&kds_lock); > + > + for (i = 0; i < number_resources; i++) > + { > + unsigned long link_state = 0; > + > + if (likely(resource_list[i]->lock_count < ULONG_MAX)) > + resource_list[i]->lock_count++; > + else > + break; > + > + if (test_bit(i, exclusive_access_bitmap)) > + { > + link_state |= KDS_LINK_EXCLUSIVE; > + } > + > + if (list_empty(&resource_list[i]->waiters.link)) > + { > + link_state |= KDS_LINK_TRIGGERED; > + rset->pending--; > + } > + /* Adding a non-exclusive and the current tail is a > triggered non-exclusive? */ > + else if (((link_state & KDS_LINK_EXCLUSIVE) == 0) && > + (((list_entry(resource_list[i]->waiters.link.prev, > struct kds_link, link)->state & (KDS_LINK_EXCLUSIVE | KDS_LINK_TRIGGERED)) > == KDS_LINK_TRIGGERED))) > + { > + link_state |= KDS_LINK_TRIGGERED; > + rset->pending--; > + } > + > + INIT_LIST_HEAD(&rset->resources[i].link); > + rset->resources[i].parent = rset; > + rset->resources[i].state = link_state; > + list_add_tail(&rset->resources[i].link, > &resource_list[i]->waiters.link); > + } > + > + if (i < number_resources) > + { > + /* an overflow was detected, roll back */ > + while (i--) > + { > + list_del(&rset->resources[i].link); > + resource_list[i]->lock_count--; > + } > + mutex_unlock(&kds_lock); > + kfree(rset); > + return ERR_PTR(-EFAULT); > + } > + > + if (rset->pending == 0) > + triggered = 1; > + else > + { > + rset->cb = &sync_cb; > + rset->callback_parameter = &wake; > + rset->callback_extra_parameter = NULL; > + } > + > + mutex_unlock(&kds_lock); > + > + if (!triggered) > + { > + long wait_res; > + if ( KDS_WAIT_BLOCKING == jiffies_timeout ) > + { > + wait_res = wait_event_interruptible(wake, > rset->pending == 0); > + } > + else > + { > + wait_res = wait_event_interruptible_timeout(wake, > rset->pending == 0, jiffies_timeout); > + } > + if ((wait_res == -ERESTARTSYS) || (wait_res == 0)) > + { > + /* use \a kds_resource_set_release to roll back */ > + kds_resource_set_release(&rset); > + return ERR_PTR(wait_res); > + } > + } > + return rset; > +} > +EXPORT_SYMBOL(kds_waitall); > + > +void kds_resource_set_release(struct kds_resource_set ** pprset) > +{ > + struct list_head triggered = LIST_HEAD_INIT(triggered); > + struct kds_resource_set * rset; > + struct kds_resource_set * it; > + int i; > + > + BUG_ON(!pprset); > + > + mutex_lock(&kds_lock); > + > + rset = *pprset; > + if (!rset) > + { > + /* caught a race between a cancelation > + * and a completion, nothing to do */ > + mutex_unlock(&kds_lock); > + return; > + } > + > + /* clear user pointer so we'll be the only > + * thread handling the release */ > + *pprset = NULL; > + > + for (i = 0; i < rset->num_resources; i++) > + { > + struct kds_resource * resource; > + struct kds_link * it = NULL; > + > + /* fetch the previous entry on the linked list */ > + it = list_entry(rset->resources[i].link.prev, struct > kds_link, link); > + /* unlink ourself */ > + list_del(&rset->resources[i].link); > + > + /* any waiters? */ > + if (list_empty(&it->link)) > + continue; > + > + /* were we the head of the list? (head if prev is a > resource) */ > + if (it->parent != KDS_RESOURCE) > + continue; > + > + /* we were the head, find the kds_resource */ > + resource = container_of(it, struct kds_resource, waiters); > + > + if (rset->locked_resources) > + { > + resource->lock_count--; > + } > + > + /* we know there is someone waiting from the any-waiters > test above */ > + > + /* find the head of the waiting list */ > + it = list_first_entry(&resource->waiters.link, struct > kds_link, link); > + > + /* new exclusive owner? */ > + if (it->state & KDS_LINK_EXCLUSIVE) > + { > + /* link now triggered */ > + it->state |= KDS_LINK_TRIGGERED; > + /* a parent to update? */ > + if (it->parent != KDS_IGNORED) > + { > + if (0 == --it->parent->pending) > + { > + /* new owner now triggered, track > for callback later */ > + list_add(&it->parent->callback_link, > &triggered); > + } > + } > + } > + /* exclusive releasing ? */ > + else if (rset->resources[i].state & KDS_LINK_EXCLUSIVE) > + { > + /* trigger non-exclusive until end-of-list or first > exclusive */ > + list_for_each_entry(it, &resource->waiters.link, > link) > + { > + /* exclusive found, stop triggering */ > + if (it->state & KDS_LINK_EXCLUSIVE) > + break; > + > + it->state |= KDS_LINK_TRIGGERED; > + /* a parent to update? */ > + if (it->parent != KDS_IGNORED) > + { > + if (0 == --it->parent->pending) > + { > + /* new owner now triggered, > track for callback later */ > + > list_add(&it->parent->callback_link, &triggered); > + } > + } > + } > + } > + > + } > + > + mutex_unlock(&kds_lock); > + > + while (!list_empty(&triggered)) > + { > + it = list_first_entry(&triggered, struct kds_resource_set, > callback_link); > + list_del(&it->callback_link); > + kds_callback_perform(it); > + } > + > + cancel_work_sync(&rset->callback_work); > + > + /* free the resource set */ > + kfree(rset); > +} > +EXPORT_SYMBOL(kds_resource_set_release); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("ARM Ltd."); > +MODULE_VERSION("1.0"); > diff --git a/include/linux/kds.h b/include/linux/kds.h > new file mode 100644 > index 0000000..65e5706 > --- /dev/null > +++ b/include/linux/kds.h > @@ -0,0 +1,154 @@ > +/* > + * > + * (C) COPYRIGHT 2012 ARM Limited. All rights reserved. > + * > + * This program is free software and is provided to you under the terms of > the GNU General Public License version 2 > + * as published by the Free Software Foundation, and any use by you of this > program is subject to the terms of such GNU licence. > + * > + * A copy of the licence is included with the program, and can also be > obtained from Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > 02110-1301, USA. > + * > + */ > + > + > + > +#ifndef _KDS_H_ > +#define _KDS_H_ > + > +#include <linux/list.h> > +#include <linux/workqueue.h> > + > +#define KDS_WAIT_BLOCKING (ULONG_MAX) > + > +/* what to do when waitall must wait for a synchronous locked resource: */ > +#define KDS_FLAG_LOCKED_FAIL (0u << 0) /* fail waitall */ > +#define KDS_FLAG_LOCKED_IGNORE (1u << 0) /* don't wait, but block other > that waits */ > +#define KDS_FLAG_LOCKED_WAIT (2u << 0) /* wait (normal */ > +#define KDS_FLAG_LOCKED_ACTION (3u << 0) /* mask to extract the action to > do on locked resources */ > + > +struct kds_resource_set; > + > +typedef void (*kds_callback_fn) (void * callback_parameter, void * > callback_extra_parameter); > + > +struct kds_callback > +{ > + kds_callback_fn user_cb; /* real cb */ > + int direct; /* do direct or queued call? */ > + struct workqueue_struct * wq; > +}; > + > +struct kds_link > +{ > + struct kds_resource_set * parent; > + struct list_head link; > + unsigned long state; > +}; > + > +struct kds_resource > +{ > + struct kds_link waiters; > + unsigned long lock_count; > +}; > + > +/* callback API */ > + > +/* Initialize a callback object. > + * > + * Typically created per context or per hw resource. > + * > + * Callbacks can be performed directly if no nested locking can > + * happen in the client. > + * > + * Nested locking can occur when a lock is held during the > kds_async_waitall or > + * kds_resource_set_release call. If the callback needs to take the same > lock > + * nested locking will happen. > + * > + * If nested locking could happen non-direct callbacks can be requested. > + * Callbacks will then be called asynchronous to the triggering call. > + */ > +int kds_callback_init(struct kds_callback * cb, int direct, kds_callback_fn > user_cb); > + > +/* Terminate the use of a callback object. > + * > + * If the callback object was set up as non-direct > + * any pending callbacks will be flushed first. > + * Note that to avoid a deadlock the lock callbacks needs > + * can't be held when a callback object is terminated. > + */ > +void kds_callback_term(struct kds_callback * cb); hmm, not hugely a fan of this.. having callbacks that might need to aquire locks be potentially called synchronously in special cases. It seems like it can get simpler if pending callbacks could hold a reference to the underlying object until the callback completes. Although not quite sure offhand how that can work without coupling kds to dmabuf or GEM.. > + > +/* resource object API */ > + > +/* initialize a resource handle for a shared resource */ > +void kds_resource_init(struct kds_resource * resource); > + > +/* > + * Will assert if the resource is being used or waited on. > + * The caller should NOT try to terminate a resource that could still have > clients. > + * After the function returns the resource is no longer known by kds. > + */ > +void kds_resource_term(struct kds_resource * resource); > + > +/* Asynchronous wait for a set of resources. > + * Callback will be called when all resources are available. > + * If all the resources was available the callback will be called before > kds_async_waitall returns. > + * So one must not hold any locks the callback code-flow can take when > calling kds_async_waitall. > + * Caller considered to own/use the resources until \a kds_rset_release is > called. > + * flags is one or more of the KDS_FLAG_* set. > + * exclusive_access_bitmap is a bitmap where a high bit means exclusive > access while a low bit means shared access. > + * Use the Linux __set_bit API, where the index of the buffer to control is > used as the bit index. > + * > + * Standard Linux error return value. > + */ > +int kds_async_waitall( > + struct kds_resource_set ** pprset, > + unsigned long flags, > + struct kds_callback * cb, > + void * callback_parameter, > + void * callback_extra_parameter, > + int number_resources, > + unsigned long * exclusive_access_bitmap, hmm, is there advantage of passing the requested resources this way, vs. just having two arrays (one for exclusive access, one for shared access)? > + struct kds_resource ** resource_list); callback_parameter + callback_extra_parameter seems a bit, well, odd. I'm guessing that is some implementation detail about mali driver peaking through? But maybe instead of inventing something new, we can just use 'struct kthread_work' instead of 'struct kds_callback' plus the two 'void *'s? If the user needs some extra args they can embed 'struct kthread_work' in their own struct and use container_of() magic in the cb. Plus this is a natural fit if you want to dispatch callbacks instead on a kthread_worker, which seems like it would simplify a few things when it comes to deadlock avoidance.. ie., not resource deadlock avoidance, but dispatching callbacks when some lock is held. /me wonders what sort of fun would otherwise happen if the cb ever indirectly called kds_resource_set_release()? > +/* Synchronous wait for a set of resources. > + * Function will return when one of these have happened: > + * - all resources have been obtained > + * - timeout lapsed while waiting > + * - a signal was received while waiting > + * > + * Caller considered to own/use the resources when the function returns. > + * Caller must release the resources using \a kds_rset_release. > + * > + * Calling this function while holding already locked resources or other > locking primitives is dangerous. > + * One must if this is needed decide on a lock order of the resources > and/or the other locking primitives > + * and always take the resources/locking primitives in the specific order. > + * > + * Use the ERR_PTR framework to decode the return value. > + * NULL = time out > + * If IS_ERR then PTR_ERR gives: > + * ERESTARTSYS = signal received, retry call after signal > + * all other values = internal error, lock failed > + * Other values = successful wait, now the owner, must call > kds_resource_set_release > + */ > +struct kds_resource_set * kds_waitall( > + int number_resources, > + unsigned long * exclusive_access_bitmap, > + struct kds_resource ** resource_list, > + unsigned long jifies_timeout); > + > +/* Release resources after use. > + * Caller must handle that other async callbacks will trigger, > + * so must avoid holding any locks a callback will take. > + * > + * The function takes a pointer to your poiner to handle a race > + * between a cancelation and a completion. > + * > + * If the caller can't guarantee that a race can't occur then > + * the passed in pointer must be the same in both call paths > + * to allow kds to manage the potential race. > + */ > +void kds_resource_set_release(struct kds_resource_set ** pprset); maybe using a worker as mentioned above for dealing w/ async cb's simplify's things? Maybe I'm a bit paranoid about locking around all of this, but basically the synchronization framework ends up having to deal w/ all the potential deadlock and recursive lock issues that we tried to hide from w/ dmabuf ;-) BR, -R > + > +#endif /* _KDS_H_ */ > + > > > > _______________________________________________ > dri-devel mailing list > dri-devel(a)lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel

13 years, 3 months

[PATCH] ARM: mm: fix type of the arm_dma_limit global variable

by Marek Szyprowski

arm_dma_limit stores physical address of maximal address accessible by DMA, so the phys_addr_t type makes much more sence for it instead of u32. This patch fixes the following build warning: arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast Reported-by: Russell King <linux(a)arm.linux.org.uk> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- arch/arm/mm/init.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8f5813b..39f2a86 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -211,7 +211,7 @@ EXPORT_SYMBOL(arm_dma_zone_size); * allocations. This must be the smallest DMA mask in the system, * so a successful GFP_DMA allocation will always satisfy this. */ -u32 arm_dma_limit; +phys_addr_t arm_dma_limit; static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) -- 1.7.1.569.g6f426

13 years, 3 months

(no subject)

by Erik Gilling

>From c976a6bf6b144f321a7a84ca40e27a2373174e8a Mon Sep 17 00:00:00 2001 From: Erik Gilling <konkers(a)android.com> Date: Tue, 5 Jun 2012 14:39:58 -0700 Subject: [RFC 00/11] Synchronization framework Here is the synchronization framework we are work on here at Android. We chose to keep synchronization decoupled from dma_buf because we need to synchronize with resouces that do not implement dma_buf. Erik Gilling (11): sync: Add synchronization framework sw_sync: add cpu based sync driver sync: add timestamps to sync_pts sync: add debugfs support sw_sync: add debug support sync: add ioctl to get fence data sw_sync: add fill_driver_data support sync: add poll support sync: allow async waits to be canceled sync: export sync API symbols sw_sync: export sw_sync API Documentation/sync.txt | 75 +++++ drivers/base/Kconfig | 26 ++ drivers/base/Makefile | 3 + drivers/base/sw_sync.c | 259 +++++++++++++++ drivers/base/sync.c | 830 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/sw_sync.h | 58 ++++ include/linux/sync.h | 414 +++++++++++++++++++++++ 7 files changed, 1665 insertions(+), 0 deletions(-) create mode 100644 Documentation/sync.txt create mode 100644 drivers/base/sw_sync.c create mode 100644 drivers/base/sync.c create mode 100644 include/linux/sw_sync.h create mode 100644 include/linux/sync.h -- 1.7.7.3

13 years, 3 months

[GIT PULL] CMA and ARM DMA-mapping fix for v3.5-rc2

by Marek Szyprowski

Hi Linus, I would like to ask for pulling a fix for Contiguous Memory Allocator (CMA) integration for ARM architecture for v3.5-rc2. The following changes since commit f8f5701bdaf9134b1f90e5044a82c66324d2073f: Linux 3.5-rc1 (2012-06-02 18:29:26 -0700) are available in the git repository at: git://git.linaro.org/people/mszyprowski/linux-dma-mapping.git fixes-for-linus Marek Szyprowski (1): ARM: dma-mapping: remove unconditional dependency on CMA arch/arm/Kconfig | 1 - arch/arm/mm/dma-mapping.c | 10 ++++------ 2 files changed, 4 insertions(+), 7 deletions(-) Thanks! Best regards Marek Szyprowski Samsung Poland R&D Center

13 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig