Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

24 participants
7063 discussions

[PATCH] drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl

by Min Li

Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free. Signed-off-by: Min Li <lm0963hack(a)gmail.com> --- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index bdc5af23f005..450c7cbdd28a 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -478,7 +478,7 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, drm_gem_object_put(gobj); up_read(&rdev->exclusive_lock); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; } -- 2.34.1

3 years, 2 months

[PATCH 0/7] Add a DRM driver to support AI Processing Unit (APU)

by Alexandre Bailon

This adds a DRM driver that implements communication between the CPU and an APU. The driver target embedded device that usually run inference using some prebuilt models. The goal is to provide common infrastructure that could be re-used to support many accelerators. Both kernel, userspace and firmware tries to use standard and existing to leverage the development and maintenance effort. The series implements two platform drivers, one for simulation and another one for the mt8183 (compatible with mt8365). For the people interested by the firmware or userspace library, the sources are available here: https://gitlab.baylibre.com/baylibre/libapu/libapu The support of APU has to be upstreamed to libdrm. Until this is done, you could find the source here: https://gitlab.baylibre.com/baylibre/libapu/libdrm/-/tree/abailon/main The driver for mt8183 depends on this series (which is currently blocked): https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=620429 Alexandre Bailon (5): drm: Add support of AI Processor Unit (APU) drm/apu: Add memory allocator drm/apu: Add support of requests drm/apu: Add support of IOMMU dt-bindings: Add bidings for mtk,apu-drm Julien Stephan (2): drm/apu: allow platform driver to implement their own mmap function drm/apu: Add support for a simulated APU .../devicetree/bindings/gpu/mtk,apu-drm.yaml | 38 ++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/apu/Kconfig | 22 + drivers/gpu/drm/apu/Makefile | 10 + drivers/gpu/drm/apu/apu_drv.c | 282 +++++++++ drivers/gpu/drm/apu/apu_gem.c | 230 +++++++ drivers/gpu/drm/apu/apu_internal.h | 205 ++++++ drivers/gpu/drm/apu/apu_sched.c | 592 ++++++++++++++++++ drivers/gpu/drm/apu/simu_apu.c | 313 +++++++++ include/uapi/drm/apu_drm.h | 81 +++ 11 files changed, 1776 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/mtk,apu-drm.yaml create mode 100644 drivers/gpu/drm/apu/Kconfig create mode 100644 drivers/gpu/drm/apu/Makefile create mode 100644 drivers/gpu/drm/apu/apu_drv.c create mode 100644 drivers/gpu/drm/apu/apu_gem.c create mode 100644 drivers/gpu/drm/apu/apu_internal.h create mode 100644 drivers/gpu/drm/apu/apu_sched.c create mode 100644 drivers/gpu/drm/apu/simu_apu.c create mode 100644 include/uapi/drm/apu_drm.h -- 2.39.2

3 years, 2 months

[PATCH] drm: Remove unnecessary (void*) conversions

by Su Hui

Pointer variables of (void*) type do not require type cast. Signed-off-by: Su Hui <suhui(a)nfschina.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 4 ++-- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 2 +- drivers/gpu/drm/omapdrm/omap_debugfs.c | 6 +++--- drivers/gpu/drm/pl111/pl111_debugfs.c | 2 +- drivers/gpu/drm/qxl/qxl_debugfs.c | 4 ++-- drivers/gpu/drm/tiny/arcpgu.c | 2 +- drivers/gpu/drm/ttm/ttm_resource.c | 3 +-- drivers/gpu/drm/virtio/virtgpu_debugfs.c | 6 +++--- drivers/gpu/drm/vmwgfx/ttm_object.c | 5 ++--- drivers/gpu/drm/vmwgfx/vmwgfx_gem.c | 2 +- 12 files changed, 19 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index 827fcb4fb3b3..8a2c39927167 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -3312,7 +3312,7 @@ static ssize_t dtn_log_write( static int mst_topo_show(struct seq_file *m, void *unused) { - struct amdgpu_device *adev = (struct amdgpu_device *)m->private; + struct amdgpu_device *adev = m->private; struct drm_device *dev = adev_to_drm(adev); struct drm_connector *connector; struct drm_connector_list_iter conn_iter; diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index 58c2246918fd..e6c870bd307b 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -3671,7 +3671,7 @@ static void amdgpu_parse_cg_state(struct seq_file *m, u64 flags) static int amdgpu_debugfs_pm_info_show(struct seq_file *m, void *unused) { - struct amdgpu_device *adev = (struct amdgpu_device *)m->private; + struct amdgpu_device *adev = m->private; struct drm_device *dev = adev_to_drm(adev); u64 flags = 0; int r; diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index 31a7f59ccb49..dd57f7164e9a 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -198,7 +198,7 @@ static int etnaviv_ring_show(struct etnaviv_gpu *gpu, struct seq_file *m) static int show_unlocked(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; int (*show)(struct drm_device *dev, struct seq_file *m) = node->info_ent->data; @@ -208,7 +208,7 @@ static int show_unlocked(struct seq_file *m, void *arg) static int show_each_gpu(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct etnaviv_drm_private *priv = dev->dev_private; struct etnaviv_gpu *gpu; diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c index 2a36d1ca8fda..96b59d5d68ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c @@ -37,7 +37,7 @@ static int nouveau_debugfs_vbios_image(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct nouveau_drm *drm = nouveau_drm(node->minor->dev); int i; diff --git a/drivers/gpu/drm/omapdrm/omap_debugfs.c b/drivers/gpu/drm/omapdrm/omap_debugfs.c index a3d470468e5b..a94ce502e152 100644 --- a/drivers/gpu/drm/omapdrm/omap_debugfs.c +++ b/drivers/gpu/drm/omapdrm/omap_debugfs.c @@ -19,7 +19,7 @@ static int gem_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct omap_drm_private *priv = dev->dev_private; @@ -33,7 +33,7 @@ static int gem_show(struct seq_file *m, void *arg) static int mm_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct drm_printer p = drm_seq_file_printer(m); @@ -45,7 +45,7 @@ static int mm_show(struct seq_file *m, void *arg) #ifdef CONFIG_DRM_FBDEV_EMULATION static int fb_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct drm_fb_helper *helper = dev->fb_helper; struct drm_framebuffer *fb; diff --git a/drivers/gpu/drm/pl111/pl111_debugfs.c b/drivers/gpu/drm/pl111/pl111_debugfs.c index 6744fa16f464..4df03ec5d368 100644 --- a/drivers/gpu/drm/pl111/pl111_debugfs.c +++ b/drivers/gpu/drm/pl111/pl111_debugfs.c @@ -32,7 +32,7 @@ static const struct { static int pl111_debugfs_regs(struct seq_file *m, void *unused) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct pl111_drm_dev_private *priv = dev->dev_private; int i; diff --git a/drivers/gpu/drm/qxl/qxl_debugfs.c b/drivers/gpu/drm/qxl/qxl_debugfs.c index 2d9ed3b94574..5b4fe3049529 100644 --- a/drivers/gpu/drm/qxl/qxl_debugfs.c +++ b/drivers/gpu/drm/qxl/qxl_debugfs.c @@ -38,7 +38,7 @@ static int qxl_debugfs_irq_received(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct qxl_device *qdev = to_qxl(node->minor->dev); seq_printf(m, "%d\n", atomic_read(&qdev->irq_received)); @@ -52,7 +52,7 @@ qxl_debugfs_irq_received(struct seq_file *m, void *data) static int qxl_debugfs_buffers_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct qxl_device *qdev = to_qxl(node->minor->dev); struct qxl_bo *bo; diff --git a/drivers/gpu/drm/tiny/arcpgu.c b/drivers/gpu/drm/tiny/arcpgu.c index e5b10e41554a..09f728355aba 100644 --- a/drivers/gpu/drm/tiny/arcpgu.c +++ b/drivers/gpu/drm/tiny/arcpgu.c @@ -338,7 +338,7 @@ static int arcpgu_unload(struct drm_device *drm) #ifdef CONFIG_DEBUG_FS static int arcpgu_show_pxlclock(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct drm_device *drm = node->minor->dev; struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(drm); unsigned long clkrate = clk_get_rate(arcpgu->clk); diff --git a/drivers/gpu/drm/ttm/ttm_resource.c b/drivers/gpu/drm/ttm/ttm_resource.c index 7333f7a87a2f..540faabcf8a4 100644 --- a/drivers/gpu/drm/ttm/ttm_resource.c +++ b/drivers/gpu/drm/ttm/ttm_resource.c @@ -727,9 +727,8 @@ ttm_kmap_iter_linear_io_fini(struct ttm_kmap_iter_linear_io *iter_io, static int ttm_resource_manager_show(struct seq_file *m, void *unused) { - struct ttm_resource_manager *man = - (struct ttm_resource_manager *)m->private; struct drm_printer p = drm_seq_file_printer(m); + struct ttm_resource_manager *man = m->private; ttm_resource_manager_debug(man, &p); return 0; } diff --git a/drivers/gpu/drm/virtio/virtgpu_debugfs.c b/drivers/gpu/drm/virtio/virtgpu_debugfs.c index 853dd9aa397e..577691af9707 100644 --- a/drivers/gpu/drm/virtio/virtgpu_debugfs.c +++ b/drivers/gpu/drm/virtio/virtgpu_debugfs.c @@ -43,7 +43,7 @@ static void virtio_gpu_add_int(struct seq_file *m, const char *name, int value) static int virtio_gpu_features(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; virtio_gpu_add_bool(m, "virgl", vgdev->has_virgl_3d); @@ -68,7 +68,7 @@ static int virtio_gpu_features(struct seq_file *m, void *data) static int virtio_gpu_debugfs_irq_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; seq_printf(m, "fence %llu %lld\n", @@ -80,7 +80,7 @@ virtio_gpu_debugfs_irq_info(struct seq_file *m, void *data) static int virtio_gpu_debugfs_host_visible_mm(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; struct drm_printer p; diff --git a/drivers/gpu/drm/vmwgfx/ttm_object.c b/drivers/gpu/drm/vmwgfx/ttm_object.c index ddf8373c1d77..e9e3cc8f5b49 100644 --- a/drivers/gpu/drm/vmwgfx/ttm_object.c +++ b/drivers/gpu/drm/vmwgfx/ttm_object.c @@ -513,8 +513,7 @@ static void ttm_prime_refcount_release(struct ttm_base_object **p_base) */ static void ttm_prime_dmabuf_release(struct dma_buf *dma_buf) { - struct ttm_prime_object *prime = - (struct ttm_prime_object *) dma_buf->priv; + struct ttm_prime_object *prime = dma_buf->priv; struct ttm_base_object *base = &prime->base; struct ttm_object_device *tdev = base->tfile->tdev; @@ -554,7 +553,7 @@ int ttm_prime_fd_to_handle(struct ttm_object_file *tfile, if (dma_buf->ops != &tdev->ops) return -ENOSYS; - prime = (struct ttm_prime_object *) dma_buf->priv; + prime = dma_buf->priv; base = &prime->base; *handle = base->handle; ret = ttm_ref_object_add(tfile, base, NULL, false); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c index c0da89e16e6f..3267a4e61382 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c @@ -220,7 +220,7 @@ static void vmw_bo_print_info(int id, struct vmw_bo *bo, struct seq_file *m) static int vmw_debugfs_gem_info_show(struct seq_file *m, void *unused) { - struct vmw_private *vdev = (struct vmw_private *)m->private; + struct vmw_private *vdev = m->private; struct drm_device *dev = &vdev->drm; struct drm_file *file; int r; -- 2.30.2

3 years, 2 months

[PATCH] drm/i915:fix kernel-doc trivial warnings

by pengfuyuan

The test robot reports some make warnings. Fix those warnings: drivers/gpu/drm/i915/i915_gpu_error.c:2174: warning: Function parameter or member 'dump_flags' not described in 'i915_capture_error_state' drivers/gpu/drm/i915/i915_perf.c:5307: warning: Function parameter or member 'i915' not described in 'i915_perf_ioctl_version' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get' drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for' drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops' drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put' drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get' drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init' drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'wakeref' not described in 'i915_vma_resource' Reported-by: k2ci <kernel-bot(a)kylinos.cn> Signed-off-by: pengfuyuan <pengfuyuan(a)kylinos.cn> --- drivers/gpu/drm/i915/i915_active.h | 14 +++++++------- drivers/gpu/drm/i915/i915_gpu_error.c | 1 + drivers/gpu/drm/i915/i915_perf.c | 1 + drivers/gpu/drm/i915/i915_scatterlist.h | 9 +++++---- drivers/gpu/drm/i915/i915_utils.h | 6 ++++++ drivers/gpu/drm/i915/i915_vma_resource.h | 1 + 6 files changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_active.h b/drivers/gpu/drm/i915/i915_active.h index 7eb44132183a..77c676ecc263 100644 --- a/drivers/gpu/drm/i915/i915_active.h +++ b/drivers/gpu/drm/i915/i915_active.h @@ -49,9 +49,9 @@ void i915_active_noop(struct dma_fence *fence, struct dma_fence_cb *cb); /** * __i915_active_fence_init - prepares the activity tracker for use - * @active - the active tracker - * @fence - initial fence to track, can be NULL - * @func - a callback when then the tracker is retired (becomes idle), + * @active: the active tracker + * @fence: initial fence to track, can be NULL + * @fn: a callback when then the tracker is retired (becomes idle), * can be NULL * * i915_active_fence_init() prepares the embedded @active struct for use as @@ -77,8 +77,8 @@ __i915_active_fence_set(struct i915_active_fence *active, /** * i915_active_fence_set - updates the tracker to watch the current fence - * @active - the active tracker - * @rq - the request to watch + * @active: the active tracker + * @rq: the request to watch * * i915_active_fence_set() watches the given @rq for completion. While * that @rq is busy, the @active reports busy. When that @rq is signaled @@ -89,7 +89,7 @@ i915_active_fence_set(struct i915_active_fence *active, struct i915_request *rq); /** * i915_active_fence_get - return a reference to the active fence - * @active - the active tracker + * @active: the active tracker * * i915_active_fence_get() returns a reference to the active fence, * or NULL if the active tracker is idle. The reference is obtained under RCU, @@ -111,7 +111,7 @@ i915_active_fence_get(struct i915_active_fence *active) /** * i915_active_fence_isset - report whether the active tracker is assigned - * @active - the active tracker + * @active: the active tracker * * i915_active_fence_isset() returns true if the active tracker is currently * assigned to a fence. Due to the lazy retiring, that fence may be idle diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index f020c0086fbc..dae8b7ff9725 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -2162,6 +2162,7 @@ void i915_error_state_store(struct i915_gpu_coredump *error) * i915_capture_error_state - capture an error record for later analysis * @gt: intel_gt which originated the hang * @engine_mask: hung engines + * @dump_flags: flags specifying additional options for capturing the error state * * * Should be called when an error is detected (either a hang or an error diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 050b8ae7b8e7..2bbf359c18b3 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -5300,6 +5300,7 @@ void i915_perf_fini(struct drm_i915_private *i915) /** * i915_perf_ioctl_version - Version of the i915-perf subsystem + * @i915: i915 device instance * * This version number is used by userspace to detect available features. */ diff --git a/drivers/gpu/drm/i915/i915_scatterlist.h b/drivers/gpu/drm/i915/i915_scatterlist.h index b0a1db44f895..50b379bac6fd 100644 --- a/drivers/gpu/drm/i915/i915_scatterlist.h +++ b/drivers/gpu/drm/i915/i915_scatterlist.h @@ -154,6 +154,7 @@ bool i915_sg_trim(struct sg_table *orig_st); /** * struct i915_refct_sgt_ops - Operations structure for struct i915_refct_sgt + * @release: Free the memory of the struct i915_refct_sgt */ struct i915_refct_sgt_ops { /** @@ -167,7 +168,7 @@ struct i915_refct_sgt_ops { * struct i915_refct_sgt - A refcounted scatter-gather table * @kref: struct kref for refcounting * @table: struct sg_table holding the scatter-gather table itself. Note that - * @table->sgl = NULL can be used to determine whether a scatter-gather table + * table->sgl = NULL can be used to determine whether a scatter-gather table * is present or not. * @size: The size in bytes of the underlying memory buffer * @ops: The operations structure. @@ -181,7 +182,7 @@ struct i915_refct_sgt { /** * i915_refct_sgt_put - Put a refcounted sg-table - * @rsgt the struct i915_refct_sgt to put. + * @rsgt: the struct i915_refct_sgt to put. */ static inline void i915_refct_sgt_put(struct i915_refct_sgt *rsgt) { @@ -191,7 +192,7 @@ static inline void i915_refct_sgt_put(struct i915_refct_sgt *rsgt) /** * i915_refct_sgt_get - Get a refcounted sg-table - * @rsgt the struct i915_refct_sgt to get. + * @rsgt: the struct i915_refct_sgt to get. */ static inline struct i915_refct_sgt * i915_refct_sgt_get(struct i915_refct_sgt *rsgt) @@ -203,7 +204,7 @@ i915_refct_sgt_get(struct i915_refct_sgt *rsgt) /** * __i915_refct_sgt_init - Initialize a refcounted sg-list with a custom * operations structure - * @rsgt The struct i915_refct_sgt to initialize. + * @rsgt: The struct i915_refct_sgt to initialize. * @size: Size in bytes of the underlying memory buffer. * @ops: A customized operations structure in case the refcounted sg-list * is embedded into another structure. diff --git a/drivers/gpu/drm/i915/i915_utils.h b/drivers/gpu/drm/i915/i915_utils.h index 2c430c0c3bad..8e8d1f937e60 100644 --- a/drivers/gpu/drm/i915/i915_utils.h +++ b/drivers/gpu/drm/i915/i915_utils.h @@ -257,6 +257,12 @@ wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms) * important that we check the condition again after having timed out, since the * timeout could be due to preemption or similar and we've never had a chance to * check the condition before the timeout. + * + * @OP: operation to perform on each iteration. + * @COND: condition to check for. + * @US: timeout duration in microseconds. + * @Wmin: recommended minimum for usleep (in microseconds). + * @Wmax: maximum wait duration (in microseconds). */ #define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \ diff --git a/drivers/gpu/drm/i915/i915_vma_resource.h b/drivers/gpu/drm/i915/i915_vma_resource.h index c1864e3d0b43..6bb7d6d19216 100644 --- a/drivers/gpu/drm/i915/i915_vma_resource.h +++ b/drivers/gpu/drm/i915/i915_vma_resource.h @@ -49,6 +49,7 @@ struct i915_page_sizes { * @__subtree_last: Interval tree private member. * @vm: non-refcounted pointer to the vm. This is for internal use only and * this member is cleared after vm_resource unbind. + * @wakeref: wake reference for the resource. * @mr: The memory region of the object pointed to by the vma. * @ops: Pointer to the backend i915_vma_ops. * @private: Bind backend private info. -- 2.25.1 No virus found Checked by Hillstone Network AntiVirus

3 years, 2 months

[PATCH] dma-buf/sw_sync: Replace all non-returning strlcpy with strscpy

by Azeem Shaikh

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38(a)gmail.com> --- drivers/dma-buf/sw_sync.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma-buf/sw_sync.c b/drivers/dma-buf/sw_sync.c index 348b3a9170fa..63f0aeb66db6 100644 --- a/drivers/dma-buf/sw_sync.c +++ b/drivers/dma-buf/sw_sync.c @@ -85,7 +85,7 @@ static struct sync_timeline *sync_timeline_create(const char *name) kref_init(&obj->kref); obj->context = dma_fence_context_alloc(1); - strlcpy(obj->name, name, sizeof(obj->name)); + strscpy(obj->name, name, sizeof(obj->name)); obj->pt_tree = RB_ROOT; INIT_LIST_HEAD(&obj->pt_list);

3 years, 2 months

[Linux-kernel-mentorship] [PATCH] drm/amdgpu: remove excess parameter description in amdgpu_device.c

by Ziqi Zhao

This patch is part of the Linux Kernel Bug Fixing Summer screening tasks. By removing the extra description, several documentation compilation warnings such as the following have been fixed: > ./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:758: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg' Note: I assume the description can be safely removed based on this earlier patch: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/patch?id… Signed-off-by: Ziqi Zhao <astrajoan(a)yahoo.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 5c7d40873ee2..58d8f60c6a3a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -747,8 +747,6 @@ u64 amdgpu_device_indirect_rreg64(struct amdgpu_device *adev, * amdgpu_device_indirect_wreg - write an indirect register address * * @adev: amdgpu_device pointer - * @pcie_index: mmio register offset - * @pcie_data: mmio register offset * @reg_addr: indirect register offset * @reg_data: indirect register data * @@ -778,8 +776,6 @@ void amdgpu_device_indirect_wreg(struct amdgpu_device *adev, * amdgpu_device_indirect_wreg64 - write a 64bits indirect register address * * @adev: amdgpu_device pointer - * @pcie_index: mmio register offset - * @pcie_data: mmio register offset * @reg_addr: indirect register offset * @reg_data: indirect register data * -- 2.34.1

3 years, 2 months

[PATCH] drm/amdgpu: Modify mismatched function name

by Jiapeng Chong

No functional modification involved. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: expecting prototype for sdma_v4_4_2_gfx_stop(). Prototype was for sdma_v4_4_2_inst_gfx_stop() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: expecting prototype for sdma_v4_4_2_rlc_stop(). Prototype was for sdma_v4_4_2_inst_rlc_stop() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: expecting prototype for sdma_v4_4_2_page_stop(). Prototype was for sdma_v4_4_2_inst_page_stop() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: expecting prototype for sdma_v4_4_2_ctx_switch_enable(). Prototype was for sdma_v4_4_2_inst_ctx_switch_enable() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:561: warning: expecting prototype for sdma_v4_4_2_enable(). Prototype was for sdma_v4_4_2_inst_enable() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:798: warning: expecting prototype for sdma_v4_4_2_rlc_resume(). Prototype was for sdma_v4_4_2_inst_rlc_resume() instead. drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:814: warning: expecting prototype for sdma_v4_4_2_load_microcode(). Prototype was for sdma_v4_4_2_inst_load_microcode() instead. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5283 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c index bf47eb33c12e..590b08585901 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c @@ -415,7 +415,7 @@ static void sdma_v4_4_2_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 /** - * sdma_v4_4_2_gfx_stop - stop the gfx async dma engines + * sdma_v4_4_2_inst_gfx_stop - stop the gfx async dma engines * * @adev: amdgpu_device pointer * @@ -446,7 +446,7 @@ static void sdma_v4_4_2_inst_gfx_stop(struct amdgpu_device *adev, } /** - * sdma_v4_4_2_rlc_stop - stop the compute async dma engines + * sdma_v4_4_2_inst_rlc_stop - stop the compute async dma engines * * @adev: amdgpu_device pointer * @@ -459,7 +459,7 @@ static void sdma_v4_4_2_inst_rlc_stop(struct amdgpu_device *adev, } /** - * sdma_v4_4_2_page_stop - stop the page async dma engines + * sdma_v4_4_2_inst_page_stop - stop the page async dma engines * * @adev: amdgpu_device pointer * @@ -494,7 +494,7 @@ static void sdma_v4_4_2_inst_page_stop(struct amdgpu_device *adev, } /** - * sdma_v4_4_2_ctx_switch_enable - stop the async dma engines context switch + * sdma_v4_4_2_inst_ctx_switch_enable - stop the async dma engines context switch * * @adev: amdgpu_device pointer * @enable: enable/disable the DMA MEs context switch. @@ -548,7 +548,7 @@ static void sdma_v4_4_2_inst_ctx_switch_enable(struct amdgpu_device *adev, } /** - * sdma_v4_4_2_enable - stop the async dma engines + * sdma_v4_4_2_inst_enable - stop the async dma engines * * @adev: amdgpu_device pointer * @enable: enable/disable the DMA MEs. @@ -786,7 +786,7 @@ static void sdma_v4_4_2_init_pg(struct amdgpu_device *adev) } /** - * sdma_v4_4_2_rlc_resume - setup and start the async dma engines + * sdma_v4_4_2_inst_rlc_resume - setup and start the async dma engines * * @adev: amdgpu_device pointer * @@ -802,7 +802,7 @@ static int sdma_v4_4_2_inst_rlc_resume(struct amdgpu_device *adev, } /** - * sdma_v4_4_2_load_microcode - load the sDMA ME ucode + * sdma_v4_4_2_inst_load_microcode - load the sDMA ME ucode * * @adev: amdgpu_device pointer * -- 2.20.1.7.g153144c

3 years, 3 months

[PATCH] drm/amdgpu: Remove duplicate include

by Jiapeng Chong

./drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: amdgpu_xcp.h is included more than once. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5281 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c index e5cfb3adb3b3..7fb2d38b010a 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c @@ -23,7 +23,6 @@ #include <linux/firmware.h> #include "amdgpu.h" -#include "amdgpu_xcp.h" #include "amdgpu_gfx.h" #include "soc15.h" #include "soc15d.h" -- 2.20.1.7.g153144c

3 years, 3 months

[PATCH v13 0/2] drm: add kms driver for loongson display controller

by Sui Jingfeng

Loongson display controller IP has been integrated in both Loongson north bridge chipset(ls7a1000/ls7a2000) and Loongson SoCs(ls2k1000/ls2k2000), it has been even included in Loongson self-made BMC products. This display controller is a PCI device. It has two display pipes and each display pipe support a primary plane and a cursor plane. For the DC in the ls7a1000 and ls2k1000, each display pipe has a DVO output interface which provide RGB888 signals, vertical & horizontal synchronisations and pixel clock. Each CRTC is able to support 1920x1080@60Hz, the maximum resolution of each display pipe is 2048x2048 according to the hardware spec. For the DC in LS7A2000, each display pipe is equipped with a built-in HDMI encoder which is compliant with the HDMI 1.4 specification, thus it support 3840x2160@30Hz. The first display pipe is also equipped with a transparent vga encoder which is parallel with the HDMI encoder. The DC in LS7A2000 is more complete compare with the one in old chips, besides above feature, it has two hardware cursors, two hardware vblank counter and two scanout position recorders unit. It also support tiled framebuffer format which can be scanout the tiled framebuffer rendered by the LoongGPU directly. v1 -> v2: 1) Use hpd status reg when polling for ls7a2000 2) Fix all warnings emerged when compile with W=1 v2 -> v3: 1) Add COMPILE_TEST in Kconfig and make the driver off by default 2) Alphabetical sorting headers (Thomas) 3) Untangle register access functions as much as possible (Thomas) 4) Switch to TTM based memory manager and prefer cached mapping for Loongson SoC (Thomas) 5) Add chip id detection method, now all models are distinguishable. 6) Revise builtin HDMI phy driver, nearly all main stream mode below 4K@30Hz is tested, this driver supported these mode very well including clone display mode and extend display mode. v3 -> v4: 1) Quickly fix a small mistake. v4 -> v5: 1) Drop potential support for Loongson 2K series SoC temporary, this part should be resend with the DT binding patch in the future. 2) Add per display pipe debugfs support to the builtin HDMI encoder. 3) Rewrite atomic_update() for hardware cursors plane(Thomas) 4) Rewrite encoder and connector initialization part, untangle it according to the chip(Thomas). v5 -> v6: 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram 2) Fix all typos I could found, make sentences and code more readable 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe 4) After a serious consideration, we rename this driver as loongson. Because we also have drivers toward the LoongGPU IP in LS7A2000 and LS2K2000. Besides, there are also drivers about the external encoder, HDMI audio driver and vbios support etc. This patch only provide DC driver part, my teammate Li Yi believe that loongson will be more suitable for loongson graphics than lsdc in the long run. loongson.ko = LSDC + LoongGPU + encoders driver + vbios/DT ... v6 -> v7: 1) Add prime support, self-sharing is works. sharing buffer with etnaviv is also tested, and its works with limitation. 2) Implement buffer objects tracking with list_head. 3) S3(sleep to RAM) is tested on ls3a5000+ls7a2000 evb and it works. 4) Rewrite lsdc_bo_move, since ttm core stop allocating resources during BO creation. Patch V1 ~ V6 of this series no longer works on latest kernel. Thus, we send V7 to revival them. v7 -> v8: 1) Zero a compile warnnings on 32-bit platform, compile with W=1 2) Revise lsdc_bo_gpu_offset() and minor cleanup 3) Pageflip tested on the virtual terminal with following commands modetest -M loongson -s 32:1920x1080 -v modetest -M loongson -s 34:1920x1080 -v -F tiles It works like a charm, when running pageflip test with dual screnn configuration, another two additional bo created by the modetest emerged, VRAM usage up to 40+MB, well we have at least 64MB, still enough. # cat bos bo[0000]: size: 8112kB VRAM bo[0001]: size: 16kB VRAM bo[0002]: size: 16kB VRAM bo[0003]: size: 16208kB VRAM bo[0004]: size: 8112kB VRAM bo[0005]: size: 8112kB VRAM v8 -> v9: 1) Select I2C and I2C_ALGOBIT in Kconfig and should depend on MMU. 2) Using pci_get_domain_bus_and_slot to get the GPU device. 3) Other minor improvements. Those patches are tested on ls3a5000 + ls7a1000 CRB, ls3a5000 + ls7a2000 evb, and lemote a1901 board(ls3a4000 + ls7a1000). On loongson mips CPU, the write combine support should be enabled, to get a decent performance for writing framebuffer data to the VRAM. v9 -> v10: 1) Revise lsdc_drm_freeze() to implement S3 completely and correctly. I suddenly realized that pinned buffer can not move and VRAM lost power when sleep to RAM. Thus, the data in the buffer who is pinned in VRAM will get lost when resume. Yet it's not big problem because we are software rendering solution which relay on the CPU update the front framebuffer. We can see the garbage data when resume from S3, but the screen will show correct image as I move the cursor. This is due to the cpu repaint. v10 of this patch make S3 perfect by unpin all of BOs in VRAM, evict them all to system RAM. v10 -> v11: 1) On double screen case, the single giant framebuffer is referenced by two GEM object, hence, it will be pinned by prepare_fb() at lease two times. This cause its pin count > 1. V10 of this patch only unpin VRAM BOs once when suspend, which is not correct on double screen case. V11 of this patch unpin BOs until its pin count reach to zero when suspend. Then, we make the S3 support complete finally. With v11, I can't see any garbage data after resume. Tested on both ls7a1000 and ls7a2000 platform, with single screen and double screen configuration. 2) Fix vblank wait timeout when disable CRTC. 3) Test against IGT, at least fbdev test and kms_flip test passed. 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil) 5) Drop a few common hardware features description in lsdc_desc (Emil) 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb create function. (Emil) 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas) v11 -> v12: none v12 -> v13: 1) Add benchmark to figure out the bandwidth of the hardware platform. Usage: # cd /sys/kernel/debug/dri/0/ # cat benchmark 2) VRAM is filled with garbage data if uninitialized, add a buffer clearing procedure, clear it on the BO creation time. 3) Update copyrights and adjust coding style (Huacai) Sui Jingfeng (2): drm: add kms driver for loongson display controller MAINTAINERS: add maintainers for DRM LOONGSON driver MAINTAINERS | 8 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 21 + drivers/gpu/drm/loongson/ls7a1000_outputs.c | 161 +++ drivers/gpu/drm/loongson/ls7a2000_outputs.c | 531 +++++++++ drivers/gpu/drm/loongson/lsdc_benchmark.c | 132 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1068 +++++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 91 ++ drivers/gpu/drm/loongson/lsdc_device.c | 104 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 484 +++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 452 ++++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 324 ++++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 ++++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 81 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 639 +++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 400 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 610 +++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ 31 files changed, 6406 insertions(+) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/ls7a1000_outputs.c create mode 100644 drivers/gpu/drm/loongson/ls7a2000_outputs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_device.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h -- 2.25.1

3 years, 3 months

[PATCH v14 0/2] drm: add kms driver for loongson display controller

by Sui Jingfeng

Loongson display controller IP has been integrated in both Loongson north bridge chipset(ls7a1000/ls7a2000) and Loongson SoCs(ls2k1000/ls2k2000), it has been even included in Loongson self-made BMC products. This display controller is a PCI device. It has two display pipes and each display pipe support a primary plane and a cursor plane. For the DC in the ls7a1000 and ls2k1000, each display pipe has a DVO output interface which provide RGB888 signals, vertical & horizontal synchronisations and pixel clock. Each CRTC is able to support 1920x1080@60Hz, the maximum resolution of each display pipe is 2048x2048 according to the hardware spec. For the DC in LS7A2000, each display pipe is equipped with a built-in HDMI encoder which is compliant with the HDMI 1.4 specification, thus it support 3840x2160@30Hz. The first display pipe is also equipped with a transparent vga encoder which is parallel with the HDMI encoder. The DC in LS7A2000 is more complete compare with the one in old chips, besides above feature, it has two hardware cursors, two hardware vblank counter and two scanout position recorders unit. It also support tiled framebuffer format which can be scanout the tiled framebuffer rendered by the LoongGPU directly. v1 -> v2: 1) Use hpd status reg when polling for ls7a2000 2) Fix all warnings emerged when compile with W=1 v2 -> v3: 1) Add COMPILE_TEST in Kconfig and make the driver off by default 2) Alphabetical sorting headers (Thomas) 3) Untangle register access functions as much as possible (Thomas) 4) Switch to TTM based memory manager and prefer cached mapping for Loongson SoC (Thomas) 5) Add chip id detection method, now all models are distinguishable. 6) Revise builtin HDMI phy driver, nearly all main stream mode below 4K@30Hz is tested, this driver supported these mode very well including clone display mode and extend display mode. v3 -> v4: 1) Quickly fix a small mistake. v4 -> v5: 1) Drop potential support for Loongson 2K series SoC temporary, this part should be resend with the DT binding patch in the future. 2) Add per display pipe debugfs support to the builtin HDMI encoder. 3) Rewrite atomic_update() for hardware cursors plane(Thomas) 4) Rewrite encoder and connector initialization part, untangle it according to the chip(Thomas). v5 -> v6: 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram 2) Fix all typos I could found, make sentences and code more readable 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe 4) After a serious consideration, we rename this driver as loongson. Because we also have drivers toward the LoongGPU IP in LS7A2000 and LS2K2000. Besides, there are also drivers about the external encoder, HDMI audio driver and vbios support etc. This patch only provide DC driver part, my teammate Li Yi believe that loongson will be more suitable for loongson graphics than lsdc in the long run. loongson.ko = LSDC + LoongGPU + encoders driver + vbios/DT ... v6 -> v7: 1) Add prime support, self-sharing is works. sharing buffer with etnaviv is also tested, and its works with limitation. 2) Implement buffer objects tracking with list_head. 3) S3(sleep to RAM) is tested on ls3a5000+ls7a2000 evb and it works. 4) Rewrite lsdc_bo_move, since ttm core stop allocating resources during BO creation. Patch V1 ~ V6 of this series no longer works on latest kernel. Thus, we send V7 to revival them. v7 -> v8: 1) Zero a compile warnnings on 32-bit platform, compile with W=1 2) Revise lsdc_bo_gpu_offset() and minor cleanup 3) Pageflip tested on the virtual terminal with following commands modetest -M loongson -s 32:1920x1080 -v modetest -M loongson -s 34:1920x1080 -v -F tiles It works like a charm, when running pageflip test with dual screnn configuration, another two additional bo created by the modetest emerged, VRAM usage up to 40+MB, well we have at least 64MB, still enough. # cat bos bo[0000]: size: 8112kB VRAM bo[0001]: size: 16kB VRAM bo[0002]: size: 16kB VRAM bo[0003]: size: 16208kB VRAM bo[0004]: size: 8112kB VRAM bo[0005]: size: 8112kB VRAM v8 -> v9: 1) Select I2C and I2C_ALGOBIT in Kconfig and should depend on MMU. 2) Using pci_get_domain_bus_and_slot to get the GPU device. 3) Other minor improvements. Those patches are tested on ls3a5000 + ls7a1000 CRB, ls3a5000 + ls7a2000 evb, and lemote a1901 board(ls3a4000 + ls7a1000). On loongson mips CPU, the write combine support should be enabled, to get a decent performance for writing framebuffer data to the VRAM. v9 -> v10: 1) Revise lsdc_drm_freeze() to implement S3 completely and correctly. I suddenly realized that pinned buffer can not move and VRAM lost power when sleep to RAM. Thus, the data in the buffer who is pinned in VRAM will get lost when resume. Yet it's not big problem because we are software rendering solution which relay on the CPU update the front framebuffer. We can see the garbage data when resume from S3, but the screen will show correct image as I move the cursor. This is due to the cpu repaint. v10 of this patch make S3 perfect by unpin all of BOs in VRAM, evict them all to system RAM. v10 -> v11: 1) On double screen case, the single giant framebuffer is referenced by two GEM object, hence, it will be pinned by prepare_fb() at lease two times. This cause its pin count > 1. V10 of this patch only unpin VRAM BOs once when suspend, which is not correct on double screen case. V11 of this patch unpin BOs until its pin count reach to zero when suspend. Then, we make the S3 support complete finally. With v11, I can't see any garbage data after resume. Tested on both ls7a1000 and ls7a2000 platform, with single screen and double screen configuration. 2) Fix vblank wait timeout when disable CRTC. 3) Test against IGT, at least fbdev test and kms_flip test passed. 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil) 5) Drop a few common hardware features description in lsdc_desc (Emil) 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb create function. (Emil) 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas) v11 -> v12: none v12 -> v13: 1) Add benchmark to figure out the bandwidth of the hardware platform. Usage: # cd /sys/kernel/debug/dri/0/ # cat benchmark 2) VRAM is filled with garbage data if uninitialized, add a buffer clearing procedure, clear it on the BO creation time. 3) Update copyrights and adjust coding style (Huacai) v13 -> v14: 1) Trying to add async update support for cursor plane. Sui Jingfeng (2): drm: add kms driver for loongson display controller MAINTAINERS: add maintainers for DRM LOONGSON driver MAINTAINERS | 8 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 20 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 ++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1066 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 91 ++ drivers/gpu/drm/loongson/lsdc_device.c | 104 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 495 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 451 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 324 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 +++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 71 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 161 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 531 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 781 ++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 402 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 610 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ 31 files changed, 6548 insertions(+) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_device.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h -- 2.25.1

3 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig