Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

20 participants
7080 discussions

[PATCH v4] mtd: rawnand: macronix: OTP access for MX30LFxG18AC

by Arseniy Krasnov

This adds support for OTP area access on MX30LFxG18AC chip series. Signed-off-by: Arseniy Krasnov <AVKrasnov(a)sberdevices.ru> --- v1 -> v2: * Add slab.h include due to kernel test robot error. v2 -> v3: * Use 'uint64_t' as input argument for 'do_div()' instead of 'unsigned long' due to kernel test robot error. v3 -> v4: * Use 'dev_err()' instead of 'WARN()'. * Call 'match_string()' before checking 'supports_set_get_features' in 'macronix_nand_setup_otp(). * Use 'u8' instead of 'uint8_t' as ./checkpatch.pl wants. drivers/mtd/nand/raw/nand_macronix.c | 216 +++++++++++++++++++++++++++ 1 file changed, 216 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 1472f925f386..be1ffa93bebb 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -6,6 +6,7 @@ * Author: Boris Brezillon <boris.brezillon(a)free-electrons.com> */ +#include <linux/slab.h> #include "linux/delay.h" #include "internals.h" @@ -31,6 +32,20 @@ #define MXIC_CMD_POWER_DOWN 0xB9 +#define ONFI_FEATURE_ADDR_30LFXG18AC_OTP 0x90 +#define MACRONIX_30LFXG18AC_OTP_START_PAGE 0 +#define MACRONIX_30LFXG18AC_OTP_PAGES 30 +#define MACRONIX_30LFXG18AC_OTP_PAGE_SIZE 2112 +#define MACRONIX_30LFXG18AC_OTP_START_BYTE \ + (MACRONIX_30LFXG18AC_OTP_START_PAGE * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) +#define MACRONIX_30LFXG18AC_OTP_SIZE_BYTES \ + (MACRONIX_30LFXG18AC_OTP_PAGES * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) + +#define MACRONIX_30LFXG18AC_OTP_EN BIT(0) +#define MACRONIX_30LFXG18AC_OTP_LOCKED BIT(1) + struct nand_onfi_vendor_macronix { u8 reserved; u8 reliability_func; @@ -316,6 +331,206 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip) chip->ops.resume = mxic_nand_resume; } +static int macronix_30lfxg18ac_get_otp_info(struct mtd_info *mtd, size_t len, + size_t *retlen, + struct otp_info *buf) +{ + if (len < sizeof(*buf)) + return -EINVAL; + + /* Don't know how to check that OTP is locked. */ + buf->locked = 0; + buf->start = MACRONIX_30LFXG18AC_OTP_START_BYTE; + buf->length = MACRONIX_30LFXG18AC_OTP_SIZE_BYTES; + + *retlen = sizeof(*buf); + + return 0; +} + +static int macronix_30lfxg18ac_otp_enable(struct nand_chip *nand) +{ + u8 feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN; + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int macronix_30lfxg18ac_otp_disable(struct nand_chip *nand) +{ + u8 feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd, + loff_t offs_in_flash, + size_t len, size_t *retlen, + u_char *buf, bool write) +{ + struct nand_chip *nand; + size_t bytes_handled; + off_t offs_in_page; + void *dma_buf; + u64 page; + int ret; + + /* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer, + * so allocate properly aligned memory for it. This is + * needed because cross page accesses may lead to unaligned + * buffer address for DMA. + */ + dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL); + if (!dma_buf) + return -ENOMEM; + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + ret = macronix_30lfxg18ac_otp_enable(nand); + if (ret) + goto out_otp; + + page = offs_in_flash; + /* 'page' will be result of division. */ + offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE); + bytes_handled = 0; + + while (bytes_handled < len && + page < MACRONIX_30LFXG18AC_OTP_PAGES) { + size_t bytes_to_handle; + + bytes_to_handle = min_t(size_t, len - bytes_handled, + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE - + offs_in_page); + + if (write) { + memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle); + ret = nand_prog_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + } else { + ret = nand_read_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + if (!ret) + memcpy(&buf[bytes_handled], dma_buf, + bytes_to_handle); + } + if (ret) + goto out_otp; + + bytes_handled += bytes_to_handle; + offs_in_page = 0; + page++; + } + + *retlen = bytes_handled; + +out_otp: + if (ret) + dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + if (ret) + dev_err(&mtd->dev, "failed to leave OTP mode after %s\n", + write ? "write" : "read"); + + nand_deselect_target(nand); + kfree(dma_buf); + + return ret; +} + +static int macronix_30lfxg18ac_write_otp(struct mtd_info *mtd, loff_t to, + size_t len, size_t *rlen, + const u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, to, len, rlen, (u_char *)buf, + true); +} + +static int macronix_30lfxg18ac_read_otp(struct mtd_info *mtd, loff_t from, + size_t len, size_t *rlen, + u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, from, len, rlen, buf, false); +} + +static int macronix_30lfxg18ac_lock_otp(struct mtd_info *mtd, loff_t from, + size_t len) +{ + u8 feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + struct nand_chip *nand; + int ret; + + if (from != MACRONIX_30LFXG18AC_OTP_START_BYTE || + len != MACRONIX_30LFXG18AC_OTP_SIZE_BYTES) + return -EINVAL; + + dev_dbg(&mtd->dev, "locking OTP\n"); + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN | + MACRONIX_30LFXG18AC_OTP_LOCKED; + ret = nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); + if (ret) { + dev_err(&mtd->dev, + "failed to lock OTP (set features): %i\n", ret); + nand_deselect_target(nand); + return ret; + } + + /* Do dummy page prog with zero address. */ + feature_buf[0] = 0; + ret = nand_prog_page_op(nand, 0, 0, feature_buf, 1); + if (ret) + dev_err(&mtd->dev, + "failed to lock OTP (page prog): %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + if (ret) + dev_err(&mtd->dev, "failed to leave OTP mode after lock\n"); + + nand_deselect_target(nand); + + return ret; +} + +static void macronix_nand_setup_otp(struct nand_chip *chip) +{ + static const char * const supported_otp_models[] = { + "MX30LF1G18AC", + "MX30LF2G18AC", + "MX30LF4G18AC", + }; + struct mtd_info *mtd; + + if (match_string(supported_otp_models, + ARRAY_SIZE(supported_otp_models), + chip->parameters.model) < 0) + return; + + if (!chip->parameters.supports_set_get_features) + return; + + bitmap_set(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + bitmap_set(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + + mtd = nand_to_mtd(chip); + mtd->_get_fact_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_fact_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_get_user_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_user_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_write_user_prot_reg = macronix_30lfxg18ac_write_otp; + mtd->_lock_user_prot_reg = macronix_30lfxg18ac_lock_otp; +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) @@ -325,6 +540,7 @@ static int macronix_nand_init(struct nand_chip *chip) macronix_nand_onfi_init(chip); macronix_nand_block_protection_support(chip); macronix_nand_deep_power_down_support(chip); + macronix_nand_setup_otp(chip); return 0; } -- 2.35.0

3 years

Re: [syzbot] kernel BUG in vmf_insert_pfn_prot

by syzbot

syzbot suspects this issue was fixed by commit: commit a5b44c4adb1699661d22e5152fb26885f30a2e4c Author: Thomas Zimmermann <tzimmermann(a)suse.de> Date: Mon Mar 20 15:07:44 2023 +0000 drm/fbdev-generic: Always use shadow buffering bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=1025ee07280000 start commit: 0326074ff465 Merge tag 'net-next-6.1' of git://git.kernel... git tree: upstream kernel config: https://syzkaller.appspot.com/x/.config?x=d323d85b1f8a4ed7 dashboard link: https://syzkaller.appspot.com/bug?extid=2d4f8693f438d2bd4bdb syz repro: https://syzkaller.appspot.com/x/repro.syz?x=14fd1182880000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=17567514880000 If the result looks correct, please mark the issue as fixed by replying with: #syz fix: drm/fbdev-generic: Always use shadow buffering For information about bisection process see: https://goo.gl/tpsmEJ#bisection

3 years

[PATCH v14 0/2] drm: add kms driver for loongson display controller

by Sui Jingfeng

From: Sui Jingfeng <suijingfeng(a)loongson.cn> Loongson display controller IP has been integrated in both Loongson north bridge chipset(ls7a1000/ls7a2000) and Loongson SoCs(ls2k1000/ls2k2000), it has been even included in Loongson self-made BMC products. This display controller is a PCI device. It has two display pipes and each display pipe support a primary plane and a cursor plane. For the DC in the ls7a1000 and ls2k1000, each display pipe has a DVO output interface which provide RGB888 signals, vertical & horizontal synchronisations and pixel clock. Each CRTC is able to support 1920x1080@60Hz, the maximum resolution of each display pipe is 2048x2048 according to the hardware spec. For the DC in LS7A2000, each display pipe is equipped with a built-in HDMI encoder which is compliant with the HDMI 1.4 specification, thus it support 3840x2160@30Hz. The first display pipe is also equipped with a transparent vga encoder which is parallel with the HDMI encoder. The DC in LS7A2000 is more complete compare with the one in old chips, besides above feature, it has two hardware cursors, two hardware vblank counter and two scanout position recorders unit. It also support tiled framebuffer format which can be scanout the tiled framebuffer rendered by the LoongGPU directly. v1 -> v2: 1) Use hpd status reg when polling for ls7a2000 2) Fix all warnings emerged when compile with W=1 v2 -> v3: 1) Add COMPILE_TEST in Kconfig and make the driver off by default 2) Alphabetical sorting headers (Thomas) 3) Untangle register access functions as much as possible (Thomas) 4) Switch to TTM based memory manager and prefer cached mapping for Loongson SoC (Thomas) 5) Add chip id detection method, now all models are distinguishable. 6) Revise builtin HDMI phy driver, nearly all main stream mode below 4K@30Hz is tested, this driver supported these mode very well including clone display mode and extend display mode. v3 -> v4: 1) Quickly fix a small mistake. v4 -> v5: 1) Drop potential support for Loongson 2K series SoC temporary, this part should be resend with the DT binding patch in the future. 2) Add per display pipe debugfs support to the builtin HDMI encoder. 3) Rewrite atomic_update() for hardware cursors plane(Thomas) 4) Rewrite encoder and connector initialization part, untangle it according to the chip(Thomas). v5 -> v6: 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram 2) Fix all typos I could found, make sentences and code more readable 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe 4) After a serious consideration, we rename this driver as loongson. Because we also have drivers toward the LoongGPU IP in LS7A2000 and LS2K2000. Besides, there are also drivers about the external encoder, HDMI audio driver and vbios support etc. This patch only provide DC driver part, my teammate Li Yi believe that loongson will be more suitable for loongson graphics than lsdc in the long run. loongson.ko = LSDC + LoongGPU + encoders driver + vbios/DT ... v6 -> v7: 1) Add prime support, self-sharing is works. sharing buffer with etnaviv is also tested, and its works with limitation. 2) Implement buffer objects tracking with list_head. 3) S3(sleep to RAM) is tested on ls3a5000+ls7a2000 evb and it works. 4) Rewrite lsdc_bo_move, since ttm core stop allocating resources during BO creation. Patch V1 ~ V6 of this series no longer works on latest kernel. Thus, we send V7 to revival them. v7 -> v8: 1) Zero a compile warnnings on 32-bit platform, compile with W=1 2) Revise lsdc_bo_gpu_offset() and minor cleanup 3) Pageflip tested on the virtual terminal with following commands modetest -M loongson -s 32:1920x1080 -v modetest -M loongson -s 34:1920x1080 -v -F tiles It works like a charm, when running pageflip test with dual screnn configuration, another two additional bo created by the modetest emerged, VRAM usage up to 40+MB, well we have at least 64MB, still enough. # cat bos bo[0000]: size: 8112kB VRAM bo[0001]: size: 16kB VRAM bo[0002]: size: 16kB VRAM bo[0003]: size: 16208kB VRAM bo[0004]: size: 8112kB VRAM bo[0005]: size: 8112kB VRAM v8 -> v9: 1) Select I2C and I2C_ALGOBIT in Kconfig and should depend on MMU. 2) Using pci_get_domain_bus_and_slot to get the GPU device. 3) Other minor improvements. Those patches are tested on ls3a5000 + ls7a1000 CRB, ls3a5000 + ls7a2000 evb, and lemote a1901 board(ls3a4000 + ls7a1000). On loongson mips CPU, the write combine support should be enabled, to get a decent performance for writing framebuffer data to the VRAM. v9 -> v10: 1) Revise lsdc_drm_freeze() to implement S3 completely and correctly. I suddenly realized that pinned buffer can not move and VRAM lost power when sleep to RAM. Thus, the data in the buffer who is pinned in VRAM will get lost when resume. Yet it's not big problem because we are software rendering solution which relay on the CPU update the front framebuffer. We can see the garbage data when resume from S3, but the screen will show correct image as I move the cursor. This is due to the cpu repaint. v10 of this patch make S3 perfect by unpin all of BOs in VRAM, evict them all to system RAM. v10 -> v11: 1) On double screen case, the single giant framebuffer is referenced by two GEM object, hence, it will be pinned by prepare_fb() at lease two times. This cause its pin count > 1. V10 of this patch only unpin VRAM BOs once when suspend, which is not correct on double screen case. V11 of this patch unpin BOs until its pin count reach to zero when suspend. Then, we make the S3 support complete finally. With v11, I can't see any garbage data after resume. Tested on both ls7a1000 and ls7a2000 platform, with single screen and double screen configuration. 2) Fix vblank wait timeout when disable CRTC. 3) Test against IGT, at least fbdev test and kms_flip test passed. 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil) 5) Drop a few common hardware features description in lsdc_desc (Emil) 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb create function. (Emil) 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas) v11 -> v12: none v12 -> v13: 1) Add benchmark to figure out the bandwidth of the hardware platform. Usage: # cd /sys/kernel/debug/dri/0/ # cat benchmark 2) VRAM is filled with garbage data if uninitialized, add a buffer clearing procedure, clear it on the BO creation time. 3) Update copyrights and adjust coding style (Huacai) v13 -> v14: 1) Trying to add async update support for cursor plane. Sui Jingfeng (2): drm: add kms driver for loongson display controller MAINTAINERS: add maintainers for DRM LOONGSON driver MAINTAINERS | 8 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 20 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 ++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1066 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 91 ++ drivers/gpu/drm/loongson/lsdc_device.c | 104 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 495 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 451 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 324 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 +++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 71 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 161 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 531 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 781 ++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 402 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 610 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ 31 files changed, 6548 insertions(+) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_device.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h -- 2.25.1

3 years

[PATCH] accel/qaic: Fix dereferencing freed memory

by Sukrut Bellary

smatch warning: drivers/accel/qaic/qaic_data.c:620 qaic_free_object() error: dereferencing freed memory 'obj->import_attach' obj->import_attach is detached and freed using dma_buf_detach(). But used after free to decrease the dmabuf ref count using dma_buf_put(). Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Sukrut Bellary <sukrut.bellary(a)linux.com> --- drivers/accel/qaic/qaic_data.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/accel/qaic/qaic_data.c b/drivers/accel/qaic/qaic_data.c index e42c1f9ffff8..7cba4d680ea8 100644 --- a/drivers/accel/qaic/qaic_data.c +++ b/drivers/accel/qaic/qaic_data.c @@ -613,11 +613,13 @@ static int qaic_gem_object_mmap(struct drm_gem_object *obj, struct vm_area_struc static void qaic_free_object(struct drm_gem_object *obj) { struct qaic_bo *bo = to_qaic_bo(obj); + struct dma_buf *dmabuf; if (obj->import_attach) { /* DMABUF/PRIME Path */ + dmabuf = obj->import_attach->dmabuf; dma_buf_detach(obj->import_attach->dmabuf, obj->import_attach); - dma_buf_put(obj->import_attach->dmabuf); + dma_buf_put(dmabuf); } else { /* Private buffer allocation path */ qaic_free_sgt(bo->sgt); -- 2.34.1

3 years

[RESEND 00/15] Rid W=1 warnings from GPU

by Lee Jones

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings. Lee Jones (15): drm/xlnx/zynqmp_disp: Use correct kerneldoc formatting in zynqmp_disp drm/xlnx/zynqmp_dp: Fix function name zynqmp_dp_link_train() -> zynqmp_dp_train() drm/vkms/vkms_composer: Fix a few different kerneldoc formatting drm/mediatek/mtk_disp_aal: Remove half completed incorrect struct header drm/mediatek/mtk_disp_ccorr: Remove half completed incorrect struct header drm/nouveau/nvkm/subdev/acr/lsfw: Remove unused variable 'loc' drm/nouveau/nvkm/subdev/bios/init: Demote a bunch of kernel-doc abuses drm/nouveau/nvkm/subdev/volt/gk20a: Demote kerneldoc abuses drm/nouveau/nvkm/engine/gr/gf100: Demote kerneldoc abuse drm/nouveau/nvkm/engine/gr/tu102: Staticify local function gf100_fifo_nonstall_block() drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef drm/nouveau/dispnv04/crtc: Demote kerneldoc abuses drm/nouveau/nvkm/engine/gr/tu102: Completely remove unused function ‘tu102_gr_load’ drm/radeon/radeon_ttm: Remove unused variable 'rbo' from radeon_bo_move() drm/amd/amdgpu/sdma_v6_0: Demote a bunch of half-completed function headers drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c | 8 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 6 +- drivers/gpu/drm/mediatek/mtk_disp_aal.c | 5 - drivers/gpu/drm/mediatek/mtk_disp_ccorr.c | 5 - drivers/gpu/drm/nouveau/dispnv04/crtc.c | 4 +- .../gpu/drm/nouveau/nvkm/engine/gr/gf100.c | 2 +- .../gpu/drm/nouveau/nvkm/engine/gr/tu102.c | 13 -- .../gpu/drm/nouveau/nvkm/subdev/acr/lsfw.c | 3 +- .../gpu/drm/nouveau/nvkm/subdev/bios/init.c | 136 +++++++++--------- .../gpu/drm/nouveau/nvkm/subdev/volt/gk20a.c | 4 +- drivers/gpu/drm/radeon/radeon_ttm.c | 2 - drivers/gpu/drm/vkms/vkms_composer.c | 6 +- drivers/gpu/drm/xlnx/zynqmp_disp.c | 6 +- drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +- 14 files changed, 89 insertions(+), 113 deletions(-) Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: amd-gfx(a)lists.freedesktop.org Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> Cc: Ben Skeggs <bskeggs(a)redhat.com> Cc: "Christian König" <christian.koenig(a)amd.com> Cc: Chun-Kuang Hu <chunkuang.hu(a)kernel.org> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: David Airlie <airlied(a)gmail.com> Cc: dri-devel(a)lists.freedesktop.org Cc: Gourav Samaiya <gsamaiya(a)nvidia.com> Cc: Haneen Mohammed <hamohammed.sa(a)gmail.com> Cc: Harry Wentland <harry.wentland(a)amd.com> Cc: Hyun Kwon <hyun.kwon(a)xilinx.com> Cc: Jerome Glisse <glisse(a)freedesktop.org> Cc: Karol Herbst <kherbst(a)redhat.com> Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: Leo Li <sunpeng.li(a)amd.com> Cc: linaro-mm-sig(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-mediatek(a)lists.infradead.org Cc: linux-media(a)vger.kernel.org Cc: Lyude Paul <lyude(a)redhat.com> Cc: Matthias Brugger <matthias.bgg(a)gmail.com> Cc: Melissa Wen <melissa.srw(a)gmail.com> Cc: Michal Simek <michal.simek(a)xilinx.com> Cc: nouveau(a)lists.freedesktop.org Cc: "Pan, Xinhui" <Xinhui.Pan(a)amd.com> Cc: Philipp Zabel <p.zabel(a)pengutronix.de> Cc: Rodrigo Siqueira <Rodrigo.Siqueira(a)amd.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo(a)gmail.com> Cc: Stanley Yang <Stanley.Yang(a)amd.com> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> -- 2.41.0.162.gfafddb0af9-goog

3 years

[PATCH v2] drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl

by Min Li

Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free. Signed-off-by: Min Li <lm0963hack(a)gmail.com> --- Changes in v2: - Remove unused robj, avoid compile complain drivers/gpu/drm/radeon/radeon_gem.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index bdc5af23f005..d3f5ddbc1704 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -459,7 +459,6 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, struct radeon_device *rdev = dev->dev_private; struct drm_radeon_gem_set_domain *args = data; struct drm_gem_object *gobj; - struct radeon_bo *robj; int r; /* for now if someone requests domain CPU - @@ -472,13 +471,12 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, up_read(&rdev->exclusive_lock); return -ENOENT; } - robj = gem_to_radeon_bo(gobj); r = radeon_gem_set_domain(gobj, args->read_domains, args->write_domain); drm_gem_object_put(gobj); up_read(&rdev->exclusive_lock); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; } -- 2.34.1

3 years, 1 month

[RESEND PATCH v3] mtd: rawnand: macronix: OTP access for MX30LFxG18AC

by Arseniy Krasnov

This adds support for OTP area access on MX30LFxG18AC chip series. Changelog: v1 -> v2: * Add slab.h include due to kernel test robot error. v2 -> v3: * Use 'uint64_t' as input argument for 'do_div()' instead of 'unsigned long' due to kernel test robot error. Signed-off-by: Arseniy Krasnov <AVKrasnov(a)sberdevices.ru> --- drivers/mtd/nand/raw/nand_macronix.c | 213 +++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 1472f925f386..2301f990678e 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -6,6 +6,7 @@ * Author: Boris Brezillon <boris.brezillon(a)free-electrons.com> */ +#include <linux/slab.h> #include "linux/delay.h" #include "internals.h" @@ -31,6 +32,20 @@ #define MXIC_CMD_POWER_DOWN 0xB9 +#define ONFI_FEATURE_ADDR_30LFXG18AC_OTP 0x90 +#define MACRONIX_30LFXG18AC_OTP_START_PAGE 0 +#define MACRONIX_30LFXG18AC_OTP_PAGES 30 +#define MACRONIX_30LFXG18AC_OTP_PAGE_SIZE 2112 +#define MACRONIX_30LFXG18AC_OTP_START_BYTE \ + (MACRONIX_30LFXG18AC_OTP_START_PAGE * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) +#define MACRONIX_30LFXG18AC_OTP_SIZE_BYTES \ + (MACRONIX_30LFXG18AC_OTP_PAGES * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) + +#define MACRONIX_30LFXG18AC_OTP_EN BIT(0) +#define MACRONIX_30LFXG18AC_OTP_LOCKED BIT(1) + struct nand_onfi_vendor_macronix { u8 reserved; u8 reliability_func; @@ -316,6 +331,203 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip) chip->ops.resume = mxic_nand_resume; } +static int macronix_30lfxg18ac_get_otp_info(struct mtd_info *mtd, size_t len, + size_t *retlen, + struct otp_info *buf) +{ + if (len < sizeof(*buf)) + return -EINVAL; + + /* Don't know how to check that OTP is locked. */ + buf->locked = 0; + buf->start = MACRONIX_30LFXG18AC_OTP_START_BYTE; + buf->length = MACRONIX_30LFXG18AC_OTP_SIZE_BYTES; + + *retlen = sizeof(*buf); + + return 0; +} + +static int macronix_30lfxg18ac_otp_enable(struct nand_chip *nand) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN; + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int macronix_30lfxg18ac_otp_disable(struct nand_chip *nand) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd, + loff_t offs_in_flash, + size_t len, size_t *retlen, + u_char *buf, bool write) +{ + struct nand_chip *nand; + size_t bytes_handled; + off_t offs_in_page; + uint64_t page; + void *dma_buf; + int ret; + + /* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer, + * so allocate properly aligned memory for it. This is + * needed because cross page accesses may lead to unaligned + * buffer address for DMA. + */ + dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL); + if (!dma_buf) + return -ENOMEM; + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + ret = macronix_30lfxg18ac_otp_enable(nand); + if (ret) + goto out_otp; + + page = offs_in_flash; + /* 'page' will be result of division. */ + offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE); + bytes_handled = 0; + + while (bytes_handled < len && + page < MACRONIX_30LFXG18AC_OTP_PAGES) { + size_t bytes_to_handle; + + bytes_to_handle = min_t(size_t, len - bytes_handled, + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE - + offs_in_page); + + if (write) { + memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle); + ret = nand_prog_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + } else { + ret = nand_read_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + if (!ret) + memcpy(&buf[bytes_handled], dma_buf, + bytes_to_handle); + } + if (ret) + goto out_otp; + + bytes_handled += bytes_to_handle; + offs_in_page = 0; + page++; + } + + *retlen = bytes_handled; + +out_otp: + if (ret) + dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + WARN(ret, "failed to leave OTP mode after %s\n", + write ? "write" : "read"); + nand_deselect_target(nand); + kfree(dma_buf); + + return ret; +} + +static int macronix_30lfxg18ac_write_otp(struct mtd_info *mtd, loff_t to, + size_t len, size_t *rlen, + const u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, to, len, rlen, (u_char *)buf, + true); +} + +static int macronix_30lfxg18ac_read_otp(struct mtd_info *mtd, loff_t from, + size_t len, size_t *rlen, + u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, from, len, rlen, buf, false); +} + +static int macronix_30lfxg18ac_lock_otp(struct mtd_info *mtd, loff_t from, + size_t len) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + struct nand_chip *nand; + int ret; + + if (from != MACRONIX_30LFXG18AC_OTP_START_BYTE || + len != MACRONIX_30LFXG18AC_OTP_SIZE_BYTES) + return -EINVAL; + + dev_dbg(&mtd->dev, "locking OTP\n"); + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN | + MACRONIX_30LFXG18AC_OTP_LOCKED; + ret = nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); + if (ret) { + dev_err(&mtd->dev, + "failed to lock OTP (set features): %i\n", ret); + nand_deselect_target(nand); + return ret; + } + + /* Do dummy page prog with zero address. */ + feature_buf[0] = 0; + ret = nand_prog_page_op(nand, 0, 0, feature_buf, 1); + if (ret) + dev_err(&mtd->dev, + "failed to lock OTP (page prog): %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + WARN(ret, "failed to leave OTP mode after lock\n"); + + nand_deselect_target(nand); + + return ret; +} + +static void macronix_nand_setup_otp(struct nand_chip *chip) +{ + static const char * const supported_otp_models[] = { + "MX30LF1G18AC", + "MX30LF2G18AC", + "MX30LF4G18AC", + }; + struct mtd_info *mtd; + + if (!chip->parameters.supports_set_get_features) + return; + + if (match_string(supported_otp_models, + ARRAY_SIZE(supported_otp_models), + chip->parameters.model) < 0) + return; + + bitmap_set(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + bitmap_set(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + + mtd = nand_to_mtd(chip); + mtd->_get_fact_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_fact_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_get_user_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_user_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_write_user_prot_reg = macronix_30lfxg18ac_write_otp; + mtd->_lock_user_prot_reg = macronix_30lfxg18ac_lock_otp; +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) @@ -325,6 +537,7 @@ static int macronix_nand_init(struct nand_chip *chip) macronix_nand_onfi_init(chip); macronix_nand_block_protection_support(chip); macronix_nand_deep_power_down_support(chip); + macronix_nand_setup_otp(chip); return 0; } -- 2.35.0

3 years, 1 month

[PATCH] drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl

by Min Li

Userspace can race to free the gobj(robj converted from), robj should not be accessed again after drm_gem_object_put, otherwith it will result in use-after-free. Signed-off-by: Min Li <lm0963hack(a)gmail.com> --- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index bdc5af23f005..450c7cbdd28a 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -478,7 +478,7 @@ int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data, drm_gem_object_put(gobj); up_read(&rdev->exclusive_lock); - r = radeon_gem_handle_lockup(robj->rdev, r); + r = radeon_gem_handle_lockup(rdev, r); return r; } -- 2.34.1

3 years, 1 month

[PATCH 0/7] Add a DRM driver to support AI Processing Unit (APU)

by Alexandre Bailon

This adds a DRM driver that implements communication between the CPU and an APU. The driver target embedded device that usually run inference using some prebuilt models. The goal is to provide common infrastructure that could be re-used to support many accelerators. Both kernel, userspace and firmware tries to use standard and existing to leverage the development and maintenance effort. The series implements two platform drivers, one for simulation and another one for the mt8183 (compatible with mt8365). For the people interested by the firmware or userspace library, the sources are available here: https://gitlab.baylibre.com/baylibre/libapu/libapu The support of APU has to be upstreamed to libdrm. Until this is done, you could find the source here: https://gitlab.baylibre.com/baylibre/libapu/libdrm/-/tree/abailon/main The driver for mt8183 depends on this series (which is currently blocked): https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=620429 Alexandre Bailon (5): drm: Add support of AI Processor Unit (APU) drm/apu: Add memory allocator drm/apu: Add support of requests drm/apu: Add support of IOMMU dt-bindings: Add bidings for mtk,apu-drm Julien Stephan (2): drm/apu: allow platform driver to implement their own mmap function drm/apu: Add support for a simulated APU .../devicetree/bindings/gpu/mtk,apu-drm.yaml | 38 ++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/apu/Kconfig | 22 + drivers/gpu/drm/apu/Makefile | 10 + drivers/gpu/drm/apu/apu_drv.c | 282 +++++++++ drivers/gpu/drm/apu/apu_gem.c | 230 +++++++ drivers/gpu/drm/apu/apu_internal.h | 205 ++++++ drivers/gpu/drm/apu/apu_sched.c | 592 ++++++++++++++++++ drivers/gpu/drm/apu/simu_apu.c | 313 +++++++++ include/uapi/drm/apu_drm.h | 81 +++ 11 files changed, 1776 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/mtk,apu-drm.yaml create mode 100644 drivers/gpu/drm/apu/Kconfig create mode 100644 drivers/gpu/drm/apu/Makefile create mode 100644 drivers/gpu/drm/apu/apu_drv.c create mode 100644 drivers/gpu/drm/apu/apu_gem.c create mode 100644 drivers/gpu/drm/apu/apu_internal.h create mode 100644 drivers/gpu/drm/apu/apu_sched.c create mode 100644 drivers/gpu/drm/apu/simu_apu.c create mode 100644 include/uapi/drm/apu_drm.h -- 2.39.2

3 years, 1 month

[PATCH] drm: Remove unnecessary (void*) conversions

by Su Hui

Pointer variables of (void*) type do not require type cast. Signed-off-by: Su Hui <suhui(a)nfschina.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 4 ++-- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 2 +- drivers/gpu/drm/omapdrm/omap_debugfs.c | 6 +++--- drivers/gpu/drm/pl111/pl111_debugfs.c | 2 +- drivers/gpu/drm/qxl/qxl_debugfs.c | 4 ++-- drivers/gpu/drm/tiny/arcpgu.c | 2 +- drivers/gpu/drm/ttm/ttm_resource.c | 3 +-- drivers/gpu/drm/virtio/virtgpu_debugfs.c | 6 +++--- drivers/gpu/drm/vmwgfx/ttm_object.c | 5 ++--- drivers/gpu/drm/vmwgfx/vmwgfx_gem.c | 2 +- 12 files changed, 19 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index 827fcb4fb3b3..8a2c39927167 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -3312,7 +3312,7 @@ static ssize_t dtn_log_write( static int mst_topo_show(struct seq_file *m, void *unused) { - struct amdgpu_device *adev = (struct amdgpu_device *)m->private; + struct amdgpu_device *adev = m->private; struct drm_device *dev = adev_to_drm(adev); struct drm_connector *connector; struct drm_connector_list_iter conn_iter; diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index 58c2246918fd..e6c870bd307b 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -3671,7 +3671,7 @@ static void amdgpu_parse_cg_state(struct seq_file *m, u64 flags) static int amdgpu_debugfs_pm_info_show(struct seq_file *m, void *unused) { - struct amdgpu_device *adev = (struct amdgpu_device *)m->private; + struct amdgpu_device *adev = m->private; struct drm_device *dev = adev_to_drm(adev); u64 flags = 0; int r; diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index 31a7f59ccb49..dd57f7164e9a 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -198,7 +198,7 @@ static int etnaviv_ring_show(struct etnaviv_gpu *gpu, struct seq_file *m) static int show_unlocked(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; int (*show)(struct drm_device *dev, struct seq_file *m) = node->info_ent->data; @@ -208,7 +208,7 @@ static int show_unlocked(struct seq_file *m, void *arg) static int show_each_gpu(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct etnaviv_drm_private *priv = dev->dev_private; struct etnaviv_gpu *gpu; diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c index 2a36d1ca8fda..96b59d5d68ed 100644 --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c @@ -37,7 +37,7 @@ static int nouveau_debugfs_vbios_image(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct nouveau_drm *drm = nouveau_drm(node->minor->dev); int i; diff --git a/drivers/gpu/drm/omapdrm/omap_debugfs.c b/drivers/gpu/drm/omapdrm/omap_debugfs.c index a3d470468e5b..a94ce502e152 100644 --- a/drivers/gpu/drm/omapdrm/omap_debugfs.c +++ b/drivers/gpu/drm/omapdrm/omap_debugfs.c @@ -19,7 +19,7 @@ static int gem_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct omap_drm_private *priv = dev->dev_private; @@ -33,7 +33,7 @@ static int gem_show(struct seq_file *m, void *arg) static int mm_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct drm_printer p = drm_seq_file_printer(m); @@ -45,7 +45,7 @@ static int mm_show(struct seq_file *m, void *arg) #ifdef CONFIG_DRM_FBDEV_EMULATION static int fb_show(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct drm_fb_helper *helper = dev->fb_helper; struct drm_framebuffer *fb; diff --git a/drivers/gpu/drm/pl111/pl111_debugfs.c b/drivers/gpu/drm/pl111/pl111_debugfs.c index 6744fa16f464..4df03ec5d368 100644 --- a/drivers/gpu/drm/pl111/pl111_debugfs.c +++ b/drivers/gpu/drm/pl111/pl111_debugfs.c @@ -32,7 +32,7 @@ static const struct { static int pl111_debugfs_regs(struct seq_file *m, void *unused) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct drm_device *dev = node->minor->dev; struct pl111_drm_dev_private *priv = dev->dev_private; int i; diff --git a/drivers/gpu/drm/qxl/qxl_debugfs.c b/drivers/gpu/drm/qxl/qxl_debugfs.c index 2d9ed3b94574..5b4fe3049529 100644 --- a/drivers/gpu/drm/qxl/qxl_debugfs.c +++ b/drivers/gpu/drm/qxl/qxl_debugfs.c @@ -38,7 +38,7 @@ static int qxl_debugfs_irq_received(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct qxl_device *qdev = to_qxl(node->minor->dev); seq_printf(m, "%d\n", atomic_read(&qdev->irq_received)); @@ -52,7 +52,7 @@ qxl_debugfs_irq_received(struct seq_file *m, void *data) static int qxl_debugfs_buffers_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct qxl_device *qdev = to_qxl(node->minor->dev); struct qxl_bo *bo; diff --git a/drivers/gpu/drm/tiny/arcpgu.c b/drivers/gpu/drm/tiny/arcpgu.c index e5b10e41554a..09f728355aba 100644 --- a/drivers/gpu/drm/tiny/arcpgu.c +++ b/drivers/gpu/drm/tiny/arcpgu.c @@ -338,7 +338,7 @@ static int arcpgu_unload(struct drm_device *drm) #ifdef CONFIG_DEBUG_FS static int arcpgu_show_pxlclock(struct seq_file *m, void *arg) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct drm_device *drm = node->minor->dev; struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(drm); unsigned long clkrate = clk_get_rate(arcpgu->clk); diff --git a/drivers/gpu/drm/ttm/ttm_resource.c b/drivers/gpu/drm/ttm/ttm_resource.c index 7333f7a87a2f..540faabcf8a4 100644 --- a/drivers/gpu/drm/ttm/ttm_resource.c +++ b/drivers/gpu/drm/ttm/ttm_resource.c @@ -727,9 +727,8 @@ ttm_kmap_iter_linear_io_fini(struct ttm_kmap_iter_linear_io *iter_io, static int ttm_resource_manager_show(struct seq_file *m, void *unused) { - struct ttm_resource_manager *man = - (struct ttm_resource_manager *)m->private; struct drm_printer p = drm_seq_file_printer(m); + struct ttm_resource_manager *man = m->private; ttm_resource_manager_debug(man, &p); return 0; } diff --git a/drivers/gpu/drm/virtio/virtgpu_debugfs.c b/drivers/gpu/drm/virtio/virtgpu_debugfs.c index 853dd9aa397e..577691af9707 100644 --- a/drivers/gpu/drm/virtio/virtgpu_debugfs.c +++ b/drivers/gpu/drm/virtio/virtgpu_debugfs.c @@ -43,7 +43,7 @@ static void virtio_gpu_add_int(struct seq_file *m, const char *name, int value) static int virtio_gpu_features(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; virtio_gpu_add_bool(m, "virgl", vgdev->has_virgl_3d); @@ -68,7 +68,7 @@ static int virtio_gpu_features(struct seq_file *m, void *data) static int virtio_gpu_debugfs_irq_info(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; seq_printf(m, "fence %llu %lld\n", @@ -80,7 +80,7 @@ virtio_gpu_debugfs_irq_info(struct seq_file *m, void *data) static int virtio_gpu_debugfs_host_visible_mm(struct seq_file *m, void *data) { - struct drm_info_node *node = (struct drm_info_node *)m->private; + struct drm_info_node *node = m->private; struct virtio_gpu_device *vgdev = node->minor->dev->dev_private; struct drm_printer p; diff --git a/drivers/gpu/drm/vmwgfx/ttm_object.c b/drivers/gpu/drm/vmwgfx/ttm_object.c index ddf8373c1d77..e9e3cc8f5b49 100644 --- a/drivers/gpu/drm/vmwgfx/ttm_object.c +++ b/drivers/gpu/drm/vmwgfx/ttm_object.c @@ -513,8 +513,7 @@ static void ttm_prime_refcount_release(struct ttm_base_object **p_base) */ static void ttm_prime_dmabuf_release(struct dma_buf *dma_buf) { - struct ttm_prime_object *prime = - (struct ttm_prime_object *) dma_buf->priv; + struct ttm_prime_object *prime = dma_buf->priv; struct ttm_base_object *base = &prime->base; struct ttm_object_device *tdev = base->tfile->tdev; @@ -554,7 +553,7 @@ int ttm_prime_fd_to_handle(struct ttm_object_file *tfile, if (dma_buf->ops != &tdev->ops) return -ENOSYS; - prime = (struct ttm_prime_object *) dma_buf->priv; + prime = dma_buf->priv; base = &prime->base; *handle = base->handle; ret = ttm_ref_object_add(tfile, base, NULL, false); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c index c0da89e16e6f..3267a4e61382 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c @@ -220,7 +220,7 @@ static void vmw_bo_print_info(int id, struct vmw_bo *bo, struct seq_file *m) static int vmw_debugfs_gem_info_show(struct seq_file *m, void *unused) { - struct vmw_private *vdev = (struct vmw_private *)m->private; + struct vmw_private *vdev = m->private; struct drm_device *dev = &vdev->drm; struct drm_file *file; int r; -- 2.30.2

3 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig