Am 27.06.24 um 05:17 schrieb Jason-JH Lin (林睿祥):
On Wed, 2024-06-26 at 12:49 +0200, Christian König wrote:
External email : Please do not click links or open attachments until you have verified the sender or the content. Am 26.06.24 um 10:05 schrieb Jason-JH Lin (林睿祥):
In the step 3), we need to verify the dma-buf is allocated from "restricted_mtk_cma", but there is no way to pass the
secure flag
or private data from userspace to the import interface in DRM
driver.
Why do you need to verify that?
I need to know the imported buffer is allocated from restricted cma and mark it as a secure buffer in mediatek-drm driver. Then, I will add some configuration to the hardware if the buffer is secure buffer, so that it can get the permission to access the secure buffer.
Yeah so far that makes sense. This is basically what other drivers do with secure buffers as well.
But why do you want the kernel to transport that information? Usually drivers get the information from userspace what to do with a buffer.
In other words the format, stride, tilling and also if it's a secure buffer or not comes from userspace.
Thanks for your clear explanation. I think this is what I want, but I can't find any DRM interface to pass the secure flag from userspace.
Well stuff like that is usually device driver specific.
So you should probably use something device specific which tells the driver that this buffer is encrypted.
What the hardware usually handles internally is things like encryption keys, but you eventually get the information where to look for the key from userspace as well.
Handling inside the kernel would only be necessary if userspace could for example crash the system with invalid parameters. But for encryption that is usually not the case.
Yes, that's true.
So I can only verify it like this now: struct drm_gem_object *mtk_gem_prime_import_sg_table(struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sg) { struct mtk_gem_obj *mtk_gem;
/* check if the entries in the sg_table are contiguous */ if (drm_prime_get_contiguous_size(sg) <attach->dmabuf->size) {
DRM_ERROR("sg_table is not contiguous"); return ERR_PTR(-EINVAL); } mtk_gem = mtk_gem_init(dev, attach->dmabuf->size); if (IS_ERR(mtk_gem)) return ERR_CAST(mtk_gem);
- mtk_gem->secure = (!strncmp(attach->dmabuf->exp_name,
"restricted", 10)); mtk_gem->dma_addr = sg_dma_address(sg->sgl); mtk_gem->size = attach->dmabuf->size; mtk_gem->sg = sg;
return &mtk_gem->base;}
Complete NAK from my side to that approach. Importing of a DMA-
buf
should be independent of the exporter.
What you could do is to provide the secure buffer from a device
and
not a device heap.
You mean I should allocate buffer in mediate-drm driver not userspace?
Well that depends. The question is if you have multiple drivers which needs to work with this secure buffer?
If yes then you should have a general allocation heap for it. If no then the buffers could as well be allocated from the driver interface directly.
Yes, this buffer needs work with GPU and DRM drivers, so this general "restricted_mtk_cma" will allocated in userspace, then being passed to GPU and DRM.
Well do you really need a separate heap for that? In other words is only a certain part of the system memory capable of being encrypted?
Or would the "normal" CMA heap do as well and you only need to setup your hardware properly for encryption?
Additional to that in most other drivers buffer sharing and encryption are two separate things. In other words other drivers do something like this:
1. Allocate the buffer. 2. Import the buffer using DRM_IOCTL_PRIME_FD_TO_HANDLE. 3. Set additional buffer properties, e.g. format, stride, tilling, if it's secure, which encryption key to use, where to map etc...
So as far as I can see the problem you are facing is that you try to mangle everything into DRM_IOCTL_PRIME_FD_TO_HANDLE. Why not make that a separate IOCTL?
I mean we intentionally don't provide things like format, stride, tilling etc.. to DRM_IOCTL_PRIME_FD_TO_HANDLE. Encryption is just another of those parameters.
Regards, Christian.
I just have modified this to userspace by the comment here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20240403102701.369...
I think I have the same problem as the ECC_FLAG mention in:
https://lore.kernel.org/linux-media/20240515-dma-buf-ecc-heap-v1-0-54cbbd049...
I think it would be better to have the user configurable
private
information in dma-buf, so all the drivers who have the same requirement can get their private information from dma-buf
directly
and no need to change or add the interface.
What's your opinion in this point?
Well of hand I don't see the need for that.
What happens if you get a non-secure buffer imported in your
secure
device?
We use the same mediatek-drm driver for secure and non-secure buffer. If non-secure buffer imported to mediatek-drm driver, it's go to the normal flow with normal hardware settings.
We use different configurations to make hardware have different permission to access the buffer it should access.
So if we can't get the information of "the buffer is allocated from restricted_mtk_cma" when importing the buffer into the driver, we won't be able to configure the hardware correctly.
Why can't you get this information from userspace?
As I mentioned here:
https://patchwork.kernel.org/project/linux-mediatek/cover/20240525232928.552...
I tried some DRM interfaces using buffer FD and arg->flag as parameters, but it didn't work. So I ask for your help here.
But I think I should find DRM maintainer to add the secure flag to DRM interface now.
Regards, Jason-JH.Lin
************* MEDIATEK Confidentiality Notice ******************** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you!
linaro-mm-sig@lists.linaro.org
-
Christian König