This is a no-op change for style and consistency and has no effect on the binary output by the compiler. In sysreg.h fields are defined as the register name followed by the field name and then _MASK. This allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark james.clark@arm.com --- .../coresight/coresight-etm4x-core.c | 40 +++++-------------- drivers/hwtracing/coresight/coresight-etm4x.h | 10 +++++ 2 files changed, 20 insertions(+), 30 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index fd44231e9d8a..1b377f6b31bf 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1124,53 +1124,33 @@ static void etm4_init_arch_data(void *info)
etmidr3 = etm4x_relaxed_read32(csa, TRCIDR3); /* CCITMIN, bits[11:0] minimum threshold value that can be programmed */ - drvdata->ccitmin = BMVAL(etmidr3, 0, 11); + drvdata->ccitmin = FIELD_GET(TRCIDR3_CCITMIN_MASK, etmidr3); /* EXLEVEL_S, bits[19:16] Secure state instruction tracing */ - drvdata->s_ex_level = BMVAL(etmidr3, 16, 19); + drvdata->s_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_S_MASK, etmidr3); drvdata->config.s_ex_level = drvdata->s_ex_level; /* EXLEVEL_NS, bits[23:20] Non-secure state instruction tracing */ - drvdata->ns_ex_level = BMVAL(etmidr3, 20, 23); - + drvdata->ns_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_NS_MASK, etmidr3); /* * TRCERR, bit[24] whether a trace unit can trace a * system error exception. */ - if (BMVAL(etmidr3, 24, 24)) - drvdata->trc_error = true; - else - drvdata->trc_error = false; - + drvdata->trc_error = !!(etmidr3 & TRCIDR3_TRCERR); /* SYNCPR, bit[25] implementation has a fixed synchronization period? */ - if (BMVAL(etmidr3, 25, 25)) - drvdata->syncpr = true; - else - drvdata->syncpr = false; - + drvdata->syncpr = !!(etmidr3 & TRCIDR3_SYNCPR); /* STALLCTL, bit[26] is stall control implemented? */ - if (BMVAL(etmidr3, 26, 26)) - drvdata->stallctl = true; - else - drvdata->stallctl = false; - + drvdata->stallctl = !!(etmidr3 & TRCIDR3_STALLCTL); /* SYSSTALL, bit[27] implementation can support stall control? */ - if (BMVAL(etmidr3, 27, 27)) - drvdata->sysstall = true; - else - drvdata->sysstall = false; - + drvdata->sysstall = !!(etmidr3 & TRCIDR3_SYSSTALL); /* * NUMPROC - the number of PEs available for tracing, 5bits * = TRCIDR3.bits[13:12]bits[30:28] * bits[4:3] = TRCIDR3.bits[13:12] (since etm-v4.2, otherwise RES0) * bits[3:0] = TRCIDR3.bits[30:28] */ - drvdata->nr_pe = (BMVAL(etmidr3, 12, 13) << 3) | BMVAL(etmidr3, 28, 30); - + drvdata->nr_pe = (FIELD_GET(TRCIDR3_NUMPROC_HI_MASK, etmidr3) << 3) | + FIELD_GET(TRCIDR3_NUMPROC_LO_MASK, etmidr3); /* NOOVERFLOW, bit[31] is trace overflow prevention supported */ - if (BMVAL(etmidr3, 31, 31)) - drvdata->nooverflow = true; - else - drvdata->nooverflow = false; + drvdata->nooverflow = !!(etmidr3 & TRCIDR3_NOOVERFLOW);
/* number of resources trace unit supports */ etmidr4 = etm4x_relaxed_read32(csa, TRCIDR4); diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index cfdf966016b7..1b95c63938f0 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -147,6 +147,16 @@ #define TRCIDR2_VMIDSIZE_MASK GENMASK(14, 10) #define TRCIDR2_CCSIZE_MASK GENMASK(28, 25)
+#define TRCIDR3_CCITMIN_MASK GENMASK(11, 0) +#define TRCIDR3_EXLEVEL_S_MASK GENMASK(19, 16) +#define TRCIDR3_EXLEVEL_NS_MASK GENMASK(23, 20) +#define TRCIDR3_TRCERR BIT(24) +#define TRCIDR3_SYNCPR BIT(25) +#define TRCIDR3_STALLCTL BIT(26) +#define TRCIDR3_SYSSTALL BIT(27) +#define TRCIDR3_NUMPROC_LO_MASK GENMASK(30, 28) +#define TRCIDR3_NUMPROC_HI_MASK GENMASK(13, 12) +#define TRCIDR3_NOOVERFLOW BIT(31) /* * System instructions to access ETM registers. * See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions