This is a no-op change for style and consistency and has no effect on the binary output by the compiler. In sysreg.h fields are defined as the register name followed by the field name and then _MASK. This allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark james.clark@arm.com --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 6 +++--- drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++++ 2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 9120390a7613..fd44231e9d8a 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1116,11 +1116,11 @@ static void etm4_init_arch_data(void *info) /* maximum size of resources */ etmidr2 = etm4x_relaxed_read32(csa, TRCIDR2); /* CIDSIZE, bits[9:5] Indicates the Context ID size */ - drvdata->ctxid_size = BMVAL(etmidr2, 5, 9); + drvdata->ctxid_size = FIELD_GET(TRCIDR2_CIDSIZE_MASK, etmidr2); /* VMIDSIZE, bits[14:10] Indicates the VMID size */ - drvdata->vmid_size = BMVAL(etmidr2, 10, 14); + drvdata->vmid_size = FIELD_GET(TRCIDR2_VMIDSIZE_MASK, etmidr2); /* CCSIZE, bits[28:25] size of the cycle counter in bits minus 12 */ - drvdata->ccsize = BMVAL(etmidr2, 25, 28); + drvdata->ccsize = FIELD_GET(TRCIDR2_CCSIZE_MASK, etmidr2);
etmidr3 = etm4x_relaxed_read32(csa, TRCIDR3); /* CCITMIN, bits[11:0] minimum threshold value that can be programmed */ diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index 300741fbc0de..cfdf966016b7 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -143,6 +143,10 @@ #define TRCIDR0_QSUPP_MASK GENMASK(16, 15) #define TRCIDR0_TSSIZE_MASK GENMASK(28, 24)
+#define TRCIDR2_CIDSIZE_MASK GENMASK(9, 5) +#define TRCIDR2_VMIDSIZE_MASK GENMASK(14, 10) +#define TRCIDR2_CCSIZE_MASK GENMASK(28, 25) + /* * System instructions to access ETM registers. * See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions