In order to document the newly added branch_broadcast option, create a table that links all of the config option formats to any existing docs. That way when the branch broadcast docs are expanded they are accessible from both places.
Signed-off-by: James Clark james.clark@arm.com Reviewed-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-reference.rst | 4 ++ Documentation/trace/coresight/coresight.rst | 39 +++++++++++++++++++ 2 files changed, 43 insertions(+)
diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst index d25dfe86af9b..0439b4006227 100644 --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst @@ -650,6 +650,7 @@ Bit assignments shown below:- parameter is set this value is applied to the currently indexed address range.
+.. _coresight-branch-broadcast:
**bit (4):** ETM_MODE_BB @@ -657,6 +658,7 @@ Bit assignments shown below:- **description:** Set to enable branch broadcast if supported in hardware [IDR0].
+.. _coresight-cycle-accurate:
**bit (5):** ETMv4_MODE_CYCACC @@ -678,6 +680,7 @@ Bit assignments shown below:- **description:** Set to enable virtual machine ID tracing if supported [IDR2].
+.. _coresight-timestamp:
**bit (11):** ETMv4_MODE_TIMESTAMP @@ -685,6 +688,7 @@ Bit assignments shown below:- **description:** Set to enable timestamp generation if supported [IDR0].
+.. _coresight-return-stack:
**bit (12):** ETM_MODE_RETURNSTACK diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index db66ff45ff4c..803a224dbb0e 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -585,6 +585,45 @@ sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tuto Bubble sorting array of 30000 elements 5806 ms
+Config option formats +~~~~~~~~~~~~~~~~~~~~~ + +The following strings can be provided between // on the perf command line to enable various options. +They are also listed in the folder /sys/bus/event_source/devices/cs_etm/format/ + +.. list-table:: + :header-rows: 1 + + * - Option + - Description + * - branch_broadcast + - Session local version of the system wide setting: + :ref:`ETM_MODE_BB <coresight-branch-broadcast>` + * - contextid + - See `Tracing PID`_ + * - contextid1 + - See `Tracing PID`_ + * - contextid2 + - See `Tracing PID`_ + * - configid + - Selection for a custom configuration. This is an implementation detail and not used directly, + see :ref:`trace/coresight/coresight-config:Using Configurations in perf` + * - preset + - Override for parameters in a custom configuration, see + :ref:`trace/coresight/coresight-config:Using Configurations in perf` + * - sinkid + - Hashed version of the string to select a sink, automatically set when using the @ notation. + This is an internal implementation detail and is not used directly, see `Using perf + framework`_. + * - cycacc + - Session local version of the system wide setting: :ref:`ETMv4_MODE_CYCACC + <coresight-cycle-accurate>` + * - retstack + - Session local version of the system wide setting: :ref:`ETM_MODE_RETURNSTACK + <coresight-return-stack>` + * - timestamp + - Session local version of the system wide setting: :ref:`ETMv4_MODE_TIMESTAMP + <coresight-timestamp>`
How to use the STM module -------------------------