On 22 May 2017 at 00:52, Abhijit Dongre Abhijit.Dongre@open-silicon.com wrote:

Hi Mike,

Thanks for this valuable information,

Our RTL simulations are working with CAD tool on linux based server.

We see we have /usr/bin/perf tool installed there

Can we provide some output log file from RTL simulations say, JTAG/APB transactions from ETF/ETB, to perf to analyze it?

That will not work.

Or is following correct Using perf can be used to provide trace of server processor and not our SOC design? Meaning linux should run on CPU for which trace is being captured. Please confirm?

Coresight traces don't carry information about how tracers have been configured, something that is mandatory for proper interpretation of the information carried in the traces. Integrating Coresight with perf allowed to trigger trace collection precisely when the process of interest is scheduled on a CPU and to communicate configuration specifics to the openCSD library.

This was provided in part as an example on how to used the openCSD library. Anyone can use the library and come up with their own way to communicate trace configuration to the library.

I hope this helps, Mathieu

Regards, Abhijit Dongre Sr. Engineer

T: (91) 20 41462660 M: (91) 9561065364 E: abhijit.dongre@open-silicon.com

Open-Silicon Your Idea Delivered TM w f t in

The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this message please do not read, copy, use or disclose this communication and notify the sender immediately. It should be noted that any review, retransmission, dissemination or other use of, or taking action or reliance upon, this information by persons or entities other than the intended recipient is prohibited.

-----Original Message----- From: Mike Leach [mailto:mike.leach@linaro.org] Sent: Tuesday, May 16, 2017 2:51 PM To: Abhijit Dongre Cc: coresight@lists.linaro.org Subject: Re: Coresight ETM/STM trace

Hi,

OpenCSD can be use to decode trace from any source - subject to the current list of implemented features (i.e. no data trace etc. - see the README).

However OpenCSD provides only a decode library - it does not have facilities to program up CoreSight devices for trace (though the CoreSight Access Library [ https://github.com/ARM-software/CSAL ] may help with this), nor will it provide disassembly of trace or any other analysis - external programs must provide this.

For example in Linux, we have adapted 'perf' to use CoreSight, using the OpenCSD library to analyse the trace. In a bare metal environment you describe then you will have to provide your own CoreSight programming and trace analysis software.

Regards

Mike

On 16 May 2017 at 08:10, Abhijit Dongre Abhijit.Dongre@open-silicon.com wrote:

...

Hi,

We are running Coresight testcases in RTL simulation, and intend to decode the trace stored in ETF and Memory(through ETR).

Came across OpenCSD library,

Can this library be used in decoding of trace in RTL simulation? Note that in RTL simulations we don’t use Linux and heavy software, we use bare minimum startup code for booting.

If decoding is possible, please let us know procedure and pricing if any.

Regards,

Abhijit

---

CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight

-- Mike Leach Principal Engineer, ARM Ltd. Blackburn Design Centre. UK _______________________________________________ CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight