The current method for allocating trace source ID values to sources is to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10). The STM is allocated ID 0x1.
This fixed algorithm is used in both the CoreSight driver code, and by perf when writing the trace metadata in the AUXTRACE_INFO record.
The method needs replacing as currently:- 1. It is inefficient in using available IDs. 2. Does not scale to larger systems with many cores and the algorithm has no limits so will generate invalid trace IDs for cpu number > 44.
Additionally requirements to allocate additional system IDs on some systems have been seen.
This patch set introduces an API that allows the allocation of trace IDs in a dynamic manner.
Architecturally reserved IDs are never allocated, and the system is limited to allocating only valid IDs.
Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use the new API.
For the ETMx.x devices IDs are allocated on certain events a) When using sysfs, an ID will be allocated on hardware enable, or a read of sysfs TRCTRACEID register and freed when the sysfs reset is written.
b) When using perf, ID is allocated on during setup AUX event, and freed on event free. IDs are communicated using the AUX_OUTPUT_HW_ID packet. The ID allocator is notified when perf sessions start and stop so CPU based IDs are kept constant throughout any perf session.
Note: This patchset breaks some backward compatibility for perf record and perf report.
The version of the AUXTRACE_INFO has been updated to reflect the fact that the trace source IDs are generated differently. This will mean older versions of perf report cannot decode the newer file.
Applies to coresight/next [4d45bc82df66] Tested on DB410c
Changes since v2: 1) Improved backward compatibility: (requested by James)
Using the new version of perf on an old kernel will generate a usable file legacy metadata values are set by the new perf and will be used if mew ID packets are not present in the file.
Using an older version of perf / simpleperf on an updated kernel may still work. The trace ID allocator has been updated to use the legacy ID values where possible, so generated file and used trace IDs will match up to the point where the legacy algorithm is broken anyway.
2) Various changes to the ID allocator and ID packet format. (suggested by Suzuki)
3) per CPU ID info in allocator now stored as atomic type to allow a passive read without taking the allocator spinlock. perf flow now allocates and releases ID values in setup_aux / free_event. Device enable and event enable use the passive read to set the allocated values. This simplifies the locking mechanisms on the perf run and fixes issues that arose with locking dependencies.
Changes since v1: (after feedback & discussion with Mathieu & Suzuki).
1) API has changed. The global trace ID map is managed internally, so it is no longer passed in to the API functions.
2) perf record does not use sysfs to find the trace IDs. These are now output as AUX_OUTPUT_HW_ID events. The drivers, perf record, and perf report have been updated accordingly to generate and handle these events.
Mike Leach (13): coresight: trace-id: Add API to dynamically assign Trace ID values coresight: Remove obsolete Trace ID unniqueness checks coresight: stm: Update STM driver to use Trace ID API coresight: etm4x: Update ETM4 driver to use Trace ID API coresight: etm3x: Update ETM3 driver to use Trace ID API coresight: etmX.X: stm: Remove trace_id() callback coresight: perf: traceid: Add perf notifiers for Trace ID perf: cs-etm: Move mapping of Trace ID and cpu into helper function perf: cs-etm: Update record event to use new Trace ID protocol kernel: events: Export perf_report_aux_output_id() perf: cs-etm: Handle PERF_RECORD_AUX_OUTPUT_HW_ID packet coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID coresight: trace-id: Add debug & test macros to Trace ID allocation
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 49 +-- .../hwtracing/coresight/coresight-etm-perf.c | 23 ++ drivers/hwtracing/coresight/coresight-etm.h | 3 +- .../coresight/coresight-etm3x-core.c | 92 +++-- .../coresight/coresight-etm3x-sysfs.c | 27 +- .../coresight/coresight-etm4x-core.c | 79 ++++- .../coresight/coresight-etm4x-sysfs.c | 27 +- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + drivers/hwtracing/coresight/coresight-stm.c | 49 +-- .../hwtracing/coresight/coresight-trace-id.c | 266 ++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 +++++ include/linux/coresight-pmu.h | 35 +- include/linux/coresight.h | 3 - kernel/events/core.c | 1 + tools/include/linux/coresight-pmu.h | 48 ++- tools/perf/arch/arm/util/cs-etm.c | 21 +- .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 + tools/perf/util/cs-etm.c | 331 +++++++++++++++--- tools/perf/util/cs-etm.h | 14 +- 20 files changed, 933 insertions(+), 225 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
The existing mechanism to assign Trace ID values to sources is limited and does not scale for larger multicore / multi trace source systems.
The API introduces functions that reserve IDs based on availabilty represented by a coresight_trace_id_map structure. This records the used and free IDs in a bitmap.
CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id / coresight_trace_id_put_cpu_id pair of functions. The API will record the ID associated with the CPU. This ensures that the same ID will be re-used while perf events are active on the CPU. The put_cpu_id function will pend release of the ID until all perf cs_etm sessions are complete.
Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id / coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 4 + .../hwtracing/coresight/coresight-trace-id.c | 230 ++++++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 ++++++ include/linux/coresight-pmu.h | 23 +- 5 files changed, 324 insertions(+), 13 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index b6c4a48140ec..329a0c704b87 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ coresight-sysfs.o coresight-syscfg.o coresight-config.o \ coresight-cfg-preload.o coresight-cfg-afdo.o \ - coresight-syscfg-configfs.o + coresight-syscfg-configfs.o coresight-trace-id.o obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.o diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 1edfec1e9d18..c7b7c518a0a3 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -22,6 +22,7 @@ #include "coresight-etm-perf.h" #include "coresight-priv.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h"
static DEFINE_MUTEX(coresight_mutex); static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); @@ -1775,6 +1776,9 @@ static int __init coresight_init(void) if (ret) goto exit_bus_unregister;
+ /* initialise the trace ID allocator */ + coresight_trace_id_init(); + /* initialise the coresight syscfg API */ ret = cscfg_init(); if (!ret) diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c new file mode 100644 index 000000000000..ac9092896dec --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Linaro Limited, All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ +#include <linux/coresight-pmu.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include "coresight-trace-id.h" + +/* need to keep data on ids & association with cpus. */ +struct cpu_id_info { + atomic_t id; + bool pend_rel; +}; + +/* default trace ID map. Used for systems that do not require per sink mappings */ +static struct coresight_trace_id_map id_map_default; + +/* maintain a record of the current mapping of cpu IDs */ +static DEFINE_PER_CPU(struct cpu_id_info, cpu_ids); + +/* perf session active counter */ +static atomic_t perf_cs_etm_session_active = ATOMIC_INIT(0); + +/* lock to protect id_map and cpu data */ +static DEFINE_SPINLOCK(id_map_lock); + +/* + * allocate new ID and set in use + * if @preferred_id is a valid id then try to use that value if available. + */ +static int coresight_trace_id_alloc_new_id(struct coresight_trace_id_map *id_map, + int preferred_id) +{ + int id; + + /* for backwards compatibility reasons, cpu Ids may have a preferred value */ + if (IS_VALID_ID(preferred_id) && !test_bit(preferred_id, id_map->used_ids)) + id = preferred_id; + else { + /* skip reserved bit 0, look from bit 1 to CORESIGHT_TRACE_ID_RES_TOP */ + id = find_next_zero_bit(id_map->used_ids, 1, CORESIGHT_TRACE_ID_RES_TOP); + if (id >= CORESIGHT_TRACE_ID_RES_TOP) + return -EINVAL; + } + + /* mark as used */ + set_bit(id, id_map->used_ids); + return id; +} + +static void coresight_trace_id_free(int id, struct coresight_trace_id_map *id_map) +{ + if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id)) + return; + if (WARN(!test_bit(id, id_map->used_ids), + "%s: Freeing unused ID %d\n", __func__, id)) + return; + clear_bit(id, id_map->used_ids); +} + +static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_map *id_map) +{ + if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id)) + return; + set_bit(id, id_map->pend_rel_ids); +} + +/* release all pending IDs for all current maps & clear CPU associations */ +static void coresight_trace_id_release_all_pending(void) +{ + struct coresight_trace_id_map *id_map = &id_map_default; + unsigned long flags; + int cpu, bit; + + spin_lock_irqsave(&id_map_lock, flags); + for_each_set_bit(bit, id_map->pend_rel_ids, CORESIGHT_TRACE_ID_RES_TOP) { + clear_bit(bit, id_map->used_ids); + clear_bit(bit, id_map->pend_rel_ids); + } + for_each_possible_cpu(cpu) { + if (per_cpu(cpu_ids, cpu).pend_rel) { + per_cpu(cpu_ids, cpu).pend_rel = false; + atomic_set(&per_cpu(cpu_ids, cpu).id, 0); + } + } + spin_unlock_irqrestore(&id_map_lock, flags); +} + +static int coresight_trace_id_map_get_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{ + unsigned long flags; + int id; + + spin_lock_irqsave(&id_map_lock, flags); + + /* check for existing allocation for this CPU */ + id = atomic_read(&per_cpu(cpu_ids, cpu).id); + if (id) + goto get_cpu_id_out; + + /* + * Find a new ID. + * + * Use legacy values where possible in the dynamic trace ID allocator to + * allow tools like Android simpleperf to continue working if they are not + * upgraded at the same time as the kernel drivers. + * + * If the generated legacy ID is invalid, or not available then the next + * available dynamic ID will be used. + */ + id = coresight_trace_id_alloc_new_id(id_map, CORESIGHT_LEGACY_CPU_TRACE_ID(cpu)); + if (IS_VALID_ID(id)) { + /* got a valid new ID - save details */ + atomic_set(&per_cpu(cpu_ids, cpu).id, id); + per_cpu(cpu_ids, cpu).pend_rel = false; + clear_bit(id, id_map->pend_rel_ids); + } + +get_cpu_id_out: + spin_unlock_irqrestore(&id_map_lock, flags); + + return id; +} + +static void coresight_trace_id_map_put_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{ + unsigned long flags; + int id; + + /* check for existing allocation for this CPU */ + id = atomic_read(&per_cpu(cpu_ids, cpu).id); + if (!id) + goto put_cpu_id_out; + + spin_lock_irqsave(&id_map_lock, flags); + + if (atomic_read(&perf_cs_etm_session_active)) { + /* set release at pending if perf still active */ + coresight_trace_id_set_pend_rel(id, id_map); + per_cpu(cpu_ids, cpu).pend_rel = true; + } else { + /* otherwise clear id */ + coresight_trace_id_free(id, id_map); + atomic_set(&per_cpu(cpu_ids, cpu).id, 0); + } + + spin_unlock_irqrestore(&id_map_lock, flags); +put_cpu_id_out: +} + +static int coresight_trace_id_map_get_system_id(struct coresight_trace_id_map *id_map) +{ + unsigned long flags; + int id; + + spin_lock_irqsave(&id_map_lock, flags); + id = coresight_trace_id_alloc_new_id(id_map, 0); + spin_unlock_irqrestore(&id_map_lock, flags); + + return id; +} + +static void coresight_trace_id_map_put_system_id(struct coresight_trace_id_map *id_map, int id) +{ + unsigned long flags; + + spin_lock_irqsave(&id_map_lock, flags); + coresight_trace_id_free(id, id_map); + spin_unlock_irqrestore(&id_map_lock, flags); +} + +/* API functions */ +int coresight_trace_id_get_cpu_id(int cpu) +{ + return coresight_trace_id_map_get_cpu_id(cpu, &id_map_default); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_get_cpu_id); + +void coresight_trace_id_put_cpu_id(int cpu) +{ + coresight_trace_id_map_put_cpu_id(cpu, &id_map_default); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_put_cpu_id); + +int coresight_trace_id_read_cpu_id(int cpu) +{ + return atomic_read(&per_cpu(cpu_ids, cpu).id); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_read_cpu_id); + +int coresight_trace_id_get_system_id(void) +{ + return coresight_trace_id_map_get_system_id(&id_map_default); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_get_system_id); + +void coresight_trace_id_put_system_id(int id) +{ + coresight_trace_id_map_put_system_id(&id_map_default, id); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_put_system_id); + +void coresight_trace_id_perf_start(void) +{ + atomic_inc(&perf_cs_etm_session_active); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_perf_start); + +void coresight_trace_id_perf_stop(void) +{ + if (!atomic_dec_return(&perf_cs_etm_session_active)) + coresight_trace_id_release_all_pending(); +} +EXPORT_SYMBOL_GPL(coresight_trace_id_perf_stop); + +void coresight_trace_id_init(void) +{ + int cpu; + + /* initialise the atomic trace ID values */ + for_each_possible_cpu(cpu) { + per_cpu(cpu_ids, cpu).pend_rel = false; + atomic_set(&per_cpu(cpu_ids, cpu).id, 0); + } +} +EXPORT_SYMBOL_GPL(coresight_trace_id_init); diff --git a/drivers/hwtracing/coresight/coresight-trace-id.h b/drivers/hwtracing/coresight/coresight-trace-id.h new file mode 100644 index 000000000000..0172f83a80bb --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-trace-id.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(C) 2022 Linaro Limited. All rights reserved. + * Author: Mike Leach mike.leach@linaro.org + */ + +#ifndef _CORESIGHT_TRACE_ID_H +#define _CORESIGHT_TRACE_ID_H + +/* + * Coresight trace ID allocation API + * + * With multi cpu systems, and more additional trace sources a scalable + * trace ID reservation system is required. + * + * The system will allocate Ids on a demand basis, and allow them to be + * released when done. + * + * In order to ensure that a consistent cpu / ID matching is maintained + * throughout a perf cs_etm event session - a session in progress flag will + * be maintained, and released IDs not cleared until the perf session is + * complete. This allows the same CPU to be re-allocated its prior ID. + * + * + * Trace ID maps will be created and initialised to prevent architecturally + * reserved IDs from being allocated. + * + * API permits multiple maps to be maintained - for large systems where + * different sets of cpus trace into different independent sinks. + */ + +#include <linux/bitops.h> +#include <linux/types.h> + + +/* architecturally we have 128 IDs some of which are reserved */ +#define CORESIGHT_TRACE_IDS_MAX 128 + +/* ID 0 is reserved */ +#define CORESIGHT_TRACE_ID_RES_0 0 + +/* ID 0x70 onwards are reserved */ +#define CORESIGHT_TRACE_ID_RES_TOP 0x70 + +/* check an ID is in the valid range */ +#define IS_VALID_ID(id) \ + ((id > CORESIGHT_TRACE_ID_RES_0) && (id < CORESIGHT_TRACE_ID_RES_TOP)) + +/** + * Trace ID map. + * + * @used_ids: Bitmap to register available (bit = 0) and in use (bit = 1) IDs. + * Initialised so that the reserved IDs are permanently marked as in use. + * @pend_rel_ids: CPU IDs that have been released by the trace source but not yet marked + * as available, to allow re-allocation to the same CPU during a perf session. + */ +struct coresight_trace_id_map { + DECLARE_BITMAP(used_ids, CORESIGHT_TRACE_IDS_MAX); + DECLARE_BITMAP(pend_rel_ids, CORESIGHT_TRACE_IDS_MAX); +}; + +/* Allocate and release IDs for a single default trace ID map */ +int coresight_trace_id_get_cpu_id(int cpu); +int coresight_trace_id_get_system_id(void); +void coresight_trace_id_put_cpu_id(int cpu); +void coresight_trace_id_put_system_id(int id); + +/* read without allocate */ +int coresight_trace_id_read_cpu_id(int cpu); + +/* notifiers for perf session start and stop */ +void coresight_trace_id_perf_start(void); +void coresight_trace_id_perf_stop(void); + +/* initialisation */ +void coresight_trace_id_init(void); + +#endif /* _CORESIGHT_TRACE_ID_H */ diff --git a/include/linux/coresight-pmu.h b/include/linux/coresight-pmu.h index 6c2fd6cc5a98..99bc3cc6bf2d 100644 --- a/include/linux/coresight-pmu.h +++ b/include/linux/coresight-pmu.h @@ -8,7 +8,17 @@ #define _LINUX_CORESIGHT_PMU_H
#define CORESIGHT_ETM_PMU_NAME "cs_etm" -#define CORESIGHT_ETM_PMU_SEED 0x10 + +/* + * The legacy Trace ID system based on fixed calculation from the cpu + * number. This has been replaced by drivers using a dynamic allocation + * system - but need to retain the legacy algorithm for backward comparibility + * in certain situations:- + * a) new perf running on older systems that generate the legacy mapping + * b) older tools e.g. simpleperf in Android, that may not update at the same + * time as the kernel. + */ +#define CORESIGHT_LEGACY_CPU_TRACE_ID(cpu) (0x10 + (cpu * 2))
/* * Below are the definition of bit offsets for perf option, and works as @@ -34,15 +44,4 @@ #define ETM4_CFG_BIT_RETSTK 12 #define ETM4_CFG_BIT_VMID_OPT 15
-static inline int coresight_get_trace_id(int cpu) -{ - /* - * A trace ID of value 0 is invalid, so let's start at some - * random value that fits in 7 bits and go from there. Since - * the common convention is to have data trace IDs be I(N) + 1, - * set instruction trace IDs as a function of the CPU number. - */ - return (CORESIGHT_ETM_PMU_SEED + (cpu * 2)); -} - #endif
On 09/08/2022 23:33, Mike Leach wrote:
The existing mechanism to assign Trace ID values to sources is limited and does not scale for larger multicore / multi trace source systems.
The API introduces functions that reserve IDs based on availabilty represented by a coresight_trace_id_map structure. This records the used and free IDs in a bitmap.
CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id / coresight_trace_id_put_cpu_id pair of functions. The API will record the ID associated with the CPU. This ensures that the same ID will be re-used while perf events are active on the CPU. The put_cpu_id function will pend release of the ID until all perf cs_etm sessions are complete.
Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id / coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach mike.leach@linaro.org
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 4 + .../hwtracing/coresight/coresight-trace-id.c | 230 ++++++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 ++++++ include/linux/coresight-pmu.h | 23 +- 5 files changed, 324 insertions(+), 13 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index b6c4a48140ec..329a0c704b87 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ coresight-sysfs.o coresight-syscfg.o coresight-config.o \ coresight-cfg-preload.o coresight-cfg-afdo.o \
coresight-syscfg-configfs.o
obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.ocoresight-syscfg-configfs.o coresight-trace-id.o
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 1edfec1e9d18..c7b7c518a0a3 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -22,6 +22,7 @@ #include "coresight-etm-perf.h" #include "coresight-priv.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h" static DEFINE_MUTEX(coresight_mutex); static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); @@ -1775,6 +1776,9 @@ static int __init coresight_init(void) if (ret) goto exit_bus_unregister;
- /* initialise the trace ID allocator */
- coresight_trace_id_init();
- /* initialise the coresight syscfg API */ ret = cscfg_init(); if (!ret)
diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c new file mode 100644 index 000000000000..ac9092896dec --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright (c) 2022, Linaro Limited, All rights reserved.
- Author: Mike Leach mike.leach@linaro.org
- */
+#include <linux/coresight-pmu.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h>
+#include "coresight-trace-id.h"
+/* need to keep data on ids & association with cpus. */ +struct cpu_id_info {
- atomic_t id;
- bool pend_rel;
+};
+/* default trace ID map. Used for systems that do not require per sink mappings */ +static struct coresight_trace_id_map id_map_default;
+/* maintain a record of the current mapping of cpu IDs */ +static DEFINE_PER_CPU(struct cpu_id_info, cpu_ids);
+/* perf session active counter */ +static atomic_t perf_cs_etm_session_active = ATOMIC_INIT(0);
+/* lock to protect id_map and cpu data */ +static DEFINE_SPINLOCK(id_map_lock);
+/*
- allocate new ID and set in use
- if @preferred_id is a valid id then try to use that value if available.
- */
+static int coresight_trace_id_alloc_new_id(struct coresight_trace_id_map *id_map,
int preferred_id)
+{
- int id;
- /* for backwards compatibility reasons, cpu Ids may have a preferred value */
- if (IS_VALID_ID(preferred_id) && !test_bit(preferred_id, id_map->used_ids))
id = preferred_id;
- else {
/* skip reserved bit 0, look from bit 1 to CORESIGHT_TRACE_ID_RES_TOP */
id = find_next_zero_bit(id_map->used_ids, 1, CORESIGHT_TRACE_ID_RES_TOP);
if (id >= CORESIGHT_TRACE_ID_RES_TOP)
return -EINVAL;
- }
- /* mark as used */
- set_bit(id, id_map->used_ids);
- return id;
+}
+static void coresight_trace_id_free(int id, struct coresight_trace_id_map *id_map) +{
- if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id))
return;
- if (WARN(!test_bit(id, id_map->used_ids),
"%s: Freeing unused ID %d\n", __func__, id))
return;
- clear_bit(id, id_map->used_ids);
+}
+static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_map *id_map) +{
- if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id))
return;
- set_bit(id, id_map->pend_rel_ids);
+}
+/* release all pending IDs for all current maps & clear CPU associations */ +static void coresight_trace_id_release_all_pending(void) +{
- struct coresight_trace_id_map *id_map = &id_map_default;
- unsigned long flags;
- int cpu, bit;
- spin_lock_irqsave(&id_map_lock, flags);
- for_each_set_bit(bit, id_map->pend_rel_ids, CORESIGHT_TRACE_ID_RES_TOP) {
clear_bit(bit, id_map->used_ids);
clear_bit(bit, id_map->pend_rel_ids);
- }
- for_each_possible_cpu(cpu) {
if (per_cpu(cpu_ids, cpu).pend_rel) {
per_cpu(cpu_ids, cpu).pend_rel = false;
atomic_set(&per_cpu(cpu_ids, cpu).id, 0);
}
- }
Could we use a bitmask for the pending CPUs and use that to track the pending CPUs ? Looping over the "possible" CPUs could be quite time consuming for large system with spin lock held.
DECLARE_BITMAP(cpuid_release_pending, NR_CPUS);
- spin_unlock_irqrestore(&id_map_lock, flags);
+}
+static int coresight_trace_id_map_get_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{
- unsigned long flags;
- int id;
- spin_lock_irqsave(&id_map_lock, flags);
- /* check for existing allocation for this CPU */
- id = atomic_read(&per_cpu(cpu_ids, cpu).id);
- if (id)
goto get_cpu_id_out;
- /*
* Find a new ID.
*
* Use legacy values where possible in the dynamic trace ID allocator to
* allow tools like Android simpleperf to continue working if they are not
I would rather not mention tools name in here. Could we say :
* keep as much backward compatibility as possible with the * older userspace tools, by requesting the "legacy" traceid * if available.
* upgraded at the same time as the kernel drivers.
*
* If the generated legacy ID is invalid, or not available then the next
* available dynamic ID will be used.
*/
- id = coresight_trace_id_alloc_new_id(id_map, CORESIGHT_LEGACY_CPU_TRACE_ID(cpu));
- if (IS_VALID_ID(id)) {
/* got a valid new ID - save details */
atomic_set(&per_cpu(cpu_ids, cpu).id, id);
per_cpu(cpu_ids, cpu).pend_rel = false;
clear_bit(id, id_map->pend_rel_ids);
Couldn't this be moved to coresight_trace_id_alloc_new_id() ? For system pool this is ignored anyways and doesn't matter.
- }
+get_cpu_id_out:
- spin_unlock_irqrestore(&id_map_lock, flags);
- return id;
+}
+static void coresight_trace_id_map_put_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{
- unsigned long flags;
- int id;
- /* check for existing allocation for this CPU */
- id = atomic_read(&per_cpu(cpu_ids, cpu).id);
- if (!id)
goto put_cpu_id_out;
nit: return; ?
- spin_lock_irqsave(&id_map_lock, flags);
- if (atomic_read(&perf_cs_etm_session_active)) {
/* set release at pending if perf still active */
coresight_trace_id_set_pend_rel(id, id_map);
per_cpu(cpu_ids, cpu).pend_rel = true;
- } else {
What prevents another refcount on perf_cs_etm_session_active, after the above read and before we clear this out ? As far as I can see the spinlock doesn't prevent this situation.
/* otherwise clear id */
coresight_trace_id_free(id, id_map);
atomic_set(&per_cpu(cpu_ids, cpu).id, 0);
- }
- spin_unlock_irqrestore(&id_map_lock, flags);
+put_cpu_id_out:
This can be removed ?
+}
Suzuki
Hi Suzuki
On Mon, 3 Oct 2022 at 09:55, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:33, Mike Leach wrote:
The existing mechanism to assign Trace ID values to sources is limited and does not scale for larger multicore / multi trace source systems.
The API introduces functions that reserve IDs based on availabilty represented by a coresight_trace_id_map structure. This records the used and free IDs in a bitmap.
CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id / coresight_trace_id_put_cpu_id pair of functions. The API will record the ID associated with the CPU. This ensures that the same ID will be re-used while perf events are active on the CPU. The put_cpu_id function will pend release of the ID until all perf cs_etm sessions are complete.
Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id / coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach mike.leach@linaro.org
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 4 + .../hwtracing/coresight/coresight-trace-id.c | 230 ++++++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 ++++++ include/linux/coresight-pmu.h | 23 +- 5 files changed, 324 insertions(+), 13 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index b6c4a48140ec..329a0c704b87 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ coresight-sysfs.o coresight-syscfg.o coresight-config.o \ coresight-cfg-preload.o coresight-cfg-afdo.o \
coresight-syscfg-configfs.o
obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o coresight-tmc-y := coresight-tmc-core.o coresight-tmc-etf.o \ coresight-tmc-etr.ocoresight-syscfg-configfs.o coresight-trace-id.o
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 1edfec1e9d18..c7b7c518a0a3 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -22,6 +22,7 @@ #include "coresight-etm-perf.h" #include "coresight-priv.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h"
static DEFINE_MUTEX(coresight_mutex); static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); @@ -1775,6 +1776,9 @@ static int __init coresight_init(void) if (ret) goto exit_bus_unregister;
/* initialise the trace ID allocator */
coresight_trace_id_init();
/* initialise the coresight syscfg API */ ret = cscfg_init(); if (!ret)
diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c new file mode 100644 index 000000000000..ac9092896dec --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright (c) 2022, Linaro Limited, All rights reserved.
- Author: Mike Leach mike.leach@linaro.org
- */
+#include <linux/coresight-pmu.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h>
+#include "coresight-trace-id.h"
+/* need to keep data on ids & association with cpus. */ +struct cpu_id_info {
atomic_t id;
bool pend_rel;
+};
+/* default trace ID map. Used for systems that do not require per sink mappings */ +static struct coresight_trace_id_map id_map_default;
+/* maintain a record of the current mapping of cpu IDs */ +static DEFINE_PER_CPU(struct cpu_id_info, cpu_ids);
+/* perf session active counter */ +static atomic_t perf_cs_etm_session_active = ATOMIC_INIT(0);
+/* lock to protect id_map and cpu data */ +static DEFINE_SPINLOCK(id_map_lock);
+/*
- allocate new ID and set in use
- if @preferred_id is a valid id then try to use that value if available.
- */
+static int coresight_trace_id_alloc_new_id(struct coresight_trace_id_map *id_map,
int preferred_id)
+{
int id;
/* for backwards compatibility reasons, cpu Ids may have a preferred value */
if (IS_VALID_ID(preferred_id) && !test_bit(preferred_id, id_map->used_ids))
id = preferred_id;
else {
/* skip reserved bit 0, look from bit 1 to CORESIGHT_TRACE_ID_RES_TOP */
id = find_next_zero_bit(id_map->used_ids, 1, CORESIGHT_TRACE_ID_RES_TOP);
if (id >= CORESIGHT_TRACE_ID_RES_TOP)
return -EINVAL;
}
/* mark as used */
set_bit(id, id_map->used_ids);
return id;
+}
+static void coresight_trace_id_free(int id, struct coresight_trace_id_map *id_map) +{
if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id))
return;
if (WARN(!test_bit(id, id_map->used_ids),
"%s: Freeing unused ID %d\n", __func__, id))
return;
clear_bit(id, id_map->used_ids);
+}
+static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_map *id_map) +{
if (WARN(!IS_VALID_ID(id), "%s: Invalid Trace ID %d\n", __func__, id))
return;
set_bit(id, id_map->pend_rel_ids);
+}
+/* release all pending IDs for all current maps & clear CPU associations */ +static void coresight_trace_id_release_all_pending(void) +{
struct coresight_trace_id_map *id_map = &id_map_default;
unsigned long flags;
int cpu, bit;
spin_lock_irqsave(&id_map_lock, flags);
for_each_set_bit(bit, id_map->pend_rel_ids, CORESIGHT_TRACE_ID_RES_TOP) {
clear_bit(bit, id_map->used_ids);
clear_bit(bit, id_map->pend_rel_ids);
}
for_each_possible_cpu(cpu) {
if (per_cpu(cpu_ids, cpu).pend_rel) {
per_cpu(cpu_ids, cpu).pend_rel = false;
atomic_set(&per_cpu(cpu_ids, cpu).id, 0);
}
}
Could we use a bitmask for the pending CPUs and use that to track the pending CPUs ? Looping over the "possible" CPUs could be quite time consuming for large system with spin lock held.
DECLARE_BITMAP(cpuid_release_pending, NR_CPUS);
We could do that yes -probably more efficient to scan a bitfield if sparse traced cpus in play.
spin_unlock_irqrestore(&id_map_lock, flags);
+}
+static int coresight_trace_id_map_get_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{
unsigned long flags;
int id;
spin_lock_irqsave(&id_map_lock, flags);
/* check for existing allocation for this CPU */
id = atomic_read(&per_cpu(cpu_ids, cpu).id);
if (id)
goto get_cpu_id_out;
/*
* Find a new ID.
*
* Use legacy values where possible in the dynamic trace ID allocator to
* allow tools like Android simpleperf to continue working if they are not
I would rather not mention tools name in here. Could we say :
* keep as much backward compatibility as possible with the * older userspace tools, by requesting the "legacy" traceid * if available.
sure
* upgraded at the same time as the kernel drivers.
*
* If the generated legacy ID is invalid, or not available then the next
* available dynamic ID will be used.
*/
id = coresight_trace_id_alloc_new_id(id_map, CORESIGHT_LEGACY_CPU_TRACE_ID(cpu));
if (IS_VALID_ID(id)) {
/* got a valid new ID - save details */
atomic_set(&per_cpu(cpu_ids, cpu).id, id);
per_cpu(cpu_ids, cpu).pend_rel = false;
clear_bit(id, id_map->pend_rel_ids);
Couldn't this be moved to coresight_trace_id_alloc_new_id() ? For system pool this is ignored anyways and doesn't matter.
Actually this should always be cleared as we need to ensure an ID we re-use is not also marked as pending. New version will reflect this.
}
+get_cpu_id_out:
spin_unlock_irqrestore(&id_map_lock, flags);
return id;
+}
+static void coresight_trace_id_map_put_cpu_id(int cpu, struct coresight_trace_id_map *id_map) +{
unsigned long flags;
int id;
/* check for existing allocation for this CPU */
id = atomic_read(&per_cpu(cpu_ids, cpu).id);
if (!id)
goto put_cpu_id_out;
nit: return; ?
spin_lock_irqsave(&id_map_lock, flags);
if (atomic_read(&perf_cs_etm_session_active)) {
/* set release at pending if perf still active */
coresight_trace_id_set_pend_rel(id, id_map);
per_cpu(cpu_ids, cpu).pend_rel = true;
} else {
What prevents another refcount on perf_cs_etm_session_active, after the above read and before we clear this out ? As far as I can see the spinlock doesn't prevent this situation.
It does not, and it does not matter.
The spinlock prevents IDs being simultaneously allocated and freed. If a new perf session increments perf_cs_etm_session_active from 0->1 within this spinlock, then that perf session cannot start allocating ids for CPUs in the session till the spinlock is released. If a current perf session decrements perf_cs_etm_session_active from 1->0, within this spinlock, then the action in coresight_trace_id_perf_stop() to call coresight_trace_id_release_all_pending() cannot complete until the spinlock is released.
Thanks and regards
Mike
/* otherwise clear id */
coresight_trace_id_free(id, id_map);
atomic_set(&per_cpu(cpu_ids, cpu).id, 0);
}
spin_unlock_irqrestore(&id_map_lock, flags);
+put_cpu_id_out:
This can be removed ?
+}
Suzuki
The checks for sources to have unique IDs has been removed - this is now guaranteed by the ID allocation mechanisms, and inappropriate where multiple ID maps are in use in larger systems
Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/coresight-core.c | 45 -------------------- 1 file changed, 45 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index c7b7c518a0a3..cde1b4704727 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -85,45 +85,6 @@ struct coresight_device *coresight_get_percpu_sink(int cpu) } EXPORT_SYMBOL_GPL(coresight_get_percpu_sink);
-static int coresight_id_match(struct device *dev, void *data) -{ - int trace_id, i_trace_id; - struct coresight_device *csdev, *i_csdev; - - csdev = data; - i_csdev = to_coresight_device(dev); - - /* - * No need to care about oneself and components that are not - * sources or not enabled - */ - if (i_csdev == csdev || !i_csdev->enable || - i_csdev->type != CORESIGHT_DEV_TYPE_SOURCE) - return 0; - - /* Get the source ID for both components */ - trace_id = source_ops(csdev)->trace_id(csdev); - i_trace_id = source_ops(i_csdev)->trace_id(i_csdev); - - /* All you need is one */ - if (trace_id == i_trace_id) - return 1; - - return 0; -} - -static int coresight_source_is_unique(struct coresight_device *csdev) -{ - int trace_id = source_ops(csdev)->trace_id(csdev); - - /* this shouldn't happen */ - if (trace_id < 0) - return 0; - - return !bus_for_each_dev(&coresight_bustype, NULL, - csdev, coresight_id_match); -} - static int coresight_find_link_inport(struct coresight_device *csdev, struct coresight_device *parent) { @@ -432,12 +393,6 @@ static int coresight_enable_source(struct coresight_device *csdev, u32 mode) { int ret;
- if (!coresight_source_is_unique(csdev)) { - dev_warn(&csdev->dev, "traceID %d not unique\n", - source_ops(csdev)->trace_id(csdev)); - return -EINVAL; - } - if (!csdev->enable) { if (source_ops(csdev)->enable) { ret = coresight_control_assoc_ectdev(csdev, true);
On 09/08/2022 23:33, Mike Leach wrote:
The checks for sources to have unique IDs has been removed - this is now guaranteed by the ID allocation mechanisms, and inappropriate where multiple ID maps are in use in larger systems
Signed-off-by: Mike Leach mike.leach@linaro.org
Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com --- drivers/hwtracing/coresight/coresight-stm.c | 41 +++++++-------------- 1 file changed, 14 insertions(+), 27 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index bb14a3a8a921..9ef3e923a930 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -31,6 +31,7 @@ #include <linux/stm.h>
#include "coresight-priv.h" +#include "coresight-trace-id.h"
#define STMDMASTARTR 0xc04 #define STMDMASTOPR 0xc08 @@ -615,24 +616,7 @@ static ssize_t traceid_show(struct device *dev, val = drvdata->traceid; return sprintf(buf, "%#lx\n", val); } - -static ssize_t traceid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int ret; - unsigned long val; - struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent); - - ret = kstrtoul(buf, 16, &val); - if (ret) - return ret; - - /* traceid field is 7bit wide on STM32 */ - drvdata->traceid = val & 0x7f; - return size; -} -static DEVICE_ATTR_RW(traceid); +static DEVICE_ATTR_RO(traceid);
#define coresight_stm_reg(name, offset) \ coresight_simple_reg32(struct stm_drvdata, name, offset) @@ -819,14 +803,6 @@ static void stm_init_default_data(struct stm_drvdata *drvdata) */ drvdata->stmsper = ~0x0;
- /* - * The trace ID value for *ETM* tracers start at CPU_ID * 2 + 0x10 and - * anything equal to or higher than 0x70 is reserved. Since 0x00 is - * also reserved the STM trace ID needs to be higher than 0x00 and - * lowner than 0x10. - */ - drvdata->traceid = 0x1; - /* Set invariant transaction timing on all channels */ bitmap_clear(drvdata->chs.guaranteed, 0, drvdata->numsp); } @@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
static int stm_probe(struct amba_device *adev, const struct amba_id *id) { - int ret; + int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL; @@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
+ trace_id = coresight_trace_id_get_system_id(); + if (trace_id < 0) { + ret = trace_id; + goto cs_unregister; + } + drvdata->traceid = (u8)trace_id; + pm_runtime_put(&adev->dev);
dev_info(&drvdata->csdev->dev, "%s initialized\n", (char *)coresight_get_uci_data(id)); return 0;
+cs_unregister: + coresight_unregister(drvdata->csdev); + stm_unregister: stm_unregister_device(&drvdata->stm); return ret; @@ -953,6 +939,7 @@ static void stm_remove(struct amba_device *adev) { struct stm_drvdata *drvdata = dev_get_drvdata(&adev->dev);
+ coresight_trace_id_put_system_id(drvdata->traceid); coresight_unregister(drvdata->csdev);
stm_unregister_device(&drvdata->stm);
On 09/08/2022 23:33, Mike Leach wrote:
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
drivers/hwtracing/coresight/coresight-stm.c | 41 +++++++-------------- 1 file changed, 14 insertions(+), 27 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index bb14a3a8a921..9ef3e923a930 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -31,6 +31,7 @@ #include <linux/stm.h> #include "coresight-priv.h" +#include "coresight-trace-id.h" #define STMDMASTARTR 0xc04 #define STMDMASTOPR 0xc08 @@ -615,24 +616,7 @@ static ssize_t traceid_show(struct device *dev, val = drvdata->traceid; return sprintf(buf, "%#lx\n", val); }
-static ssize_t traceid_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
-{
- int ret;
- unsigned long val;
- struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent);
- ret = kstrtoul(buf, 16, &val);
- if (ret)
return ret;
- /* traceid field is 7bit wide on STM32 */
- drvdata->traceid = val & 0x7f;
- return size;
-} -static DEVICE_ATTR_RW(traceid); +static DEVICE_ATTR_RO(traceid); #define coresight_stm_reg(name, offset) \ coresight_simple_reg32(struct stm_drvdata, name, offset) @@ -819,14 +803,6 @@ static void stm_init_default_data(struct stm_drvdata *drvdata) */ drvdata->stmsper = ~0x0;
- /*
* The trace ID value for *ETM* tracers start at CPU_ID * 2 + 0x10 and
* anything equal to or higher than 0x70 is reserved. Since 0x00 is
* also reserved the STM trace ID needs to be higher than 0x00 and
* lowner than 0x10.
*/
- drvdata->traceid = 0x1;
- /* Set invariant transaction timing on all channels */ bitmap_clear(drvdata->chs.guaranteed, 0, drvdata->numsp); }
@@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata, static int stm_probe(struct amba_device *adev, const struct amba_id *id) {
- int ret;
- int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL;
@@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
- trace_id = coresight_trace_id_get_system_id();
- if (trace_id < 0) {
The above API returns "INVALID_ID" and not a negative error status. I think it is better to fix the API to return:
ret < 0 - If there is any error - Otherwise a positive integer And the users should be kept unaware of which ID is valid or invalid.
Suzuki
Hi Suzuki,
On Mon, 3 Oct 2022 at 10:04, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:33, Mike Leach wrote:
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
drivers/hwtracing/coresight/coresight-stm.c | 41 +++++++-------------- 1 file changed, 14 insertions(+), 27 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index bb14a3a8a921..9ef3e923a930 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -31,6 +31,7 @@ #include <linux/stm.h>
#include "coresight-priv.h" +#include "coresight-trace-id.h"
#define STMDMASTARTR 0xc04 #define STMDMASTOPR 0xc08 @@ -615,24 +616,7 @@ static ssize_t traceid_show(struct device *dev, val = drvdata->traceid; return sprintf(buf, "%#lx\n", val); }
-static ssize_t traceid_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
-{
int ret;
unsigned long val;
struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent);
ret = kstrtoul(buf, 16, &val);
if (ret)
return ret;
/* traceid field is 7bit wide on STM32 */
drvdata->traceid = val & 0x7f;
return size;
-} -static DEVICE_ATTR_RW(traceid); +static DEVICE_ATTR_RO(traceid);
#define coresight_stm_reg(name, offset) \ coresight_simple_reg32(struct stm_drvdata, name, offset) @@ -819,14 +803,6 @@ static void stm_init_default_data(struct stm_drvdata *drvdata) */ drvdata->stmsper = ~0x0;
/*
* The trace ID value for *ETM* tracers start at CPU_ID * 2 + 0x10 and
* anything equal to or higher than 0x70 is reserved. Since 0x00 is
* also reserved the STM trace ID needs to be higher than 0x00 and
* lowner than 0x10.
*/
drvdata->traceid = 0x1;
}/* Set invariant transaction timing on all channels */ bitmap_clear(drvdata->chs.guaranteed, 0, drvdata->numsp);
@@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
static int stm_probe(struct amba_device *adev, const struct amba_id *id) {
int ret;
int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL;
@@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
trace_id = coresight_trace_id_get_system_id();
if (trace_id < 0) {
The above API returns "INVALID_ID" and not a negative error status. I think it is better to fix the API to return:
ret < 0 - If there is any error - Otherwise a positive integer And the users should be kept unaware of which ID is valid or invalid.
coresight_trace_id_get_system_id() returns the ID if one can be allocated or -EINVAL if not.
Not sure what you are looking at here.
Mike
Suzuki
On 06/10/2022 14:54, Mike Leach wrote:
Hi Suzuki,
On Mon, 3 Oct 2022 at 10:04, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:33, Mike Leach wrote:
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
@@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
static int stm_probe(struct amba_device *adev, const struct amba_id *id) {
int ret;
int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL;
@@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
trace_id = coresight_trace_id_get_system_id();
if (trace_id < 0) {
The above API returns "INVALID_ID" and not a negative error status. I think it is better to fix the API to return:
ret < 0 - If there is any error - Otherwise a positive integer
And the users should be kept unaware of which ID is valid or invalid.
coresight_trace_id_get_system_id() returns the ID if one can be allocated or -EINVAL if not.
Not sure what you are looking at here.
Sorry, indeed I was mistaken there. It is the get_cpu_id() which returns the INVALID_ID on failure. Please could we make that consistent with this scheme ? i.e, < 0 on error.
Also, please could we add a comment above the exported functions on their entry/exit criteria ? It is not clearly evident, unless we follow the code and figure out.
Cheers Suzuki
Hi suzuki,
On Fri, 7 Oct 2022 at 18:53, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 06/10/2022 14:54, Mike Leach wrote:
Hi Suzuki,
On Mon, 3 Oct 2022 at 10:04, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:33, Mike Leach wrote:
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
@@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
static int stm_probe(struct amba_device *adev, const struct amba_id *id) {
int ret;
int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL;
@@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
trace_id = coresight_trace_id_get_system_id();
if (trace_id < 0) {
The above API returns "INVALID_ID" and not a negative error status. I think it is better to fix the API to return:
ret < 0 - If there is any error - Otherwise a positive integer
And the users should be kept unaware of which ID is valid or invalid.
coresight_trace_id_get_system_id() returns the ID if one can be allocated or -EINVAL if not.
Not sure what you are looking at here.
Sorry, indeed I was mistaken there. It is the get_cpu_id() which returns the INVALID_ID on failure. Please could we make that consistent with this scheme ? i.e, < 0 on error.
That also returns -EINVAL, as both call the same underlying allocator.
However happy to add on the comments for the exported functions
Regards
Mike
Also, please could we add a comment above the exported functions on their entry/exit criteria ? It is not clearly evident, unless we follow the code and figure out.
Cheers Suzuki
On 11/10/2022 12:10, Mike Leach wrote:
Hi suzuki,
On Fri, 7 Oct 2022 at 18:53, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 06/10/2022 14:54, Mike Leach wrote:
Hi Suzuki,
On Mon, 3 Oct 2022 at 10:04, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:33, Mike Leach wrote:
Updates the STM driver to use the trace ID allocation API. This uses the _system_id calls to allocate an ID on device poll, and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW to RO. Having this value as writable is not appropriate for the new Trace ID scheme - and had potential to cause errors in the previous scheme if values clashed with other sources.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com
@@ -854,7 +830,7 @@ static void stm_init_generic_data(struct stm_drvdata *drvdata,
static int stm_probe(struct amba_device *adev, const struct amba_id *id) {
int ret;
int ret, trace_id; void __iomem *base; struct device *dev = &adev->dev; struct coresight_platform_data *pdata = NULL;
@@ -938,12 +914,22 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id) goto stm_unregister; }
trace_id = coresight_trace_id_get_system_id();
if (trace_id < 0) {
The above API returns "INVALID_ID" and not a negative error status. I think it is better to fix the API to return:
ret < 0 - If there is any error - Otherwise a positive integer
And the users should be kept unaware of which ID is valid or invalid.
coresight_trace_id_get_system_id() returns the ID if one can be allocated or -EINVAL if not.
Not sure what you are looking at here.
Sorry, indeed I was mistaken there. It is the get_cpu_id() which returns the INVALID_ID on failure. Please could we make that consistent with this scheme ? i.e, < 0 on error.
That also returns -EINVAL, as both call the same underlying allocator.
You're right, the check in coresight_trace_id_map_get_cpu_id(), confused me.
However happy to add on the comments for the exported functions
Yes, please.
Thanks Mike
Suzuki
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE devices.
For perf sessions, these will be allocated on enable, and released on disable.
For sysfs sessions, these will be allocated on enable, but only released on reset. This allows the sysfs session to interrogate the Trace ID used after the session is over - maintaining functional consistency with the previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file. This ensures that if perf or sysfs read this before enabling trace, the value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach mike.leach@linaro.org --- .../coresight/coresight-etm4x-core.c | 79 +++++++++++++++++-- .../coresight/coresight-etm4x-sysfs.c | 27 ++++++- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + 3 files changed, 100 insertions(+), 9 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index cf249ecad5a5..b4fb28ce89fd 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -42,6 +42,7 @@ #include "coresight-etm4x-cfg.h" #include "coresight-self-hosted-trace.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h"
static int boot_enable; module_param(boot_enable, int, 0444); @@ -234,6 +235,50 @@ static int etm4_trace_id(struct coresight_device *csdev) return drvdata->trcid; }
+int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata) +{ + int trace_id; + + /* + * This will allocate a trace ID to the cpu, + * or return the one currently allocated. + */ + /* trace id function has its own lock */ + trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu); + if (IS_VALID_ID(trace_id)) + drvdata->trcid = (u8)trace_id; + else + dev_err(&drvdata->csdev->dev, + "Failed to allocate trace ID for %s on CPU%d\n", + dev_name(&drvdata->csdev->dev), drvdata->cpu); + return trace_id; +} + +static int etm4_set_current_trace_id(struct etmv4_drvdata *drvdata) +{ + int trace_id; + + /* + * Set the currently allocated trace ID - perf allocates IDs + * as part of setup_aux for all CPUs it may use. + */ + trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu); + if (IS_VALID_ID(trace_id)) { + drvdata->trcid = (u8)trace_id; + return 0; + } + + dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on CPU%d\n", + dev_name(&drvdata->csdev->dev), drvdata->cpu); + + return -EINVAL; +} + +void etm4_release_trace_id(struct etmv4_drvdata *drvdata) +{ + coresight_trace_id_put_cpu_id(drvdata->cpu); +} + struct etm4_enable_arg { struct etmv4_drvdata *drvdata; int rc; @@ -729,6 +774,15 @@ static int etm4_enable_perf(struct coresight_device *csdev, ret = etm4_parse_event_config(csdev, event); if (ret) goto out; + + /* + * perf allocates cpu ids as part of setup - device needs to use + * the allocated ID. + */ + ret = etm4_set_current_trace_id(drvdata); + if (ret < 0) + goto out; + /* And enable it */ ret = etm4_enable_hw(drvdata);
@@ -753,6 +807,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev)
spin_lock(&drvdata->spinlock);
+ /* sysfs needs to read and allocate a trace ID */ + ret = etm4_read_alloc_trace_id(drvdata); + if (ret < 0) + goto unlock_sysfs_enable; + /* * Executing etm4_enable_hw on the cpu whose ETM is being enabled * ensures that register writes occur when cpu is powered. @@ -764,6 +823,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) ret = arg.rc; if (!ret) drvdata->sticky_enable = true; + + if (ret) + etm4_release_trace_id(drvdata); + +unlock_sysfs_enable: spin_unlock(&drvdata->spinlock);
if (!ret) @@ -895,6 +959,8 @@ static int etm4_disable_perf(struct coresight_device *csdev, /* TRCVICTLR::SSSTATUS, bit[9] */ filters->ssstatus = (control & BIT(9));
+ /* The perf event will release trace ids when it is destroyed */ + return 0; }
@@ -920,6 +986,13 @@ static void etm4_disable_sysfs(struct coresight_device *csdev) spin_unlock(&drvdata->spinlock); cpus_read_unlock();
+ /* + * we only release trace IDs when resetting sysfs. + * This permits sysfs users to read the trace ID after the trace + * session has completed. This maintains operational behaviour with + * prior trace id allocation method + */ + dev_dbg(&csdev->dev, "ETM tracing disabled\n"); }
@@ -1562,11 +1635,6 @@ static int etm4_dying_cpu(unsigned int cpu) return 0; }
-static void etm4_init_trace_id(struct etmv4_drvdata *drvdata) -{ - drvdata->trcid = coresight_get_trace_id(drvdata->cpu); -} - static int __etm4_cpu_save(struct etmv4_drvdata *drvdata) { int i, ret = 0; @@ -1971,7 +2039,6 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid) if (!desc.name) return -ENOMEM;
- etm4_init_trace_id(drvdata); etm4_set_default(&drvdata->config);
pdata = coresight_get_platform_data(dev); diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 6ea8181816fc..d3c27c521d43 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -266,10 +266,11 @@ static ssize_t reset_store(struct device *dev, config->vmid_mask0 = 0x0; config->vmid_mask1 = 0x0;
- drvdata->trcid = drvdata->cpu + 1; - spin_unlock(&drvdata->spinlock);
+ /* for sysfs - only release trace id when resetting */ + etm4_release_trace_id(drvdata); + cscfg_csdev_reset_feats(to_coresight_device(dev));
return size; @@ -2363,6 +2364,26 @@ static struct attribute *coresight_etmv4_attrs[] = { NULL, };
+/* + * Trace ID allocated dynamically on enable - but also allocate on read + * in case sysfs or perf read before enable to ensure consistent metadata + * information for trace decode + */ +static ssize_t trctraceid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int trace_id; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + + trace_id = etm4_read_alloc_trace_id(drvdata); + if (trace_id < 0) + return trace_id; + + return sysfs_emit(buf, "0x%x\n", trace_id); +} +static DEVICE_ATTR_RO(trctraceid); + struct etmv4_reg { struct coresight_device *csdev; u32 offset; @@ -2499,7 +2520,7 @@ static struct attribute *coresight_etmv4_mgmt_attrs[] = { coresight_etm4x_reg(trcpidr3, TRCPIDR3), coresight_etm4x_reg(trcoslsr, TRCOSLSR), coresight_etm4x_reg(trcconfig, TRCCONFIGR), - coresight_etm4x_reg(trctraceid, TRCTRACEIDR), + &dev_attr_trctraceid.attr, coresight_etm4x_reg(trcdevarch, TRCDEVARCH), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index a7bfea31f7d8..793c361841d4 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -1095,4 +1095,7 @@ static inline bool etm4x_is_ete(struct etmv4_drvdata *drvdata) { return drvdata->arch >= ETM_ARCH_ETE; } + +int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata); +void etm4_release_trace_id(struct etmv4_drvdata *drvdata); #endif
On 09/08/2022 23:33, Mike Leach wrote:
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE devices.
For perf sessions, these will be allocated on enable, and released on disable.
For sysfs sessions, these will be allocated on enable, but only released on reset. This allows the sysfs session to interrogate the Trace ID used after the session is over - maintaining functional consistency with the previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file. This ensures that if perf or sysfs read this before enabling trace, the value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach mike.leach@linaro.org
.../coresight/coresight-etm4x-core.c | 79 +++++++++++++++++-- .../coresight/coresight-etm4x-sysfs.c | 27 ++++++- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + 3 files changed, 100 insertions(+), 9 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index cf249ecad5a5..b4fb28ce89fd 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -42,6 +42,7 @@ #include "coresight-etm4x-cfg.h" #include "coresight-self-hosted-trace.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h" static int boot_enable; module_param(boot_enable, int, 0444); @@ -234,6 +235,50 @@ static int etm4_trace_id(struct coresight_device *csdev) return drvdata->trcid; } +int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata) +{
- int trace_id;
- /*
* This will allocate a trace ID to the cpu,
* or return the one currently allocated.
*/
- /* trace id function has its own lock */
- trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu);
- if (IS_VALID_ID(trace_id))
drvdata->trcid = (u8)trace_id;
- else
dev_err(&drvdata->csdev->dev,
"Failed to allocate trace ID for %s on CPU%d\n",
dev_name(&drvdata->csdev->dev), drvdata->cpu);
- return trace_id;
+}
+static int etm4_set_current_trace_id(struct etmv4_drvdata *drvdata) +{
- int trace_id;
- /*
* Set the currently allocated trace ID - perf allocates IDs
* as part of setup_aux for all CPUs it may use.
*/
- trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu);
- if (IS_VALID_ID(trace_id)) {
drvdata->trcid = (u8)trace_id;
return 0;
- }
- dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on CPU%d\n",
dev_name(&drvdata->csdev->dev), drvdata->cpu);
- return -EINVAL;
+}
+void etm4_release_trace_id(struct etmv4_drvdata *drvdata) +{
- coresight_trace_id_put_cpu_id(drvdata->cpu);
+}
- struct etm4_enable_arg { struct etmv4_drvdata *drvdata; int rc;
@@ -729,6 +774,15 @@ static int etm4_enable_perf(struct coresight_device *csdev, ret = etm4_parse_event_config(csdev, event); if (ret) goto out;
- /*
* perf allocates cpu ids as part of setup - device needs to use
* the allocated ID.
*/
- ret = etm4_set_current_trace_id(drvdata);
So, when do we allocate an id in perf mode ? As far as I can see, this should be the same as etm4_read_alloc_trace_id() ? Why are they any different ?
- if (ret < 0)
goto out;
- /* And enable it */ ret = etm4_enable_hw(drvdata);
@@ -753,6 +807,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) spin_lock(&drvdata->spinlock);
- /* sysfs needs to read and allocate a trace ID */
- ret = etm4_read_alloc_trace_id(drvdata);
- if (ret < 0)
goto unlock_sysfs_enable;
- /*
- Executing etm4_enable_hw on the cpu whose ETM is being enabled
- ensures that register writes occur when cpu is powered.
@@ -764,6 +823,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) ret = arg.rc; if (!ret) drvdata->sticky_enable = true;
- if (ret)
etm4_release_trace_id(drvdata);
+unlock_sysfs_enable: spin_unlock(&drvdata->spinlock); if (!ret) @@ -895,6 +959,8 @@ static int etm4_disable_perf(struct coresight_device *csdev, /* TRCVICTLR::SSSTATUS, bit[9] */ filters->ssstatus = (control & BIT(9));
- /* The perf event will release trace ids when it is destroyed */
At this patch level, there is no release of trace id ? Is that missed in this patch ? Or am I missing something ?
Suzuki
On 03/10/2022 10:31, Suzuki K Poulose wrote:
On 09/08/2022 23:33, Mike Leach wrote:
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE devices.
For perf sessions, these will be allocated on enable, and released on disable.
For sysfs sessions, these will be allocated on enable, but only released on reset. This allows the sysfs session to interrogate the Trace ID used after the session is over - maintaining functional consistency with the previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file. This ensures that if perf or sysfs read this before enabling trace, the value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach mike.leach@linaro.org
.../coresight/coresight-etm4x-core.c         | 79 +++++++++++++++++--  .../coresight/coresight-etm4x-sysfs.c        | 27 ++++++-  drivers/hwtracing/coresight/coresight-etm4x.h | 3 +  3 files changed, 100 insertions(+), 9 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index cf249ecad5a5..b4fb28ce89fd 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -42,6 +42,7 @@ Â #include "coresight-etm4x-cfg.h" Â #include "coresight-self-hosted-trace.h" Â #include "coresight-syscfg.h" +#include "coresight-trace-id.h" Â static int boot_enable; Â module_param(boot_enable, int, 0444); @@ -234,6 +235,50 @@ static int etm4_trace_id(struct coresight_device *csdev) Â Â Â Â Â return drvdata->trcid; Â } +int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata) +{ +Â Â Â int trace_id;
+Â Â Â /* +Â Â Â Â * This will allocate a trace ID to the cpu, +Â Â Â Â * or return the one currently allocated. +Â Â Â Â */ +Â Â Â /* trace id function has its own lock */ +Â Â Â trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu); +Â Â Â if (IS_VALID_ID(trace_id)) +Â Â Â Â Â Â Â drvdata->trcid = (u8)trace_id; +Â Â Â else +Â Â Â Â Â Â Â dev_err(&drvdata->csdev->dev, +Â Â Â Â Â Â Â Â Â Â Â "Failed to allocate trace ID for %s on CPU%d\n", +Â Â Â Â Â Â Â Â Â Â Â dev_name(&drvdata->csdev->dev), drvdata->cpu); +Â Â Â return trace_id; +}
+static int etm4_set_current_trace_id(struct etmv4_drvdata *drvdata) +{ +Â Â Â int trace_id;
+Â Â Â /* +Â Â Â Â * Set the currently allocated trace ID - perf allocates IDs +Â Â Â Â * as part of setup_aux for all CPUs it may use. +Â Â Â Â */ +Â Â Â trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu); +Â Â Â if (IS_VALID_ID(trace_id)) { +Â Â Â Â Â Â Â drvdata->trcid = (u8)trace_id; +Â Â Â Â Â Â Â return 0; +Â Â Â }
+Â Â Â dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on CPU%d\n", +Â Â Â Â Â Â Â dev_name(&drvdata->csdev->dev), drvdata->cpu);
+Â Â Â return -EINVAL; +}
+void etm4_release_trace_id(struct etmv4_drvdata *drvdata) +{ +Â Â Â coresight_trace_id_put_cpu_id(drvdata->cpu); +}
struct etm4_enable_arg { Â Â Â Â Â struct etmv4_drvdata *drvdata; Â Â Â Â Â int rc; @@ -729,6 +774,15 @@ static int etm4_enable_perf(struct coresight_device *csdev, Â Â Â Â Â ret = etm4_parse_event_config(csdev, event); Â Â Â Â Â if (ret) Â Â Â Â Â Â Â Â Â goto out;
+Â Â Â /* +Â Â Â Â * perf allocates cpu ids as part of setup - device needs to use +Â Â Â Â * the allocated ID. +Â Â Â Â */ +Â Â Â ret = etm4_set_current_trace_id(drvdata);
So, when do we allocate an id in perf mode ? As far as I can see, this should be the same as etm4_read_alloc_trace_id() ? Why are they any different ?
+Â Â Â if (ret < 0) +Â Â Â Â Â Â Â goto out;
/* And enable it */ Â Â Â Â Â ret = etm4_enable_hw(drvdata); @@ -753,6 +807,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) Â Â Â Â Â spin_lock(&drvdata->spinlock); +Â Â Â /* sysfs needs to read and allocate a trace ID */ +Â Â Â ret = etm4_read_alloc_trace_id(drvdata); +Â Â Â if (ret < 0) +Â Â Â Â Â Â Â goto unlock_sysfs_enable;
/*       * Executing etm4_enable_hw on the cpu whose ETM is being enabled       * ensures that register writes occur when cpu is powered. @@ -764,6 +823,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev)          ret = arg.rc;      if (!ret)          drvdata->sticky_enable = true;
+Â Â Â if (ret) +Â Â Â Â Â Â Â etm4_release_trace_id(drvdata);
+unlock_sysfs_enable: Â Â Â Â Â spin_unlock(&drvdata->spinlock); Â Â Â Â Â if (!ret) @@ -895,6 +959,8 @@ static int etm4_disable_perf(struct coresight_device *csdev, Â Â Â Â Â /* TRCVICTLR::SSSTATUS, bit[9] */ Â Â Â Â Â filters->ssstatus = (control & BIT(9)); +Â Â Â /* The perf event will release trace ids when it is destroyed */
At this patch level, there is no release of trace id ? Is that missed in this patch ? Or am I missing something ?
I think the above change only comes in PATCH 7. May be that patch needs to be rearranged in order ? Otherwise git-bisect can break running a perf session on cs_etm, with missing traceid.
Suzuki
Hi Suzuki,
On Mon, 3 Oct 2022 at 10:37, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 03/10/2022 10:31, Suzuki K Poulose wrote:
On 09/08/2022 23:33, Mike Leach wrote:
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE devices.
For perf sessions, these will be allocated on enable, and released on disable.
For sysfs sessions, these will be allocated on enable, but only released on reset. This allows the sysfs session to interrogate the Trace ID used after the session is over - maintaining functional consistency with the previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file. This ensures that if perf or sysfs read this before enabling trace, the value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach mike.leach@linaro.org
.../coresight/coresight-etm4x-core.c | 79 +++++++++++++++++-- .../coresight/coresight-etm4x-sysfs.c | 27 ++++++- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + 3 files changed, 100 insertions(+), 9 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index cf249ecad5a5..b4fb28ce89fd 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -42,6 +42,7 @@ #include "coresight-etm4x-cfg.h" #include "coresight-self-hosted-trace.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h" static int boot_enable; module_param(boot_enable, int, 0444); @@ -234,6 +235,50 @@ static int etm4_trace_id(struct coresight_device *csdev) return drvdata->trcid; } +int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata) +{
- int trace_id;
- /*
* This will allocate a trace ID to the cpu,
* or return the one currently allocated.
*/
- /* trace id function has its own lock */
- trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu);
- if (IS_VALID_ID(trace_id))
drvdata->trcid = (u8)trace_id;
- else
dev_err(&drvdata->csdev->dev,
"Failed to allocate trace ID for %s on CPU%d\n",
dev_name(&drvdata->csdev->dev), drvdata->cpu);
- return trace_id;
+}
+static int etm4_set_current_trace_id(struct etmv4_drvdata *drvdata) +{
- int trace_id;
- /*
* Set the currently allocated trace ID - perf allocates IDs
* as part of setup_aux for all CPUs it may use.
*/
- trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu);
- if (IS_VALID_ID(trace_id)) {
drvdata->trcid = (u8)trace_id;
return 0;
- }
- dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on
CPU%d\n",
dev_name(&drvdata->csdev->dev), drvdata->cpu);
- return -EINVAL;
+}
+void etm4_release_trace_id(struct etmv4_drvdata *drvdata) +{
- coresight_trace_id_put_cpu_id(drvdata->cpu);
+}
- struct etm4_enable_arg { struct etmv4_drvdata *drvdata; int rc;
@@ -729,6 +774,15 @@ static int etm4_enable_perf(struct coresight_device *csdev, ret = etm4_parse_event_config(csdev, event); if (ret) goto out;
- /*
* perf allocates cpu ids as part of setup - device needs to use
* the allocated ID.
*/
- ret = etm4_set_current_trace_id(drvdata);
So, when do we allocate an id in perf mode ? As far as I can see, this should be the same as etm4_read_alloc_trace_id() ? Why are they any different ?
Trace IDs are allocated in etm_setup_aux(), then released in free_event_data(). This way the value are guaranteed to remain constant for the entire session,. We cannot release an ID when a given ETM stops tracing, as it may restart later for the same perf session. In between these two events perf takes its own locks - for whatever reason. If we use read_alloc trace id - which takes that allocation / release lock in the ID system then we see at lot of LOCKDEP issues at this point.
Hence we do a safe unlocked read of the value - perf will never release the value till after the session is completed and the event is released.
- if (ret < 0)
goto out;
/* And enable it */ ret = etm4_enable_hw(drvdata);
@@ -753,6 +807,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) spin_lock(&drvdata->spinlock);
- /* sysfs needs to read and allocate a trace ID */
- ret = etm4_read_alloc_trace_id(drvdata);
- if (ret < 0)
goto unlock_sysfs_enable;
/* * Executing etm4_enable_hw on the cpu whose ETM is being enabled * ensures that register writes occur when cpu is powered.
@@ -764,6 +823,11 @@ static int etm4_enable_sysfs(struct coresight_device *csdev) ret = arg.rc; if (!ret) drvdata->sticky_enable = true;
- if (ret)
etm4_release_trace_id(drvdata);
+unlock_sysfs_enable: spin_unlock(&drvdata->spinlock); if (!ret) @@ -895,6 +959,8 @@ static int etm4_disable_perf(struct coresight_device *csdev, /* TRCVICTLR::SSSTATUS, bit[9] */ filters->ssstatus = (control & BIT(9));
- /* The perf event will release trace ids when it is destroyed */
At this patch level, there is no release of trace id ? Is that missed in this patch ? Or am I missing something ?
See above - perf allocation is handled in coresight-etm-perf.c.
I think the above change only comes in PATCH 7. May be that patch needs to be rearranged in order ? Otherwise git-bisect can break running a perf session on cs_etm, with missing traceid.
This is probably true - we can move the perf allocation to before the ETM changes as the extended backward compatibility introduced this set should permit it.
Suzuki
Thanks for the review
Mike
Use the TraceID API to allocate ETM trace IDs dynamically.
As with the etm4x we allocate on enable / disable for perf, allocate on enable / reset for sysfs.
Additionally we allocate on sysfs file read as both perf and sysfs can read the ID before enabling the hardware.
Remove sysfs option to write trace ID - which is inconsistent with both the dynamic allocation method and the fixed allocation method previously used.
Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/coresight-etm.h | 2 + .../coresight/coresight-etm3x-core.c | 77 +++++++++++++++++-- .../coresight/coresight-etm3x-sysfs.c | 27 ++----- 3 files changed, 79 insertions(+), 27 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index f3ab96eaf44e..3667428d38b6 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -287,4 +287,6 @@ int etm_get_trace_id(struct etm_drvdata *drvdata); void etm_set_default(struct etm_config *config); void etm_config_trace_mode(struct etm_config *config); struct etm_config *get_etm_config(struct etm_drvdata *drvdata); +int etm_read_alloc_trace_id(struct etm_drvdata *drvdata); +void etm_release_trace_id(struct etm_drvdata *drvdata); #endif diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index d0ab9933472b..c4e7b3337a5c 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -32,6 +32,7 @@
#include "coresight-etm.h" #include "coresight-etm-perf.h" +#include "coresight-trace-id.h"
/* * Not really modular but using module_param is the easiest way to @@ -490,18 +491,67 @@ static int etm_trace_id(struct coresight_device *csdev) return etm_get_trace_id(drvdata); }
+int etm_read_alloc_trace_id(struct etm_drvdata *drvdata) +{ + int trace_id; + + /* trace id function has its own lock */ + trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu); + if (IS_VALID_ID(trace_id)) + drvdata->traceid = (u8)trace_id; + else + dev_err(&drvdata->csdev->dev, + "Failed to allocate trace ID for %s on CPU%d\n", + dev_name(&drvdata->csdev->dev), drvdata->cpu); + return trace_id; +} + +static int etm_set_current_trace_id(struct etmv4_drvdata *drvdata) +{ + int trace_id; + + /* + * Set the currently allocated trace ID - perf allocates IDs + * as part of setup_aux for all CPUs it may use. + */ + trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu); + if (IS_VALID_ID(trace_id)) { + drvdata->traceid = (u8)trace_id; + return 0; + } + + dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on CPU%d\n", + dev_name(&drvdata->csdev->dev), drvdata->cpu); + + return -EINVAL; +} + +void etm_release_trace_id(struct etm_drvdata *drvdata) +{ + coresight_trace_id_put_cpu_id(drvdata->cpu); +} + static int etm_enable_perf(struct coresight_device *csdev, struct perf_event *event) { struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + int ret;
if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) return -EINVAL;
/* Configure the tracer based on the session's specifics */ etm_parse_event_config(drvdata, event); + + /* perf allocates cpu IDs in setup aux - set the current on device */ + ret = etm_set_current_trace_id(drvdata); + if (ret < 0) + return ret; + /* And enable it */ - return etm_enable_hw(drvdata); + ret = etm_enable_hw(drvdata); + + return ret; }
static int etm_enable_sysfs(struct coresight_device *csdev) @@ -512,6 +562,11 @@ static int etm_enable_sysfs(struct coresight_device *csdev)
spin_lock(&drvdata->spinlock);
+ /* sysfs needs to allocate and set a trace ID */ + ret = etm_read_alloc_trace_id(drvdata); + if (ret < 0) + goto unlock_enable_sysfs; + /* * Configure the ETM only if the CPU is online. If it isn't online * hw configuration will take place on the local CPU during bring up. @@ -528,6 +583,10 @@ static int etm_enable_sysfs(struct coresight_device *csdev) ret = -ENODEV; }
+ if (ret) + etm_release_trace_id(drvdata); + +unlock_enable_sysfs: spin_unlock(&drvdata->spinlock);
if (!ret) @@ -611,6 +670,9 @@ static void etm_disable_perf(struct coresight_device *csdev) coresight_disclaim_device_unlocked(csdev);
CS_LOCK(drvdata->base); + + /* The perf event will release trace ids when it is destroyed */ + }
static void etm_disable_sysfs(struct coresight_device *csdev) @@ -635,6 +697,13 @@ static void etm_disable_sysfs(struct coresight_device *csdev) spin_unlock(&drvdata->spinlock); cpus_read_unlock();
+ /* + * we only release trace IDs when resetting sysfs. + * This permits sysfs users to read the trace ID after the trace + * session has completed. This maintains operational behaviour with + * prior trace id allocation method + */ + dev_dbg(&csdev->dev, "ETM tracing disabled\n"); }
@@ -781,11 +850,6 @@ static void etm_init_arch_data(void *info) CS_LOCK(drvdata->base); }
-static void etm_init_trace_id(struct etm_drvdata *drvdata) -{ - drvdata->traceid = coresight_get_trace_id(drvdata->cpu); -} - static int __init etm_hp_setup(void) { int ret; @@ -871,7 +935,6 @@ static int etm_probe(struct amba_device *adev, const struct amba_id *id) if (etm_arch_supported(drvdata->arch) == false) return -EINVAL;
- etm_init_trace_id(drvdata); etm_set_default(&drvdata->config);
pdata = coresight_get_platform_data(dev); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c index 68fcbf4ce7a8..fde028e43c92 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c @@ -85,6 +85,7 @@ static ssize_t reset_store(struct device *dev, }
etm_set_default(config); + etm_release_trace_id(drvdata); spin_unlock(&drvdata->spinlock); }
@@ -1189,30 +1190,16 @@ static DEVICE_ATTR_RO(cpu); static ssize_t traceid_show(struct device *dev, struct device_attribute *attr, char *buf) { - unsigned long val; - struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); - - val = etm_get_trace_id(drvdata); - - return sprintf(buf, "%#lx\n", val); -} - -static ssize_t traceid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int ret; - unsigned long val; + int trace_id; struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
- ret = kstrtoul(buf, 16, &val); - if (ret) - return ret; + trace_id = etm_read_alloc_trace_id(drvdata); + if (trace_id < 0) + return trace_id;
- drvdata->traceid = val & ETM_TRACEID_MASK; - return size; + return sysfs_emit(buf, "%#x\n", trace_id); } -static DEVICE_ATTR_RW(traceid); +static DEVICE_ATTR_RO(traceid);
static struct attribute *coresight_etm_attrs[] = { &dev_attr_nr_addr_cmp.attr,
CoreSight sources provide a callback (.trace_id) in the standard source ops which returns the ID to the core code. This was used to check that sources all had a unique Trace ID.
Uniqueness is now gauranteed by the Trace ID allocation system, and the check code has been removed from the core.
This patch removes the unneeded and unused .trace_id source ops from the ops structure and implementations in etm3x, etm4x and stm.
Signed-off-by: Mike Leach mike.leach@linaro.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com --- drivers/hwtracing/coresight/coresight-etm.h | 1 - .../coresight/coresight-etm3x-core.c | 37 ------------------- .../coresight/coresight-etm4x-core.c | 8 ---- drivers/hwtracing/coresight/coresight-stm.c | 8 ---- include/linux/coresight.h | 3 -- 5 files changed, 57 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 3667428d38b6..9a0d08b092ae 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -283,7 +283,6 @@ static inline unsigned int etm_readl(struct etm_drvdata *drvdata, u32 off) }
extern const struct attribute_group *coresight_etm_groups[]; -int etm_get_trace_id(struct etm_drvdata *drvdata); void etm_set_default(struct etm_config *config); void etm_config_trace_mode(struct etm_config *config); struct etm_config *get_etm_config(struct etm_drvdata *drvdata); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index c4e7b3337a5c..181a95cb6cf8 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -455,42 +455,6 @@ static int etm_cpu_id(struct coresight_device *csdev) return drvdata->cpu; }
-int etm_get_trace_id(struct etm_drvdata *drvdata) -{ - unsigned long flags; - int trace_id = -1; - struct device *etm_dev; - - if (!drvdata) - goto out; - - etm_dev = drvdata->csdev->dev.parent; - if (!local_read(&drvdata->mode)) - return drvdata->traceid; - - pm_runtime_get_sync(etm_dev); - - spin_lock_irqsave(&drvdata->spinlock, flags); - - CS_UNLOCK(drvdata->base); - trace_id = (etm_readl(drvdata, ETMTRACEIDR) & ETM_TRACEID_MASK); - CS_LOCK(drvdata->base); - - spin_unlock_irqrestore(&drvdata->spinlock, flags); - pm_runtime_put(etm_dev); - -out: - return trace_id; - -} - -static int etm_trace_id(struct coresight_device *csdev) -{ - struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - - return etm_get_trace_id(drvdata); -} - int etm_read_alloc_trace_id(struct etm_drvdata *drvdata) { int trace_id; @@ -740,7 +704,6 @@ static void etm_disable(struct coresight_device *csdev,
static const struct coresight_ops_source etm_source_ops = { .cpu_id = etm_cpu_id, - .trace_id = etm_trace_id, .enable = etm_enable, .disable = etm_disable, }; diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index b4fb28ce89fd..0648dea4053f 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -228,13 +228,6 @@ static int etm4_cpu_id(struct coresight_device *csdev) return drvdata->cpu; }
-static int etm4_trace_id(struct coresight_device *csdev) -{ - struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - - return drvdata->trcid; -} - int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata) { int trace_id; @@ -1026,7 +1019,6 @@ static void etm4_disable(struct coresight_device *csdev,
static const struct coresight_ops_source etm4_source_ops = { .cpu_id = etm4_cpu_id, - .trace_id = etm4_trace_id, .enable = etm4_enable, .disable = etm4_disable, }; diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index 9ef3e923a930..f4b4232614b0 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -281,15 +281,7 @@ static void stm_disable(struct coresight_device *csdev, } }
-static int stm_trace_id(struct coresight_device *csdev) -{ - struct stm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - - return drvdata->traceid; -} - static const struct coresight_ops_source stm_source_ops = { - .trace_id = stm_trace_id, .enable = stm_enable, .disable = stm_disable, }; diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 9f445f09fcfe..247147c11231 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -314,14 +314,11 @@ struct coresight_ops_link { * Operations available for sources. * @cpu_id: returns the value of the CPU number this component * is associated to. - * @trace_id: returns the value of the component's trace ID as known - * to the HW. * @enable: enables tracing for a source. * @disable: disables tracing for a source. */ struct coresight_ops_source { int (*cpu_id)(struct coresight_device *csdev); - int (*trace_id)(struct coresight_device *csdev); int (*enable)(struct coresight_device *csdev, struct perf_event *event, u32 mode); void (*disable)(struct coresight_device *csdev,
Adds in notifier calls to the trace ID allocator that perf events are starting and stopping.
This ensures that Trace IDs associated with CPUs remain the same throughout the perf session, and are only released when all perf sessions are complete.
Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/coresight-etm-perf.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 43bbd5dc3d3b..6166f716a6ac 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -22,6 +22,7 @@ #include "coresight-etm-perf.h" #include "coresight-priv.h" #include "coresight-syscfg.h" +#include "coresight-trace-id.h"
static struct pmu etm_pmu; static bool etm_perf_up; @@ -228,8 +229,12 @@ static void free_event_data(struct work_struct *work) if (!(IS_ERR_OR_NULL(*ppath))) coresight_release_path(*ppath); *ppath = NULL; + coresight_trace_id_put_cpu_id(cpu); }
+ /* mark perf event as done for trace id allocator */ + coresight_trace_id_perf_stop(); + free_percpu(event_data->path); kfree(event_data); } @@ -300,6 +305,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, { u32 id, cfg_hash; int cpu = event->cpu; + int trace_id; cpumask_t *mask; struct coresight_device *sink = NULL; struct coresight_device *user_sink = NULL, *last_sink = NULL; @@ -316,6 +322,9 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, sink = user_sink = coresight_get_sink_by_id(id); }
+ /* tell the trace ID allocator that a perf event is starting up */ + coresight_trace_id_perf_start(); + /* check if user wants a coresight configuration selected */ cfg_hash = (u32)((event->attr.config2 & GENMASK_ULL(63, 32)) >> 32); if (cfg_hash) { @@ -388,6 +397,13 @@ static void *etm_setup_aux(struct perf_event *event, void **pages, continue; }
+ /* ensure we can allocate a trace ID for this CPU */ + trace_id = coresight_trace_id_get_cpu_id(cpu); + if (!IS_VALID_ID(trace_id)) { + cpumask_clear_cpu(cpu, mask); + continue; + } + *etm_event_cpu_path_ptr(event_data, cpu) = path; }
The information to associate Trace ID and CPU will be changing.
Drivers will start outputting this as a hardware ID packet in the data file which if present will be used in preference to the AUXINFO values.
To prepare for this we provide a helper functions to do the individual ID mapping, and one to extract the IDs from the completed metadata blocks.
Signed-off-by: Mike Leach mike.leach@linaro.org --- tools/include/linux/coresight-pmu.h | 5 ++ tools/perf/util/cs-etm.c | 92 +++++++++++++++++++---------- tools/perf/util/cs-etm.h | 14 ++++- 3 files changed, 77 insertions(+), 34 deletions(-)
diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h index 6c2fd6cc5a98..db9c7c0abb6a 100644 --- a/tools/include/linux/coresight-pmu.h +++ b/tools/include/linux/coresight-pmu.h @@ -7,9 +7,14 @@ #ifndef _LINUX_CORESIGHT_PMU_H #define _LINUX_CORESIGHT_PMU_H
+#include <linux/bits.h> + #define CORESIGHT_ETM_PMU_NAME "cs_etm" #define CORESIGHT_ETM_PMU_SEED 0x10
+/* CoreSight trace ID is currently the bottom 7 bits of the value */ +#define CORESIGHT_TRACE_ID_VAL_MASK GENMASK(6, 0) + /* * Below are the definition of bit offsets for perf option, and works as * arbitrary values for all ETM versions. diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 8b95fb3c4d7b..48aaa2843ee2 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -193,6 +193,30 @@ int cs_etm__get_pid_fmt(u8 trace_chan_id, u64 *pid_fmt) return 0; }
+static int cs_etm__map_trace_id(u8 trace_chan_id, u64 *cpu_metadata) +{ + struct int_node *inode; + + /* Get an RB node for this CPU */ + inode = intlist__findnew(traceid_list, trace_chan_id); + + /* Something went wrong, no need to continue */ + if (!inode) + return -ENOMEM; + + /* + * The node for that CPU should not be taken. + * Back out if that's the case. + */ + if (inode->priv) + return -EINVAL; + + /* All good, associate the traceID with the metadata pointer */ + inode->priv = cpu_metadata; + + return 0; +} + void cs_etm__etmq_set_traceid_queue_timestamp(struct cs_etm_queue *etmq, u8 trace_chan_id) { @@ -2881,18 +2905,47 @@ static int cs_etm__queue_aux_records(struct perf_session *session) return 0; }
+/* map trace ids to correct metadata block, from information in metadata */ +static int cs_etm__map_trace_ids_metadata(int num_cpu, u64 **metadata) +{ + u64 cs_etm_magic; + u8 trace_chan_id; + int i, err; + + for (i = 0; i < num_cpu; i++) { + cs_etm_magic = metadata[i][CS_ETM_MAGIC]; + switch (cs_etm_magic) { + case __perf_cs_etmv3_magic: + trace_chan_id = (u8)((metadata[i][CS_ETM_ETMTRACEIDR]) & + CORESIGHT_TRACE_ID_VAL_MASK); + break; + case __perf_cs_etmv4_magic: + case __perf_cs_ete_magic: + trace_chan_id = (u8)((metadata[i][CS_ETMV4_TRCTRACEIDR]) & + CORESIGHT_TRACE_ID_VAL_MASK); + break; + default: + /* unknown magic number */ + return -EINVAL; + } + err = cs_etm__map_trace_id(trace_chan_id, metadata[i]); + if (err) + return err; + } + return 0; +} + int cs_etm__process_auxtrace_info(union perf_event *event, struct perf_session *session) { struct perf_record_auxtrace_info *auxtrace_info = &event->auxtrace_info; struct cs_etm_auxtrace *etm = NULL; - struct int_node *inode; unsigned int pmu_type; int event_header_size = sizeof(struct perf_event_header); int info_header_size; int total_size = auxtrace_info->header.size; int priv_size = 0; - int num_cpu, trcidr_idx; + int num_cpu; int err = 0; int i, j; u64 *ptr, *hdr = NULL; @@ -2962,23 +3015,13 @@ int cs_etm__process_auxtrace_info(union perf_event *event, cs_etm__create_meta_blk(ptr, &i, CS_ETM_PRIV_MAX, CS_ETM_NR_TRC_PARAMS_V0); - - /* The traceID is our handle */ - trcidr_idx = CS_ETM_ETMTRACEIDR; - } else if (ptr[i] == __perf_cs_etmv4_magic) { metadata[j] = cs_etm__create_meta_blk(ptr, &i, CS_ETMV4_PRIV_MAX, CS_ETMV4_NR_TRC_PARAMS_V0); - - /* The traceID is our handle */ - trcidr_idx = CS_ETMV4_TRCTRACEIDR; } else if (ptr[i] == __perf_cs_ete_magic) { metadata[j] = cs_etm__create_meta_blk(ptr, &i, CS_ETE_PRIV_MAX, -1); - - /* ETE shares first part of metadata with ETMv4 */ - trcidr_idx = CS_ETMV4_TRCTRACEIDR; } else { ui__error("CS ETM Trace: Unrecognised magic number %#"PRIx64". File could be from a newer version of perf.\n", ptr[i]); @@ -2990,26 +3033,6 @@ int cs_etm__process_auxtrace_info(union perf_event *event, err = -ENOMEM; goto err_free_metadata; } - - /* Get an RB node for this CPU */ - inode = intlist__findnew(traceid_list, metadata[j][trcidr_idx]); - - /* Something went wrong, no need to continue */ - if (!inode) { - err = -ENOMEM; - goto err_free_metadata; - } - - /* - * The node for that CPU should not be taken. - * Back out if that's the case. - */ - if (inode->priv) { - err = -EINVAL; - goto err_free_metadata; - } - /* All good, associate the traceID with the metadata pointer */ - inode->priv = metadata[j]; }
/* @@ -3090,6 +3113,11 @@ int cs_etm__process_auxtrace_info(union perf_event *event, if (err) goto err_delete_thread;
+ /* before aux records are queued, need to map metadata to trace IDs */ + err = cs_etm__map_trace_ids_metadata(num_cpu, metadata); + if (err) + goto err_delete_thread; + err = cs_etm__queue_aux_records(session); if (err) goto err_delete_thread; diff --git a/tools/perf/util/cs-etm.h b/tools/perf/util/cs-etm.h index 90c83f932d9a..712a6f855f0e 100644 --- a/tools/perf/util/cs-etm.h +++ b/tools/perf/util/cs-etm.h @@ -28,13 +28,17 @@ enum { /* * Update the version for new format. * - * New version 1 format adds a param count to the per cpu metadata. + * Version 1: format adds a param count to the per cpu metadata. * This allows easy adding of new metadata parameters. * Requires that new params always added after current ones. * Also allows client reader to handle file versions that are different by * checking the number of params in the file vs the number expected. + * + * Version 2: Drivers will use PERF_RECORD_AUX_OUTPUT_HW_ID to output + * CoreSight Trace ID. ...TRACEIDR metadata will be set to unused ID. */ -#define CS_HEADER_CURRENT_VERSION 1 +#define CS_HEADER_CURRENT_VERSION 2 +#define CS_AUX_HW_ID_VERSION_MIN 2
/* Beginning of header common to both ETMv3 and V4 */ enum { @@ -85,6 +89,12 @@ enum { CS_ETE_PRIV_MAX };
+/* + * Check for valid CoreSight trace ID. If an invalid value is present in the metadata, + * then IDs are present in the hardware ID packet in the data file. + */ +#define CS_IS_VALID_TRACE_ID(id) ((id > 0) && (id < 0x70)) + /* * ETMv3 exception encoding number: * See Embedded Trace Macrocell specification (ARM IHI 0014Q)
Trace IDs are now dynamically allocated.
Previously used the static association algorithm that is no longer used. The 'cpu * 2 + seed' was outdated and broken for systems with high core counts (>46). as it did not scale and was broken for larger core counts.
Trace ID will now be sent in PERF_RECORD_AUX_OUTPUT_HW_ID record.
Legacy ID algorithm renamed and retained for limited backward compatibility use.
Signed-off-by: Mike Leach mike.leach@linaro.org --- tools/include/linux/coresight-pmu.h | 30 +++++++++++++++++------------ tools/perf/arch/arm/util/cs-etm.c | 21 ++++++++++++-------- 2 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h index db9c7c0abb6a..307f357defe9 100644 --- a/tools/include/linux/coresight-pmu.h +++ b/tools/include/linux/coresight-pmu.h @@ -10,11 +10,28 @@ #include <linux/bits.h>
#define CORESIGHT_ETM_PMU_NAME "cs_etm" -#define CORESIGHT_ETM_PMU_SEED 0x10 + +/* + * The legacy Trace ID system based on fixed calculation from the cpu + * number. This has been replaced by drivers using a dynamic allocation + * system - but need to retain the legacy algorithm for backward comparibility + * in certain situations:- + * a) new perf running on older systems that generate the legacy mapping + * b) older tools e.g. simpleperf in Android, that may not update at the same + * time as the kernel. + */ +#define CORESIGHT_LEGACY_CPU_TRACE_ID(cpu) (0x10 + (cpu * 2))
/* CoreSight trace ID is currently the bottom 7 bits of the value */ #define CORESIGHT_TRACE_ID_VAL_MASK GENMASK(6, 0)
+/* + * perf record will set the legacy meta data values as unused initially. + * This allows perf report to manage the decoders created when dynamic + * allocation in operation. + */ +#define CORESIGHT_TRACE_ID_UNUSED_FLAG BIT(31) + /* * Below are the definition of bit offsets for perf option, and works as * arbitrary values for all ETM versions. @@ -39,15 +56,4 @@ #define ETM4_CFG_BIT_RETSTK 12 #define ETM4_CFG_BIT_VMID_OPT 15
-static inline int coresight_get_trace_id(int cpu) -{ - /* - * A trace ID of value 0 is invalid, so let's start at some - * random value that fits in 7 bits and go from there. Since - * the common convention is to have data trace IDs be I(N) + 1, - * set instruction trace IDs as a function of the CPU number. - */ - return (CORESIGHT_ETM_PMU_SEED + (cpu * 2)); -} - #endif diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c index 1b54638d53b0..196fe1a77de9 100644 --- a/tools/perf/arch/arm/util/cs-etm.c +++ b/tools/perf/arch/arm/util/cs-etm.c @@ -421,13 +421,16 @@ static int cs_etm_recording_options(struct auxtrace_record *itr, evlist__to_front(evlist, cs_etm_evsel);
/* - * In the case of per-cpu mmaps, we need the CPU on the - * AUX event. We also need the contextID in order to be notified + * get the CPU on the sample - need it to associate trace ID in the + * AUX_OUTPUT_HW_ID event, and the AUX event for per-cpu mmaps. + */ + evsel__set_sample_bit(cs_etm_evsel, CPU); + + /* + * Also the case of per-cpu mmaps, need the contextID in order to be notified * when a context switch happened. */ if (!perf_cpu_map__empty(cpus)) { - evsel__set_sample_bit(cs_etm_evsel, CPU); - err = cs_etm_set_option(itr, cs_etm_evsel, BIT(ETM_OPT_CTXTID) | BIT(ETM_OPT_TS)); if (err) @@ -633,8 +636,10 @@ static void cs_etm_save_etmv4_header(__u64 data[], struct auxtrace_record *itr,
/* Get trace configuration register */ data[CS_ETMV4_TRCCONFIGR] = cs_etmv4_get_config(itr); - /* Get traceID from the framework */ - data[CS_ETMV4_TRCTRACEIDR] = coresight_get_trace_id(cpu); + /* traceID set to legacy version, in case new perf running on older system */ + data[CS_ETMV4_TRCTRACEIDR] = + CORESIGHT_LEGACY_CPU_TRACE_ID(cpu) | CORESIGHT_TRACE_ID_UNUSED_FLAG; + /* Get read-only information from sysFS */ data[CS_ETMV4_TRCIDR0] = cs_etm_get_ro(cs_etm_pmu, cpu, metadata_etmv4_ro[CS_ETMV4_TRCIDR0]); @@ -681,9 +686,9 @@ static void cs_etm_get_metadata(int cpu, u32 *offset, magic = __perf_cs_etmv3_magic; /* Get configuration register */ info->priv[*offset + CS_ETM_ETMCR] = cs_etm_get_config(itr); - /* Get traceID from the framework */ + /* traceID set to legacy value in case new perf running on old system */ info->priv[*offset + CS_ETM_ETMTRACEIDR] = - coresight_get_trace_id(cpu); + CORESIGHT_LEGACY_CPU_TRACE_ID(cpu) | CORESIGHT_TRACE_ID_UNUSED_FLAG; /* Get read-only information from sysFS */ info->priv[*offset + CS_ETM_ETMCCER] = cs_etm_get_ro(cs_etm_pmu, cpu,
CoreSight trace being updated to use the perf_report_aux_output_id() in a similar way to intel-pt.
This function in needs export visibility to allow it to be called from kernel loadable modules, which CoreSight may configured to be built as.
Signed-off-by: Mike Leach mike.leach@linaro.org Acked-by: Suzuki K Poulose suzuki.poulose@arm.com --- kernel/events/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/kernel/events/core.c b/kernel/events/core.c index 80782cddb1da..f5835e5833cd 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -9117,6 +9117,7 @@ void perf_report_aux_output_id(struct perf_event *event, u64 hw_id)
perf_output_end(&handle); } +EXPORT_SYMBOL_GPL(perf_report_aux_output_id);
static int __perf_event_account_interrupt(struct perf_event *event, int throttle)
When using dynamically assigned CoreSight trace IDs the drivers can output the ID / CPU association as a PERF_RECORD_AUX_OUTPUT_HW_ID packet.
Update cs-etm decoder to handle this packet by setting the CPU/Trace ID mapping.
Signed-off-by: Mike Leach mike.leach@linaro.org --- tools/include/linux/coresight-pmu.h | 15 ++ .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 + tools/perf/util/cs-etm.c | 251 ++++++++++++++++-- 3 files changed, 257 insertions(+), 16 deletions(-)
diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h index 307f357defe9..57ba1abf1224 100644 --- a/tools/include/linux/coresight-pmu.h +++ b/tools/include/linux/coresight-pmu.h @@ -32,6 +32,9 @@ */ #define CORESIGHT_TRACE_ID_UNUSED_FLAG BIT(31)
+/* Value to set for unused trace ID values */ +#define CORESIGHT_TRACE_ID_UNUSED_VAL 0x7F + /* * Below are the definition of bit offsets for perf option, and works as * arbitrary values for all ETM versions. @@ -56,4 +59,16 @@ #define ETM4_CFG_BIT_RETSTK 12 #define ETM4_CFG_BIT_VMID_OPT 15
+/* + * Interpretation of the PERF_RECORD_AUX_OUTPUT_HW_ID payload. + * Used to associate a CPU with the CoreSight Trace ID. + * [07:00] - Trace ID - uses 8 bits to make value easy to read in file. + * [59:08] - Unused (SBZ) + * [63:60] - Version + */ +#define CS_AUX_HW_ID_TRACE_ID_MASK GENMASK_ULL(7, 0) +#define CS_AUX_HW_ID_VERSION_MASK GENMASK_ULL(63, 60) + +#define CS_AUX_HW_ID_CURR_VERSION 0 + #endif diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index 31fa3b45134a..fa3aa9c0fb2e 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -625,6 +625,7 @@ cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params, switch (t_params->protocol) { case CS_ETM_PROTO_ETMV3: case CS_ETM_PROTO_PTM: + csid = (t_params->etmv3.reg_idr & CORESIGHT_TRACE_ID_VAL_MASK); cs_etm_decoder__gen_etmv3_config(t_params, &config_etmv3); decoder->decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ? OCSD_BUILTIN_DCD_ETMV3 : @@ -632,11 +633,13 @@ cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params, trace_config = &config_etmv3; break; case CS_ETM_PROTO_ETMV4i: + csid = (t_params->etmv4.reg_traceidr & CORESIGHT_TRACE_ID_VAL_MASK); cs_etm_decoder__gen_etmv4_config(t_params, &trace_config_etmv4); decoder->decoder_name = OCSD_BUILTIN_DCD_ETMV4I; trace_config = &trace_config_etmv4; break; case CS_ETM_PROTO_ETE: + csid = (t_params->ete.reg_traceidr & CORESIGHT_TRACE_ID_VAL_MASK); cs_etm_decoder__gen_ete_config(t_params, &trace_config_ete); decoder->decoder_name = OCSD_BUILTIN_DCD_ETE; trace_config = &trace_config_ete; @@ -645,6 +648,10 @@ cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params, return -1; }
+ /* if the CPU has no trace ID associated, no decoder needed */ + if (csid == CORESIGHT_TRACE_ID_UNUSED_VAL) + return 0; + if (d_params->operation == CS_ETM_OPERATION_DECODE) { if (ocsd_dt_create_decoder(decoder->dcd_tree, decoder->decoder_name, diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 48aaa2843ee2..06adcee254aa 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -217,6 +217,143 @@ static int cs_etm__map_trace_id(u8 trace_chan_id, u64 *cpu_metadata) return 0; }
+static int cs_etm__metadata_get_trace_id(u8 *trace_chan_id, u64 *cpu_metadata) +{ + u64 cs_etm_magic = cpu_metadata[CS_ETM_MAGIC]; + + switch (cs_etm_magic) { + case __perf_cs_etmv3_magic: + *trace_chan_id = (u8)(cpu_metadata[CS_ETM_ETMTRACEIDR] & + CORESIGHT_TRACE_ID_VAL_MASK); + break; + case __perf_cs_etmv4_magic: + case __perf_cs_ete_magic: + *trace_chan_id = (u8)(cpu_metadata[CS_ETMV4_TRCTRACEIDR] & + CORESIGHT_TRACE_ID_VAL_MASK); + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * update metadata trace ID from the value found in the AUX_HW_INFO packet. + * This will also clear the CORESIGHT_TRACE_ID_UNUSED_FLAG flag if present. + */ +static int cs_etm__metadata_set_trace_id(u8 trace_chan_id, u64 *cpu_metadata) +{ + u64 cs_etm_magic = cpu_metadata[CS_ETM_MAGIC]; + + switch (cs_etm_magic) { + case __perf_cs_etmv3_magic: + cpu_metadata[CS_ETM_ETMTRACEIDR] = trace_chan_id; + break; + case __perf_cs_etmv4_magic: + case __perf_cs_ete_magic: + cpu_metadata[CS_ETMV4_TRCTRACEIDR] = trace_chan_id; + break; + + default: + return -EINVAL; + } + return 0; +} + +/* + * FIELD_GET (linux/bitfield.h) not available outside kernel code, + * and the header contains too many dependencies to just copy over, + * so roll our own based on the original + */ +#define __bf_shf(x) (__builtin_ffsll(x) - 1) +#define FIELD_GET(_mask, _reg) \ + ({ \ + (typeof(_mask))(((_reg) & (_mask)) >> __bf_shf(_mask)); \ + }) + +/* + * Handle the PERF_RECORD_AUX_OUTPUT_HW_ID event. + * + * The payload associates the Trace ID and the CPU. + * The routine is tolerant of seeing multiple packets with the same association, + * but a CPU / Trace ID association changing during a session is an error. + */ +static int cs_etm__process_aux_output_hw_id(struct perf_session *session, + union perf_event *event) +{ + struct cs_etm_auxtrace *etm; + struct perf_sample sample; + struct int_node *inode; + struct evsel *evsel; + u64 *cpu_data; + u64 hw_id; + int cpu, version, err; + u8 trace_chan_id, curr_chan_id; + + /* extract and parse the HW ID */ + hw_id = event->aux_output_hw_id.hw_id; + version = FIELD_GET(CS_AUX_HW_ID_VERSION_MASK, hw_id); + trace_chan_id = FIELD_GET(CS_AUX_HW_ID_TRACE_ID_MASK, hw_id); + + /* check that we can handle this version */ + if (version > CS_AUX_HW_ID_CURR_VERSION) + return -EINVAL; + + /* get access to the etm metadata */ + etm = container_of(session->auxtrace, struct cs_etm_auxtrace, auxtrace); + if (!etm || !etm->metadata) + return -EINVAL; + + /* parse the sample to get the CPU */ + evsel = evlist__event2evsel(session->evlist, event); + if (!evsel) + return -EINVAL; + err = evsel__parse_sample(evsel, event, &sample); + if (err) + return err; + cpu = sample.cpu; + if (cpu == -1) { + /* no CPU in the sample - possibly recorded with an old version of perf */ + pr_err("CS_ETM: no CPU AUX_OUTPUT_HW_ID sample. Use compatible perf to record."); + return -EINVAL; + } + + /* See if the ID is mapped to a CPU, and it matches the current CPU */ + inode = intlist__find(traceid_list, trace_chan_id); + if (inode) { + cpu_data = inode->priv; + if ((int)cpu_data[CS_ETM_CPU] != cpu) { + pr_err("CS_ETM: map mismatch between HW_ID packet CPU and Trace ID\n"); + return -EINVAL; + } + + /* check that the mapped ID matches */ + err = cs_etm__metadata_get_trace_id(&curr_chan_id, cpu_data); + if (err) + return err; + if (curr_chan_id != trace_chan_id) { + pr_err("CS_ETM: mismatch between CPU trace ID and HW_ID packet ID\n"); + return -EINVAL; + } + + /* mapped and matched - return OK */ + return 0; + } + + /* not one we've seen before - lets map it */ + cpu_data = etm->metadata[cpu]; + err = cs_etm__map_trace_id(trace_chan_id, cpu_data); + if (err) + return err; + + /* + * if we are picking up the association from the packet, need to plug + * the correct trace ID into the metadata for setting up decoders later. + */ + err = cs_etm__metadata_set_trace_id(trace_chan_id, cpu_data); + return err; +} + void cs_etm__etmq_set_traceid_queue_timestamp(struct cs_etm_queue *etmq, u8 trace_chan_id) { @@ -2662,7 +2799,7 @@ static void cs_etm__print_auxtrace_info(__u64 *val, int num) for (i = CS_HEADER_VERSION_MAX; cpu < num; cpu++) { if (version == 0) err = cs_etm__print_cpu_metadata_v0(val, &i); - else if (version == 1) + else if (version == 1 || version == 2) err = cs_etm__print_cpu_metadata_v1(val, &i); if (err) return; @@ -2774,11 +2911,16 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o }
/* - * In per-thread mode, CPU is set to -1, but TID will be set instead. See - * auxtrace_mmap_params__set_idx(). Return 'not found' if neither CPU nor TID match. + * In per-thread mode, auxtrace CPU is set to -1, but TID will be set instead. See + * auxtrace_mmap_params__set_idx(). However, the sample AUX event will contain a + * CPU as we set this always for the AUX_OUTPUT_HW_ID event. + * So now compare only TIDs if auxtrace CPU is -1, and CPUs if auxtrace CPU is not -1. + * Return 'not found' if mismatch. */ - if ((auxtrace_event->cpu == (__u32) -1 && auxtrace_event->tid != sample->tid) || - auxtrace_event->cpu != sample->cpu) + if (auxtrace_event->cpu == (__u32) -1) { + if (auxtrace_event->tid != sample->tid) + return 1; + } else if (auxtrace_event->cpu != sample->cpu) return 1;
if (aux_event->flags & PERF_AUX_FLAG_OVERWRITE) { @@ -2827,6 +2969,17 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o return 1; }
+static int cs_etm__process_aux_hw_id_cb(struct perf_session *session, union perf_event *event, + u64 offset __maybe_unused, void *data __maybe_unused) +{ + /* look to handle PERF_RECORD_AUX_OUTPUT_HW_ID early to ensure decoders can be set up */ + if (event->header.type == PERF_RECORD_AUX_OUTPUT_HW_ID) { + (*(int *)data)++; /* increment found count */ + return cs_etm__process_aux_output_hw_id(session, event); + } + return 0; +} + static int cs_etm__queue_aux_records_cb(struct perf_session *session, union perf_event *event, u64 offset __maybe_unused, void *data __maybe_unused) { @@ -2916,13 +3069,13 @@ static int cs_etm__map_trace_ids_metadata(int num_cpu, u64 **metadata) cs_etm_magic = metadata[i][CS_ETM_MAGIC]; switch (cs_etm_magic) { case __perf_cs_etmv3_magic: - trace_chan_id = (u8)((metadata[i][CS_ETM_ETMTRACEIDR]) & - CORESIGHT_TRACE_ID_VAL_MASK); + metadata[i][CS_ETM_ETMTRACEIDR] &= CORESIGHT_TRACE_ID_VAL_MASK; + trace_chan_id = (u8)(metadata[i][CS_ETM_ETMTRACEIDR]); break; case __perf_cs_etmv4_magic: case __perf_cs_ete_magic: - trace_chan_id = (u8)((metadata[i][CS_ETMV4_TRCTRACEIDR]) & - CORESIGHT_TRACE_ID_VAL_MASK); + metadata[i][CS_ETMV4_TRCTRACEIDR] &= CORESIGHT_TRACE_ID_VAL_MASK; + trace_chan_id = (u8)(metadata[i][CS_ETMV4_TRCTRACEIDR]); break; default: /* unknown magic number */ @@ -2935,6 +3088,35 @@ static int cs_etm__map_trace_ids_metadata(int num_cpu, u64 **metadata) return 0; }
+/* + * If we found AUX_HW_ID packets, then set any metadata marked as unused to the + * unused value to reduce the number of unneeded decoders created. + */ +static int cs_etm__clear_unused_trace_ids_metadata(int num_cpu, u64 **metadata) +{ + u64 cs_etm_magic; + int i; + + for (i = 0; i < num_cpu; i++) { + cs_etm_magic = metadata[i][CS_ETM_MAGIC]; + switch (cs_etm_magic) { + case __perf_cs_etmv3_magic: + if (metadata[i][CS_ETM_ETMTRACEIDR] & CORESIGHT_TRACE_ID_UNUSED_FLAG) + metadata[i][CS_ETM_ETMTRACEIDR] = CORESIGHT_TRACE_ID_UNUSED_VAL; + break; + case __perf_cs_etmv4_magic: + case __perf_cs_ete_magic: + if (metadata[i][CS_ETMV4_TRCTRACEIDR] & CORESIGHT_TRACE_ID_UNUSED_FLAG) + metadata[i][CS_ETMV4_TRCTRACEIDR] = CORESIGHT_TRACE_ID_UNUSED_VAL; + break; + default: + /* unknown magic number */ + return -EINVAL; + } + } + return 0; +} + int cs_etm__process_auxtrace_info(union perf_event *event, struct perf_session *session) { @@ -2947,6 +3129,7 @@ int cs_etm__process_auxtrace_info(union perf_event *event, int priv_size = 0; int num_cpu; int err = 0; + int aux_hw_id_found; int i, j; u64 *ptr, *hdr = NULL; u64 **metadata = NULL; @@ -3113,8 +3296,43 @@ int cs_etm__process_auxtrace_info(union perf_event *event, if (err) goto err_delete_thread;
- /* before aux records are queued, need to map metadata to trace IDs */ - err = cs_etm__map_trace_ids_metadata(num_cpu, metadata); + /* + * Map Trace ID values to CPU metadata. + * + * Trace metadata will always contain Trace ID values from the legacy algorithm. If the + * files has been recorded by a "new" perf updated to handle AUX_HW_ID then the metadata + * ID value will also have the CORESIGHT_TRACE_ID_UNUSED_FLAG set. + * + * The updated kernel drivers that use AUX_HW_ID to sent Trace IDs will attempt to use + * the same IDs as the old algorithm as far as is possible, unless there are clashes + * in which case a different value will be used. This means an older perf may still + * be able to record and read files generate on a newer system. + * + * For a perf able to interpret AUX_HW_ID packets we first check for the presence of + * those packets. If they are there then the values will be mapped and plugged into + * the metadata. We then set any remaining metadata values with the used flag to a + * value CORESIGHT_TRACE_ID_UNUSED_VAL - which indicates no decoder is required. + * + * If no AUX_HW_ID packets are present - which means a file recorded on an old kernel + * then we map Trace ID values to CPU directly from the metadata - clearing any unused + * flags if present. + */ + + /* first scan for AUX_OUTPUT_HW_ID records to map trace ID values to CPU metadata */ + aux_hw_id_found = 0; + err = perf_session__peek_events(session, session->header.data_offset, + session->header.data_size, + cs_etm__process_aux_hw_id_cb, &aux_hw_id_found); + if (err) + goto err_delete_thread; + + /* if HW ID found then clear any unused metadata ID values */ + if (aux_hw_id_found) + err = cs_etm__clear_unused_trace_ids_metadata(num_cpu, metadata); + /* otherwise, this is a file with metadata values only, map from metadata */ + else + err = cs_etm__map_trace_ids_metadata(num_cpu, metadata); + if (err) goto err_delete_thread;
@@ -3124,13 +3342,14 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
etm->data_queued = etm->queues.populated; /* - * Print warning in pipe mode, see cs_etm__process_auxtrace_event() and + * Print error in pipe mode, see cs_etm__process_auxtrace_event() and * cs_etm__queue_aux_fragment() for details relating to limitations. */ - if (!etm->data_queued) - pr_warning("CS ETM warning: Coresight decode and TRBE support requires random file access.\n" - "Continuing with best effort decoding in piped mode.\n\n"); - + if (!etm->data_queued) { + pr_err("CS ETM: Coresight decode and TRBE support need random file access.\n"); + err = -EINVAL; + goto err_delete_thread; + } return 0;
err_delete_thread:
Use the perf_report_aux_output_id() call to output the CoreSight trace ID and associated CPU as a PERF_RECORD_AUX_OUTPUT_HW_ID record in the perf.data file.
Signed-off-by: Mike Leach mike.leach@linaro.org --- drivers/hwtracing/coresight/coresight-etm-perf.c | 7 +++++++ include/linux/coresight-pmu.h | 14 ++++++++++++++ 2 files changed, 21 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 6166f716a6ac..59a2ad95c1dc 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -4,6 +4,7 @@ * Author: Mathieu Poirier mathieu.poirier@linaro.org */
+#include <linux/bitfield.h> #include <linux/coresight.h> #include <linux/coresight-pmu.h> #include <linux/cpumask.h> @@ -448,6 +449,7 @@ static void etm_event_start(struct perf_event *event, int flags) struct perf_output_handle *handle = &ctxt->handle; struct coresight_device *sink, *csdev = per_cpu(csdev_src, cpu); struct list_head *path; + u64 hw_id;
if (!csdev) goto fail; @@ -493,6 +495,11 @@ static void etm_event_start(struct perf_event *event, int flags) if (source_ops(csdev)->enable(csdev, event, CS_MODE_PERF)) goto fail_disable_path;
+ /* output cpu / trace ID in perf record */ + hw_id = FIELD_PREP(CS_AUX_HW_ID_VERSION_MASK, CS_AUX_HW_ID_CURR_VERSION) | + FIELD_PREP(CS_AUX_HW_ID_TRACE_ID_MASK, coresight_trace_id_read_cpu_id(cpu)); + perf_report_aux_output_id(event, hw_id); + out: /* Tell the perf core the event is alive */ event->hw.state = 0; diff --git a/include/linux/coresight-pmu.h b/include/linux/coresight-pmu.h index 99bc3cc6bf2d..9aafafff219a 100644 --- a/include/linux/coresight-pmu.h +++ b/include/linux/coresight-pmu.h @@ -7,6 +7,8 @@ #ifndef _LINUX_CORESIGHT_PMU_H #define _LINUX_CORESIGHT_PMU_H
+#include <linux/bits.h> + #define CORESIGHT_ETM_PMU_NAME "cs_etm"
/* @@ -44,4 +46,16 @@ #define ETM4_CFG_BIT_RETSTK 12 #define ETM4_CFG_BIT_VMID_OPT 15
+/* + * Interpretation of the PERF_RECORD_AUX_OUTPUT_HW_ID payload. + * Used to associate a CPU with the CoreSight Trace ID. + * [07:00] - Trace ID - uses 8 bits to make value easy to read in file. + * [59:08] - Unused (SBZ) + * [63:60] - Version + */ +#define CS_AUX_HW_ID_TRACE_ID_MASK GENMASK_ULL(7, 0) +#define CS_AUX_HW_ID_VERSION_MASK GENMASK_ULL(63, 60) + +#define CS_AUX_HW_ID_CURR_VERSION 0 + #endif
Adds in a number of pr_debug macros to allow the debugging and test of the trace ID allocation system.
Signed-off-by: Mike Leach mike.leach@linaro.org --- .../hwtracing/coresight/coresight-trace-id.c | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c index ac9092896dec..24c19ff493a9 100644 --- a/drivers/hwtracing/coresight/coresight-trace-id.c +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -69,6 +69,30 @@ static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_ma set_bit(id, id_map->pend_rel_ids); }
+/* #define TRACE_ID_DEBUG 1 */ +#ifdef TRACE_ID_DEBUG +static char page_buf[PAGE_SIZE]; + +static void coresight_trace_id_dump_table(struct coresight_trace_id_map *id_map, + const char *func_name) +{ + pr_debug("%s id_map::\n", func_name); + bitmap_print_to_pagebuf(0, page_buf, id_map->used_ids, CORESIGHT_TRACE_IDS_MAX); + pr_debug("Avial= %s\n", page_buf); + bitmap_print_to_pagebuf(0, page_buf, id_map->pend_rel_ids, CORESIGHT_TRACE_IDS_MAX); + pr_debug("Pend = %s\n", page_buf); +} +#define DUMP_ID_MAP(map) coresight_trace_id_dump_table(map, __func__) +#define DUMP_ID_CPU(cpu, id) pr_debug("%s called; cpu=%d, id=%d\n", __func__, cpu, id) +#define DUMP_ID(id) pr_debug("%s called; id=%d\n", __func__, id) +#define PERF_SESSION(n) pr_debug("%s perf count %d\n", __func__, n) +#else +#define DUMP_ID_MAP(map) +#define DUMP_ID(id) +#define DUMP_ID_CPU(cpu, id) +#define PERF_SESSION(n) +#endif + /* release all pending IDs for all current maps & clear CPU associations */ static void coresight_trace_id_release_all_pending(void) { @@ -88,6 +112,7 @@ static void coresight_trace_id_release_all_pending(void) } } spin_unlock_irqrestore(&id_map_lock, flags); + DUMP_ID_MAP(id_map); }
static int coresight_trace_id_map_get_cpu_id(int cpu, struct coresight_trace_id_map *id_map) @@ -123,6 +148,8 @@ static int coresight_trace_id_map_get_cpu_id(int cpu, struct coresight_trace_id_ get_cpu_id_out: spin_unlock_irqrestore(&id_map_lock, flags);
+ DUMP_ID_CPU(cpu, id); + DUMP_ID_MAP(id_map); return id; }
@@ -150,6 +177,8 @@ static void coresight_trace_id_map_put_cpu_id(int cpu, struct coresight_trace_id
spin_unlock_irqrestore(&id_map_lock, flags); put_cpu_id_out: + DUMP_ID_CPU(cpu, id); + DUMP_ID_MAP(id_map); }
static int coresight_trace_id_map_get_system_id(struct coresight_trace_id_map *id_map) @@ -161,6 +190,8 @@ static int coresight_trace_id_map_get_system_id(struct coresight_trace_id_map *i id = coresight_trace_id_alloc_new_id(id_map, 0); spin_unlock_irqrestore(&id_map_lock, flags);
+ DUMP_ID(id); + DUMP_ID_MAP(id_map); return id; }
@@ -171,6 +202,9 @@ static void coresight_trace_id_map_put_system_id(struct coresight_trace_id_map * spin_lock_irqsave(&id_map_lock, flags); coresight_trace_id_free(id, id_map); spin_unlock_irqrestore(&id_map_lock, flags); + + DUMP_ID(id); + DUMP_ID_MAP(id_map); }
/* API functions */ @@ -207,6 +241,7 @@ EXPORT_SYMBOL_GPL(coresight_trace_id_put_system_id); void coresight_trace_id_perf_start(void) { atomic_inc(&perf_cs_etm_session_active); + PERF_SESSION(atomic_read(&perf_cs_etm_session_active)); } EXPORT_SYMBOL_GPL(coresight_trace_id_perf_start);
@@ -214,6 +249,7 @@ void coresight_trace_id_perf_stop(void) { if (!atomic_dec_return(&perf_cs_etm_session_active)) coresight_trace_id_release_all_pending(); + PERF_SESSION(atomic_read(&perf_cs_etm_session_active)); } EXPORT_SYMBOL_GPL(coresight_trace_id_perf_stop);
On 09/08/2022 23:34, Mike Leach wrote:
Adds in a number of pr_debug macros to allow the debugging and test of the trace ID allocation system.
Signed-off-by: Mike Leach mike.leach@linaro.org
.../hwtracing/coresight/coresight-trace-id.c | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c index ac9092896dec..24c19ff493a9 100644 --- a/drivers/hwtracing/coresight/coresight-trace-id.c +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -69,6 +69,30 @@ static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_ma set_bit(id, id_map->pend_rel_ids); } +/* #define TRACE_ID_DEBUG 1 */ +#ifdef TRACE_ID_DEBUG +static char page_buf[PAGE_SIZE];
+static void coresight_trace_id_dump_table(struct coresight_trace_id_map *id_map,
const char *func_name)
+{
- pr_debug("%s id_map::\n", func_name);
- bitmap_print_to_pagebuf(0, page_buf, id_map->used_ids, CORESIGHT_TRACE_IDS_MAX);
- pr_debug("Avial= %s\n", page_buf);
Could we not use %pb directly and skip the bitmap_print_to_pagebuf ?
Suzuki
On Mon, 3 Oct 2022 at 12:06, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 09/08/2022 23:34, Mike Leach wrote:
Adds in a number of pr_debug macros to allow the debugging and test of the trace ID allocation system.
Signed-off-by: Mike Leach mike.leach@linaro.org
.../hwtracing/coresight/coresight-trace-id.c | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-trace-id.c b/drivers/hwtracing/coresight/coresight-trace-id.c index ac9092896dec..24c19ff493a9 100644 --- a/drivers/hwtracing/coresight/coresight-trace-id.c +++ b/drivers/hwtracing/coresight/coresight-trace-id.c @@ -69,6 +69,30 @@ static void coresight_trace_id_set_pend_rel(int id, struct coresight_trace_id_ma set_bit(id, id_map->pend_rel_ids); }
+/* #define TRACE_ID_DEBUG 1 */ +#ifdef TRACE_ID_DEBUG +static char page_buf[PAGE_SIZE];
+static void coresight_trace_id_dump_table(struct coresight_trace_id_map *id_map,
const char *func_name)
+{
pr_debug("%s id_map::\n", func_name);
bitmap_print_to_pagebuf(0, page_buf, id_map->used_ids, CORESIGHT_TRACE_IDS_MAX);
pr_debug("Avial= %s\n", page_buf);
Could we not use %pb directly and skip the bitmap_print_to_pagebuf ?
Suzuki
In short, yes!
Mike
Em Tue, Aug 09, 2022 at 11:33:48PM +0100, Mike Leach escreveu:
The current method for allocating trace source ID values to sources is to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10). The STM is allocated ID 0x1.
So I'll wait for the kernel bits to get into the ARM architecture tree to then process the userspace bits.
Would be great to have Tested-by/Reviewed-by from pehole actually testing these patches on the hardware where these features are available.
- Arnaldo
This fixed algorithm is used in both the CoreSight driver code, and by perf when writing the trace metadata in the AUXTRACE_INFO record.
The method needs replacing as currently:-
- It is inefficient in using available IDs.
- Does not scale to larger systems with many cores and the algorithm
has no limits so will generate invalid trace IDs for cpu number > 44.
Additionally requirements to allocate additional system IDs on some systems have been seen.
This patch set introduces an API that allows the allocation of trace IDs in a dynamic manner.
Architecturally reserved IDs are never allocated, and the system is limited to allocating only valid IDs.
Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use the new API.
For the ETMx.x devices IDs are allocated on certain events a) When using sysfs, an ID will be allocated on hardware enable, or a read of sysfs TRCTRACEID register and freed when the sysfs reset is written.
b) When using perf, ID is allocated on during setup AUX event, and freed on event free. IDs are communicated using the AUX_OUTPUT_HW_ID packet. The ID allocator is notified when perf sessions start and stop so CPU based IDs are kept constant throughout any perf session.
Note: This patchset breaks some backward compatibility for perf record and perf report.
The version of the AUXTRACE_INFO has been updated to reflect the fact that the trace source IDs are generated differently. This will mean older versions of perf report cannot decode the newer file.
Applies to coresight/next [4d45bc82df66] Tested on DB410c
Changes since v2:
- Improved backward compatibility: (requested by James)
Using the new version of perf on an old kernel will generate a usable file legacy metadata values are set by the new perf and will be used if mew ID packets are not present in the file.
Using an older version of perf / simpleperf on an updated kernel may still work. The trace ID allocator has been updated to use the legacy ID values where possible, so generated file and used trace IDs will match up to the point where the legacy algorithm is broken anyway.
- Various changes to the ID allocator and ID packet format.
(suggested by Suzuki)
- per CPU ID info in allocator now stored as atomic type to allow a passive read
without taking the allocator spinlock. perf flow now allocates and releases ID values in setup_aux / free_event. Device enable and event enable use the passive read to set the allocated values. This simplifies the locking mechanisms on the perf run and fixes issues that arose with locking dependencies.
Changes since v1: (after feedback & discussion with Mathieu & Suzuki).
- API has changed. The global trace ID map is managed internally, so it
is no longer passed in to the API functions.
- perf record does not use sysfs to find the trace IDs. These are now
output as AUX_OUTPUT_HW_ID events. The drivers, perf record, and perf report have been updated accordingly to generate and handle these events.
Mike Leach (13): coresight: trace-id: Add API to dynamically assign Trace ID values coresight: Remove obsolete Trace ID unniqueness checks coresight: stm: Update STM driver to use Trace ID API coresight: etm4x: Update ETM4 driver to use Trace ID API coresight: etm3x: Update ETM3 driver to use Trace ID API coresight: etmX.X: stm: Remove trace_id() callback coresight: perf: traceid: Add perf notifiers for Trace ID perf: cs-etm: Move mapping of Trace ID and cpu into helper function perf: cs-etm: Update record event to use new Trace ID protocol kernel: events: Export perf_report_aux_output_id() perf: cs-etm: Handle PERF_RECORD_AUX_OUTPUT_HW_ID packet coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID coresight: trace-id: Add debug & test macros to Trace ID allocation
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 49 +-- .../hwtracing/coresight/coresight-etm-perf.c | 23 ++ drivers/hwtracing/coresight/coresight-etm.h | 3 +- .../coresight/coresight-etm3x-core.c | 92 +++-- .../coresight/coresight-etm3x-sysfs.c | 27 +- .../coresight/coresight-etm4x-core.c | 79 ++++- .../coresight/coresight-etm4x-sysfs.c | 27 +- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + drivers/hwtracing/coresight/coresight-stm.c | 49 +-- .../hwtracing/coresight/coresight-trace-id.c | 266 ++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 +++++ include/linux/coresight-pmu.h | 35 +- include/linux/coresight.h | 3 - kernel/events/core.c | 1 + tools/include/linux/coresight-pmu.h | 48 ++- tools/perf/arch/arm/util/cs-etm.c | 21 +- .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 + tools/perf/util/cs-etm.c | 331 +++++++++++++++--- tools/perf/util/cs-etm.h | 14 +- 20 files changed, 933 insertions(+), 225 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
-- 2.17.1
Hi Arnaldo,
On Fri, 12 Aug 2022 at 20:50, Arnaldo Carvalho de Melo acme@kernel.org wrote:
Em Tue, Aug 09, 2022 at 11:33:48PM +0100, Mike Leach escreveu:
The current method for allocating trace source ID values to sources is to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10). The STM is allocated ID 0x1.
So I'll wait for the kernel bits to get into the ARM architecture tree to then process the userspace bits.
Would be great to have Tested-by/Reviewed-by from pehole actually testing these patches on the hardware where these features are available.
Agreed, although the issue is not hardware - this is a fix of a software issue that just happens to manifest on more modern hardware, though can be tested on anything.
That said, you should wait for v4 as the kernel test bot has picked something up that requires attention.
Thanks
Mike
- Arnaldo
This fixed algorithm is used in both the CoreSight driver code, and by perf when writing the trace metadata in the AUXTRACE_INFO record.
The method needs replacing as currently:-
- It is inefficient in using available IDs.
- Does not scale to larger systems with many cores and the algorithm
has no limits so will generate invalid trace IDs for cpu number > 44.
Additionally requirements to allocate additional system IDs on some systems have been seen.
This patch set introduces an API that allows the allocation of trace IDs in a dynamic manner.
Architecturally reserved IDs are never allocated, and the system is limited to allocating only valid IDs.
Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use the new API.
For the ETMx.x devices IDs are allocated on certain events a) When using sysfs, an ID will be allocated on hardware enable, or a read of sysfs TRCTRACEID register and freed when the sysfs reset is written.
b) When using perf, ID is allocated on during setup AUX event, and freed on event free. IDs are communicated using the AUX_OUTPUT_HW_ID packet. The ID allocator is notified when perf sessions start and stop so CPU based IDs are kept constant throughout any perf session.
Note: This patchset breaks some backward compatibility for perf record and perf report.
The version of the AUXTRACE_INFO has been updated to reflect the fact that the trace source IDs are generated differently. This will mean older versions of perf report cannot decode the newer file.
Applies to coresight/next [4d45bc82df66] Tested on DB410c
Changes since v2:
- Improved backward compatibility: (requested by James)
Using the new version of perf on an old kernel will generate a usable file legacy metadata values are set by the new perf and will be used if mew ID packets are not present in the file.
Using an older version of perf / simpleperf on an updated kernel may still work. The trace ID allocator has been updated to use the legacy ID values where possible, so generated file and used trace IDs will match up to the point where the legacy algorithm is broken anyway.
- Various changes to the ID allocator and ID packet format.
(suggested by Suzuki)
- per CPU ID info in allocator now stored as atomic type to allow a passive read
without taking the allocator spinlock. perf flow now allocates and releases ID values in setup_aux / free_event. Device enable and event enable use the passive read to set the allocated values. This simplifies the locking mechanisms on the perf run and fixes issues that arose with locking dependencies.
Changes since v1: (after feedback & discussion with Mathieu & Suzuki).
- API has changed. The global trace ID map is managed internally, so it
is no longer passed in to the API functions.
- perf record does not use sysfs to find the trace IDs. These are now
output as AUX_OUTPUT_HW_ID events. The drivers, perf record, and perf report have been updated accordingly to generate and handle these events.
Mike Leach (13): coresight: trace-id: Add API to dynamically assign Trace ID values coresight: Remove obsolete Trace ID unniqueness checks coresight: stm: Update STM driver to use Trace ID API coresight: etm4x: Update ETM4 driver to use Trace ID API coresight: etm3x: Update ETM3 driver to use Trace ID API coresight: etmX.X: stm: Remove trace_id() callback coresight: perf: traceid: Add perf notifiers for Trace ID perf: cs-etm: Move mapping of Trace ID and cpu into helper function perf: cs-etm: Update record event to use new Trace ID protocol kernel: events: Export perf_report_aux_output_id() perf: cs-etm: Handle PERF_RECORD_AUX_OUTPUT_HW_ID packet coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID coresight: trace-id: Add debug & test macros to Trace ID allocation
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 49 +-- .../hwtracing/coresight/coresight-etm-perf.c | 23 ++ drivers/hwtracing/coresight/coresight-etm.h | 3 +- .../coresight/coresight-etm3x-core.c | 92 +++-- .../coresight/coresight-etm3x-sysfs.c | 27 +- .../coresight/coresight-etm4x-core.c | 79 ++++- .../coresight/coresight-etm4x-sysfs.c | 27 +- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + drivers/hwtracing/coresight/coresight-stm.c | 49 +-- .../hwtracing/coresight/coresight-trace-id.c | 266 ++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 78 +++++ include/linux/coresight-pmu.h | 35 +- include/linux/coresight.h | 3 - kernel/events/core.c | 1 + tools/include/linux/coresight-pmu.h | 48 ++- tools/perf/arch/arm/util/cs-etm.c | 21 +- .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 7 + tools/perf/util/cs-etm.c | 331 +++++++++++++++--- tools/perf/util/cs-etm.h | 14 +- 20 files changed, 933 insertions(+), 225 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h
-- 2.17.1
--
- Arnaldo