Linaro-mm-sig May 2014

linaro-mm-sig@lists.linaro.org

11 participants
11 discussions

Re: [Linaro-mm-sig] [RFC] dma-buf: Implement test module

by Thierry Reding

On Tue, Mar 25, 2014 at 07:01:10PM +0100, Sam Ravnborg wrote: > > > > There are two things that don't work too well with this. First this > > causes the build to break if the build machine doesn't have the new > > public header (include/uapi/linux/dma-buf.h) installed yet. So the only > > way to make this work would be by building the kernel once with SAMPLES > > disabled, install the headers and then build again with SAMPLES enabled. > > Which really isn't very nice. > > > > One other option that I've tried is to modify the include path so that > > the test program would get the in-tree copy of the public header file, > > but that didn't build properly either because the header files aren't > > properly sanitized and therefore the compiler complains about it > > (include/uapi/linux/types.h). > > > > One other disadvantage of carrying the sample program in the tree is > > that there's only infrastructure to build programs natively on the build > > machine. That's somewhat unfortunate because if you want to run the test > > program on a different architecture you have to either compile the > > kernel natively on that architecture (which isn't very practical on many > > embedded devices) or cross-compile manually. > > > > I think a much nicer solution would be to add infrastructure to cross- > > compile these test programs, so that they end up being built for the > > same architecture as the kernel image (i.e. using CROSS_COMPILE). > > > > Adding Michal and the linux-kbuild mailing list, perhaps this has been > > discussed before, or maybe somebody has a better idea on how to solve > > this. > I actually looked into this some time ago. > May try to dust off the patch. > IIRC the kernel provided headers were used for building - not the one installed on the machine. > And crosscompile were supported. That sounds exactly like what I'd want for this. If you need any help, please let me know. Thanks, Thierry

10 years, 5 months

[PATCH v4 00/11] Add DRM for stih4xx platforms

by Benjamin Gaignard

This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. version 4: - Remove depency between TVout it subdevices HDMI and HDA - Rework and simplify VTG and VTAC code - Fix numbers of typo and indentation - Remove debug (will be push in separate patches) - Fix remarks done in previous patcheset patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v4 version 3: - Correctly split code between probe and bind funtions - Squash some commits - remove HQ-VDP device code to have a smaller patcheset, we will introduce it later. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v3 version 2: - Use componentized device instead of register sub-devices in master driver probe function - Fix Makefile and Kconfig to only allow built-in compilation patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v2 version 1: - First path submission Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. Benjamin Gaignard (11): drm: sti: add bindings for DRM driver drm: sti: add VTG driver drm: sti: add VTAC drivers drm: sti: add HDMI driver drm: sti: add HDA driver drm: sti: add TVOut driver drm: sti: add GDP layer drm: sti: add VID layer drm: sti: add Mixer drm: sti: add Compositor drm: sti: Add DRM driver itself .../devicetree/bindings/gpu/st,stih4xx.txt | 189 ++++++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sti/Kconfig | 14 + drivers/gpu/drm/sti/Makefile | 19 + drivers/gpu/drm/sti/sti_compositor.c | 265 ++++++++ drivers/gpu/drm/sti/sti_compositor.h | 90 +++ drivers/gpu/drm/sti/sti_drm_connector.c | 114 ++++ drivers/gpu/drm/sti/sti_drm_connector.h | 55 ++ drivers/gpu/drm/sti/sti_drm_crtc.c | 436 ++++++++++++ drivers/gpu/drm/sti/sti_drm_crtc.h | 21 + drivers/gpu/drm/sti/sti_drm_drv.c | 229 +++++++ drivers/gpu/drm/sti/sti_drm_drv.h | 35 + drivers/gpu/drm/sti/sti_drm_encoder.c | 108 +++ drivers/gpu/drm/sti/sti_drm_encoder.h | 17 + drivers/gpu/drm/sti/sti_drm_plane.c | 192 ++++++ drivers/gpu/drm/sti/sti_drm_plane.h | 17 + drivers/gpu/drm/sti/sti_gdp.c | 512 ++++++++++++++ drivers/gpu/drm/sti/sti_gdp.h | 73 ++ drivers/gpu/drm/sti/sti_hda.c | 727 ++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.c | 748 +++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.h | 88 +++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 +++++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 + drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 + drivers/gpu/drm/sti/sti_layer.c | 312 +++++++++ drivers/gpu/drm/sti/sti_layer.h | 114 ++++ drivers/gpu/drm/sti/sti_mixer.c | 249 +++++++ drivers/gpu/drm/sti/sti_mixer.h | 52 ++ drivers/gpu/drm/sti/sti_tvout.c | 687 +++++++++++++++++++ drivers/gpu/drm/sti/sti_tvout.h | 18 + drivers/gpu/drm/sti/sti_vid.c | 145 ++++ drivers/gpu/drm/sti/sti_vid.h | 33 + drivers/gpu/drm/sti/sti_vtac.c | 211 ++++++ drivers/gpu/drm/sti/sti_vtg.c | 356 ++++++++++ drivers/gpu/drm/sti/sti_vtg.h | 28 + 37 files changed, 6732 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt create mode 100644 drivers/gpu/drm/sti/Kconfig create mode 100644 drivers/gpu/drm/sti/Makefile create mode 100644 drivers/gpu/drm/sti/sti_compositor.c create mode 100644 drivers/gpu/drm/sti/sti_compositor.h create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.c create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.h create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.c create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.h create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h create mode 100644 drivers/gpu/drm/sti/sti_gdp.c create mode 100644 drivers/gpu/drm/sti/sti_gdp.h create mode 100644 drivers/gpu/drm/sti/sti_hda.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h create mode 100644 drivers/gpu/drm/sti/sti_layer.c create mode 100644 drivers/gpu/drm/sti/sti_layer.h create mode 100644 drivers/gpu/drm/sti/sti_mixer.c create mode 100644 drivers/gpu/drm/sti/sti_mixer.h create mode 100644 drivers/gpu/drm/sti/sti_tvout.c create mode 100644 drivers/gpu/drm/sti/sti_tvout.h create mode 100644 drivers/gpu/drm/sti/sti_vid.c create mode 100644 drivers/gpu/drm/sti/sti_vid.h create mode 100644 drivers/gpu/drm/sti/sti_vtac.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.h -- 1.9.1

10 years, 6 months

[PATCH v3 00/16] Add DRM for stih4xx platforms

by Benjamin Gaignard

This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. patcheset version 3: - Correctly split code between probe and bind funtions - Squash some commits - remove HQ-VDP device code to have a smaller patcheset, we will introduce it later. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v3 patcheset version 2: - Use componentized device instead of register sub-devices in master driver probe function - Fix Makefile and Kconfig to only allow built-in compilation patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v2 patcheset version 1: - First path submission Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. Benjamin Gaignard (16): drm: sti: add VTG driver drm: sti: add VTAC drivers drm: sti: add HDMI driver drm: sti: add I2C client driver for HDMI drm: sti: add HDA driver drm: sti: add TVOut driver drm: sti: add sti layer interface definition drm: sti: add GDP layer drm: sti: add VID layer drm: sti: add Mixer drm: sti: add Compositor drm: sti: add debug to GDP drm: sti: add debug to VID drm: sti: add debug to TVout drm: sti: add debug to mixer drm: sti: Add DRM driver itself drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sti/Kconfig | 26 + drivers/gpu/drm/sti/Makefile | 22 + drivers/gpu/drm/sti/sti_compositor.c | 267 +++++++ drivers/gpu/drm/sti/sti_compositor.h | 84 +++ drivers/gpu/drm/sti/sti_ddc.c | 56 ++ drivers/gpu/drm/sti/sti_drm_connector.c | 195 +++++ drivers/gpu/drm/sti/sti_drm_connector.h | 16 + drivers/gpu/drm/sti/sti_drm_crtc.c | 440 ++++++++++++ drivers/gpu/drm/sti/sti_drm_crtc.h | 21 + drivers/gpu/drm/sti/sti_drm_drv.c | 338 +++++++++ drivers/gpu/drm/sti/sti_drm_drv.h | 36 + drivers/gpu/drm/sti/sti_drm_encoder.c | 201 ++++++ drivers/gpu/drm/sti/sti_drm_encoder.h | 16 + drivers/gpu/drm/sti/sti_drm_plane.c | 195 +++++ drivers/gpu/drm/sti/sti_drm_plane.h | 16 + drivers/gpu/drm/sti/sti_gdp.c | 726 +++++++++++++++++++ drivers/gpu/drm/sti/sti_gdp.h | 75 ++ drivers/gpu/drm/sti/sti_hda.c | 852 ++++++++++++++++++++++ drivers/gpu/drm/sti/sti_hda.h | 14 + drivers/gpu/drm/sti/sti_hdmi.c | 1071 ++++++++++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.h | 198 +++++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 398 +++++++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 224 ++++++ drivers/gpu/drm/sti/sti_layer.c | 309 ++++++++ drivers/gpu/drm/sti/sti_layer.h | 113 +++ drivers/gpu/drm/sti/sti_mixer.c | 405 +++++++++++ drivers/gpu/drm/sti/sti_mixer.h | 54 ++ drivers/gpu/drm/sti/sti_tvout.c | 904 +++++++++++++++++++++++ drivers/gpu/drm/sti/sti_tvout.h | 105 +++ drivers/gpu/drm/sti/sti_vid.c | 259 +++++++ drivers/gpu/drm/sti/sti_vid.h | 34 + drivers/gpu/drm/sti/sti_vtac_rx.c | 169 +++++ drivers/gpu/drm/sti/sti_vtac_tx.c | 182 +++++ drivers/gpu/drm/sti/sti_vtac_utils.h | 52 ++ drivers/gpu/drm/sti/sti_vtg.c | 468 ++++++++++++ drivers/gpu/drm/sti/sti_vtg.h | 20 + drivers/gpu/drm/sti/sti_vtg_utils.c | 99 +++ drivers/gpu/drm/sti/sti_vtg_utils.h | 29 + 40 files changed, 8692 insertions(+) create mode 100644 drivers/gpu/drm/sti/Kconfig create mode 100644 drivers/gpu/drm/sti/Makefile create mode 100644 drivers/gpu/drm/sti/sti_compositor.c create mode 100644 drivers/gpu/drm/sti/sti_compositor.h create mode 100644 drivers/gpu/drm/sti/sti_ddc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.c create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.h create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.c create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.h create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h create mode 100644 drivers/gpu/drm/sti/sti_gdp.c create mode 100644 drivers/gpu/drm/sti/sti_gdp.h create mode 100644 drivers/gpu/drm/sti/sti_hda.c create mode 100644 drivers/gpu/drm/sti/sti_hda.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c create mode 100644 drivers/gpu/drm/sti/sti_layer.c create mode 100644 drivers/gpu/drm/sti/sti_layer.h create mode 100644 drivers/gpu/drm/sti/sti_mixer.c create mode 100644 drivers/gpu/drm/sti/sti_mixer.h create mode 100644 drivers/gpu/drm/sti/sti_tvout.c create mode 100644 drivers/gpu/drm/sti/sti_tvout.h create mode 100644 drivers/gpu/drm/sti/sti_vid.c create mode 100644 drivers/gpu/drm/sti/sti_vid.h create mode 100644 drivers/gpu/drm/sti/sti_vtac_rx.c create mode 100644 drivers/gpu/drm/sti/sti_vtac_tx.c create mode 100644 drivers/gpu/drm/sti/sti_vtac_utils.h create mode 100644 drivers/gpu/drm/sti/sti_vtg.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.h create mode 100644 drivers/gpu/drm/sti/sti_vtg_utils.c create mode 100644 drivers/gpu/drm/sti/sti_vtg_utils.h -- 1.9.1

10 years, 7 months

[PATCH 0/2] Updates to fence api

by Maarten Lankhorst

The following series implements small updates to the fence api. I've found them useful when implementing the fence API in ttm and i915. The last patch enables RCU on top of the api. I've found this less useful, but it was the condition on which Thomas Hellstrom was ok with converting TTM to fence, so I had to keep it in. If nobody objects I'll probably merge that patch through drm, because some care is needed in ttm before it can flip the switch on rcu. --- Maarten Lankhorst (2): reservation: update api and add some helpers [RFC] reservation: add suppport for read-only access using rcu

10 years, 7 months

[PATCH 0/6] dma-buf synchronization patches (updated)

by Maarten Lankhorst

The following series implements fence and converts dma-buf and android sync to use it. Patch 5 and 6 add support for polling to dma-buf, blocking until all fences are signaled. Patches that received some minor updates: - seqno fence (wait condition member added) - android (whitespace changes and a comment removed) - add poll support to dma-buf (added comment) --- Maarten Lankhorst (6): fence: dma-buf cross-device synchronization (v17) seqno-fence: Hardware dma-buf implementation of fencing (v5) dma-buf: use reservation objects android: convert sync to fence api, v5 reservation: add support for fences to enable cross-device synchronisation dma-buf: add poll support, v3 Documentation/DocBook/device-drivers.tmpl | 3 drivers/base/Kconfig | 9 drivers/base/Makefile | 2 drivers/base/dma-buf.c | 130 +++ drivers/base/fence.c | 467 ++++++++++++ drivers/gpu/drm/drm_prime.c | 8 drivers/gpu/drm/exynos/exynos_drm_dmabuf.c | 2 drivers/gpu/drm/i915/i915_gem_dmabuf.c | 2 drivers/gpu/drm/nouveau/nouveau_drm.c | 1 drivers/gpu/drm/nouveau/nouveau_gem.h | 1 drivers/gpu/drm/nouveau/nouveau_prime.c | 7 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 2 drivers/gpu/drm/radeon/radeon_drv.c | 2 drivers/gpu/drm/radeon/radeon_prime.c | 8 drivers/gpu/drm/ttm/ttm_object.c | 2 drivers/media/v4l2-core/videobuf2-dma-contig.c | 2 drivers/staging/android/Kconfig | 1 drivers/staging/android/Makefile | 2 drivers/staging/android/ion/ion.c | 2 drivers/staging/android/sw_sync.c | 4 drivers/staging/android/sync.c | 903 ++++++++---------------- drivers/staging/android/sync.h | 82 +- drivers/staging/android/sync_debug.c | 247 +++++++ drivers/staging/android/trace/sync.h | 12 include/drm/drmP.h | 2 include/linux/dma-buf.h | 21 - include/linux/fence.h | 329 +++++++++ include/linux/reservation.h | 20 + include/linux/seqno-fence.h | 119 +++ include/trace/events/fence.h | 125 +++ 30 files changed, 1863 insertions(+), 654 deletions(-) create mode 100644 drivers/base/fence.c create mode 100644 drivers/staging/android/sync_debug.c create mode 100644 include/linux/fence.h create mode 100644 include/linux/seqno-fence.h create mode 100644 include/trace/events/fence.h -- Signature

10 years, 7 months

Re: [Linaro-mm-sig] [PATCH v6 05/11] drivers: of: add automated assignment of reserved regions to client devices

by Grant Likely

On Wed, 14 May 2014 10:15:38 +0100, "Jon Medhurst (Tixy)" <tixy(a)linaro.org> wrote: > On Sun, 2014-03-02 at 13:40 +0800, Grant Likely wrote: > > On Fri, 28 Feb 2014 14:42:50 +0100, Marek Szyprowski <m.szyprowski(a)samsung.com> wrote: > > > This patch adds code for automated assignment of reserved memory regions > > > to struct device. reserved_mem->ops->device_init()/device_cleanup() > > > callbacks are called to perform reserved memory driver specific > > > initialization and cleanup > > > > > > Based on previous code provided by Josh Cartwright <joshc(a)codeaurora.org> > > > > > > Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> > > > > Hi Marek, > > > > I've not applied this one yet, only because there is still the open > > issue of whether or not these functions should be called from drivers or > > from core code. I don't actually have any problems with the content of > > this patch. Once the user is sorted out I'll merge it. > > Has anything more come of these patches? I see some of the series is now > in Linux 3.15, but the actual patches to let people use the feature > aren't there yet, namely patches 5 though 8. > > My personal immediate interest in these is as a mechanism on arm64 to > limit CMA to a region of memory that is actually DMA-able devices (e.g. > below 4GB for 32-bit devices without an iommu). > > For reference, the mail archives for this series is at > http://lkml.org/lkml/2014/2/28/237 IIRC, the issue I have with patch 5-8 is that I don't like the driver core going off and doing automagical things to attach regions to devices. I've not seen any more discussion on this topic since I merged the patches I was okay with, but I may have missed something. g.

10 years, 7 months

[PATCH v2 00/19] Add DRM for stih4xx platforms

by Benjamin Gaignard

This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. patcheset version 2: - Use componentized device instead of register sub-devices in master driver probe function - Fix Makefile and Kconfig to only allow built-in compilation patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v2 patcheset version 1: - First path submission Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. Benjamin Gaignard (18): drm: sti: add bindings for DRM driver drm: sti: add VTG driver drm: sti: add VTAC drivers drm: sti: add HDMI driver drm: sti: add I2C client driver for HDMI drm: sti: add HDA driver drm: sti: add TVOut driver drm: sti: add sti layer interface definition drm: sti: add GDP layer drm: sti: add VID layer drm: sti: add Mixer drm: sti: add Compositor drm: sti: add debug to GDP drm: sti: add debug to VID drm: sti: add debug to TVout drm: sti: add debug to mixer drm: sti: Add DRM driver itself drm: sti: add HQVDP driver Vincent Abriou (1): drm: sti: rename mixer registers to be main/aux independent .../devicetree/bindings/gpu/st,stih4xx.txt | 187 ++++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sti/Kconfig | 26 + drivers/gpu/drm/sti/Makefile | 23 + drivers/gpu/drm/sti/sti_compositor.c | 222 ++++ drivers/gpu/drm/sti/sti_compositor.h | 84 ++ drivers/gpu/drm/sti/sti_ddc.c | 56 + drivers/gpu/drm/sti/sti_drm_connector.c | 195 ++++ drivers/gpu/drm/sti/sti_drm_connector.h | 16 + drivers/gpu/drm/sti/sti_drm_crtc.c | 440 ++++++++ drivers/gpu/drm/sti/sti_drm_crtc.h | 21 + drivers/gpu/drm/sti/sti_drm_drv.c | 447 ++++++++ drivers/gpu/drm/sti/sti_drm_drv.h | 39 + drivers/gpu/drm/sti/sti_drm_encoder.c | 201 ++++ drivers/gpu/drm/sti/sti_drm_encoder.h | 16 + drivers/gpu/drm/sti/sti_drm_plane.c | 195 ++++ drivers/gpu/drm/sti/sti_drm_plane.h | 16 + drivers/gpu/drm/sti/sti_gdp.c | 726 +++++++++++++ drivers/gpu/drm/sti/sti_gdp.h | 75 ++ drivers/gpu/drm/sti/sti_hda.c | 853 +++++++++++++++ drivers/gpu/drm/sti/sti_hda.h | 14 + drivers/gpu/drm/sti/sti_hdmi.c | 1072 +++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.h | 198 ++++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 398 +++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 224 ++++ drivers/gpu/drm/sti/sti_hqvdp.c | 1107 ++++++++++++++++++++ drivers/gpu/drm/sti/sti_hqvdp.h | 55 + drivers/gpu/drm/sti/sti_hqvdp_lut.h | 373 +++++++ drivers/gpu/drm/sti/sti_layer.c | 324 ++++++ drivers/gpu/drm/sti/sti_layer.h | 116 ++ drivers/gpu/drm/sti/sti_mixer.c | 405 +++++++ drivers/gpu/drm/sti/sti_mixer.h | 54 + drivers/gpu/drm/sti/sti_tvout.c | 884 ++++++++++++++++ drivers/gpu/drm/sti/sti_tvout.h | 105 ++ drivers/gpu/drm/sti/sti_vid.c | 259 +++++ drivers/gpu/drm/sti/sti_vid.h | 34 + drivers/gpu/drm/sti/sti_vtac_rx.c | 167 +++ drivers/gpu/drm/sti/sti_vtac_tx.c | 182 ++++ drivers/gpu/drm/sti/sti_vtac_utils.h | 52 + drivers/gpu/drm/sti/sti_vtg.c | 467 +++++++++ drivers/gpu/drm/sti/sti_vtg.h | 20 + drivers/gpu/drm/sti/sti_vtg_utils.c | 99 ++ drivers/gpu/drm/sti/sti_vtg_utils.h | 29 + 44 files changed, 10479 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt create mode 100644 drivers/gpu/drm/sti/Kconfig create mode 100644 drivers/gpu/drm/sti/Makefile create mode 100644 drivers/gpu/drm/sti/sti_compositor.c create mode 100644 drivers/gpu/drm/sti/sti_compositor.h create mode 100644 drivers/gpu/drm/sti/sti_ddc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.c create mode 100644 drivers/gpu/drm/sti/sti_drm_connector.h create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.c create mode 100644 drivers/gpu/drm/sti/sti_drm_encoder.h create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h create mode 100644 drivers/gpu/drm/sti/sti_gdp.c create mode 100644 drivers/gpu/drm/sti/sti_gdp.h create mode 100644 drivers/gpu/drm/sti/sti_hda.c create mode 100644 drivers/gpu/drm/sti/sti_hda.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c create mode 100644 drivers/gpu/drm/sti/sti_hqvdp.c create mode 100644 drivers/gpu/drm/sti/sti_hqvdp.h create mode 100644 drivers/gpu/drm/sti/sti_hqvdp_lut.h create mode 100644 drivers/gpu/drm/sti/sti_layer.c create mode 100644 drivers/gpu/drm/sti/sti_layer.h create mode 100644 drivers/gpu/drm/sti/sti_mixer.c create mode 100644 drivers/gpu/drm/sti/sti_mixer.h create mode 100644 drivers/gpu/drm/sti/sti_tvout.c create mode 100644 drivers/gpu/drm/sti/sti_tvout.h create mode 100644 drivers/gpu/drm/sti/sti_vid.c create mode 100644 drivers/gpu/drm/sti/sti_vid.h create mode 100644 drivers/gpu/drm/sti/sti_vtac_rx.c create mode 100644 drivers/gpu/drm/sti/sti_vtac_tx.c create mode 100644 drivers/gpu/drm/sti/sti_vtac_utils.h create mode 100644 drivers/gpu/drm/sti/sti_vtg.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.h create mode 100644 drivers/gpu/drm/sti/sti_vtg_utils.c create mode 100644 drivers/gpu/drm/sti/sti_vtg_utils.h -- 1.9.1

10 years, 7 months

Re: [Linaro-mm-sig] Questions regarding DMA buffer sharing using IOMMU

by Laura Abbott

On 5/12/2014 7:37 AM, Pintu Kumar wrote: > Hi, > Thanks for the reply. > > ---------------------------------------- >> From: arnd(a)arndb.de >> To: linux-arm-kernel(a)lists.infradead.org >> CC: pintu.k(a)outlook.com; linux-mm(a)kvack.org; linux-kernel(a)vger.kernel.org; linaro-mm-sig(a)lists.linaro.org >> Subject: Re: Questions regarding DMA buffer sharing using IOMMU >> Date: Mon, 12 May 2014 14:00:57 +0200 >> >> On Monday 12 May 2014 15:12:41 Pintu Kumar wrote: >>> Hi, >>> I have some queries regarding IOMMU and CMA buffer sharing. >>> We have an embedded linux device (kernel 3.10, RAM: 256Mb) in >>> which camera and codec supports IOMMU but the display does not support IOMMU. >>> Thus for camera capture we are using iommu buffers using >>> ION/DMABUF. But for all display rendering we are using CMA buffers. >>> So, the question is how to achieve buffer sharing (zero-copy) >>> between Camera and Display using only IOMMU? >>> Currently we are achieving zero-copy using CMA. And we are >>> exploring options to use IOMMU. >>> Now we wanted to know which option is better? To use IOMMU or CMA? >>> If anybody have come across these design please share your thoughts and results. >> >> There is a slight performance overhead in using the IOMMU in general, >> because the IOMMU has to fetch the page table entries from memory >> at least some of the time. > > Ok, we need to check performance later > >> >> If that overhead is within the constraints you have for transfers between >> camera and codec, you are always better off using IOMMU since that >> means you don't have to do memory migration. > > Transfer between camera is codec is fine. But our major concern is single buffer > sharing between camera & display. Here camera supports iommu but display does not support iommu. > Is it possible to render camera preview (iommu buffers) on display (not iommu and required physical contiguous overlay memory)? > I'm pretty sure the answer is no for zero copy IOMMU buffers if one of your devices does not support IOMMU. If the data is coming in as individual pages and the hardware does not support scattered pages there isn't much you can do except copy to a contiguous buffer. At least with Ion, the heap types can be set up in a particular way such that the client need never know about the existence of an IOMMU or not. > Also is it possible to buffer sharing between 2 iommu supported devices? > I don't see why not but there isn't a lot of information to go on here. Thanks, Laura -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

10 years, 7 months

Re: [Linaro-mm-sig] Questions regarding DMA buffer sharing using IOMMU

by Arnd Bergmann

On Monday 12 May 2014 15:12:41 Pintu Kumar wrote: > Hi, > I have some queries regarding IOMMU and CMA buffer sharing. > We have an embedded linux device (kernel 3.10, RAM: 256Mb) in > which camera and codec supports IOMMU but the display does not support IOMMU. > Thus for camera capture we are using iommu buffers using > ION/DMABUF. But for all display rendering we are using CMA buffers. > So, the question is how to achieve buffer sharing (zero-copy) > between Camera and Display using only IOMMU? > Currently we are achieving zero-copy using CMA. And we are > exploring options to use IOMMU. > Now we wanted to know which option is better? To use IOMMU or CMA? > If anybody have come across these design please share your thoughts and results. There is a slight performance overhead in using the IOMMU in general, because the IOMMU has to fetch the page table entries from memory at least some of the time. If that overhead is within the constraints you have for transfers between camera and codec, you are always better off using IOMMU since that means you don't have to do memory migration. Note however, that we don't have a way to describe IOMMU relations to devices in DT, so whatever you come up with to do this will most likely be incompatible with what we do in future kernel versions. Arnd

10 years, 7 months

[PATCH] cma: increase CMA_ALIGNMENT upper limit to 12

by Marc Carino

Certain platforms contain peripherals which have contiguous memory alignment requirements, necessitating the use of the alignment argument when obtaining CMA memory. The current default maximum CMA_ALIGNMENT of order 9 translates into a 1MB alignment on systems with a 4K page size. To accommodate systems with peripherals with even larger alignment requirements, increase the upper-bound of CMA_ALIGNMENT from order 9 to order 12. Marc Carino (1): cma: increase CMA_ALIGNMENT upper limit to 12 drivers/base/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 1.9.1

10 years, 7 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig May 2014