STI hardware have various input sub-devices before mixing block. Each type of sub-device have different capabilities for scaling, filtering or accepted pixel format. This layer interface abstract those differences and make the interaction with compositor more simple.
Signed-off-by: Benjamin Gaignard benjamin.gaignard@linaro.org --- drivers/gpu/drm/sti/sti_layer.h | 104 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 drivers/gpu/drm/sti/sti_layer.h
diff --git a/drivers/gpu/drm/sti/sti_layer.h b/drivers/gpu/drm/sti/sti_layer.h new file mode 100644 index 0000000..ed8386a --- /dev/null +++ b/drivers/gpu/drm/sti/sti_layer.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) STMicroelectronics SA 2013 + * Authors: Benjamin Gaignard benjamin.gaignard@st.com + * Fabien Dessenne fabien.dessenne@st.com + * for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _STI_LAYER_H_ +#define _STI_LAYER_H_ + +#include <drm/drmP.h> + +#define to_sti_layer(x) container_of(x, struct sti_layer, plane) + +#define STI_LAYER_TYPE_SHIFT 8 +#define STI_LAYER_TYPE_MASK (~((1<<STI_LAYER_TYPE_SHIFT)-1)) + + +enum sti_layer_type { + STI_GDP = 1 << STI_LAYER_TYPE_SHIFT, + STI_VID = 2 << STI_LAYER_TYPE_SHIFT, + STI_CUR = 3 << STI_LAYER_TYPE_SHIFT, + STI_BCK = 4 << STI_LAYER_TYPE_SHIFT +}; + +enum sti_layer_id_of_type { + STI_ID_0 = 0, + STI_ID_1 = 1, + STI_ID_2 = 2, + STI_ID_3 = 3 +}; + +enum sti_layer_desc { + STI_GDP_0 = STI_GDP | STI_ID_0, + STI_GDP_1 = STI_GDP | STI_ID_1, + STI_GDP_2 = STI_GDP | STI_ID_2, + STI_GDP_3 = STI_GDP | STI_ID_3, + STI_VID_0 = STI_VID | STI_ID_0, + STI_VID_1 = STI_VID | STI_ID_1, + STI_CURSOR = STI_CUR, + STI_BACK = STI_BCK +}; + +struct sti_fps_info { + bool output; + int curr_frame_counter; + int last_frame_counter; + struct timespec last_timestamp; +}; + +/* + * STI layer structure + * + * @plane: drm plane it is bound to (if any) + * @fb: drm fb it is bound to + * @mode: display mode + * @desc: layer type & id + * @zorder: layer z-order + * @enabled: to know if the layer is active or not + * @src_x src_y: coordinates of the input (fb) area + * @src_w src_h: size of the input (fb) area + * @dst_x dst_y: coordinates of the output (crtc) area + * @dst_w dst_h: size of the output (crtc) area + * @format: format + * @pitches: pitch of 'planes' (eg: Y, U, V) + * @offsets: offset of 'planes' + * @paddr: physical address of the input buffer + * @fps_info: frame per second info + */ +struct sti_layer { + struct drm_plane plane; + struct drm_framebuffer *fb; + struct drm_display_mode *mode; + enum sti_layer_desc desc; + int zorder; + bool enabled; + int src_x, src_y; + int src_w, src_h; + int dst_x, dst_y; + int dst_w, dst_h; + uint32_t format; + int pitches[4]; + int offsets[4]; + dma_addr_t paddr; + struct sti_fps_info fps_info; +}; + +struct sti_layer *sti_layer_create(struct device *dev, int desc, + void __iomem *baseaddr); +int sti_layer_prepare(struct sti_layer *layer, struct drm_framebuffer *fb, + struct drm_display_mode *mode, + int dest_x, int dest_y, + int dest_w, int dest_h, + int src_x, int src_y, + int src_w, int src_h); +int sti_layer_commit(struct sti_layer *layer); +int sti_layer_disable(struct sti_layer *layer); +const uint32_t *sti_layer_get_formats(struct sti_layer *layer); +int sti_layer_get_nb_formats(struct sti_layer *layer); +struct sti_layer *sti_layer_find_layer(struct sti_layer *layer[], + enum sti_layer_desc desc); +const char *sti_layer_to_str(struct sti_layer *layer); +#endif