[Linaro-mm-sig] Re: [PATCH v2 02/16] slab: Introduce kmalloc_size_roundup()

On 9/23/22 22:28, Kees Cook wrote:

In the effort to help the compiler reason about buffer sizes, the __alloc_size attribute was added to allocators. This improves the scope of the compiler's ability to apply CONFIG_UBSAN_BOUNDS and (in the near future) CONFIG_FORTIFY_SOURCE. For most allocations, this works well, as the vast majority of callers are not expecting to use more memory than what they asked for.

There is, however, one common exception to this: anticipatory resizing of kmalloc allocations. These cases all use ksize() to determine the actual bucket size of a given allocation (e.g. 128 when 126 was asked for). This comes in two styles in the kernel:

1. An allocation has been determined to be too small, and needs to be resized. Instead of the caller choosing its own next best size, it wants to minimize the number of calls to krealloc(), so it just uses ksize() plus some additional bytes, forcing the realloc into the next bucket size, from which it can learn how large it is now. For example:

   data = krealloc(data, ksize(data) + 1, gfp); data_len = ksize(data);

2. The minimum size of an allocation is calculated, but since it may grow in the future, just use all the space available in the chosen bucket immediately, to avoid needing to reallocate later. A good example of this is skbuff's allocators:

   data = kmalloc_reserve(size, gfp_mask, node, &pfmemalloc); ... /* kmalloc(size) might give us more room than requested.

   • Put skb_shared_info exactly at the end of allocated zone,
   • to allow max possible filling before reallocation.

   */ osize = ksize(data); size = SKB_WITH_OVERHEAD(osize);

In both cases, the "how much was actually allocated?" question is answered _after_ the allocation, where the compiler hinting is not in an easy place to make the association any more. This mismatch between the compiler's view of the buffer length and the code's intention about how much it is going to actually use has already caused problems[1]. It is possible to fix this by reordering the use of the "actual size" information.

We can serve the needs of users of ksize() and still have accurate buffer length hinting for the compiler by doing the bucket size calculation _before_ the allocation. Code can instead ask "how large an allocation would I get for a given size?".

Introduce kmalloc_size_roundup(), to serve this function so we can start replacing the "anticipatory resizing" uses of ksize().

[1] https://github.com/ClangBuiltLinux/linux/issues/1599 https://github.com/KSPP/linux/issues/183

Cc: Vlastimil Babka vbabka@suse.cz Cc: Christoph Lameter cl@linux.com Cc: Pekka Enberg penberg@kernel.org Cc: David Rientjes rientjes@google.com Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Cc: Andrew Morton akpm@linux-foundation.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook keescook@chromium.org

OK, added patch 1+2 to slab.git for-next branch. Had to adjust this one a bit, see below.

---

include/linux/slab.h | 31 +++++++++++++++++++++++++++++++ mm/slab.c | 9 ++++++--- mm/slab_common.c | 20 ++++++++++++++++++++ 3 files changed, 57 insertions(+), 3 deletions(-)

diff --git a/include/linux/slab.h b/include/linux/slab.h index 41bd036e7551..727640173568 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -188,7 +188,21 @@ void * __must_check krealloc(const void *objp, size_t new_size, gfp_t flags) __r void kfree(const void *objp); void kfree_sensitive(const void *objp); size_t __ksize(const void *objp);

+/**

• • ksize - Report actual allocation size of associated object
• • @objp: Pointer returned from a prior kmalloc()-family allocation.
• • This should not be used for writing beyond the originally requested
• • allocation size. Either use krealloc() or round up the allocation size
• • with kmalloc_size_roundup() prior to allocation. If this is used to
• • access beyond the originally requested allocation size, UBSAN_BOUNDS
• • and/or FORTIFY_SOURCE may trip, since they only know about the
• • originally allocated size via the __alloc_size attribute.
• */ size_t ksize(const void *objp);
• #ifdef CONFIG_PRINTK bool kmem_valid_obj(void *object); void kmem_dump_obj(void *object);

@@ -779,6 +793,23 @@ extern void kvfree(const void *addr); extern void kvfree_sensitive(const void *addr, size_t len); unsigned int kmem_cache_size(struct kmem_cache *s);

+/**

• • kmalloc_size_roundup - Report allocation bucket size for the given size
• • @size: Number of bytes to round up from.
• • This returns the number of bytes that would be available in a kmalloc()
• • allocation of @size bytes. For example, a 126 byte request would be
• • rounded up to the next sized kmalloc bucket, 128 bytes. (This is strictly
• • for the general-purpose kmalloc()-based allocations, and is not for the
• • pre-sized kmem_cache_alloc()-based allocations.)
• • Use this to kmalloc() the full bucket size ahead of time instead of using
• • ksize() to query the size after an allocation.
• */

+size_t kmalloc_size_roundup(size_t size);

• void __init kmem_cache_init_late(void);

#if defined(CONFIG_SMP) && defined(CONFIG_SLAB) diff --git a/mm/slab.c b/mm/slab.c index 10e96137b44f..2da862bf6226 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -4192,11 +4192,14 @@ void __check_heap_object(const void *ptr, unsigned long n, #endif /* CONFIG_HARDENED_USERCOPY */ /**

• • __ksize -- Uninstrumented ksize.

• • __ksize -- Report full size of underlying allocation
  • @objp: pointer to the object

• • Unlike ksize(), __ksize() is uninstrumented, and does not provide the same
• • safety checks as ksize() with KASAN instrumentation enabled.

• • This should only be used internally to query the true size of allocations.
• • It is not meant to be a way to discover the usable size of an allocation
• • after the fact. Instead, use kmalloc_size_roundup(). Using memory beyond
• • the originally requested allocation size may trigger KASAN, UBSAN_BOUNDS,
• • and/or FORTIFY_SOURCE.
  • Return: size of the actual memory used by @objp in bytes
  */

diff --git a/mm/slab_common.c b/mm/slab_common.c index 457671ace7eb..d7420cf649f8 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -721,6 +721,26 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags) return kmalloc_caches[kmalloc_type(flags)][index]; } +size_t kmalloc_size_roundup(size_t size) +{

• struct kmem_cache *c;
• /* Short-circuit the 0 size case. */
• if (unlikely(size == 0))

• return 0;
  

• /* Short-circuit saturated "too-large" case. */
• if (unlikely(size == SIZE_MAX))

• return SIZE_MAX;
  

• /* Above the smaller buckets, size is a multiple of page size. */
• if (size > KMALLOC_MAX_CACHE_SIZE)

• return PAGE_SIZE << get_order(size);
  

• /* The flags don't matter since size_index is common to all. */
• c = kmalloc_slab(size, GFP_KERNEL);
• return c ? c->object_size : 0;

+} +EXPORT_SYMBOL(kmalloc_size_roundup);

We need a SLOB version too as it's not yet removed... I added this:

diff --git a/mm/slob.c b/mm/slob.c index 2bd4f476c340..5dbdf6ad8bcc 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -574,6 +574,20 @@ void kfree(const void *block) } EXPORT_SYMBOL(kfree);

+size_t kmalloc_size_roundup(size_t size) +{ + /* Short-circuit the 0 size case. */ + if (unlikely(size == 0)) + return 0; + /* Short-circuit saturated "too-large" case. */ + if (unlikely(size == SIZE_MAX)) + return SIZE_MAX; + + return ALIGN(size, ARCH_KMALLOC_MINALIGN); +} + +EXPORT_SYMBOL(kmalloc_size_roundup); + /* can't use ksize for kmem_cache_alloc memory, only kmalloc */ size_t __ksize(const void *block) {