This adds support for OTP area access on MX30LFxG18AC chip series.
Changelog: v1 -> v2: * Add slab.h include due to kernel test robot error. v2 -> v3: * Use 'uint64_t' as input argument for 'do_div()' instead of 'unsigned long' due to kernel test robot error.
Signed-off-by: Arseniy Krasnov AVKrasnov@sberdevices.ru --- drivers/mtd/nand/raw/nand_macronix.c | 213 +++++++++++++++++++++++++++ 1 file changed, 213 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c index 1472f925f386..2301f990678e 100644 --- a/drivers/mtd/nand/raw/nand_macronix.c +++ b/drivers/mtd/nand/raw/nand_macronix.c @@ -6,6 +6,7 @@ * Author: Boris Brezillon boris.brezillon@free-electrons.com */
+#include <linux/slab.h> #include "linux/delay.h" #include "internals.h"
@@ -31,6 +32,20 @@
#define MXIC_CMD_POWER_DOWN 0xB9
+#define ONFI_FEATURE_ADDR_30LFXG18AC_OTP 0x90 +#define MACRONIX_30LFXG18AC_OTP_START_PAGE 0 +#define MACRONIX_30LFXG18AC_OTP_PAGES 30 +#define MACRONIX_30LFXG18AC_OTP_PAGE_SIZE 2112 +#define MACRONIX_30LFXG18AC_OTP_START_BYTE \ + (MACRONIX_30LFXG18AC_OTP_START_PAGE * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) +#define MACRONIX_30LFXG18AC_OTP_SIZE_BYTES \ + (MACRONIX_30LFXG18AC_OTP_PAGES * \ + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE) + +#define MACRONIX_30LFXG18AC_OTP_EN BIT(0) +#define MACRONIX_30LFXG18AC_OTP_LOCKED BIT(1) + struct nand_onfi_vendor_macronix { u8 reserved; u8 reliability_func; @@ -316,6 +331,203 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip) chip->ops.resume = mxic_nand_resume; }
+static int macronix_30lfxg18ac_get_otp_info(struct mtd_info *mtd, size_t len, + size_t *retlen, + struct otp_info *buf) +{ + if (len < sizeof(*buf)) + return -EINVAL; + + /* Don't know how to check that OTP is locked. */ + buf->locked = 0; + buf->start = MACRONIX_30LFXG18AC_OTP_START_BYTE; + buf->length = MACRONIX_30LFXG18AC_OTP_SIZE_BYTES; + + *retlen = sizeof(*buf); + + return 0; +} + +static int macronix_30lfxg18ac_otp_enable(struct nand_chip *nand) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN; + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int macronix_30lfxg18ac_otp_disable(struct nand_chip *nand) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + + return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); +} + +static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd, + loff_t offs_in_flash, + size_t len, size_t *retlen, + u_char *buf, bool write) +{ + struct nand_chip *nand; + size_t bytes_handled; + off_t offs_in_page; + uint64_t page; + void *dma_buf; + int ret; + + /* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer, + * so allocate properly aligned memory for it. This is + * needed because cross page accesses may lead to unaligned + * buffer address for DMA. + */ + dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL); + if (!dma_buf) + return -ENOMEM; + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + ret = macronix_30lfxg18ac_otp_enable(nand); + if (ret) + goto out_otp; + + page = offs_in_flash; + /* 'page' will be result of division. */ + offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE); + bytes_handled = 0; + + while (bytes_handled < len && + page < MACRONIX_30LFXG18AC_OTP_PAGES) { + size_t bytes_to_handle; + + bytes_to_handle = min_t(size_t, len - bytes_handled, + MACRONIX_30LFXG18AC_OTP_PAGE_SIZE - + offs_in_page); + + if (write) { + memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle); + ret = nand_prog_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + } else { + ret = nand_read_page_op(nand, page, offs_in_page, + dma_buf, bytes_to_handle); + if (!ret) + memcpy(&buf[bytes_handled], dma_buf, + bytes_to_handle); + } + if (ret) + goto out_otp; + + bytes_handled += bytes_to_handle; + offs_in_page = 0; + page++; + } + + *retlen = bytes_handled; + +out_otp: + if (ret) + dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + WARN(ret, "failed to leave OTP mode after %s\n", + write ? "write" : "read"); + nand_deselect_target(nand); + kfree(dma_buf); + + return ret; +} + +static int macronix_30lfxg18ac_write_otp(struct mtd_info *mtd, loff_t to, + size_t len, size_t *rlen, + const u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, to, len, rlen, (u_char *)buf, + true); +} + +static int macronix_30lfxg18ac_read_otp(struct mtd_info *mtd, loff_t from, + size_t len, size_t *rlen, + u_char *buf) +{ + return __macronix_30lfxg18ac_rw_otp(mtd, from, len, rlen, buf, false); +} + +static int macronix_30lfxg18ac_lock_otp(struct mtd_info *mtd, loff_t from, + size_t len) +{ + uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 }; + struct nand_chip *nand; + int ret; + + if (from != MACRONIX_30LFXG18AC_OTP_START_BYTE || + len != MACRONIX_30LFXG18AC_OTP_SIZE_BYTES) + return -EINVAL; + + dev_dbg(&mtd->dev, "locking OTP\n"); + + nand = mtd_to_nand(mtd); + nand_select_target(nand, 0); + + feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN | + MACRONIX_30LFXG18AC_OTP_LOCKED; + ret = nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP, + feature_buf); + if (ret) { + dev_err(&mtd->dev, + "failed to lock OTP (set features): %i\n", ret); + nand_deselect_target(nand); + return ret; + } + + /* Do dummy page prog with zero address. */ + feature_buf[0] = 0; + ret = nand_prog_page_op(nand, 0, 0, feature_buf, 1); + if (ret) + dev_err(&mtd->dev, + "failed to lock OTP (page prog): %i\n", ret); + + ret = macronix_30lfxg18ac_otp_disable(nand); + WARN(ret, "failed to leave OTP mode after lock\n"); + + nand_deselect_target(nand); + + return ret; +} + +static void macronix_nand_setup_otp(struct nand_chip *chip) +{ + static const char * const supported_otp_models[] = { + "MX30LF1G18AC", + "MX30LF2G18AC", + "MX30LF4G18AC", + }; + struct mtd_info *mtd; + + if (!chip->parameters.supports_set_get_features) + return; + + if (match_string(supported_otp_models, + ARRAY_SIZE(supported_otp_models), + chip->parameters.model) < 0) + return; + + bitmap_set(chip->parameters.get_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + bitmap_set(chip->parameters.set_feature_list, + ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1); + + mtd = nand_to_mtd(chip); + mtd->_get_fact_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_fact_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_get_user_prot_info = macronix_30lfxg18ac_get_otp_info; + mtd->_read_user_prot_reg = macronix_30lfxg18ac_read_otp; + mtd->_write_user_prot_reg = macronix_30lfxg18ac_write_otp; + mtd->_lock_user_prot_reg = macronix_30lfxg18ac_lock_otp; +} + static int macronix_nand_init(struct nand_chip *chip) { if (nand_is_slc(chip)) @@ -325,6 +537,7 @@ static int macronix_nand_init(struct nand_chip *chip) macronix_nand_onfi_init(chip); macronix_nand_block_protection_support(chip); macronix_nand_deep_power_down_support(chip); + macronix_nand_setup_otp(chip);
return 0; }