On Wed, Jun 1, 2022 at 6:55 AM Christian König christian.koenig@amd.com wrote:

Am 31.05.22 um 23:25 schrieb Kalesh Singh:

...

To be able to account the amount of memory a process is keeping pinned by open file descriptors add a 'size' field to fdinfo output.

dmabufs fds already expose a 'size' field for this reason, remove this and make it a common field for all fds. This allows tracking of other types of memory (e.g. memfd and ashmem in Android).

Signed-off-by: Kalesh Singh kaleshsingh@google.com

At least for the DMA-buf part feel free to add an Reviewed-by: Christian König christian.koenig@amd.com for this.

Thanks for the review, Christian.

--Kalesh

Regards, Christian.

...

---

Changes from rfc:

• Split adding 'size' and 'path' into a separate patches, per Christian
• Split fdinfo seq_printf into separate lines, per Christian
• Fix indentation (use tabs) in documentaion, per Randy

Documentation/filesystems/proc.rst | 12 ++++++++++-- drivers/dma-buf/dma-buf.c | 1 - fs/proc/fd.c | 9 +++++---- 3 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 1bc91fb8c321..779c05528e87 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -1886,13 +1886,14 @@ if precise results are needed. 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file

---

This file provides information associated with an opened file. The regular -files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'. +files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'.

• The 'pos' represents the current offset of the opened file in decimal form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the file has been created with [see open(2) for details] and 'mnt_id' represents mount ID of the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of

-the file. +the file, and 'size' represents the size of the file in bytes.

A typical output is::

@@ -1900,6 +1901,7 @@ A typical output is:: flags: 0100002 mnt_id: 19 ino: 63107

• size:   0
  
  

  All locks associated with a file descriptor are shown in its fdinfo too::

@@ -1917,6 +1919,7 @@ Eventfd files flags: 04002 mnt_id: 9 ino: 63107

• size:   0
  eventfd-count:  5a
  
  

  where 'eventfd-count' is hex value of a counter.

@@ -1930,6 +1933,7 @@ Signalfd files flags: 04002 mnt_id: 9 ino: 63107

• size:   0
  sigmask:        0000000000000200
  
  

  where 'sigmask' is hex value of the signal mask associated

@@ -1944,6 +1948,7 @@ Epoll files flags: 02 mnt_id: 9 ino: 63107

• size:   0
  tfd:        5 events:       1d data: ffffffffffffffff pos:0 ino:61af sdev:7
  
  

  where 'tfd' is a target file descriptor number in decimal form,

@@ -1962,6 +1967,7 @@ For inotify files the format is the following:: flags: 02000000 mnt_id: 9 ino: 63107

• size:   0
  inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
  
  

  where 'wd' is a watch descriptor in decimal form, i.e. a target file

@@ -1985,6 +1991,7 @@ For fanotify files the format is:: flags: 02 mnt_id: 9 ino: 63107

• size:   0
  fanotify flags:10 event-flags:0
  fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
  fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
  

@@ -2010,6 +2017,7 @@ Timerfd files flags: 02 mnt_id: 9 ino: 63107

• size:   0
  clockid: 0
  ticks: 0
  settime flags: 01
  

diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index 32f55640890c..5f2ae38c960f 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -378,7 +378,6 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file) { struct dma_buf *dmabuf = file->private_data;

• seq_printf(m, "size:\t%zu\n", dmabuf->size);
  /* Don't count the temporary reference taken inside procfs seq_show */
  seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1);
  seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name);
  

diff --git a/fs/proc/fd.c b/fs/proc/fd.c index 913bef0d2a36..464bc3f55759 100644 --- a/fs/proc/fd.c +++ b/fs/proc/fd.c @@ -54,10 +54,11 @@ static int seq_show(struct seq_file *m, void *v) if (ret) return ret;

• seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
  

•            (long long)file->f_pos, f_flags,
  

•            real_mount(file->f_path.mnt)->mnt_id,
  

•            file_inode(file)->i_ino);
  

• seq_printf(m, "pos:\t%lli\n", (long long)file->f_pos);
  

• seq_printf(m, "flags:\t0%o\n", f_flags);
  

• seq_printf(m, "mnt_id:\t%i\n", real_mount(file->f_path.mnt)->mnt_id);
  

• seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino);
  

• seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);
  
  /* show_fd_locks() never deferences files so a stale value is safe */
  show_fd_locks(m, file, files);
  

On 5/31/22 14:25, Kalesh Singh wrote:

In order to identify the type of memory a process has pinned through its open fds, add the file path to fdinfo output. This allows identifying memory types based on common prefixes. e.g. "/memfd...", "/dmabuf...", "/dev/ashmem...".

Access to /proc/<pid>/fdinfo is governed by PTRACE_MODE_READ_FSCREDS the same as /proc/<pid>/maps which also exposes the file path of mappings; so the security permissions for accessing path is consistent with that of /proc/<pid>/maps.

Hi Kalesh,

I think I see the value in the size field, but I'm curious about path, which is available via readlink /proc/<pid>/fd/<n>, since those are symlinks to the file themselves.

File paths can contain fun characters like newlines or colons, which could make parsing out filenames in this text file... fun. How would your userspace parsing logic handle "/home/stephen/filename\nsize:\t4096"? The readlink(2) API makes that easy already.

Is the goal avoiding races (e.g. file descriptor 3 is closed and reopened to a different path between reading fdinfo and stating the fd)?

Stephen

Signed-off-by: Kalesh Singh kaleshsingh@google.com

Changes from rfc:

• Split adding 'size' and 'path' into a separate patches, per Christian
• Fix indentation (use tabs) in documentaion, per Randy

Documentation/filesystems/proc.rst | 14 ++++++++++++-- fs/proc/fd.c | 4 ++++ 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 779c05528e87..591f12d30d97 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -1886,14 +1886,16 @@ if precise results are needed. 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file

---

This file provides information associated with an opened file. The regular -files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'. +files have at least six fields -- 'pos', 'flags', 'mnt_id', 'ino', 'size', +and 'path'. The 'pos' represents the current offset of the opened file in decimal form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the file has been created with [see open(2) for details] and 'mnt_id' represents mount ID of the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of -the file, and 'size' represents the size of the file in bytes. +the file, 'size' represents the size of the file in bytes, and 'path' +represents the file path. A typical output is:: @@ -1902,6 +1904,7 @@ A typical output is:: mnt_id: 19 ino: 63107 size: 0

• path: /dev/null

All locks associated with a file descriptor are shown in its fdinfo too:: @@ -1920,6 +1923,7 @@ Eventfd files mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:[eventfd] eventfd-count: 5a

where 'eventfd-count' is hex value of a counter. @@ -1934,6 +1938,7 @@ Signalfd files mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:[signalfd] sigmask: 0000000000000200

where 'sigmask' is hex value of the signal mask associated @@ -1949,6 +1954,7 @@ Epoll files mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:[eventpoll] tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7

where 'tfd' is a target file descriptor number in decimal form, @@ -1968,6 +1974,7 @@ For inotify files the format is the following:: mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:inotify inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d

where 'wd' is a watch descriptor in decimal form, i.e. a target file @@ -1992,6 +1999,7 @@ For fanotify files the format is:: mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:[fanotify] fanotify flags:10 event-flags:0 fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003 fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4

@@ -2018,6 +2026,7 @@ Timerfd files mnt_id: 9 ino: 63107 size: 0

• path: anon_inode:[timerfd] clockid: 0 ticks: 0 settime flags: 01

@@ -2042,6 +2051,7 @@ DMA Buffer files mnt_id: 9 ino: 63107 size: 32768

• path: /dmabuf: count: 2 exp_name: system-heap

diff --git a/fs/proc/fd.c b/fs/proc/fd.c index 464bc3f55759..8889a8ba09d4 100644 --- a/fs/proc/fd.c +++ b/fs/proc/fd.c @@ -60,6 +60,10 @@ static int seq_show(struct seq_file *m, void *v) seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino); seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);

• seq_puts(m, "path:\t");
• seq_file_path(m, file, "\n");
• seq_putc(m, '\n');
• /* show_fd_locks() never deferences files so a stale value is safe */ show_fd_locks(m, file, files); if (seq_has_overflowed(m))

Kalesh Singh kaleshsingh@google.com writes:

On Tue, May 31, 2022 at 3:07 PM Stephen Brennan stephen.s.brennan@oracle.com wrote:

...

On 5/31/22 14:25, Kalesh Singh wrote:

...

In order to identify the type of memory a process has pinned through its open fds, add the file path to fdinfo output. This allows identifying memory types based on common prefixes. e.g. "/memfd...", "/dmabuf...", "/dev/ashmem...".

Access to /proc/<pid>/fdinfo is governed by PTRACE_MODE_READ_FSCREDS the same as /proc/<pid>/maps which also exposes the file path of mappings; so the security permissions for accessing path is consistent with that of /proc/<pid>/maps.

Hi Kalesh,

Hi Stephen,

Thanks for taking a look.

...

I think I see the value in the size field, but I'm curious about path, which is available via readlink /proc/<pid>/fd/<n>, since those are symlinks to the file themselves.

This could work if we are root, but the file permissions wouldn't allow us to do the readlink on other processes otherwise. We want to be able to capture the system state in production environments from some trusted process with ptrace read capability.

Interesting, thanks for explaining. It seems weird to have a duplicate interface for the same information but such is life.

...

File paths can contain fun characters like newlines or colons, which could make parsing out filenames in this text file... fun. How would your userspace parsing logic handle "/home/stephen/filename\nsize:\t4096"? The readlink(2) API makes that easy already.

I think since we have escaped the "\n" (seq_file_path(m, file, "\n")),

I really should have read through that function before commenting, thanks for teaching me something new :)

Stephen

then user space might parse this line like:

if (strncmp(line, "path:\t", 6) == 0) char* path = line + 6;

Thanks, Kalesh

...

Is the goal avoiding races (e.g. file descriptor 3 is closed and reopened to a different path between reading fdinfo and stating the fd)?

Stephen

...

Signed-off-by: Kalesh Singh kaleshsingh@google.com

Changes from rfc:

• Split adding 'size' and 'path' into a separate patches, per Christian
• Fix indentation (use tabs) in documentaion, per Randy

Documentation/filesystems/proc.rst | 14 ++++++++++++-- fs/proc/fd.c | 4 ++++ 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 779c05528e87..591f12d30d97 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -1886,14 +1886,16 @@ if precise results are needed. 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file

---

This file provides information associated with an opened file. The regular -files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'. +files have at least six fields -- 'pos', 'flags', 'mnt_id', 'ino', 'size', +and 'path'.

The 'pos' represents the current offset of the opened file in decimal form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the file has been created with [see open(2) for details] and 'mnt_id' represents mount ID of the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of -the file, and 'size' represents the size of the file in bytes. +the file, 'size' represents the size of the file in bytes, and 'path' +represents the file path.

A typical output is::

@@ -1902,6 +1904,7 @@ A typical output is:: mnt_id: 19 ino: 63107 size: 0

• path:   /dev/null
  
  

All locks associated with a file descriptor are shown in its fdinfo too::

@@ -1920,6 +1923,7 @@ Eventfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[eventfd]
  eventfd-count:  5a
  
  

where 'eventfd-count' is hex value of a counter. @@ -1934,6 +1938,7 @@ Signalfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[signalfd]
  sigmask:        0000000000000200
  
  

where 'sigmask' is hex value of the signal mask associated @@ -1949,6 +1954,7 @@ Epoll files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[eventpoll]
  tfd:        5 events:       1d data: ffffffffffffffff pos:0 ino:61af sdev:7
  
  

where 'tfd' is a target file descriptor number in decimal form, @@ -1968,6 +1974,7 @@ For inotify files the format is the following:: mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:inotify
  inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
  
  

where 'wd' is a watch descriptor in decimal form, i.e. a target file @@ -1992,6 +1999,7 @@ For fanotify files the format is:: mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[fanotify]
  fanotify flags:10 event-flags:0
  fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
  fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
  

@@ -2018,6 +2026,7 @@ Timerfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[timerfd]
  clockid: 0
  ticks: 0
  settime flags: 01
  

@@ -2042,6 +2051,7 @@ DMA Buffer files mnt_id: 9 ino: 63107 size: 32768

• path:   /dmabuf:
  count:  2
  exp_name:  system-heap
  
  

diff --git a/fs/proc/fd.c b/fs/proc/fd.c index 464bc3f55759..8889a8ba09d4 100644 --- a/fs/proc/fd.c +++ b/fs/proc/fd.c @@ -60,6 +60,10 @@ static int seq_show(struct seq_file *m, void *v) seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino); seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);

• seq_puts(m, "path:\t");
  

• seq_file_path(m, file, "\n");
  

• seq_putc(m, '\n');
  

• /* show_fd_locks() never deferences files so a stale value is safe */
  show_fd_locks(m, file, files);
  if (seq_has_overflowed(m))
  

-- To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.

On Wed, Jun 1, 2022 at 8:02 AM Christian König ckoenig.leichtzumerken@gmail.com wrote:

Am 01.06.22 um 00:48 schrieb Stephen Brennan:

...

Kalesh Singh kaleshsingh@google.com writes:

...

On Tue, May 31, 2022 at 3:07 PM Stephen Brennan stephen.s.brennan@oracle.com wrote:

...

On 5/31/22 14:25, Kalesh Singh wrote:

...

In order to identify the type of memory a process has pinned through its open fds, add the file path to fdinfo output. This allows identifying memory types based on common prefixes. e.g. "/memfd...", "/dmabuf...", "/dev/ashmem...".

Access to /proc/<pid>/fdinfo is governed by PTRACE_MODE_READ_FSCREDS the same as /proc/<pid>/maps which also exposes the file path of mappings; so the security permissions for accessing path is consistent with that of /proc/<pid>/maps.

Hi Kalesh,

Hi Stephen,

Thanks for taking a look.

...

I think I see the value in the size field, but I'm curious about path, which is available via readlink /proc/<pid>/fd/<n>, since those are symlinks to the file themselves.

This could work if we are root, but the file permissions wouldn't allow us to do the readlink on other processes otherwise. We want to be able to capture the system state in production environments from some trusted process with ptrace read capability.

Interesting, thanks for explaining. It seems weird to have a duplicate interface for the same information but such is life.

Yeah, the size change is really straight forward but for this one I'm not 100% sure either.

The 2 concerns I think are: 1. Fun characters in the path names 2. If exposing the path is appropriate to begin with.

One way I think we can address both is to only expose the path for anon inodes. Then we have well-known path formats and we don't expose much about which files a process is accessing since these aren't real paths.

+ if (is_anon_inode(inode)) { + seq_puts(m, "path:\t"); + seq_file_path(m, file, "\n"); + seq_putc(m, '\n'); + }

Interested to hear thoughts on it.

Probably best to ping some core fs developer before going further with it.

linux-fsdevel is cc'd here. Adding Al Vrio as well. Please let me know if there are other parties I should include.

BTW: Any preferred branch to push this upstream? If not I can take it through drm-misc-next.

No other dependencies for this, so drm-misc-next is good.

Thanks, Kalesh

Regards, Christian.

...

...

...

File paths can contain fun characters like newlines or colons, which could make parsing out filenames in this text file... fun. How would your userspace parsing logic handle "/home/stephen/filename\nsize:\t4096"? The readlink(2) API makes that easy already.

I think since we have escaped the "\n" (seq_file_path(m, file, "\n")),

I really should have read through that function before commenting, thanks for teaching me something new :)

Stephen

...

then user space might parse this line like:

if (strncmp(line, "path:\t", 6) == 0) char* path = line + 6;

Thanks, Kalesh

...

Is the goal avoiding races (e.g. file descriptor 3 is closed and reopened to a different path between reading fdinfo and stating the fd)?

Stephen

...

Signed-off-by: Kalesh Singh kaleshsingh@google.com

Changes from rfc:

• Split adding 'size' and 'path' into a separate patches, per Christian
• Fix indentation (use tabs) in documentaion, per Randy

Documentation/filesystems/proc.rst | 14 ++++++++++++-- fs/proc/fd.c | 4 ++++ 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 779c05528e87..591f12d30d97 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -1886,14 +1886,16 @@ if precise results are needed. 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file

---

This file provides information associated with an opened file. The regular -files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'. +files have at least six fields -- 'pos', 'flags', 'mnt_id', 'ino', 'size', +and 'path'.

The 'pos' represents the current offset of the opened file in decimal form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the file has been created with [see open(2) for details] and 'mnt_id' represents mount ID of the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of -the file, and 'size' represents the size of the file in bytes. +the file, 'size' represents the size of the file in bytes, and 'path' +represents the file path.

A typical output is::

@@ -1902,6 +1904,7 @@ A typical output is:: mnt_id: 19 ino: 63107 size: 0

• path:   /dev/null
  
  

  All locks associated with a file descriptor are shown in its fdinfo too::

@@ -1920,6 +1923,7 @@ Eventfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[eventfd]
   eventfd-count:  5a
  
  

  where 'eventfd-count' is hex value of a counter.

@@ -1934,6 +1938,7 @@ Signalfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[signalfd]
   sigmask:        0000000000000200
  
  

  where 'sigmask' is hex value of the signal mask associated

@@ -1949,6 +1954,7 @@ Epoll files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[eventpoll]
   tfd:        5 events:       1d data: ffffffffffffffff pos:0 ino:61af sdev:7
  
  

  where 'tfd' is a target file descriptor number in decimal form,

@@ -1968,6 +1974,7 @@ For inotify files the format is the following:: mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:inotify
   inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
  
  

  where 'wd' is a watch descriptor in decimal form, i.e. a target file

@@ -1992,6 +1999,7 @@ For fanotify files the format is:: mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[fanotify]
   fanotify flags:10 event-flags:0
   fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
   fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
  

@@ -2018,6 +2026,7 @@ Timerfd files mnt_id: 9 ino: 63107 size: 0

• path:   anon_inode:[timerfd]
   clockid: 0
   ticks: 0
   settime flags: 01
  

@@ -2042,6 +2051,7 @@ DMA Buffer files mnt_id: 9 ino: 63107 size: 32768

• path:   /dmabuf:
   count:  2
   exp_name:  system-heap
  
  

diff --git a/fs/proc/fd.c b/fs/proc/fd.c index 464bc3f55759..8889a8ba09d4 100644 --- a/fs/proc/fd.c +++ b/fs/proc/fd.c @@ -60,6 +60,10 @@ static int seq_show(struct seq_file *m, void *v) seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino); seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);

• seq_puts(m, "path:\t");
  

• seq_file_path(m, file, "\n");
  

• seq_putc(m, '\n');
  

•  /* show_fd_locks() never deferences files so a stale value is safe */
   show_fd_locks(m, file, files);
   if (seq_has_overflowed(m))
  

-- To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.

---

Linaro-mm-sig mailing list -- linaro-mm-sig@lists.linaro.org To unsubscribe send an email to linaro-mm-sig-leave@lists.linaro.org

On Wed, Jun 15, 2022 at 10:00 AM Kalesh Singh kaleshsingh@google.com wrote:

On Wed, Jun 1, 2022 at 8:31 PM Kalesh Singh kaleshsingh@google.com wrote:

...

On Wed, Jun 1, 2022 at 8:02 AM Christian König ckoenig.leichtzumerken@gmail.com wrote:

...

Am 01.06.22 um 00:48 schrieb Stephen Brennan:

...

Kalesh Singh kaleshsingh@google.com writes:

...

On Tue, May 31, 2022 at 3:07 PM Stephen Brennan stephen.s.brennan@oracle.com wrote:

...

On 5/31/22 14:25, Kalesh Singh wrote: > In order to identify the type of memory a process has pinned through > its open fds, add the file path to fdinfo output. This allows > identifying memory types based on common prefixes. e.g. "/memfd...", > "/dmabuf...", "/dev/ashmem...". > > Access to /proc/<pid>/fdinfo is governed by PTRACE_MODE_READ_FSCREDS > the same as /proc/<pid>/maps which also exposes the file path of > mappings; so the security permissions for accessing path is consistent > with that of /proc/<pid>/maps. Hi Kalesh,

Hi Stephen,

Thanks for taking a look.

...

I think I see the value in the size field, but I'm curious about path, which is available via readlink /proc/<pid>/fd/<n>, since those are symlinks to the file themselves.

This could work if we are root, but the file permissions wouldn't allow us to do the readlink on other processes otherwise. We want to be able to capture the system state in production environments from some trusted process with ptrace read capability.

Interesting, thanks for explaining. It seems weird to have a duplicate interface for the same information but such is life.

Yeah, the size change is really straight forward but for this one I'm not 100% sure either.

The 2 concerns I think are:

1. Fun characters in the path names
2. If exposing the path is appropriate to begin with.

One way I think we can address both is to only expose the path for anon inodes. Then we have well-known path formats and we don't expose much about which files a process is accessing since these aren't real paths.

•   if (is_anon_inode(inode)) {
  

•           seq_puts(m, "path:\t");
  

•           seq_file_path(m, file, "\n");
  

•           seq_putc(m, '\n');
  

•   }
  
  

Interested to hear thoughts on it.

Adding Christoph,

To be able to identify types of shared memory processes pin through FDs in production builds, we would like to add a 'path' field to fdinfo of anon inodes. We could then use the common prefixes ("/dmabuf", "/memfd", ...) to identify different types.

Would appreciate any feedback from the FS perspective.

Hi all,

If there are no objections to this, then I plan to respin the patch for just anonymous inodes. Please let me know if there are further concerns.

Thanks, Kalesh

Thanks, Kalesh

...

...

Probably best to ping some core fs developer before going further with it.

linux-fsdevel is cc'd here. Adding Al Vrio as well. Please let me know if there are other parties I should include.

...

BTW: Any preferred branch to push this upstream? If not I can take it through drm-misc-next.

No other dependencies for this, so drm-misc-next is good.

Thanks, Kalesh

...

Regards, Christian.

...

...

...

File paths can contain fun characters like newlines or colons, which could make parsing out filenames in this text file... fun. How would your userspace parsing logic handle "/home/stephen/filename\nsize:\t4096"? The readlink(2) API makes that easy already.

I think since we have escaped the "\n" (seq_file_path(m, file, "\n")),

I really should have read through that function before commenting, thanks for teaching me something new :)

Stephen

...

then user space might parse this line like:

if (strncmp(line, "path:\t", 6) == 0) char* path = line + 6;

Thanks, Kalesh

...

Is the goal avoiding races (e.g. file descriptor 3 is closed and reopened to a different path between reading fdinfo and stating the fd)?

Stephen

> Signed-off-by: Kalesh Singh kaleshsingh@google.com > --- > > Changes from rfc: > - Split adding 'size' and 'path' into a separate patches, per Christian > - Fix indentation (use tabs) in documentaion, per Randy > > Documentation/filesystems/proc.rst | 14 ++++++++++++-- > fs/proc/fd.c | 4 ++++ > 2 files changed, 16 insertions(+), 2 deletions(-) > > diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst > index 779c05528e87..591f12d30d97 100644 > --- a/Documentation/filesystems/proc.rst > +++ b/Documentation/filesystems/proc.rst > @@ -1886,14 +1886,16 @@ if precise results are needed. > 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file > --------------------------------------------------------------- > This file provides information associated with an opened file. The regular > -files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'. > +files have at least six fields -- 'pos', 'flags', 'mnt_id', 'ino', 'size', > +and 'path'. > > The 'pos' represents the current offset of the opened file in decimal > form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the > file has been created with [see open(2) for details] and 'mnt_id' represents > mount ID of the file system containing the opened file [see 3.5 > /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of > -the file, and 'size' represents the size of the file in bytes. > +the file, 'size' represents the size of the file in bytes, and 'path' > +represents the file path. > > A typical output is:: > > @@ -1902,6 +1904,7 @@ A typical output is:: > mnt_id: 19 > ino: 63107 > size: 0 > + path: /dev/null > > All locks associated with a file descriptor are shown in its fdinfo too:: > > @@ -1920,6 +1923,7 @@ Eventfd files > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:[eventfd] > eventfd-count: 5a > > where 'eventfd-count' is hex value of a counter. > @@ -1934,6 +1938,7 @@ Signalfd files > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:[signalfd] > sigmask: 0000000000000200 > > where 'sigmask' is hex value of the signal mask associated > @@ -1949,6 +1954,7 @@ Epoll files > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:[eventpoll] > tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7 > > where 'tfd' is a target file descriptor number in decimal form, > @@ -1968,6 +1974,7 @@ For inotify files the format is the following:: > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:inotify > inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d > > where 'wd' is a watch descriptor in decimal form, i.e. a target file > @@ -1992,6 +1999,7 @@ For fanotify files the format is:: > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:[fanotify] > fanotify flags:10 event-flags:0 > fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003 > fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4 > @@ -2018,6 +2026,7 @@ Timerfd files > mnt_id: 9 > ino: 63107 > size: 0 > + path: anon_inode:[timerfd] > clockid: 0 > ticks: 0 > settime flags: 01 > @@ -2042,6 +2051,7 @@ DMA Buffer files > mnt_id: 9 > ino: 63107 > size: 32768 > + path: /dmabuf: > count: 2 > exp_name: system-heap > > diff --git a/fs/proc/fd.c b/fs/proc/fd.c > index 464bc3f55759..8889a8ba09d4 100644 > --- a/fs/proc/fd.c > +++ b/fs/proc/fd.c > @@ -60,6 +60,10 @@ static int seq_show(struct seq_file *m, void *v) > seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino); > seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size); > > + seq_puts(m, "path:\t"); > + seq_file_path(m, file, "\n"); > + seq_putc(m, '\n'); > + > /* show_fd_locks() never deferences files so a stale value is safe */ > show_fd_locks(m, file, files);

> if (seq_has_overflowed(m))

To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.

---

Linaro-mm-sig mailing list -- linaro-mm-sig@lists.linaro.org To unsubscribe send an email to linaro-mm-sig-leave@lists.linaro.org