On Tue, 5 Feb 2013 22:47:21 +0100 Csordás Csaba Ifj. cscsordas@gmail.com wrote:
I'm having troubles at the first step: determining the erase block size. The strange results are below. The original FAT layout was not saved when the drive was purchased.
The original partition map may not be that helpful anyway.
If you use the --count=N option where N is 128 or so or some other quite large number, you might get better results. The test will take longer as it will run each test N times.
Just run: flashbench -a /dev/disk/by-id/usb-ADATA_USB_Flash_Drive_1061309422330015-0:0 --blocksize=2048 --count=100
It also could be that this device isn't measurable this way.
-Andrew