On 23.09.20 18:05, Chang, Abner (HPS SW/FW Technologist) wrote:
-----Original Message----- From: Heinrich Schuchardt [mailto:xypron.glpk@gmx.de] Sent: Wednesday, September 23, 2020 3:42 PM To: Chang, Abner (HPS SW/FW Technologist) abner.chang@hpe.com; boot-architecture@lists.linaro.org; Atish Patra atishp@atishpatra.org Cc: Rick Chen rick@andestech.com; Atish Patra atish.patra@wdc.com; Grant Likely grant.likely@arm.com; Ard Biesheuvel ardb@kernel.org Subject: Re: EBBR: RISC-V handoff to OS
On 23.09.20 08:51, Chang, Abner (HPS SW/FW Technologist) wrote:
-----Original Message----- From: Heinrich Schuchardt [mailto:xypron.glpk@gmx.de] Sent: Wednesday, September 23, 2020 2:18 PM To: Chang, Abner (HPS SW/FW Technologist) abner.chang@hpe.com; boot-architecture@lists.linaro.org; Atish Patra atishp@atishpatra.org Cc: Rick Chen rick@andestech.com; Atish Patra atish.patra@wdc.com; Grant Likely grant.likely@arm.com; Ard Biesheuvel ardb@kernel.org Subject: Re: EBBR: RISC-V handoff to OS
On 9/23/20 7:24 AM, Chang, Abner (HPS SW/FW Technologist) wrote:
-----Original Message----- From: Heinrich Schuchardt [mailto:xypron.glpk@gmx.de] Sent: Tuesday, September 22, 2020 5:30 PM To: boot-architecture@lists.linaro.org; Chang, Abner (HPS SW/FW Technologist) abner.chang@hpe.com; Atish Patra atishp@atishpatra.org Cc: boot-architecture@lists.linaro.org; Rick Chen rick@andestech.com; Atish Patra atish.patra@wdc.com; Grant Likely grant.likely@arm.com; Ard Biesheuvel ardb@kernel.org Subject: RE: EBBR: RISC-V handoff to OS
Am 22. September 2020 08:30:57 MESZ schrieb "Chang, Abner (HPS
SW/FW
Technologist)" abner.chang@hpe.com: > > >> -----Original Message----- >> From: Atish Patra [mailto:atishp@atishpatra.org] >> Sent: Tuesday, September 22, 2020 2:08 PM >> To: Chang, Abner (HPS SW/FW Technologist)
>> Cc: Heinrich Schuchardt xypron.glpk@gmx.de; Atish Patra >> atish.patra@wdc.com; boot-architecture@lists.linaro.org; Grant > Likely >> grant.likely@arm.com; Ard Biesheuvel ardb@kernel.org; Rick
Chen
>> rick@andestech.com >> Subject: Re: EBBR: RISC-V handoff to OS >> >> On Mon, Sep 21, 2020 at 6:11 PM Chang, Abner (HPS SW/FW >> Technologist) abner.chang@hpe.com wrote: >>> >>> >>> >>>> -----Original Message----- >>>> From: Atish Patra [mailto:atishp@atishpatra.org] >>>> Sent: Tuesday, September 22, 2020 2:28 AM >>>> To: Heinrich Schuchardt xypron.glpk@gmx.de >>>> Cc: Atish Patra atish.patra@wdc.com; >>>> boot-architecture@lists.linaro.org; >>>> Grant Likely grant.likely@arm.com; Ard Biesheuvel >>>> ardb@kernel.org; Rick Chen rick@andestech.com; Chang,
Abner
>> (HPS >>>> SW/FW Technologist) abner.chang@hpe.com >>>> Subject: Re: EBBR: RISC-V handoff to OS >>>> >>>> On Mon, Sep 21, 2020 at 9:23 AM Heinrich Schuchardt >>>> xypron.glpk@gmx.de wrote: >>>>> >>>>> Hello Atish, >>>>> >>>>> the UEFI spec has this sentence: >>>>> >>>>> "When UEFI firmware handoff control to OS, the RISC-V is > operated >>>>> in machine-mode privilege." (M-mode is the equivalent to EL3 >>>>> in > ARM). >>> Yes, this is a pretty old section in UEFI spec even before >>> OpenSBI > as I can >> remember and haven't been updated to sync with latest status >> RISC-V > works. >>> >>>>> >>>>> This does not make any sense to me when using a secure > execution >>>>> environement (SEE) like OpenSBI. >>>>> >>>>> The hand-off should occur in S-Mode if the CPU supports it and >>>>> only in M-Mode when the CPU only supports M-mode. >>>>> >>>> +Abner >>>> >>>> Yes. Abner has already submitted an ECR for this & few other > RISC-V >>>> related changes to UEFI spec. I am not sure about the current > status >> though. >>>> >>>> @Abner: Do you know the latest status ? >>> Yes, the ECR was submitted to USWG for review, however the
meeting
>>> canceled often recently and the process goes slow. I will keep >>> following up >>> >>>> Maybe you also attach the latest ECR here for a broader review. >>> I may not allowed to public ECR here unless all people in the > mailing >>> list are the members of UEFI org… but the sentence we revised in > ECR >>> is as below, >>> >>> "When UEFI firmware handoff control to Supervisor mode OS, >>> RISC-V > boot >> hart must be operated in Supervisor mode, and the memory
addressing
>> must be operated in Bare mode which is no memory address >> translation > or >> protection through the virtual page table entry." >>> >> >> Thanks. >> >>> We didn’t mention hand-off to M-Mode if CPU only support M-
Mode
>> because we only verified edk2 RISC-V port in S-Mode with OpenSBI, >> but didn’t try it on M-Mode even though the code is ready there. >>> >> >> That's correct. We can't run UEFI applications run time services >> in > M-mode as >> it requires virtual memory in current setup. >> I think it is better to keep that way there is a specific demand >> and > value in >> running UEFI applications in M-mode. >> >>>> >>>>> We should prescribe this in the EBBR and somehow get the UEFI > spec >>>>> fixed afterwards. >>>>> >>>> >>>> I will add it to the RISC-V EBBR PR (haven't sent it yet). >>>> >>>>> An other issue is the calling convention. Chapter "2.3.7.3 >>>>> Detailed Calling Convention" does not describe which registers > are >>>>> saved by the UEFI payload's entry point and restored by the >>>>> payload before calling the UEFI API or returning to the UEFI >>>>> payload. This concerns especially registers gp (x3) and tp > (x4). >>>>> >>>>> Into the EBBR or UEFI spec we should put a link to the "RISC-V > ELF >>>>> psABI specification" >>>>> > https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf >>>>> .md which is referenced by "The RISC-V Instruction Set Manual". >>>>> >>>>> From the "RISC-V ELF psABI specification" one might conclude > that >>>>> the UEFI payload should not be allowed to change gp and tp > before >>>>> calling >>>>> ExitBootServices() or SetVirtualAddressMap() whichever occurs > last. >>>>> >>>> >>>> Agreed. Thanks for pointing this out. I think this should go >>>> into the UEFI spec instead of EBBR spec. Any suggestions ? >>> To have this external link is good, I will add this link in ECR. >>>> >> >> Thanks again :). As per Heinrich's suggestion, it would also be >> good > to add >> some text about the state of gp & tp. > > Ok. I add some text, copied from psABI spec. :) > > "........ Registers tp and gp should not be modified in the > function,
I would not know what "in the function" refers to here.
We have a value of tp and gp passed from the firmware to the entry-point of the firmware. We need a definition describing what assumptions the firmware may or may not make about the value of tp and gp up to ExitBootServices and in SetVirtualAddressMap. I would not assume gp and tp to have any firmware related value afterwards.
Ok, I got your point. But do we mention "value of tp and gp passed from
the firmware to the entry-point of the firmware" somewhere in the particular spec? What is the spec of values you pass in tp/gp to the entry point of firmware?
It would be perfectly ok if the spec said that the firmware should make no assumptions about the value of these registers
I don’t think firmware has assumption of value in these registers because the calling convention doesn't use these two regs. Maybe the assembly code use these two regs for some purpose but firmware has to preserve it. The revised version in below,
but has to keep the values intact during an API call.
The important thing is that we have a clear definition of the interface between the firmware and the payload.
How about this, "Registers tp and gp are unallocatable and not preserved across the
function calls, UEFI firmware implementation of RISC-V platform should keep the values in these two registers intact during entire UEFI firmware boot process, UEFI boot service and runtime service. See “Link to UEFI Specification-Related Document” on https://uefi.org/uefi under the heading “RISC-V EFL psABI Specification” for the more descriptions of RISC-V calling convention."
Current situation in U-Boot
With U-Boot we currently have the following boot flows:
U-Boot -> payload OpenSBI -> payload
This should be
OpenSBI -> U-Boot -> payload
Sorry for the confusion.
U-Boot SPL -> OpenSBI -> U-Boot -> payload
HI Heinrich, What is the payload refers here? Is edk2 UEFI payload one of the payloads mentioned here? E.g. OpenSBI->UEFI firmware payload. And what is the term "firmware" refers to? e.g. Uboot is the firmware, edk2 UEFI implementation is also referred as the firmware. Is U-Boot mentioned here is the U-Boot UEFI implementation? I am confused by the terms used in this discussion.
For me OpenSBI, U-Boot, EDK2 are all part of the firmware.
Payload here means anything started by the firmware, e.g.
* GRUB * Linux * FreeBSD
U-Boot can start Linux via the Linux EFI boot stub (once it is merged for RISC-V) or via the legacy entry point. GRUB can only be run as a UEFI binary.
According to https://github.com/riscv/opensbi OpenSBI can start Linux via the legacy entry point.
Best regards
Heinrich
Abner
Upon entry U-Boot overwrites tp with the HART id on all HARTs and the boot HART's gp with a pointer to U-Boot's global data structure.
At boot time when the payload makes an API call U-Boot replaces the payload's gp by its own value upon entry and restores the payload's gp before returning to the payload.
At runtime UBoot neither touches gp nor tp.
Interrupt handling
Before ExitBootServices() handling of interrupts and exceptions is the task of the firmware. As both may rely on the values of tp and gp the payload should not overwrite them.
When the operating system takes over it also has gets the responsibility for handling interrupts and exceptions and will set its own
values of tp and gp.
Some operating systems call SetVirtualAddressMap() after ExitBootServices(), others don't. On Linux this is controlled by kernel command line parameter efi=novamap.
Conclusion
I would suggest the following rules:
Until ExitBootServices() returns to the payload the firmware is the owner of registers gp and tp. The payload MUST NOT alter these values.
This implies that when handling EVT_SIGNAL_EXIT_BOOT_SERVICES
events
the payload MUST NOT alter gp and tp.
After ExitBootServices() the payload is the owner of registers gp and tp. The firmware MUST NOT alter these values.
The firmware solution you mentioned above is the payload solution with
either uboot or opensbi. However, edk2 firmware solution is not the same. RISC-V edk2 firmware solution uses OpenSBI as the library. Thus we don't have to mention specific firmware solution in UEFI spec.
I think the final sentence already covered all use cases you mentioned
above, that includes the EFI POST time and the UEFI service exposed to user such as EFI boot service and EFI runtime service. We don’t have to mention specific rule in the spec. I revised it again and add EFI Management Mode service.
My references to U-Boot where not meant for inclusion in any spec but as background information only.
"Registers tp and gp are unallocatable and not preserved across the
function calls, UEFI firmware implementation of RISC-V platform should keep the values in these two registers intact during entire UEFI firmware boot process, EFI boot services, EFI runtime services and EFI management mode services. See “Link to UEFI Specification-Related Document” on https://uefi.org/uefi under the heading “RISC-V EFL psABI Specification” for the more descriptions of RISC-V calling convention."
Please, have a look at RFC 2119 "Key words for use in RFCs to Indicate Requirement Levels" [INVALID URI REMOVED 3A__tools.ietf.org_html_rfc2119&d=DwIFaQ&c=C5b8zRQO1miGmBeVZ2LFW g&r=_SN6FZBN4Vgi4Ulkskz6qU3NYRO03nHp9P7Z5q59A3E&m=M_APpMPr8z v5FK0ys5Noq10akQQqL0eNc9vlZqmOkpw&s=DBCkr05bpuKrQWdyNn5bJSow sLV7UDvDJIJc3nT4jd0&e= ]. Here "should" has the meaning of "recommended" and may be ignored "in particular circumstances".
Did you mean SHOULD or MUST?
"are unallocatable" is vague. It does not describe who is not allowed to change the values. Is it the firmware or is it the payload?
"keep the values intact" is vague. It could mean that the firmware SHOULD reset gp and tp to the values they had had before StartImage() whenever an API call is made.
We need a definition that cannot be misunderstood. In my definition it is at least clear who is the owner of tp and gp.
Please, consider that before ExitBootServices() many different payloads may be loaded by the firmware: applications, boot service drivers, runtime service drivers. This is why to me it does not make sense to allow any other software but the firmware to define the values of tp and gp before ExitBootServices().
Best regards
Heinrich
> because signal handlers may rely upon their values. See “Link to > UEFI Specification-Related Document” on https://uefi.org/uefi > under the heading “RISC-V EFL psABI Specification” for the more > descriptions of RISC-V calling convention." > > > I will upload this update to USWG once Heinrich agrees with above. > >> >>>>> Due to this missing clarification U-Boot is currently saving >>>>> gp before calling the entry point of the payload and restores >>>>> it > on >>>>> reentry or on entry of an API call. Nothing is done for tp. >>>>>
boot-architecture mailing list boot-architecture@lists.linaro.org https://lists.linaro.org/mailman/listinfo/boot-architecture