On Mon, 31 Aug 2020 at 17:16, Ard Biesheuvel ardb@kernel.org wrote:
On Fri, 28 Aug 2020 at 19:03, Sughosh Ganu sughosh.ganu@linaro.org wrote:
hello Heinrich,
On Fri, 28 Aug 2020 at 20:24, Heinrich Schuchardt xypron.glpk@gmx.de wrote:
On 28.08.20 14:19, Grant Likely wrote:
On 28/08/2020 12:57, Sughosh Ganu wrote:
hi, I am currently working on adding support for the capsule
authentication
in the SetImage function of the efi firmware management protocol in u-boot. This work is part of adding functionality in u-boot for
firmware
updates using the uefi capsule format.
The capsule authentication is done using a public key stored as a
pkcs7
certificate. The uefi specification does not have any mention of how this certificate needs to be stored. This is unlike the case of the certificates used for image authentication when UEFI secure boot
feature
is enabled, where the certificates and hash values are stored as
part of
the authenticated variables like KEK, db, dbx.
I don't think it makes sense to store the capsule authentication in
the
KEK. PK and KEK is about the chain of trust between the platform
owner
and one of many OSes that may be run on the platform. In the case of
a
firmware update, it is an entirely different chain of trust. i.e. we don't trust 3rd party OS vendors to also provide replacement firmware images.
The capsule update public key should be kept separately. For
convenience
you could define another variable to hold that public key, but it
would
be worth checking with the TF-A folks. It might make sense for BL31
to
be the holder of that key.
g.
Can we use an authenticated variable like KEK to store the
certificate
used for authentication of the capsule payload. Would it make sense
to
have this mentioned in EBBR, or even the UEFI specification. Please
let
me know your thoughts. Thanks.
Takahiro was working with FIT images as the content of the capsules. U-Boot already has RSA signing for FIT images. Isn't that enough?
Cf. u-boot/doc/uImage.FIT/signature.txt
We do have the logic for verification of the signatures, and I have used the same code for capsule authentication, which has been introduced by Takahiro for image authentication. My question was about storage of the public key certificate -- whether it should be stored as a normal uefi variable, or as an authenticated variable.
I agree with Grant here. The scopes of signed capsule update and UEFI secure boot are entirely disjoint, and so there is no reason for the sets of certificates to overlap either, especially because the scope of signed capsule update is much narrower (i.e., any OS loader from any OS vendor could potentially be installed on a given system, whereas only a single entity publishes firmware updates for it)
I'd like to see people's view on who signs what, in the following use case: - Car vendor A builds a car with tier1-1 and tier1-2 boards provided by silicon1 and silicon2. - TF-A, OP-TEE, SCMI-TA, U-Boot are provided by silicon1 for board1 and silicon2 for board2 - board1 is an android auto board and has a DRM TA on board1 provided by Netflix - board2 is an AGL board provided by tier1-2 Is the following correct? PK only cert should be issued by silicon1 and silicon2. KEK in board1 shall contain silicon1, android, Netflix certs KEK in board2 shall contain silicon2, tier1-2 certs DB shall contain the signatures of relevant images on each board. Shouldn't car vendor A have a way to insert itself in the chain of trust?