boot-architecture

boot-architecture@lists.linaro.org

1 participants
684 discussions

by François Ozog

Hi, next week agenda is: - Industrial Internet Consortium patterns update - Civil Infrastructure Project liaison update - Open System Firmware <https://www.opencompute.org/projects/open-system-firmware> presentation and discussion On this last topic, I'm glad to welcome Ron Minnich who will present Open System Firmware initiatives from Open Compute Project. (Ron has a long history in firmware with creation of CoreBoot and more recently LinuxBoot). SystemReady standards define technical requirements to ensure decoupling between firmware and operating systems. I see OSF efforts complementing the technical standards with firmware business lifecycle to guarantee openness and freedom of use. A checklist <https://www.opencompute.org/wiki/Open_System_Firmware/Checklist> helps qualify systems per those openness and freedom of use criteria. I'd like us to be able to have an informed discussion on the checklist (meaning need to read before the call ;-) to see how much it may apply to Trusted Substrate <http://trusted-substrate.org>, and wether it would make sense (if technically feasible) to setup a liaison between our two groups. Cordially, FF PS: I will be sending additional invites for new attendees -- François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* T: +33.67221.6485 francois.ozog(a)linaro.org | Skype: ffozog

5 years, 1 month

Firmware: Sustainability vs planned obsolescence

by François Ozog

Hi even though I am not an "ecology activist", sustainability is a topic dear to me. And it can translate into firmware world... So I am targeting this message to the audience of the two firmware communities I know and hope it is okay to do so. March 2021 was a big date for Open Source Firmware <https://www.opencompute.org/projects/open-system-firmware>: that was the deadline to get " Owners must be able to change firmware and share it -- including any binary components -- with other owners. Starting in March, 2021, OCP badging for servers will require that systems support OSF. " That's a big step towards sustainability in the OCP world. More generally, we should have the capacity to characterize firmware sustainability for post official firmware End Of Life. What about the following : level 0: system cannot evolve or be updated. level 1: the system can be updated to a bootable minimal functionality with open community effort.It may lack some features. For instance, you can still look at your TV but lose Netflix 4K because the owners (in OCP sense) cannot get a signed Netflix TA (either updated or not). level 2: the TAs and other binaries can be made available (signed) to the ones maintaining open source firmware projects (TF-A, OP-TEE, U-Boot...). For instance, owners (in the OCP sense) can get the updated Netflix TA binary (updated or not) and sign it for inclusion. level 3: all firmware components are open source and can thus be community maintained. I think : Level 2 is the right balance between business value and "ecological" goal of sustainability. Level 3 is not mandatory and not the ultimate goal. Is this a good way to characterize sustainability? How to make at least level 2 happen ? Cheers FF -- François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* T: +33.67221.6485 francois.ozog(a)linaro.org | Skype: ffozog

5 years, 1 month

Re: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages

by Manish Pandey2

Hi, From TF-A project point of view, we prefer to use existing mechanism to pass parameters across boot stages using linked list of tagged elements (as suggested by Julius). It has support for both generic and SiP-specific tags. Having said that, it does not stop partners to introduce new mechanisms suitable for their usecase in platform port initially and later move to generic code if its suitable for other platforms. To start with, Ampere can introduce a platform specific implementation of memory tag(speed/NUMA topology etc) which can be evaluated and discussed for generalization in future. The tag will be populated in BL2 stage and can be forwarded to further stages(and to BL33) by passing the head of list pointer in one of the registers. Initially any register can be used but going forward a standardization will be needed. The U-boot bloblist mentioned by Simon is conceptually similar to what TF-A is using, if there is consensus of using bloblist/taglist then TF-A tag list may be enhanced to take best of both the implementations. One of the potential problems of having structure used in different projects is maintainability, this can be avoided by having a single copy of these structures in TF-A (kept inside "include/export" which intended to be used by other projects.) Regarding usage of either UUID or tag, I echo the sentiments of Simon and Julius to keep it simple and use tag values. Looking forward to having further discussions on zoom call today. Thanks Manish P ________________________________ From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> on behalf of Julius Werner via TF-A <tf-a(a)lists.trustedfirmware.org> Sent: 25 March 2021 02:43 To: Simon Glass <sjg(a)chromium.org> Cc: Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com>; Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org>; tf-a(a)lists.trustedfirmware.org <tf-a(a)lists.trustedfirmware.org>; U-Boot Mailing List <u-boot(a)lists.denx.de>; Paul Isaac's <paul.isaacs(a)linaro.org>; Ron Minnich <rminnich(a)google.com> Subject: Re: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages Just want to point out that TF-A currently already supports a (very simple) mechanism like this: https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… It's just a linked list of tagged elements. The tag space is split into TF-A-wide generic tags and SiP-specific tags (with plenty of room to spare if more areas need to be defined -- a 64-bit tag can fit a lot). This is currently being used by some platforms that run coreboot in place of BL1/BL2, to pass information from coreboot (BL2) to BL31. I would echo Simon's sentiment of keeping this as simple as possible and avoiding complicated and bloated data structures with UUIDs. You usually want to parse something like this as early as possible in the passed-to firmware stage, particularly if the structure encodes information about the debug console (like it does for the platforms I mentioned above). For example, in BL31 this basically means doing it right after moving from assembly to C in bl31_early_platform_setup2() to get the console up before running anything else. At that point in the BL31 initialization, the MMU and caches are disabled, so data accesses are pretty expensive and you don't want to spend a lot of parsing effort or calculate complicated checksums or the like. You just want something extremely simple where you ideally have to touch every data word only once. On Wed, Mar 24, 2021 at 5:06 PM Simon Glass via TF-A <tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org>> wrote: Hi Harb, On Wed, 24 Mar 2021 at 11:39, Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com<mailto:abdulhamid@os.amperecomputing.com>> wrote: Hello Folks, Appreciate the feedback and replies on this. Glad to see that there is interest in this topic. 😊 I try to address the comments/feedback from Francois and Simon below…. @François Ozog<mailto:francois.ozog@linaro.org> – happy to discuss this on a zoom call. I will make that time slot work, and will be available to attend April 8, 4pm CT. Note that I’m using the term “HOB” here more generically, as there are typically vendor specific structures beyond the resource descriptor HOB, which provides only a small subset of the information that needs to be passed between the boot phases. The whole point here is to provide mechanism to develop firmware that we can build ARM Server SoC’s that support *any* BL33 payload (e.g. EDK2, AptioV, CoreBoot, and maybe even directly boot strapping LinuxBoot at some point). In other-words, we are trying to come up with a TF-A that would be completely agnostic to the implementation of BL33 (i.e. BL33 is built completely independently by a separate entity – e.g. an ODM/OEM). Keep in mind, in the server/datacenter market segment we are not building vertically integrated systems with a single entity compiling firmware/software stacks like most folks in TF-A have become use to. There are two categories of higher level firmware code blobs in the server/datacenter model: 1. “SoC” or “silicon” firmware – in TF-A this may map to BL1, BL2, BL31, and *possibly* one or more BL32 instances 2. “Platform” or “board” firmware – in TF-A this may map to BL33 and *possibly* one or more BL32 instances. Even the platform firmware stack could be further fragmented by having multiple entities involved in delivering the entire firmware stack: IBVs, ODMs, OEMs, CSPs, and possibly even device vendor code. To support a broad range of platform designs with a broad range of memory devices, we need a crisp and clear contract between the SoC firmware that initializes memory (e.g. BL2) and how that platform boot firmware (e.g. BL33) gathers information about what memory that was initialized, at what speeds, NUMA topology, and many other relevant information that needs to be known and comprehended by the platform firmware and eventually by the platform software. I understand the versatility of DT, but I see two major problems with DT: * DT requires more complicated parsing to get properties, and even more complex to dynamically set properties – this HOB structures may need to be generated in boot phases where DDR is not available, and therefore we will be extremely memory constrained. * DT is probably overkill for this purpose – We really just want a list of pointers to simple C structures that code cast (e.g. JEDEC SPD data blob) I think that we should not mix the efforts around DT/ACPI specs with what we are doing here, because those specs and concepts were developed for a completely different purpose (i.e. abstractions needed for OS / RTOS software, and not necessarily suitable for firmware-to-firmware hand-offs). Frankly, I would personally push back pretty hard on defining SMC’s for something that should be one way information passing. Every SMC we add is another attack vector to the secure world and an increased burden on the folks that have to do security auditing and threat analysis. I see no benefit in exposing these boot/HOB/BOB structures at run-time via SMC calls. Please do let me know if you disagree and why. Look forward to discussing on this thread or on the call. @Simon Glass<mailto:sjg@chromium.org> - Thanks for the pointer to bloblist. I briefly reviewed and it seems like a good baseline for what we may be looking for. That being said, I would say that there is some benefit in having some kind of unique identifiers (e.g. UUID or some unique signature) so that we can tie standardized data structures (based on some future TBD specs) to a particular ID. For example, if the TPM driver in BL33 is looking for the TPM structure in the HOB/BOB list, and may not care about the other data blobs. The driver needs a way to identify and locate the blob it cares about. The tag is intended to serve that purpose, although perhaps it should switch from an auto-allocating enum to one with explicit values for each entry and a range for 'local' use. I guess we can achieve this with the tag, but the problem with tag when you have eco-system with a lot of parties doing parallel development, you can end up with tag collisions and folks fighting about who has rights to what tag values. We would need some official process for folks to register tags for whatever new structures we define, or maybe some tag range for vendor specific structures. This comes with a lot of pain and bureaucracy. On the other hand, UUID has been a proven way to make it easy to just define your own blobs with *either* standard or vendor specific structures without worry of ID collisions between vendors. True. I think the pain is overstated, though. In this case I think we actually want something that can be shared between projects and orgs, so some amount of coordination could be considered a benefit. It could just be a github pull request. I find the UUID unfriendly and not just to code size and eyesight! Trying to discover what GUIDs mean or are valid is quite tricky. E.g. see this code: #define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \ EFI_GUID(0xd038747c, 0xd00c, 0x4980, \ 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55) (etc.) static struct guid_name { efi_guid_t guid; const char *name; } guid_name[] = { { FSP_HOB_RESOURCE_OWNER_TSEG_GUID, "TSEG" }, { FSP_HOB_RESOURCE_OWNER_FSP_GUID, "FSP" }, { FSP_HOB_RESOURCE_OWNER_SMM_PEI_SMRAM_GUID, "SMM PEI SMRAM" }, { FSP_NON_VOLATILE_STORAGE_HOB_GUID, "NVS" }, { FSP_VARIABLE_NV_DATA_HOB_GUID, "Variable NVS" }, { FSP_GRAPHICS_INFO_HOB_GUID, "Graphics info" }, { FSP_HOB_RESOURCE_OWNER_PCD_DATABASE_GUID1, "PCD database ea" }, { FSP_HOB_RESOURCE_OWNER_PCD_DATABASE_GUID2, "PCD database 9b" }, (never figured out what those two are) { FSP_HOB_RESOURCE_OWNER_PEIM_DXE_GUID, "PEIM Init DXE" }, { FSP_HOB_RESOURCE_OWNER_ALLOC_STACK_GUID, "Alloc stack" }, { FSP_HOB_RESOURCE_OWNER_SMBIOS_MEMORY_GUID, "SMBIOS memory" }, { {}, "zero-guid" }, {} }; static const char *guid_to_name(const efi_guid_t *guid) { struct guid_name *entry; for (entry = guid_name; entry->name; entry++) { if (!guidcmp(guid, &entry->guid)) return entry->name; } return NULL; } Believe it or not it took a fair bit of effort to find just that small list, with nearly every one in a separate doc, from memory. We can probably debate whether there is any value in GUID/UUID or not during the call… but again, boblist seems like a reasonable starting point as an alternative to HOB. Indeed. There is certainly value in both approaches. Regards, Simon Thanks, --Harb From: François Ozog <francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org>> Sent: Tuesday, March 23, 2021 10:00 AM To: François Ozog <francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org>>; Ron Minnich <rminnich(a)google.com<mailto:rminnich@google.com>>; Paul Isaac's <paul.isaacs(a)linaro.org<mailto:paul.isaacs@linaro.org>> Cc: Simon Glass <sjg(a)chromium.org<mailto:sjg@chromium.org>>; Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com<mailto:abdulhamid@os.amperecomputing.com>>; Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org<mailto:boot-architecture@lists.linaro.org>>; tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org> Subject: Re: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages +Ron Minnich<mailto:rminnich@google.com> +Paul Isaac's<mailto:paul.isaacs@linaro.org> Adding Ron and Paul because I think this interface should be also benefiting LinuxBoot efforts. On Tue, 23 Mar 2021 at 11:17, François Ozog via TF-A <tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org>> wrote: Hi, I propose we cover the topic at the next Trusted Substrate<https://collaborate.linaro.org/display/TS/Trusted+Substrate+Home> zoom call<https://linaro-org.zoom.us/j/94563644892> on April 8th 4pm CET. The agenda: ABI between non-secure firmware and the rest of firmware (EL3, S-EL1, S-EL2, SCP) to adapt hardware description to some runtime conditions. runtime conditions here relates to DRAM size and topology detection, secure DRAM memory carvings, PSCI and SCMI interface publishing. For additional background on existing metadata: UEFI Platform Initialization Specification Version 1.7<https://uefi.org/sites/default/files/resources/PI_Spec_1_7_final_Jan_2019.p…>, 5.5 Resource Descriptor HOB Out of the ResourceType we care about is EFI_RESOURCE_SYSTEM_MEMORY. This HOB lacks memory NUMA attachment or something that could be related to fill SRAT table for ACPI or relevant DT proximity domains. HOB is not consistent accros platforms: some platforms (Arm) lists memory from the booting NUMA node, other platforms (x86) lists all memory from all NUMA nodes. (At least this is the case on the two platforms I tested). There are two proposals to use memory structures from SPL/BLx up to the handover function (as defined in the Device Tree technical report<https://docs.google.com/document/d/1CLkhLRaz_zcCq44DLGmPZQFPbYHOC6nzPowaL0X…>) which can be U-boot (BL33 or just U-Boot in case of SPL/U-Boot scheme) or EDK2. I would propose we also discuss possibility of FF-A interface to actually query information or request actions to be done (this is a model actually used in some SoCs with proprietary SMC calls). Requirements (to be validated): - ACPI and DT hardware descriptions. - agnostic to boot framework (SPL/U-Boot, TF-A/U-Boot, TF-A/EDK2) - agnostic to boot framework (SPL/U-Boot, TF-A/U-Boot, TF-A/EDK2, TF-A/LinuxBoot) - at least allows complete DRAM description and "persistent" usage (reserved areas for secure world or other usages) - support secure world device assignment Cheers FF On Mon, 22 Mar 2021 at 19:56, Simon Glass <sjg(a)chromium.org<mailto:sjg@chromium.org>> wrote: Hi, Can I suggest using bloblist for this instead? It is lightweight, easier to parse, doesn't have GUIDs and is already used within U-Boot for passing info between SPL/U-Boot, etc. Docs here: https://github.com/u-boot/u-boot/blob/master/doc/README.bloblist Header file describes the format: https://github.com/u-boot/u-boot/blob/master/include/bloblist.h Full set of unit tests: https://github.com/u-boot/u-boot/blob/master/test/bloblist.c Regards, Simon On Mon, 22 Mar 2021 at 23:58, François Ozog <francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org>> wrote: > > +Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org<mailto:boot-architecture@lists.linaro.org>> > > standardization is very much welcomed here and need to accommodate a very > diverse set of situations. > For example, TEE OS may need to pass memory reservations to BL33 or > "capture" a device for the secure world. > > I have observed a number of architectures: > 1) pass information from BLx to BLy in the form of a specific object > 2) BLx called by BLy by a platform specific SMC to get information > 3) BLx called by BLy by a platform specific SMC to perform Device Tree > fixups > > I also imagined a standardized "broadcast" FF-A call so that any firmware > element can either provide information or "do something". > > My understanding of your proposal is about standardizing on architecture 1) > with the HOB format. > > The advantage of the HOB is simplicity but it may be difficult to implement > schemes such as pruning a DT because device assignment in the secure world. > > In any case, it looks feasible to have TF-A and OP-TEE complement the list > of HOBs to pass information downstream (the bootflow). > > It would be good to start with building the comprehensive list of > information that need to be conveyed between firmware elements: > > information. | authoritative entity | reporting entity | information > exchanged: > dram | TFA | TFA | > <format to be detailed, NUMA topology to build the SRAT table or DT > equivalent?> > PSCI | SCP | TFA? | > SCMI | SCP or TEE-OS | TFA? TEE-OS?| > secure SRAM | TFA. | TFA. | > secure DRAM | TFA? TEE-OS? | TFA? TEE-OS? | > other? | | > | > > Cheers > > FF > > > On Mon, 22 Mar 2021 at 09:34, Harb Abdulhamid OS via TF-A < > tf-a(a)lists.trustedfirmware.org<mailto:tf-a@lists.trustedfirmware.org>> wrote: > > > Hello Folks, > > > > > > > > I'm emailing to start an open discussion about the adoption of a concept > > known as "hand-off blocks" or HOB to become a part of the TF-A Firmware > > Framework Architecture (FFA). This is something that is a pretty major > > pain point when it comes to the adoption of TF-A in ARM Server SoC’s > > designed to enable a broad range of highly configurable datacenter > > platforms. > > > > > > > > > > > > What is a HOB (Background)? > > > > --------------------------- > > > > UEFI PI spec describes a particular definition for how HOB may be used for > > transitioning between the PEI and DXE boot phases, which is a good > > reference point for this discussion, but not necessarily the exact solution > > appropriate for TF-A. > > > > > > > > A HOB is simply a dynamically generated data structure passed in between > > two boot phases. This is information that was obtained through discovery > > and needs to be passed forward to the next boot phase *once*, with no API > > needed to call back (e.g. no call back into previous firmware phase is > > needed to fetch this information at run-time - it is simply passed one time > > during boot). > > > > > > > > There may be one or more HOBs passed in between boot phases. If there are > > more than one HOB that needs to be passed, this can be in a form of a "HOB > > table", which (for example) could be a UUID indexed array of pointers to > > HOB structures, used to locate a HOB of interest (based on UUID). In such > > cases, instead of passing a single HOB, the boot phases may rely on passing > > the pointer to the HOB table. > > > > > > > > This has been extremely useful concept to employ on highly configurable > > systems that must rely on flexible discovery mechanisms to initialize and > > boot the system. This is especially helpful when you have multiple > > > > > > > > > > > > Why do we need HOBs in TF-A?: > > > > ----------------------------- > > > > It is desirable that EL3 firmware (e.g. TF-A) built for ARM Server SoC in > > a way that is SoC specific *but* platform agnostic. This means that a > > single ARM SoC that a SiP may deliver to customers may provide a single > > TF-A binary (e.g. BL1, BL2, BL31) that could be used to support a broad > > range of platform designs and configurations in order to boot a platform > > specific firmware (e.g. BL33 and possibly even BL32 code). In order to > > achieve this, the platform configuration must be *discovered* instead of > > statically compiled as it is today in TF-A via device tree based > > enumeration. The mechanisms of discovery may differ broadly depending on > > the relevant industry standard, or in some cases may have rely on SiP > > specific discovery flows. > > > > > > > > For example: On server systems that support a broad range DIMM memory > > population/topologies, all the necessary information required to boot is > > fully discovered via standard JEDEC Serial Presence Detect (SPD) over an > > I2C bus. Leveraging the SPD bus, may platform variants could be supported > > with a single TF-A binary. Not only is this information required to > > initialize memory in early boot phases (e.g. BL2), the subsequent boot > > phases will also need this SPD info to construct a system physical address > > map and properly initialize the MMU based on the memory present, and where > > the memory may be present. Subsequent boot phases (e.g. BL33 / UEFI) may > > need to generate standard firmware tables to the operating systems, such as > > SMBIOS tables describing DIMM topology and various ACPI tables (e.g. SLIT, > > SRAT, even NFIT if NVDIMM's are present). > > > > > > > > In short, it all starts with a standardized or vendor specific discovery > > flow in an early boot stage (e.g. BL1/BL2), followed by the passing of > > information to the next boot stages (e.g. BL31/BL32/BL33). > > > > > > > > Today, every HOB may be a vendor specific structure, but in the future > > there may be benefit of defining standard HOBs. This may be useful for > > memory discovery, passing the system physical address map, enabling TPM > > measured boot, and potentially many other common HOB use-cases. > > > > > > > > It would be extremely beneficial to the datacenter market segment if the > > TF-A community would adopt this concept of information passing between all > > boot phases as opposed to rely solely on device tree enumeration. This is > > not intended to replace device tree, rather intended as an alternative way > > to describe the info that must be discovered and dynamically generated. > > > > > > > > > > > > Conclusion: > > > > ----------- > > > > We are proposing that the TF-A community begin pursuing the adoption of > > HOBs as a mechanism used for information exchange between each boot stage > > (e.g. BL1->BL2, BL2->BL31, BL31->BL32, and BL31->BL33)? Longer term we > > want to explore standardizing some HOB structures for the BL33 phase (e.g. > > UEFI HOB structures), but initially would like to agree on this being a > > useful mechanism used to pass information between each boot stage. > > > > > > > > Thanks, > > > > --Harb > > > > > > > > > > > > > > -- > > TF-A mailing list > > TF-A(a)lists.trustedfirmware.org<mailto:TF-A@lists.trustedfirmware.org> > > https://lists.trustedfirmware.org/mailman/listinfo/tf-a > > > > > -- > François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* > T: +33.67221.6485 > francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org> | Skype: ffozog > _______________________________________________ > boot-architecture mailing list > boot-architecture(a)lists.linaro.org<mailto:boot-architecture@lists.linaro.org> > https://lists.linaro.org/mailman/listinfo/boot-architecture -- [https://drive.google.com/a/linaro.org/uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&ex…] François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group T: +33.67221.6485 francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org> | Skype: ffozog -- TF-A mailing list TF-A(a)lists.trustedfirmware.org<mailto:TF-A@lists.trustedfirmware.org> https://lists.trustedfirmware.org/mailman/listinfo/tf-a -- [https://drive.google.com/a/linaro.org/uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&ex…] François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group T: +33.67221.6485 francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org> | Skype: ffozog -- TF-A mailing list TF-A(a)lists.trustedfirmware.org<mailto:TF-A@lists.trustedfirmware.org> https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years, 1 month

EBBR Biweekly cancelled for today

by Grant Likely

I'm cancelling today's EBBR biweekly as I don't have an agenda for today. From discussion at the last EBBR meeting, with EBBR v2 about to be released and not a lot of new content to discuss, future EBBR meetings will be more of a tech forum format. Please email me if there is a tech topic you want to discuss in the biweekly EBBR forum and I'll add it to the schedule which will start in 2 weeks time. g. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years, 1 month

Hand over blocks in SynQuacer SoC

by Masami Hiramatsu

Hello, Last week's meeting about HOBs for the DRAM information, I would like to give an example of the Socionext SynQuacer case. SynQuacer SoC is a bit unique SoC, it consists of 24xCA53(AP) + CM3(SCP), and it uses DIMM cards like PCs. Thus, when initializing the memory, it has to detect the DIMM and initialize it and notify the configuration to BL3X. The SynQuacer boots from SCP and runs SCP firmware on it. The SCP firmware initializes DDR memory and secure memory area. Since the SynQuacer has a GPIO (DIP switch) to enable or disable secure memory, secure memory is dynamically configurable. So, it has a vendor extension of SCMI call to pass that information. https://github.com/ARM-software/SCP-firmware/blob/master/product/synquacer/… When the TF-A is booted by SCP on AP, TF-A calls the SCMI and gets the DDR information, from which the secure memory area is removed. TF-A saved the information on an address, and EDK2 and U-Boot uses it (of course BL33 can issue the SCMI to get the information) [SCP fw] <-(SCMI)-> [TF-A] <-(memory*)-> [U-Boot/EDK2] * it will be updated to use SMC. - The SynQuacer doesn't use Devicetree to pass this information because EDK2 uses ACPI by default. - Secure memory information is not shared. that size and address are fixed in SCP-firmware, TF-A and OP-TEE. Thank you, -- Masami Hiramatsu

5 years, 1 month

Trusted Substrate architecture call: HandOverBlocks discussion

by François Ozog

Hi following a mail discussion on trusted-firmware A we will have a discussion on HOBs during this week's Trusted Substrate <http://trusted-substrate.org>architecture council call <https://linaro-org.zoom.us/j/94563644892>. In addition to mail thread, here is a deck <https://docs.google.com/presentation/d/1KyqkyqoGXHUynZSI2hRFBoO_P7sFwgUJWhj…> I'll use to start things up. Cheers FF -- François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* T: +33.67221.6485 francois.ozog(a)linaro.org | Skype: ffozog

5 years, 1 month

RE: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages

by raghu.ncstate＠icloud.com

Julius, Simon, It appears there are opinions you carry around UUID being complicated, bloated, code being an eyesore, parsing these lists early with MMU/Caches disabled, calculating checksums etc. While there is certainly a LOT of truth to those statements, these concerns need to be put into context and may not necessarily apply to all platforms running TF-A. Standardization and interoperability may be valued more on some platforms and some of the bloat and performance issues may be worth those tradeoffs. Some of these concerns may not even apply on powerful CPU’s and SoC’s with lots of memory. Also a quick grep for “uuid” in the TF-A repository shows that there is significant use of UUID’s for FIP, some SMC’s, secure partitions etc so use of UUID is not something new to TF-A. While there are many ways to solve the same problem, there are also potential dis-advantages to something like the mechanism pointed out below. For example, this is yet another solution to an already solved problem. If we use UEFI hob’s, the code and problem has been solved for decades and there is code re-use possible and that *potentially*(opinions may vary) is better for security as there have been eyes on it for long and is more stable.(I’m very aware UEFI is not the gold standard for security, but again, it is a blanket statement to say all UEFI code is bad). Does the method mentioned below allow you to create a dynamic list of arbitrary lengths and NOT lists of lengths decided at compile time? It appears that it is mainly being used on lists fixed at compile time. What about interoperability with UEFI? Coreboot is great for platforms/companies that use it but what about platforms that *must* use UEFI for various reasons? Do we need a conversion from the method below to a UEFI HOB if BL33 is UEFI? Clearly the solution below was tailored to coreboot. We can support multiple ways in the same code base through build and run time options and a platform should be free to make calls on whether the problems you mentioned below really apply or not. What is a pain to do(having co-ordination with multiple companies vs vendor defined tags/UUID’s) is also subjective and whether or not it is overstated is matter of opinion/context. I think it may be best to discuss this in the call and understand the requirements fully. It may turn out that what you have proposed below works anyway 😊 Thanks Raghu From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of Julius Werner via TF-A Sent: Wednesday, March 24, 2021 7:44 PM To: Simon Glass <sjg(a)chromium.org> Cc: Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com>; Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org>; tf-a(a)lists.trustedfirmware.org; U-Boot Mailing List <u-boot(a)lists.denx.de>; Paul Isaac's <paul.isaacs(a)linaro.org>; Ron Minnich <rminnich(a)google.com> Subject: Re: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages Just want to point out that TF-A currently already supports a (very simple) mechanism like this: https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/… It's just a linked list of tagged elements. The tag space is split into TF-A-wide generic tags and SiP-specific tags (with plenty of room to spare if more areas need to be defined -- a 64-bit tag can fit a lot). This is currently being used by some platforms that run coreboot in place of BL1/BL2, to pass information from coreboot (BL2) to BL31. I would echo Simon's sentiment of keeping this as simple as possible and avoiding complicated and bloated data structures with UUIDs. You usually want to parse something like this as early as possible in the passed-to firmware stage, particularly if the structure encodes information about the debug console (like it does for the platforms I mentioned above). For example, in BL31 this basically means doing it right after moving from assembly to C in bl31_early_platform_setup2() to get the console up before running anything else. At that point in the BL31 initialization, the MMU and caches are disabled, so data accesses are pretty expensive and you don't want to spend a lot of parsing effort or calculate complicated checksums or the like. You just want something extremely simple where you ideally have to touch every data word only once. On Wed, Mar 24, 2021 at 5:06 PM Simon Glass via TF-A <tf-a(a)lists.trustedfirmware.org <mailto:tf-a@lists.trustedfirmware.org> > wrote: Hi Harb, On Wed, 24 Mar 2021 at 11:39, Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com <mailto:abdulhamid@os.amperecomputing.com> > wrote: Hello Folks, Appreciate the feedback and replies on this. Glad to see that there is interest in this topic. 😊 I try to address the comments/feedback from Francois and Simon below…. <mailto:francois.ozog@linaro.org> @François Ozog – happy to discuss this on a zoom call. I will make that time slot work, and will be available to attend April 8, 4pm CT. Note that I’m using the term “HOB” here more generically, as there are typically vendor specific structures beyond the resource descriptor HOB, which provides only a small subset of the information that needs to be passed between the boot phases. The whole point here is to provide mechanism to develop firmware that we can build ARM Server SoC’s that support *any* BL33 payload (e.g. EDK2, AptioV, CoreBoot, and maybe even directly boot strapping LinuxBoot at some point). In other-words, we are trying to come up with a TF-A that would be completely agnostic to the implementation of BL33 (i.e. BL33 is built completely independently by a separate entity – e.g. an ODM/OEM). Keep in mind, in the server/datacenter market segment we are not building vertically integrated systems with a single entity compiling firmware/software stacks like most folks in TF-A have become use to. There are two categories of higher level firmware code blobs in the server/datacenter model: 1. “SoC” or “silicon” firmware – in TF-A this may map to BL1, BL2, BL31, and *possibly* one or more BL32 instances 2. “Platform” or “board” firmware – in TF-A this may map to BL33 and *possibly* one or more BL32 instances. Even the platform firmware stack could be further fragmented by having multiple entities involved in delivering the entire firmware stack: IBVs, ODMs, OEMs, CSPs, and possibly even device vendor code. To support a broad range of platform designs with a broad range of memory devices, we need a crisp and clear contract between the SoC firmware that initializes memory (e.g. BL2) and how that platform boot firmware (e.g. BL33) gathers information about what memory that was initialized, at what speeds, NUMA topology, and many other relevant information that needs to be known and comprehended by the platform firmware and eventually by the platform software. I understand the versatility of DT, but I see two major problems with DT: * DT requires more complicated parsing to get properties, and even more complex to dynamically set properties – this HOB structures may need to be generated in boot phases where DDR is not available, and therefore we will be extremely memory constrained. * DT is probably overkill for this purpose – We really just want a list of pointers to simple C structures that code cast (e.g. JEDEC SPD data blob) I think that we should not mix the efforts around DT/ACPI specs with what we are doing here, because those specs and concepts were developed for a completely different purpose (i.e. abstractions needed for OS / RTOS software, and not necessarily suitable for firmware-to-firmware hand-offs). Frankly, I would personally push back pretty hard on defining SMC’s for something that should be one way information passing. Every SMC we add is another attack vector to the secure world and an increased burden on the folks that have to do security auditing and threat analysis. I see no benefit in exposing these boot/HOB/BOB structures at run-time via SMC calls. Please do let me know if you disagree and why. Look forward to discussing on this thread or on the call. <mailto:sjg@chromium.org> @Simon Glass - Thanks for the pointer to bloblist. I briefly reviewed and it seems like a good baseline for what we may be looking for. That being said, I would say that there is some benefit in having some kind of unique identifiers (e.g. UUID or some unique signature) so that we can tie standardized data structures (based on some future TBD specs) to a particular ID. For example, if the TPM driver in BL33 is looking for the TPM structure in the HOB/BOB list, and may not care about the other data blobs. The driver needs a way to identify and locate the blob it cares about. The tag is intended to serve that purpose, although perhaps it should switch from an auto-allocating enum to one with explicit values for each entry and a range for 'local' use. I guess we can achieve this with the tag, but the problem with tag when you have eco-system with a lot of parties doing parallel development, you can end up with tag collisions and folks fighting about who has rights to what tag values. We would need some official process for folks to register tags for whatever new structures we define, or maybe some tag range for vendor specific structures. This comes with a lot of pain and bureaucracy. On the other hand, UUID has been a proven way to make it easy to just define your own blobs with *either* standard or vendor specific structures without worry of ID collisions between vendors. True. I think the pain is overstated, though. In this case I think we actually want something that can be shared between projects and orgs, so some amount of coordination could be considered a benefit. It could just be a github pull request. I find the UUID unfriendly and not just to code size and eyesight! Trying to discover what GUIDs mean or are valid is quite tricky. E.g. see this code: #define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \ EFI_GUID(0xd038747c, 0xd00c, 0x4980, \ 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55) (etc.) static struct guid_name { efi_guid_t guid; const char *name; } guid_name[] = { { FSP_HOB_RESOURCE_OWNER_TSEG_GUID, "TSEG" }, { FSP_HOB_RESOURCE_OWNER_FSP_GUID, "FSP" }, { FSP_HOB_RESOURCE_OWNER_SMM_PEI_SMRAM_GUID, "SMM PEI SMRAM" }, { FSP_NON_VOLATILE_STORAGE_HOB_GUID, "NVS" }, { FSP_VARIABLE_NV_DATA_HOB_GUID, "Variable NVS" }, { FSP_GRAPHICS_INFO_HOB_GUID, "Graphics info" }, { FSP_HOB_RESOURCE_OWNER_PCD_DATABASE_GUID1, "PCD database ea" }, { FSP_HOB_RESOURCE_OWNER_PCD_DATABASE_GUID2, "PCD database 9b" }, (never figured out what those two are) { FSP_HOB_RESOURCE_OWNER_PEIM_DXE_GUID, "PEIM Init DXE" }, { FSP_HOB_RESOURCE_OWNER_ALLOC_STACK_GUID, "Alloc stack" }, { FSP_HOB_RESOURCE_OWNER_SMBIOS_MEMORY_GUID, "SMBIOS memory" }, { {}, "zero-guid" }, {} }; static const char *guid_to_name(const efi_guid_t *guid) { struct guid_name *entry; for (entry = guid_name; entry->name; entry++) { if (!guidcmp(guid, &entry->guid)) return entry->name; } return NULL; } Believe it or not it took a fair bit of effort to find just that small list, with nearly every one in a separate doc, from memory. We can probably debate whether there is any value in GUID/UUID or not during the call… but again, boblist seems like a reasonable starting point as an alternative to HOB. Indeed. There is certainly value in both approaches. Regards, Simon Thanks, --Harb From: François Ozog <francois.ozog(a)linaro.org <mailto:francois.ozog@linaro.org> > Sent: Tuesday, March 23, 2021 10:00 AM To: François Ozog <francois.ozog(a)linaro.org <mailto:francois.ozog@linaro.org> >; Ron Minnich <rminnich(a)google.com <mailto:rminnich@google.com> >; Paul Isaac's <paul.isaacs(a)linaro.org <mailto:paul.isaacs@linaro.org> > Cc: Simon Glass <sjg(a)chromium.org <mailto:sjg@chromium.org> >; Harb Abdulhamid OS <abdulhamid(a)os.amperecomputing.com <mailto:abdulhamid@os.amperecomputing.com> >; Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org <mailto:boot-architecture@lists.linaro.org> >; tf-a(a)lists.trustedfirmware.org <mailto:tf-a@lists.trustedfirmware.org> Subject: Re: [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages +Ron Minnich <mailto:rminnich@google.com> +Paul Isaac's <mailto:paul.isaacs@linaro.org> Adding Ron and Paul because I think this interface should be also benefiting LinuxBoot efforts. On Tue, 23 Mar 2021 at 11:17, François Ozog via TF-A <tf-a(a)lists.trustedfirmware.org <mailto:tf-a@lists.trustedfirmware.org> > wrote: Hi, I propose we cover the topic at the next Trusted Substrate <https://collaborate.linaro.org/display/TS/Trusted+Substrate+Home> zoom call <https://linaro-org.zoom.us/j/94563644892> on April 8th 4pm CET. The agenda: ABI between non-secure firmware and the rest of firmware (EL3, S-EL1, S-EL2, SCP) to adapt hardware description to some runtime conditions. runtime conditions here relates to DRAM size and topology detection, secure DRAM memory carvings, PSCI and SCMI interface publishing. For additional background on existing metadata: <https://uefi.org/sites/default/files/resources/PI_Spec_1_7_final_Jan_2019.p…> UEFI Platform Initialization Specification Version 1.7, 5.5 Resource Descriptor HOB Out of the ResourceType we care about is EFI_RESOURCE_SYSTEM_MEMORY. This HOB lacks memory NUMA attachment or something that could be related to fill SRAT table for ACPI or relevant DT proximity domains. HOB is not consistent accros platforms: some platforms (Arm) lists memory from the booting NUMA node, other platforms (x86) lists all memory from all NUMA nodes. (At least this is the case on the two platforms I tested). There are two proposals to use memory structures from SPL/BLx up to the handover function (as defined in the Device Tree technical report <https://docs.google.com/document/d/1CLkhLRaz_zcCq44DLGmPZQFPbYHOC6nzPowaL0X…> ) which can be U-boot (BL33 or just U-Boot in case of SPL/U-Boot scheme) or EDK2. I would propose we also discuss possibility of FF-A interface to actually query information or request actions to be done (this is a model actually used in some SoCs with proprietary SMC calls). Requirements (to be validated): - ACPI and DT hardware descriptions. - agnostic to boot framework (SPL/U-Boot, TF-A/U-Boot, TF-A/EDK2) - agnostic to boot framework (SPL/U-Boot, TF-A/U-Boot, TF-A/EDK2, TF-A/LinuxBoot) - at least allows complete DRAM description and "persistent" usage (reserved areas for secure world or other usages) - support secure world device assignment Cheers FF On Mon, 22 Mar 2021 at 19:56, Simon Glass <sjg(a)chromium.org <mailto:sjg@chromium.org> > wrote: Hi, Can I suggest using bloblist for this instead? It is lightweight, easier to parse, doesn't have GUIDs and is already used within U-Boot for passing info between SPL/U-Boot, etc. Docs here: https://github.com/u-boot/u-boot/blob/master/doc/README.bloblist Header file describes the format: https://github.com/u-boot/u-boot/blob/master/include/bloblist.h Full set of unit tests: https://github.com/u-boot/u-boot/blob/master/test/bloblist.c Regards, Simon On Mon, 22 Mar 2021 at 23:58, François Ozog <francois.ozog(a)linaro.org <mailto:francois.ozog@linaro.org> > wrote: > > +Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org <mailto:boot-architecture@lists.linaro.org> > > > standardization is very much welcomed here and need to accommodate a very > diverse set of situations. > For example, TEE OS may need to pass memory reservations to BL33 or > "capture" a device for the secure world. > > I have observed a number of architectures: > 1) pass information from BLx to BLy in the form of a specific object > 2) BLx called by BLy by a platform specific SMC to get information > 3) BLx called by BLy by a platform specific SMC to perform Device Tree > fixups > > I also imagined a standardized "broadcast" FF-A call so that any firmware > element can either provide information or "do something". > > My understanding of your proposal is about standardizing on architecture 1) > with the HOB format. > > The advantage of the HOB is simplicity but it may be difficult to implement > schemes such as pruning a DT because device assignment in the secure world. > > In any case, it looks feasible to have TF-A and OP-TEE complement the list > of HOBs to pass information downstream (the bootflow). > > It would be good to start with building the comprehensive list of > information that need to be conveyed between firmware elements: > > information. | authoritative entity | reporting entity | information > exchanged: > dram | TFA | TFA | > <format to be detailed, NUMA topology to build the SRAT table or DT > equivalent?> > PSCI | SCP | TFA? | > SCMI | SCP or TEE-OS | TFA? TEE-OS?| > secure SRAM | TFA. | TFA. | > secure DRAM | TFA? TEE-OS? | TFA? TEE-OS? | > other? | | > | > > Cheers > > FF > > > On Mon, 22 Mar 2021 at 09:34, Harb Abdulhamid OS via TF-A < > tf-a(a)lists.trustedfirmware.org <mailto:tf-a@lists.trustedfirmware.org> > wrote: > > > Hello Folks, > > > > > > > > I'm emailing to start an open discussion about the adoption of a concept > > known as "hand-off blocks" or HOB to become a part of the TF-A Firmware > > Framework Architecture (FFA). This is something that is a pretty major > > pain point when it comes to the adoption of TF-A in ARM Server SoC’s > > designed to enable a broad range of highly configurable datacenter > > platforms. > > > > > > > > > > > > What is a HOB (Background)? > > > > --------------------------- > > > > UEFI PI spec describes a particular definition for how HOB may be used for > > transitioning between the PEI and DXE boot phases, which is a good > > reference point for this discussion, but not necessarily the exact solution > > appropriate for TF-A. > > > > > > > > A HOB is simply a dynamically generated data structure passed in between > > two boot phases. This is information that was obtained through discovery > > and needs to be passed forward to the next boot phase *once*, with no API > > needed to call back (e.g. no call back into previous firmware phase is > > needed to fetch this information at run-time - it is simply passed one time > > during boot). > > > > > > > > There may be one or more HOBs passed in between boot phases. If there are > > more than one HOB that needs to be passed, this can be in a form of a "HOB > > table", which (for example) could be a UUID indexed array of pointers to > > HOB structures, used to locate a HOB of interest (based on UUID). In such > > cases, instead of passing a single HOB, the boot phases may rely on passing > > the pointer to the HOB table. > > > > > > > > This has been extremely useful concept to employ on highly configurable > > systems that must rely on flexible discovery mechanisms to initialize and > > boot the system. This is especially helpful when you have multiple > > > > > > > > > > > > Why do we need HOBs in TF-A?: > > > > ----------------------------- > > > > It is desirable that EL3 firmware (e.g. TF-A) built for ARM Server SoC in > > a way that is SoC specific *but* platform agnostic. This means that a > > single ARM SoC that a SiP may deliver to customers may provide a single > > TF-A binary (e.g. BL1, BL2, BL31) that could be used to support a broad > > range of platform designs and configurations in order to boot a platform > > specific firmware (e.g. BL33 and possibly even BL32 code). In order to > > achieve this, the platform configuration must be *discovered* instead of > > statically compiled as it is today in TF-A via device tree based > > enumeration. The mechanisms of discovery may differ broadly depending on > > the relevant industry standard, or in some cases may have rely on SiP > > specific discovery flows. > > > > > > > > For example: On server systems that support a broad range DIMM memory > > population/topologies, all the necessary information required to boot is > > fully discovered via standard JEDEC Serial Presence Detect (SPD) over an > > I2C bus. Leveraging the SPD bus, may platform variants could be supported > > with a single TF-A binary. Not only is this information required to > > initialize memory in early boot phases (e.g. BL2), the subsequent boot > > phases will also need this SPD info to construct a system physical address > > map and properly initialize the MMU based on the memory present, and where > > the memory may be present. Subsequent boot phases (e.g. BL33 / UEFI) may > > need to generate standard firmware tables to the operating systems, such as > > SMBIOS tables describing DIMM topology and various ACPI tables (e.g. SLIT, > > SRAT, even NFIT if NVDIMM's are present). > > > > > > > > In short, it all starts with a standardized or vendor specific discovery > > flow in an early boot stage (e.g. BL1/BL2), followed by the passing of > > information to the next boot stages (e.g. BL31/BL32/BL33). > > > > > > > > Today, every HOB may be a vendor specific structure, but in the future > > there may be benefit of defining standard HOBs. This may be useful for > > memory discovery, passing the system physical address map, enabling TPM > > measured boot, and potentially many other common HOB use-cases. > > > > > > > > It would be extremely beneficial to the datacenter market segment if the > > TF-A community would adopt this concept of information passing between all > > boot phases as opposed to rely solely on device tree enumeration. This is > > not intended to replace device tree, rather intended as an alternative way > > to describe the info that must be discovered and dynamically generated. > > > > > > > > > > > > Conclusion: > > > > ----------- > > > > We are proposing that the TF-A community begin pursuing the adoption of > > HOBs as a mechanism used for information exchange between each boot stage > > (e.g. BL1->BL2, BL2->BL31, BL31->BL32, and BL31->BL33)? Longer term we > > want to explore standardizing some HOB structures for the BL33 phase (e.g. > > UEFI HOB structures), but initially would like to agree on this being a > > useful mechanism used to pass information between each boot stage. > > > > > > > > Thanks, > > > > --Harb > > > > > > > > > > > > > > -- > > TF-A mailing list > > TF-A(a)lists.trustedfirmware.org <mailto:TF-A@lists.trustedfirmware.org> > > https://lists.trustedfirmware.org/mailman/listinfo/tf-a > > > > > -- > François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* > T: +33.67221.6485 > francois.ozog(a)linaro.org <mailto:francois.ozog@linaro.org> | Skype: ffozog > _______________________________________________ > boot-architecture mailing list > boot-architecture(a)lists.linaro.org <mailto:boot-architecture@lists.linaro.org> > https://lists.linaro.org/mailman/listinfo/boot-architecture -- <https://drive.google.com/a/linaro.org/uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&ex…> François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group T: +33.67221.6485 <mailto:francois.ozog@linaro.org> francois.ozog(a)linaro.org | Skype: ffozog -- TF-A mailing list TF-A(a)lists.trustedfirmware.org <mailto:TF-A@lists.trustedfirmware.org> https://lists.trustedfirmware.org/mailman/listinfo/tf-a -- <https://drive.google.com/a/linaro.org/uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&ex…> François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group T: +33.67221.6485 <mailto:francois.ozog@linaro.org> francois.ozog(a)linaro.org | Skype: ffozog -- TF-A mailing list TF-A(a)lists.trustedfirmware.org <mailto:TF-A@lists.trustedfirmware.org> https://lists.trustedfirmware.org/mailman/listinfo/tf-a

5 years, 1 month

Glitching protection

by François Ozog

Hi Trusted Firmware M recently introduced protection against glitching at key decision points: https://github.com/mcu-tools/mcuboot/pull/776 To me this is a key mitigation element for companies that target PSA level 3 compliance which means hardware attacks resilience. I believe similar techniques need to be used in different projects involved in Linux secure booting (TF-A, OP-TEE, U-Boot, Linux kernel). Are there any efforts planned around this ? Is it feasible to have a "library" that could be integrated in different projects? Cheers FF

5 years, 1 month

RE: [TF-A] Firmware FuSa workshop

by Miklos Balint

To += op-tee(a)lists.trustedfirmware.org<mailto:op-tee@lists.trustedfirmware.org> From: TF-A <tf-a-bounces(a)lists.trustedfirmware.org> On Behalf Of François Ozog via TF-A Sent: 26 March 2021 19:08 To: Heinrich Schuchardt <xypron.glpk(a)gmx.de> Cc: tf-a(a)lists.trustedfirmware.org; Boot Architecture Mailman List <boot-architecture(a)lists.linaro.org>; Ilias Apalodimas <ilias.apalodimas(a)linaro.org> Subject: Re: [TF-A] Firmware FuSa workshop Le ven. 26 mars 2021 à 18:42, Heinrich Schuchardt <xypron.glpk(a)gmx.de<mailto:xypron.glpk@gmx.de>> a écrit : On 26.03.21 16:05, François Ozog wrote: > Hi, > > > Linaro is conducting an opportunity assessment to make OP-TEE ready for > functional safety sensitive environments. The goal is to present a plan to > Linaro members by the end of July 2021. > > The scope of the research is somewhat bigger because we can’t think of > OP-TEE without thinking of Trusted Firmware and Hafnium. The plan will > though not address those (unless we recognize we have to). We don’t think > U-Boot shall be part of the picture but we are welcoming contradictory > points of views. Hello François, Some boards boot via SPL->TF-A->U-Boot. Here U-Boot's SPL is relevant for OP-TEE's security. U-Boot can save variables via OP-TEE (implemented by Ilias). In this case OP-TEE has an implication on secure boot. I fully understand that these scenarios are not in the focus of the workshop. it may if companies have this particular flow in mind for safety certification. Our goal is not to make all boot flows safety ready but to identify which ones we need to consider. And the workshop may help in this identification. Best regards Heinrich > > We are organizing a 2 hours workshop on April 15th 9am CET to mostly hear > about use cases and ideas about Long Term Support requirements . We will > present the state of the research. > > The first use case is booting a safety certified type-1 hypervisor (open > source or commercial is irrelevant). > > But we know there are many more: please be ready to contribute. > > We think of more radical use cases: a safety payload is actually loaded as > a Secure Partition on top of Hafnium with OP-TEE or Zephyr used as a device > backends. In other words, Trust Zone hosts both safety and security worlds > , EL3 being the « software root of trust » pivot world. In those cases, > some cores never go out of secure state… > > > Agenda (to be refined) > > - > > Vision > - > > State of the research > <https://docs.google.com/presentation/u/0/d/1jWqu39gCF-5XzbFkodXsiVNJJLUN88B…> > - > > Use cases discussion > - > > What is the right scope? > - > > “Who do what” discussion (LTS, archiving...) > - > > Safety personnel (Linaro and contractors) discussion > - > > Other considerations from participants? > - > > Community organizations and funding? > - > > Closing and next steps > > > Should you want to participate and have not yet received an invite, please > contact me directly. > > Cordially, > > François-Frédéric > > PS: Please reach out should you want another date with a time compatible > with more time zones. This alternate date is not guaranteed though. > > -- [https://drive.google.com/a/linaro.org/uc?id=0BxTAygkus3RgQVhuNHMwUi1mYWc&ex…] François-Frédéric Ozog | Director Linaro Edge & Fog Computing Group T: +33.67221.6485 francois.ozog(a)linaro.org<mailto:francois.ozog@linaro.org> | Skype: ffozog

5 years, 1 month

Firmware FuSa workshop

by François Ozog

Hi, Linaro is conducting an opportunity assessment to make OP-TEE ready for functional safety sensitive environments. The goal is to present a plan to Linaro members by the end of July 2021. The scope of the research is somewhat bigger because we can’t think of OP-TEE without thinking of Trusted Firmware and Hafnium. The plan will though not address those (unless we recognize we have to). We don’t think U-Boot shall be part of the picture but we are welcoming contradictory points of views. We are organizing a 2 hours workshop on April 15th 9am CET to mostly hear about use cases and ideas about Long Term Support requirements . We will present the state of the research. The first use case is booting a safety certified type-1 hypervisor (open source or commercial is irrelevant). But we know there are many more: please be ready to contribute. We think of more radical use cases: a safety payload is actually loaded as a Secure Partition on top of Hafnium with OP-TEE or Zephyr used as a device backends. In other words, Trust Zone hosts both safety and security worlds , EL3 being the « software root of trust » pivot world. In those cases, some cores never go out of secure state… Agenda (to be refined) - Vision - State of the research <https://docs.google.com/presentation/u/0/d/1jWqu39gCF-5XzbFkodXsiVNJJLUN88B…> - Use cases discussion - What is the right scope? - “Who do what” discussion (LTS, archiving...) - Safety personnel (Linaro and contractors) discussion - Other considerations from participants? - Community organizations and funding? - Closing and next steps Should you want to participate and have not yet received an invite, please contact me directly. Cordially, François-Frédéric PS: Please reach out should you want another date with a time compatible with more time zones. This alternate date is not guaranteed though. -- François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* T: +33.67221.6485 francois.ozog(a)linaro.org | Skype: ffozog

5 years, 2 months

← Newer
1
...
21
22
23
24
25
26
27
...
69
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

boot-architecture