boot-architecture

boot-architecture@lists.linaro.org

1 participants
684 discussions

by Ryan Harkin

Hi all, The uefi-next.git tree [1] has been updated for the 13.09 cycle. We're at -rc1, but the code freeze is today, so probably not enough time for any changes before the release. Snapshot binaries are available now [2] What's included? Well, not as much as I hoped because I've run out of time. So no ethernet and no SMBIOS patches just yet. Current topic branches: linaro-topic-a5 linaro-topic-a9 linaro-topic-arndale linaro-topic-bds linaro-topic-fvp linaro-topic-misc linaro-topic-origen linaro-topic-panda linaro-topic-tc1 linaro-topic-tc2 As always, you should probably pull and build the "linaro-tracking" branch, not one of the topic branches. The main addition for this release is the (now) upstream aarch64 support. The uefi_rtsm-ve-aemv8.bin snapshot binary will boot on the Aarch64 VE model that is currently available to Linaro internal people from the usual place [4] I've tested A9, TC2, FVP on the snapshot binaries. I tested RTSMs, aarch64 VE model and Arndale on my own build of the code and Dave Long has tested Panda on his own build of the same code. One problem I note for aarch64 is that we don't have a similar fix to this for native building: 4511a19 2012-12-12 BaseTools: allow native building [Leif Lindholm] Probably not a big issue, who would want to compile aarch64 inside a model?? Regards, Ryan. [1] https://git.linaro.org/gitweb?p=arm/uefi/uefi-next.git;a=summary [2] https://snapshots.linaro.org/components/kernel/uefi-next/152 [3] https://snapshots.linaro.org/components/kernel/uefi-next/152/uefi_rtsm-ve-a… [4] https://collaborate.linaro.org/display/ITS/FlexLM+and+Fast+Models

12 years, 8 months

[PATCH] Only warn when freeing NULL pointer

by David Long

From: "David A. Long" <dave.long(a)linaro.org> Freeing a NULL pointer does not really have to be considered a fatal error. Signed-off-by: David A. Long <dave.long(a)linaro.org> --- MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c b/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c index 0ccb524..3333bc7 100644 --- a/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c +++ b/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c @@ -811,7 +811,10 @@ FreePool ( { EFI_STATUS Status; - Status = gBS->FreePool (Buffer); - ASSERT_EFI_ERROR (Status); + if (Buffer == NULL) { + DEBUG((EFI_D_WARN, "FreePool: attempt to free NULL pointer\n")); + } else { + Status = gBS->FreePool (Buffer); + ASSERT_EFI_ERROR (Status); + } } - -- 1.8.1.2

12 years, 8 months

[PATCH] Add new helper functions for Panda

by David Long

From: "David A. Long" <dave.long(a)linaro.org> Signed-off-by: David A. Long <dave.long(a)linaro.org> --- PandaBoardPkg/Library/PandaBoardLib/PandaBoardHelper.S | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/PandaBoardPkg/Library/PandaBoardLib/PandaBoardHelper.S b/PandaBoardPkg/Library/PandaBoardLib/PandaBoardHelper.S index 6405d16..49fcf53 100644 --- a/PandaBoardPkg/Library/PandaBoardLib/PandaBoardHelper.S +++ b/PandaBoardPkg/Library/PandaBoardLib/PandaBoardHelper.S @@ -23,6 +23,9 @@ GCC_ASM_EXPORT(ArmPlatformPrePiBootAction) GCC_ASM_EXPORT(ArmPlatformGetCorePosition) +GCC_ASM_EXPORT(ArmPlatformIsPrimaryCore) +GCC_ASM_EXPORT(ArmPlatformPeiBootAction) + /** ArmPlatformPrePiBootAction @@ -99,4 +102,18 @@ relocator_end: ASM_PFX(ArmPlatformGetCorePosition): bx lr +ASM_PFX(ArmPlatformIsPrimaryCore): + #Bits 8 through 11 are CPU ID + ldr r1, =0xf00 + and r0, r0, r1 + #id for core0 should be 0 + ldr r1, =0x0 + cmp r0, r1 + moveq r0, #1 + movne r0, #0 + mov pc, lr + +ASM_PFX(ArmPlatformPeiBootAction): + mov pc, lr + ASM_FUNCTION_REMOVE_IF_UNREFERENCED -- 1.8.1.2

12 years, 8 months

Having problem with booting panda!!!

by davidson mistral

Hi, I have checked out to the 2012.09.1 branch of the u-boot-linaro-stable source and built the u-boot for panda. It worked fine. Then I enabled the Debug prints and again built the u-boot. But this time the u-boot hanged up in the middle. In my observations, it hanged up at the end of the board_init_f() function in the arch/arm/lib/board.c. At the end it has the relocate_code() function that might cause the problem. Im stuck up with this and any help would be appreciated. Thanks, Davidson. K

12 years, 8 months

[PROPOSAL] ARM/FDT: passing multiple binaries to a kernel

by Andre Przywara

Hi, a normal Linux kernel currently supports reading the start and end address of a single binary blob via the FDT's /chosen node. This will be interpreted as the location of an initial RAM disk. The Xen hypervisor itself is a kernel, but needs up to _two_ binaries for proper operation: a Dom0 Linux kernel and it's associated initrd. On x86 this is solved via the multiboot protocol used by the Grub bootloader, which supports to pass an arbitrary number of binary modules to any kernel. Since in the ARM world we have the versatile device tree, we don't need to implement the mulitboot protocol. So I'd like to propose a new binding which denotes binary modules a kernel can use at it's own discretion. The need is triggered by the Xen hypervisor (which already uses a very similar scheme), but the approach is deliberately chosen to be as generic as possible to allow future uses (like passing firmware blobs for devices or the like). Credits for this go to Ian Campbell, who started something very similar [1] for the Xen hypervisor. The intention of this proposal is to make this generic and publicly documented. Looking forward to any comments! Thanks, Andre. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/arm/device-tree… ---------------------------- * Multiple boot modules device tree bindings Boot loaders wanting to pass multiple additional binaries to a kernel shall add a node "module" for each binary blob under the /chosen node with the following properties: - compatible: compatible = "boot,module"; A bootloader may add names to more specifically describe the module, e.g. Xen may use "xen,dom0-kernel" or "xen,dom0-ramdisk". If possible a kernel should be able to use modules even without a descriptive naming, by enumerating them in order and using hard-coded meanings for each module (e.g. first is kernel, second is initrd). - reg: specifies the base physical address and size of a region in memory where the bootloader loaded the respective binary data to. - bootargs: An optional property describing arguments to use for this module. Could be a command line or configuration data. Example: /chosen { #size-cells = <0x1>; #address-cells = <0x1>; module@0 { compatible = "xen,linux-zimage", "xen,multiboot-module", "boot,module"; reg = <0x80000000 0x003dcff8>; bootargs = "console=hvc0 earlyprintk ro root=/dev/sda1 nosmp"; }; module@1 { compatible = "xen,linux-initrd", "xen,multiboot-module", "boot,module"; reg = <0x08000000 0x00123456>; }; ...

12 years, 8 months

Re: [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel

by Rob Herring

Adding Dennis for a distro perspective. On Wed, Sep 4, 2013 at 3:44 AM, Ian Campbell <Ian.Campbell(a)citrix.com> wrote: > On Tue, 2013-09-03 at 17:00 -0500, Rob Herring wrote: >> On Tue, Sep 3, 2013 at 10:53 AM, Andre Przywara >> <andre.przywara(a)linaro.org> wrote: >> > Hi, >> > >> > a normal Linux kernel currently supports reading the start and end address >> > of a single binary blob via the FDT's /chosen node. >> > This will be interpreted as the location of an initial RAM disk. >> > >> > The Xen hypervisor itself is a kernel, but needs up to _two_ binaries for >> > proper operation: a Dom0 Linux kernel and it's associated initrd. >> > On x86 this is solved via the multiboot protocol used by the Grub >> > bootloader, which supports to pass an arbitrary number of binary modules to >> > any kernel. >> > >> > Since in the ARM world we have the versatile device tree, we don't need to >> > implement the mulitboot protocol. >> >> But surely there would be some advantage of reuse by using the >> multi-boot protocol since Xen, grub, and OS tools already support it >> for x86. > > Multiboot is pretty x86 specific (although MB2 has a MIPS port) and > covers more stuff than we strictly require (e.g. on x86 it has > requirements around which processor mode you enter in, has paging > enabled etc). > >> > So I'd like to propose a new binding which denotes binary modules a kernel >> > can use at it's own discretion. >> > The need is triggered by the Xen hypervisor (which already uses a very >> > similar scheme), but the approach is deliberately chosen to be as generic as >> > possible to allow future uses (like passing firmware blobs for devices or >> > the like). >> > Credits for this go to Ian Campbell, who started something very similar [1] >> > for the Xen hypervisor. The intention of this proposal is to make this >> > generic and publicly documented. >> >> Can you describe how you see the boot flow working starting with OS >> installer writes kernel, initrd, xen and ??? to disk. > > Kernel and initrd are written to /boot in the usual way (probably from > kernel.deb or whatever). Xen would also normally come from a distro > package (also in /boot). > >> How does the bootloader know what to load? > > It's in the bootloader config, e.g. boot.scr or grub.cfg, which are > either hand written or produced by the distros tooling. > > grub on ARM could consume the same stanzas as are used by grub on x86 to > boot Xen (which are produced by update-grub): > echo 'Loading Xen 4.1-amd64 ...' > multiboot /xen-4.1-amd64.gz placeholder > echo 'Loading Linux 3.10-2-amd64 ...' > module /vmlinuz-3.10-2-amd64 placeholder root=/dev/mapper/disks-root ro resume=/dev/mapper/disks-swap quiet > echo 'Loading initial ramdisk ...' > module /initrd.img-3.10-2-amd64 > > Since there is no multiboot on ARM (and never will be) this is safe. > > If multiboot ever does come to ARM it will necessarily be multiboot2 > which uses a different keyword. Right, this is just a text file with a list of binaries. It is not really the multiboot spec. There is no reason for this part to be different for grub on ARM. There is a big advantage to reusing the distro side tooling. If there isn't really much reuse on the bootloader side, then I'm fine with a different bootloader to Xen interface. I would like to hear that from folks working on grub though. > For u-boot Andre has proposed some syntactic sugar over the "fdt" > command to make boot.scr more trivial to use. We would of course need to > implement support for using it in the relevant distro tools (but they > tend to be very distro/machine specific already, e.g. Debian's > flash-kernel) And being machine specific is a PITA. flash-kernel is certainly not something we want to expand on. There is not much love for boot.scr either. There is work to address what are not really machine differences, but largely vendor u-boot differences: http://www.mail-archive.com/u-boot@lists.denx.de/msg119025.html One option for u-boot which already supports syslinux style menu files is to adopt the syslinux multiboot parsing support: http://www.syslinux.org/wiki/index.php/Doc/mboot We need to back-up and consider what this looks like in the end for all the pieces and get input from folks on grub, UEFI, and armv8. The UEFI answer may be this is a grub problem. For armv8, this proposal does match up well as the kernel boot interface for v8 is DT. Despite some claims, ACPI will not completely replace DT because of this. Rob

12 years, 8 months

Re: [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel

by Grant Likely

On Fri, 13 Sep 2013 12:22:13 +0100, Ian Campbell <Ian.Campbell(a)citrix.com> wrote: > On Fri, 2013-09-13 at 11:13 +0100, Grant Likely wrote: > > On Wed, Sep 4, 2013 at 5:41 PM, Rob Herring <robherring2(a)gmail.com> wrote: > > >> For u-boot Andre has proposed some syntactic sugar over the "fdt" > > >> command to make boot.scr more trivial to use. We would of course need to > > >> implement support for using it in the relevant distro tools (but they > > >> tend to be very distro/machine specific already, e.g. Debian's > > >> flash-kernel) > > > > > > And being machine specific is a PITA. flash-kernel is certainly not > > > something we want to expand on. There is not much love for boot.scr > > > either. There is work to address what are not really machine > > > differences, but largely vendor u-boot differences: > > > > > > http://www.mail-archive.com/u-boot@lists.denx.de/msg119025.html > > > > > > One option for u-boot which already supports syslinux style menu files > > > is to adopt the syslinux multiboot parsing support: > > > > > > http://www.syslinux.org/wiki/index.php/Doc/mboot > > > > Even building it into U-Boot is problematic because it leaves older > > machines out in the cold. Leif's port of Grub to U-Boot is far more > > interesting since the distro can now be in control of the code that > > loads the images and jumps into the kernel/hypervisor. > > AIUI this is not being developed any further? Last I checked the patches have been posted for merging, but it is stalled on the Grub maintainer. I believe he wanted to fix a bug on the raspberry pi before merging. Leif would know more. LEG isn't actively working on it anymore since UEFI is the priority, but I wouldn't call it abandoned. > > > We need to back-up and consider what this looks like in the end for > > > all the pieces and get input from folks on grub, UEFI, and armv8. The > > > UEFI answer may be this is a grub problem. For armv8, this proposal > > > does match up well as the kernel boot interface for v8 is DT. Despite > > > some claims, ACPI will not completely replace DT because of this. > > > > Yes, for UEFI it is absolutely an OS loader problem. UEFI provides an > > API and runtime environment. Grub is in general moving towards a boot > > menu system and a tool for loading images. Actual booting however > > should be done by a separate OS loader application. For Linux, this > > will be an in-kernel UEFI Stub. > > I'm not sure I follow your distinction between loading the images and > "actual booting". If grub loads the images and Linux stub does the > actual booting how does this stub locate the images which grub loaded? (Note: this isn't implemented yet, but is in progress) The DTB will need to be passed via the UEFI system table. Initrd is passed by modifying the dtb with linux,initrd-* properties in the device tree. In the Xen case, I think the original proposal is conceptually sound. I'll quibble about a couple of the details, but I'll address those with a reply to the original proposal. It makes perfect sense to use the same mechanism as the initrd properties to tell the kernel about additional blobs. > Or are you saying the stub should load the initramfs itself? How does it > know where to find it? Having the kernel in one config file (grub's) and > the initramfs in another (the Linux UEFI stub's) seems likely to result > in things getting out of sync. Having Linux's stub parse the grub CFG is > even less likely to work well IMHO. The stub has the ability to load both the dtb and initrd itself by adding "dtb=" and "initrd=" arguments, but it is currently limited to loading images from the same filesystem that the kernel was loaded from. GRUB (or gummiboot/refind/etc) is potentially more flexible. > > For Xen I would recommend taking the > > Linux EFI stub code and doing the same thing. There really isn't a > > need for a multiboot spec when you can rely on a runtime execution > > environment for setting things up exactly as you want them. > > If this works for Linux on EFI then I see no reason it could work for > Xen on EFI (assuming my questions above are just a result of my > misunderstanding something) > > But... Xen also wants to support non-server and therefore non-EFI > systems i.e. u-boot. We also want to support v7 where EFI is not a given > even for servers AIUI. I was only responding to the UEFI question, but that aside, I don't see a problem with adding properties to the DT for telling Xen where they are. > Given that I think it is a given that Xen will have some sort of > protocol along these lines, for use in these environments even if it > does the EFI stub thing on EFI systems. The question is shall we make it > more general and useful to others or just go our own way? I'd prefer to > do the former. Yes, make it general. GRUB and the EFI stub will use it. g.

12 years, 8 months

Panda UEFI link error

by David Long

I discovered a link problem with uefi-next when building for panda. Apparently a couple new functions need to be added to the platform-specific helper code for panda. As suggested by Leif I will reply with the patch. -dl

12 years, 8 months

Re: UEFI configuration on ARM VE TC2

by Sudeep KarkadaNagesha

Hi Vijay, On Wed, Sep 4, 2013 at 4:58 PM, Vijay Kilari <vijay.kilari(a)gmail.com> wrote: > Hi, > > I could now able to boot the kernel from MMC card with UEFI. > However, updating TC2 from u-boot to uefi, only one core is booting up. > Logs are below > > [ 70.779282] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 > [ 70.779321] Setting up static identity map for 0x804b85f0 - 0x804b8648 > [ 71.837336] CPU1: failed to boot: -38 > [ 72.841858] CPU2: failed to boot: -38 > [ 73.846383] CPU3: failed to boot: -38 > [ 74.850924] CPU4: failed to boot: -38 > [ 74.850958] Brought up 1 CPUs > One possible reason for this is the setting in firmware board.txt If you disable CONFIG_MCPM in kernel, you need to disable bit[12] of SCC: 0x700in board.txt to use the legacy/sysflag style of booting secondary cpus. Regards, Sudeep

12 years, 8 months

Re: UEFI configuration on ARM VE TC2

by Leif Lindholm

Hi Vijay, The Linaro boot-architecture mailing list is a better forum for questions about the Linaro UEFI releases. I have cc:d this email to that list. The reason you do not see TFTP boot as an option is that that is not yet released. We are hoping to do this shortly. It would probably be a good idea for us to mention that in the documentation. I do not recognise the other error message. / Leif On Mon, Sep 02, 2013 at 05:01:23PM +0530, Vijay Kilari wrote: > Hi Leif Lindholm, > > > I am changing to UEFI from u-boot on my TC2 board. > I have followed the step listed under "Firmware Update" tab from below link > http://releases.linaro.org/13.06/ubuntu/vexpress/ > > After reboot, I see that uefi fails to load kernel image with below log > > > The default boot selection will start in 1 seconds > ERROR: Did not find Linux kernel. > [1] Linaro image on SD card > - VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/uImage > - Initrd: > VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/uInitrd > - Arguments: console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 > rootwait ro androidboot.console=ttyAMA0 mmci.fmax=12000000 > - FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/v2p-ca15-tc2.dtb > - LoaderType: Linux kernel with Local FDT > ----------------------- > Global FDT Config > - VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/v2p-ca15-tc2.dtb > ----------------------- > [a] Boot Manager > [b] Shell > [c] Reboot > [d] Shutdown > Start: a > [1] Add Boot Device Entry > [2] Update Boot Device Entry > [3] Remove Boot Device Entry > [4] Update FDT path > [5] Return to main menu > Choice: 3 > [1] Linaro image on SD card > Delete entry: 1 > [1] Add Boot Device Entry > [2] Update Boot Device Entry > [3] Remove Boot Device Entry > [4] Update FDT path > [5] Return to main menu > Choice: 1 > [1] VenHw(E7223039-5836-41E1-B542-D7EC736C5E59) > [2] VenHw(02118005-9DA7-443A-92D5-781F022AEDBB) > [3] VenHw(1F15DA3C-37FF-4070-B471-BB4AF12A724A) > [4] VenHw(CC2CBF29-1498-4CDD-8171-F8B6B41D0909) > [5] VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82) > Select the Boot Device: > > > When I try to delete and add new boot entry, I dont see option for TFTP option > unlike it is mentioned in > > https://wiki.linaro.org/ARM/UEFI#Configuring_A5.2C_TC1_and_TC2 > > Can you please help me in configuring it?. > > In fact, when I try to add an entry, uefi asks for kernel start > address like below > > [1] Add Boot Device Entry > [2] Update Boot Device Entry > [3] Remove Boot Device Entry > [4] Update FDT path > [5] Return to main menu > Choice: 1 > [1] VenHw(E7223039-5836-41E1-B542-D7EC736C5E59) > [2] VenHw(02118005-9DA7-443A-92D5-781F022AEDBB) > [3] VenHw(1F15DA3C-37FF-4070-B471-BB4AF12A724A) > [4] VenHw(CC2CBF29-1498-4CDD-8171-F8B6B41D0909) > [5] VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82) > Select the Boot Device: 5 > Starting Address of the EFI Application or the kernel: > > What should be the address that I should give here?. Such information is not > available in the wiki page > > Thanks & Regards > Vijay

12 years, 8 months

← Newer
1
...
51
52
53
54
55
56
57
...
69
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

boot-architecture