Hi Masami,
Here are the instructions that I've been working on:
https://github.com/ARM-software/ebbr/wiki/EBBR-Testing-Guide https://github.com/ARM-software/ebbr/wiki/U-Boot-Configuration-Guide
I hope that helps
g.
On 12/05/2021 02:02, Masami Hiramatsu wrote:
Hello Grant and Vincent,
I'm interested in passing SCT on my board with the latest U-Boot. Would you know which CONFIG options are required for the SCT? I guess some CONFIG_EFI* options are related, but some of them may not be needed. Is there any good documentation about configuring U-Boot?
Thank you,
2021年5月10日(月) 22:36 Grant Likely grant.likely@arm.com:
For the EBBR meeting today:
Attached is the test result report from running a recent version of U-Boot on an iMX8 platform and parsed with the SCT_Parser tool.
g.
-------- Forwarded Message -------- Subject: Re: EBBR Testing topic for today? Date: Mon, 10 May 2021 14:22:56 +0100 From: Vincent Stehle Vincent.Stehle@arm.com To: Grant Likely Grant.Likely@arm.com
Hi Grant,
Here are some more SCT results: a run from this morning on Compulab, with latest firmware from Paul (+ 3 patches) and latest sct parser config.
INFO main: 0 dropped(s), 0 failure(s), 66 ignored(s), 10753 pass(s), 60 waived(s), 0 warning(s)
(The attached summary excludes the pass.)
Best regards, Vincent.
boot-architecture mailing list boot-architecture@lists.linaro.org https://lists.linaro.org/mailman/listinfo/boot-architecture