Hello Alan,
When you boot with Uefi. 1. first get into EBL and run devicepaths command.* VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage. * matches with the displayed in the list. 2. If it doesnt match, please change it to the corresponding name displayed. It has to boot after this change.
regards Girish K S
2011/8/12 Alan Chuang Alan.Chuang@arm.com
Hi all:****
I just started to play around with ARM UEFI stuff and has issuebooting into Linux when trying to test the EDK2 software on Qemu. This seems like the right place to ask. I followed the instruction in ( http://edk2.svn.sourceforge.net/viewvc/edk2/trunk/edk2/BeagleBoardPkg/readme...) including downloading the specific version of binaries / tools. When trying to run UEFI (both in NOR flash method as well as SD card method), UEFI started successfully. However, I kept on getting “Did not find Linux kernel” error when trying to boot Linux. From EBL, I can see the zImage file is present (cd fs1:; dir). The zImage file is basically vmlinuz-2.6.35-1008-linaro-omap from the hwpack. I even tried to extract zImage from uImage, but the result is still the same.****
I am wondering if anyone has run into the same issue and can giveme a hint on what else to try.****
Thanks,****
Alan Chuang****
---------------- Console Log -------------------****
The default boot selection will start in 1 seconds****
CMD0 response: 0****
MmcStatus: 18000****
CMD5 fails. Not an SDIO card.****
CMD8 success. CMD8 response: 1CE****
Card is SD2.0****
CMD55 success. CMD55 response: 120****
SD card detected. ACMD41 OCR: C0FFFF00****
High capacity card.****
CMD2 response: EF006219 1DEADBE 454D5521 AA585951****
CMD3 response: RCA 4567****
CMD9 response: A400000 FFF7F80 5B590000 400E0032****
Card type: 4, BlockSize: 200, NumBlocks: 400000****
MaxDataTransferRate: 0x32, Frequency: 25000 KHz, ClockFrequencySelect: 4** **
SD Memory Card set to 4-bit mode****
SD Card Media Change on Handle 0x8792E290****
SD Card ReinstallProtocolInterface ()****
ERROR: Did not find Linux kernel.****
[1] Linux from SD****
-VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1**** - Arguments: ****[2] EBL****
[3] Boot Manager****
Start: 3****
[1] Add Boot Device Entry****
[2] Update Boot Device Entry****
[3] Remove Boot Device Entry****
[4] Return to main menu****
Choice: 2****
[1] Linux from SD****
-VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- Arguments: ****Update entry: 1****
File path of the EFI Application or the kernel: zImage****
Has FDT support? [y/n] n****
Arguments to pass to the binary: ****
Description for this new Entry: Linux from SD****
[1] Add Boot Device Entry****
[2] Update Boot Device Entry****
[3] Remove Boot Device Entry****
[4] Return to main menu****
Choice: 4****
[1] Linux from SD****
-VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1**** - Arguments: ****[2] EBL****
[3] Boot Manager****
Start: 2****
EhcCreateUsb2Hc: capability length 0****
EhcDriverBindingStart: failed to create USB2_HC****
add-symbol-file /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll 0x85BCD240****
Embedded Boot Loader (EBL) prototype. Built at 09:56:17 on Aug 12 2011****
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN 'AS IS' BASIS,****
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.****
Please send feedback to edk2-devel@lists.sourceforge.net****
BeagleEdk2 >device****
Firmware Volume Devices:****
fv0: 0x80008000 - 0x80087FFF : 0x00080000****
fv1: 0x87C4A000 - 0x87E0751F : 0x001BD520****
File System Devices:****
fs0: SemihostFs:****
fs1: boot:****
Block IO Devices:****
blk0: Size = 0x10000000****
blk1: Removable Size = 0x80000000****
blk2: fs1: Removable Partition Size = 0x33F8000****
blk3: Removable Partition Size = 0x7CC00000****
BeagleEdk2 >devicepaths****
EhcCreateUsb2Hc: capability length 0****
EhcDriverBindingStart: failed to create USB2_HC****
[0x87A00790] MemoryMapped(0xB,0x80008000,0x80087FFF)****
[0x87A00490] MemoryMapped(0xB,0x87C4A000,0x87E0751F)****
[0x87975B10] VenHw(6696936D-3637-467C-87CB-14EA8248948C)/Uart(115200,8,N,1)
[0x8796B910] VenHw(4D00EF14-C4E0-426B-81B7-30A00A14AAD6)****
[0x8792E290] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)****
[0x8792D390] PciRoot(0x0)/Pci(0x0,0x0)****
[0x87918890] VenHw(C5B9C74A-6D72-4719-99AB-C59F199091EB)****
[0x8790A890] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)
[0x8790A590] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(2,MBR,0x00000000,0x1A000,0x3E6000)
BeagleEdk2 >exit****
remove-symbol-file /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll 0x85BCD240****
[1] Linux from SD****
-VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
- LoaderType: 1**** - Arguments: ****[2] EBL****
[3] Boot Manager****
Start:****
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
boot-architecture mailing list boot-architecture@lists.linaro.org http://lists.linaro.org/mailman/listinfo/boot-architecture