On Sat, 3 Oct 2020 at 13:16, François Ozog francois.ozog@linaro.org wrote:
Le sam. 3 oct. 2020 à 13:14, François Ozog francois.ozog@linaro.org a écrit :
Le sam. 3 oct. 2020 à 10:51, Heinrich Schuchardt xypron.glpk@gmx.de a écrit :
Hello Ilias, hello Christian,
with commit ec80b4735a59 ("efi_loader: Implement FileLoad2 for initramfs
loading") Ilias provided the possibility to specify a device path
(CONFIG_EFI_INITRD_FILESPEC) from which an initial RAM disk can be
served via the EFI_FILE_LOAD2_PROTOCOL.
Ard extended the Linux EFI stub to allow loading the initial RAM disk
via the EFI_FILE_LOAD2_PROTOCOL with the utmost priority.
With commit ecc7fdaa9ef1 ("bootm: Add a bootm command for type
IH_OS_EFI") Cristian enabled signed FIT images that contain a device
tree and a UEFI binary (enabled by CONFIG_BOOTM_EFI=y).
In the DTE calls we have discussed that it is unfortunate that we do not
have a method to validate initial RAM images in the UEFI context.
To me it would look like a good path forward to combine the two ideas:
Let the signed FIT image (of type IH_OS_EFI) contain a RAM disk
Pass location and size to the UEFI subsystem and serve them via
the EFI_FILE_LOAD2_PROTOCOL.
We could also extend the bootefi command to be callable as
bootefi $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
like the booti command to serve an initial RAM disk.
What are your thoughts?
that looks super interesting. I propose something (in the latest desk preparing oct 14th) similar except the an efi application boots the FIT. I view UEFI as booting a PE coff and pass a set of config tables. Today we have DTB, we could just add Initrd (you command line). Bootefi would be responsible to valide the containing FIT before pushing initrd (and dTB?)into the table. It would be the responsibility of the efi stub to get the initrd from the config table (GUID to be defined).
the memory attributes of the initrd config table should be such that it can be recovered for normal use. That may be tricky though.
The purpose of the EFI_FILE_LOAD2_PROTOCOL based initrd loading mechanism is to allow the EFI stub (which is tightly coupled to the kernel arch/version/etc) to allocate the memory for the initrd, and pass it into the LoadFile2() request, using whichever policy it wants to adhere to for alignment, offset and/or vicinity of the kernel image. It also ensures that any measurement performed by the bootloader for attestation or authentication can be delayed to the point where the booting kernel assumes ownership of the initrd contents, preventing potential TOCTOU issues where intermediate boot stages are involved (shim+grub etc)
Creating an initrd config table would mean that the bootloader decides where to load the initrd in memory, and only passes the address and size. This is exactly what we wanted to avoid, because now, the bootloader has to know all these different rules that vary between kernel version, configurations and architectures.
For uboot's implementation of FIT based EFI_FILE_LOAD2_PROTOCOL, this might mean that the initrd is loaded into memory first, and copied to another location (and [re-]authenticated) when LoadFile2() is invoked. I don't think this is a problem in the general case, but we might think about ways to avoid this if this turns out to be a problem for memory constrained devices with huge initrds.