> From: Deepak Saxena <dsaxena(a)linaro.org>
> Date: 12 November 2013 07:25
> Subject: Running Linaro toolchain on ubuntu 13.10 x86_64
> To: Linaro Dev <linaro-dev(a)lists.linaro.org>
>
>
> I'm working on getting my new build system up and running and with
> 13.10. Running any of our toolchain commands leads to "No such file or
> directory". I'm guessing this has to with my system being x86_64 and
> 13.10 no longer including ia32_libs package, but could be incorrect.
Yip. This is due to lack of /lib/ld-linux.so.2 which is included in 32-bit libc.
> If this is indeed the issue, my understanding is that I need to
> manually install 32 bit versions of every library that's needed. Can
> toolchain folks comment on this? Any possibility of getting 64 bit
Yip. You have to manually install 32 bit versions of every library
that's needed.
> native binaries or just having a repository that we can install from
> and thus auto-pull the dependent 32 bit libraries?
We need support both 32-bit and 64-bit systems. Ubuntu is not the only
Linux host we want to support. We also support Debian, Fedora,
openSUSE and RHEL.
Thanks!
-Zhenqiang
Hi,
I am trying to cross compile a package wi the following steps. The build
goes fine except that when I try to run the same on the foundation model it
doesn't work. Here are all the steps in details:
1. Installed the linaro gcc and set up the environment as follows:
------------------------------------------------------------------------------------------------
export
AARCH64_TOOLCHAIN=/home/anilss/Linaro/tools/gcc-linaro-aarch64-linux-gnu-4.7-2013.04-20130415_linux/bin
export PATH=$PATH:$AARCH64_TOOLCHAIN
export ARCH=aarch64
export CROSS_COMPILE=aarch64-linux-gnu-
2. Now on my build machine (x86_64 machine running linux), from source root
of the package (i.e. GMP) I want to cross compile:
anilss@anilss:~/Linaro/pkgs/gmp/cross_arm64/gmp-5.1.3-aarch64$./configure
--build=coreisbr-unknown-linux-gnu --host=aarch64-linux-gnu
--target=aarch64-linux-gnu
anilss@anilss:~/Linaro/pkgs/gmp/cross_arm64/gmp-5.1.3-aarch64$make
3. Then On the foundation model, where the above source tree is mounted, I
do:
$ make check
However this fails.
Any ideas on what is going wrong..?
Also is the triplet correct for host and foundation model (running oe
linux)?
Thanks and Regards,
Anil
I'm working on getting my new build system up and running and with
13.10. Running any of our toolchain commands leads to "No such file or
directory". I'm guessing this has to with my system being x86_64 and
13.10 no longer including ia32_libs package, but could be incorrect.
If this is indeed the issue, my understanding is that I need to
manually install 32 bit versions of every library that's needed. Can
toolchain folks comment on this? Any possibility of getting 64 bit
native binaries or just having a repository that we can install from
and thus auto-pull the dependent 32 bit libraries?
Thanks,
~Deepak
--
Deepak Saxena - Kernel Working Group Lead
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
it works with Linaro Uboot (Samsung LT Uboot branch)
------- Original Message -------
Sender : Tushar Behera<tushar.behera(a)linaro.org>
Date : Nov 08, 2013 14:39 (GMT+05:30)
Title : Re: arndale ethernet not working on u-boot
On 8 November 2013 13:44, Daniel Lezcano <daniel.lezcano(a)linaro.org> wrote:
>
> Hi all,
>
> I have an arndale and I am trying to have the ethernet working in u-boot but
> without success.
>
> (Re)start USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 2 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> scanning usb for ethernet devices... 0 Ethernet Device(s) found
>
> I found different bugs in launchpad but without this solved.
>
> I tried different u-boot but without success.
>
> Did someone faced this issue and solved it ?
>
> Thanks
>
> -- Daniel
>
We have observed the issue with upstream u-boot, but haven't got any
solution to this problem yet.
--
Tushar Behera
<p> </p><p> </p>
Hi all,
I have an arndale and I am trying to have the ethernet working in u-boot
but without success.
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
I found different bugs in launchpad but without this solved.
I tried different u-boot but without success.
Did someone faced this issue and solved it ?
Thanks
-- Daniel
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog