linaro-dev September 2017

linaro-dev@lists.linaro.org

3 participants
2 discussions

Second Ubuntu Artful Aardvark test rebuild

by Matthias Klose

The second test rebuild of Artful Aardvark was started on September 22 for all architectures, all components (main component and seeded packages finished, unseeded packages still building). For arm64 and armhf the gcc-6 and gcc-7 packages are based on the Linaro 6-2017.09 snapshots. Results (please also look at the superseded builds) can be found at http://qa.ubuntuwire.org/ftbfs/rebuilds/test-rebuild-20170922-artful.html The test rebuild uses the release pocket only, without packages from the proposed pocket. Additional build failures for packages in artful-proposed (not yet in artful) can be found at http://qa.ubuntuwire.com/ftbfs/ Please help fixing the build failures. Information about transitioning to GCC 7 can be found at: * https://gcc.gnu.org/gcc-7/porting_to.html * https://wiki.debian.org/GCC7 * Please forward patches for GCC 7 build failures to the bug reports already filed in Debian (see the above wiki page for the bug list). Matthias

5 years, 12 months

[PM-QA] question about thermal

by Xiang Dai

Hi! I test with below two cpu to test: - Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz With below action: make -C cpuidle cpuidle_killer make -C thermal run_tests It shows several thermal zone and cooling device on my machine. But there will be following err in the test suite. And need your help 1. in thermal_01: There is not 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone0'. Is this caused by hw or drives? Or may I change kernel config to meet it? 2. in thermal_03 and thermal_06: It will says glmark2 not found... It seems my machine doesn't have some devices or features. I want to know which kind of machine could meet the need. 3. in thermal_04: there will be err when checking colling devices with "effective cool=-1000". It looks like an illegal value passed in. If it could be OK on some other machine. It should be caused by some feature of my machine. Could we abandon some case by pass some parameter in? 4. in thermal_05: can't find cpufreq in colling devices. Could this fixed by some operation on kernel? the log shows below. Thanks for your help. ``` make: Entering directory '/lkp/benchmarks/pm-qa/thermal' ### ### thermal_00: ### list existing thermal-zones and cooling-devices in the system ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#therma… ### Thermal Zone list ----------------- thermal_zone0 - x86_pkg_temp thermal_zone1 - x86_pkg_temp Cooling Device list ------------------- cooling_device0 - Processor cooling_device1 - Processor cooling_device10 - Processor cooling_device11 - Processor ... ### ### thermal_01: ### test/verify the thermal zone files are present in the sysfs and check the validity of the mode field, bindings and trip temperatures ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/P… ### thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Err thermal_01.0: checking 'mode' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Err thermal_01.0: checking thermal_zone0 cur_mode=... Err thermal_01.0: checking thermal_zone1 cur_mode=... Err thermal_01.1: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.2: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.3: checking 'thermal_zone0'/'trip_point_0_temp' ='0'... Err thermal_01.4: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.5: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone0'... Ok thermal_01.6: checking 'thermal_zone0'/'trip_point_1_temp' ='0'... Err thermal_01.7: checking 'trip_point_0_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.8: checking 'trip_point_0_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.9: checking 'thermal_zone1'/'trip_point_0_temp' ='0'... Err thermal_01.10: checking 'trip_point_1_temp' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok thermal_01.11: checking 'trip_point_1_type' exists in '/sys/devices/virtual/thermal/thermal_zone1'... Ok checking thermal_01.12: checking 'thermal_zone1'/'trip_point_1_temp' ='0'... Err ... thermal_02: pass ### ### thermal_03: ### test/verify that temperature is increasing/decreasing as the load is increased/decreased ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/P… ### thermal_03.0: glmark2 not found... skip thermal_03: skip ### ### thermal_04: ### test/verify the cooling device are lowering the temperature down ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/P… ### thermal_04.0: checking cooling_device0:state=1 effective cool=-2000 ... Err thermal_04.1: checking cooling_device0:state=2 effective cool=1000 ... Ok thermal_04.2: checking cooling_device0:state=3 effective cool=3000 ... Ok thermal_04.3: checking cooling_device0:state=4 effective cool=3000 ... Ok thermal_04.4: checking cooling_device0:state=5 effective cool=3000 ... Ok thermal_04.5: checking cooling_device0:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device0:state=7 effective cool=3000 ... Ok thermal_04.7: checking cooling_device0:state=8 effective cool=4000 ... Ok thermal_04.8: checking cooling_device0:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device0:state=10 effective cool=5000 ... Ok thermal_04.0: checking cooling_device1:state=1 effective cool=-1000 ... Err thermal_04.1: checking cooling_device1:state=2 effective cool=3000 ... Ok thermal_04.2: checking cooling_device1:state=3 effective cool=5000 ... Ok thermal_04.3: checking cooling_device1:state=4 effective cool=3000 ... Ok thermal_04.4: checking cooling_device1:state=5 effective cool=4000 ... Ok thermal_04.5: checking cooling_device1:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device1:state=7 effective cool=4000 ... Ok thermal_04.7: checking cooling_device1:state=8 effective cool=5000 ... Ok thermal_04.8: checking cooling_device1:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device1:state=10 effective cool=4000 ... Ok thermal_04.0: checking cooling_device10:state=1 effective cool=-2000 ... Err thermal_04.1: checking cooling_device10:state=2 effective cool=3000 ... Ok thermal_04.2: checking cooling_device10:state=3 effective cool=5000 ... Ok thermal_04.3: checking cooling_device10:state=4 effective cool=6000 ... Ok thermal_04.4: checking cooling_device10:state=5 effective cool=5000 ... Ok thermal_04.5: checking cooling_device10:state=6 effective cool=4000 ... Ok thermal_04.6: checking cooling_device10:state=7 effective cool=3000 ... Ok thermal_04.7: checking cooling_device10:state=8 effective cool=3000 ... Ok thermal_04.8: checking cooling_device10:state=9 effective cool=4000 ... Ok thermal_04.9: checking cooling_device10:state=10 effective cool=4000 ... Ok thermal_04.0: checking cooling_device11:state=1 effective cool=-2000 ... Err ... ### ### thermal_05: ### test/verify the cpufreq cooling device are clipping the frequencies ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/P… ### thermal_05.0: Cannot find cpufreq in cooling_device0...... skip thermal_05.0: Cannot find cpufreq in cooling_device1...... skip thermal_05.0: Cannot find cpufreq in cooling_device2...... skip thermal_05.0: Cannot find cpufreq in cooling_device3...... skip thermal_05.0: Cannot find cpufreq in cooling_device4...... skip thermal_05: skip ### ### thermal_06: ### test/verify that different trip points are crossed when load is maximum ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Resources/TestSuite/P… ### thermal_06.0: glmark2 not found... skip thermal_06: skip Thanks Xiang

6 years

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev September 2017