linaro-dev September 2012

linaro-dev@lists.linaro.org

84 participants
100 discussions

Booting linux-linaro-2.6.37 on Beagle Board

by Avik Sil

Hi, I tried booting linux-linaro-2.6.37 kernel on my beagle board C4. I executed following: 1. Installed linaro on a 4 GB SD card using linaro-image-tools 0.4.1 with hwpack daily snapshot hwpack_linaro-omap3_20110125-0_armel_supported.tar.gz and linaro-natty-headless-tar-20101202-1.tar.gz. It was booting properly on my BB. 2. Cloned linux-linaro-2.6.37. Changed to source directory 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig (enabled EARLY_PRINTK) 5. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage 6. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules 7. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install INSTALL_MOD_PATH=/media/rootfs 8. cp arch/arm/boot/uImage /media/boot; sync Everything went on smoothly. Then I put the SD card on BB and powered it on. I got a kernel panic: http://paste.ubuntu.com/560562 Please help me figuring out the problem. Is it because I didn't create uInitrd? If so, then how to create it for ARM? Regards, Avik

11 years, 3 months

[PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5)

by Stefano Stabellini

Hi all, this patch series implements Xen support for ARMv7 with virtualization extensions. It allows a Linux guest to boot as dom0 and as domU on Xen on ARM. PV console, disk and network frontends and backends are all working correctly. It has been tested on a Versatile Express Cortex A15 emulator, using the latest Xen ARM developement branch (git://xenbits.xen.org/people/ianc/xen-unstable.git arm-for-4.3) plus the "ARM hypercall ABI: 64 bit ready" patch series (http://marc.info/?l=xen-devel&m=134426267205408), and a simple ad-hoc tool to build guest domains (marc.info/?l=xen-devel&m=134089788016546). The patch marked with [HACK] has been dropped from this series, however you can find it here: http://marc.info/?l=linux-kernel&m=134513277823527&w=2. I am also attaching to this email the dts'es that I am currently using for dom0 and domU: vexpress-v2p-ca15-tc1.dts (that includes vexpress-v2m-rs1-rtsm.dtsi) is the dts used for dom0 and it is passed to Linux by Xen, while vexpress-virt.dts is the dts used for other domUs and it is appended in binary form to the guest kernel image. I am not sure where they are supposed to live yet, so I am just attaching them here so that people can actually try out this series if they want to. Comments are very welcome! Patch #21 "arm/v2m: initialize arch_timers even if v2m_timer is not present" touches generic ARM code and still needs to be acked/reviewed. Arnd, Russell, what do you think about this series? If you are OK with it, to whom should I submit it? Changes in v4: - rebase on 3.6-rc5; - devicetree: "xen,xen" should be last as it is less specific; - devicetree: use 2 address-cells and 2 size-cells in the reg property; - do not xs_reset_watches on dom0; - compile drivers/xen/pcpu.c only on x86; - use "+=" instead of ":=" for dom0- targets; - add a patch to update the MAINTAINERS file. Changes in v3: - move patches that have been picked up by Konrad at the end of the series; - improve comments; - add a doc to describe the Xen Device Tree format; - do not use xen_ulong_t for multicalls and apic_physbase; - add a patch at the end of the series to use the new __HVC macro; - add missing pvclock-abi.h include to ia64 header files; - do not use an anonymous union in struct xen_add_to_physmap. Changes in v2: - fix up many comments and commit messages; - remove the early_printk patches: rely on the emulated serial for now; - remove the xen_guest_init patch: without any PV early_printk, we don't need any early call to xen_guest_init, we can rely on core_initcall alone; - define an HYPERCALL macro for 5 arguments hypercall wrappers, even if at the moment is unused; - use ldm instead of pop in the hypercall wrappers; - return -ENOSYS rather than -1 from the unimplemented grant_table functions; - remove the pvclock ifdef in the Xen headers; - remove include linux/types.h from xen/interface/xen.h; - replace pr_info with pr_debug in xen_guest_init; - add a new patch to introduce xen_ulong_t and use it top replace all the occurences of unsigned long in the public Xen interface; - explicitely size all the pointers to 64 bit on ARM, so that the hypercall ABI is "64 bit ready"; - clean up xenbus_init; - make pci.o depend on CONFIG_PCI and acpi.o depend on CONFIG_ACPI; - mark Xen guest support on ARM as EXPERIMENTAL; - introduce GRANT_TABLE_PHYSADDR; - remove unneeded initialization of boot_max_nr_grant_frames; - add a new patch to clear IRQ_NOAUTOEN and IRQ_NOREQUEST in events.c; - return -EINVAL from xen_remap_domain_mfn_range if auto_translated_physmap; - retain binary compatibility in xen_add_to_physmap: use a union to introduce foreign_domid. Shortlog and diffstat: Stefano Stabellini (24): arm: initial Xen support xen/arm: hypercalls xen/arm: page.h definitions xen/arm: sync_bitops xen/arm: empty implementation of grant_table arch specific functions docs: Xen ARM DT bindings xen/arm: Xen detection and shared_info page mapping xen/arm: Introduce xen_pfn_t for pfn and mfn types xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: compile and run xenbus xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: introduce CONFIG_XEN on ARM xen/arm: get privilege status xen/arm: initialize grant_table on ARM xen/arm: receive Xen events on ARM xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen: allow privcmd for HVM guests xen/arm: compile blkfront and blkback xen/arm: compile netback arm/v2m: initialize arch_timers even if v2m_timer is not present xen: missing includes xen: update xen_add_to_physmap interface MAINTAINERS: add myself as Xen ARM maintainer Documentation/devicetree/bindings/arm/xen.txt | 22 ++++ MAINTAINERS | 7 + arch/arm/Kconfig | 10 ++ arch/arm/Makefile | 1 + arch/arm/include/asm/hypervisor.h | 6 + arch/arm/include/asm/sync_bitops.h | 27 ++++ arch/arm/include/asm/xen/events.h | 18 +++ arch/arm/include/asm/xen/hypercall.h | 69 ++++++++++ arch/arm/include/asm/xen/hypervisor.h | 19 +++ arch/arm/include/asm/xen/interface.h | 73 +++++++++++ arch/arm/include/asm/xen/page.h | 82 ++++++++++++ arch/arm/mach-vexpress/v2m.c | 11 +- arch/arm/xen/Makefile | 1 + arch/arm/xen/enlighten.c | 168 +++++++++++++++++++++++++ arch/arm/xen/grant-table.c | 53 ++++++++ arch/arm/xen/hypercall.S | 106 ++++++++++++++++ arch/ia64/include/asm/xen/interface.h | 8 +- arch/x86/include/asm/xen/interface.h | 8 ++ arch/x86/xen/enlighten.c | 1 + arch/x86/xen/irq.c | 1 + arch/x86/xen/mmu.c | 3 + arch/x86/xen/xen-ops.h | 1 - drivers/block/xen-blkback/blkback.c | 1 + drivers/net/xen-netback/netback.c | 1 + drivers/net/xen-netfront.c | 1 + drivers/tty/hvc/hvc_xen.c | 2 + drivers/xen/Makefile | 13 ++- drivers/xen/events.c | 18 +++- drivers/xen/grant-table.c | 1 + drivers/xen/privcmd.c | 4 - drivers/xen/xenbus/xenbus_comms.c | 2 +- drivers/xen/xenbus/xenbus_probe.c | 62 +++++++--- drivers/xen/xenbus/xenbus_probe_frontend.c | 1 + drivers/xen/xenbus/xenbus_xs.c | 3 +- include/xen/events.h | 2 + include/xen/interface/features.h | 3 + include/xen/interface/grant_table.h | 4 +- include/xen/interface/io/protocols.h | 3 + include/xen/interface/memory.h | 21 ++-- include/xen/interface/physdev.h | 2 +- include/xen/interface/platform.h | 4 +- include/xen/interface/version.h | 2 +- include/xen/interface/xen.h | 7 +- include/xen/privcmd.h | 3 +- include/xen/xen.h | 2 +- 45 files changed, 796 insertions(+), 61 deletions(-) A branch based on 3.6-rc5 is available here: git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 3.6-rc5-arm-4 Cheers, Stefano

11 years, 3 months

[PATCH v3 00/23] Introduce Xen support on ARM

by Stefano Stabellini

Hi all, this patch series implements Xen support for ARMv7 with virtualization extensions. It allows a Linux guest to boot as dom0 and as domU on Xen on ARM. PV console, disk and network frontends and backends are all working correctly. It has been tested on a Versatile Express Cortex A15 emulator, using the latest Xen ARM developement branch (git://xenbits.xen.org/people/ianc/xen-unstable.git arm-for-4.3) plus the "ARM hypercall ABI: 64 bit ready" patch series (http://marc.info/?l=xen-devel&m=134426267205408), and a simple ad-hoc tool to build guest domains (marc.info/?l=xen-devel&m=134089788016546). The patch marked with [HACK] shouldn't be applied and is part of the series only because it is needed to create domUs. I am also attaching to this email the dts'es that I am currently using for dom0 and domU: vexpress-v2p-ca15-tc1.dts (that includes vexpress-v2m-rs1-rtsm.dtsi) is the dts used for dom0 and it is passed to Linux by Xen, while vexpress-virt.dts is the dts used for other domUs and it is appended in binary form to the guest kernel image. I am not sure where they are supposed to live yet, so I am just attaching them here so that people can actually try out this series if they want to. Comments are very welcome! Changes in v3: - move patches that have been picked up by Konrad at the end of the series; - improve comments; - add a doc to describe the Xen Device Tree format; - do not use xen_ulong_t for multicalls and apic_physbase; - add a patch at the end of the series to use the new __HVC macro; - add missing pvclock-abi.h include to ia64 header files; - do not use an anonymous union in struct xen_add_to_physmap. Changes in v2: - fix up many comments and commit messages; - remove the early_printk patches: rely on the emulated serial for now; - remove the xen_guest_init patch: without any PV early_printk, we don't need any early call to xen_guest_init, we can rely on core_initcall alone; - define an HYPERCALL macro for 5 arguments hypercall wrappers, even if at the moment is unused; - use ldm instead of pop in the hypercall wrappers; - return -ENOSYS rather than -1 from the unimplemented grant_table functions; - remove the pvclock ifdef in the Xen headers; - remove include linux/types.h from xen/interface/xen.h; - replace pr_info with pr_debug in xen_guest_init; - add a new patch to introduce xen_ulong_t and use it top replace all the occurences of unsigned long in the public Xen interface; - explicitely size all the pointers to 64 bit on ARM, so that the hypercall ABI is "64 bit ready"; - clean up xenbus_init; - make pci.o depend on CONFIG_PCI and acpi.o depend on CONFIG_ACPI; - mark Xen guest support on ARM as EXPERIMENTAL; - introduce GRANT_TABLE_PHYSADDR; - remove unneeded initialization of boot_max_nr_grant_frames; - add a new patch to clear IRQ_NOAUTOEN and IRQ_NOREQUEST in events.c; - return -EINVAL from xen_remap_domain_mfn_range if auto_translated_physmap; - retain binary compatibility in xen_add_to_physmap: use a union to introduce foreign_domid. Ian Campbell (1): [HACK] xen/arm: implement xen_remap_domain_mfn_range Stefano Stabellini (24): arm: initial Xen support xen/arm: hypercalls xen/arm: page.h definitions xen/arm: sync_bitops xen/arm: empty implementation of grant_table arch specific functions docs: Xen ARM DT bindings xen/arm: Xen detection and shared_info page mapping xen/arm: Introduce xen_pfn_t for pfn and mfn types xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: compile and run xenbus xen: do not compile manage, balloon, pci, acpi and cpu_hotplug on ARM xen/arm: introduce CONFIG_XEN on ARM xen/arm: get privilege status xen/arm: initialize grant_table on ARM xen/arm: receive Xen events on ARM xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen: allow privcmd for HVM guests xen/arm: compile blkfront and blkback xen/arm: compile netback arm/v2m: initialize arch_timers even if v2m_timer is not present xen/arm: use the __HVC macro xen: missing includes xen: update xen_add_to_physmap interface Documentation/devicetree/bindings/arm/xen.txt | 22 +++ arch/arm/Kconfig | 10 + arch/arm/Makefile | 1 + arch/arm/include/asm/hypervisor.h | 6 + arch/arm/include/asm/sync_bitops.h | 27 +++ arch/arm/include/asm/xen/events.h | 18 ++ arch/arm/include/asm/xen/hypercall.h | 69 +++++++ arch/arm/include/asm/xen/hypervisor.h | 19 ++ arch/arm/include/asm/xen/interface.h | 73 ++++++++ arch/arm/include/asm/xen/page.h | 82 ++++++++ arch/arm/mach-vexpress/v2m.c | 11 +- arch/arm/xen/Makefile | 1 + arch/arm/xen/enlighten.c | 245 +++++++++++++++++++++++++ arch/arm/xen/grant-table.c | 53 ++++++ arch/arm/xen/hypercall.S | 102 ++++++++++ arch/ia64/include/asm/xen/interface.h | 8 +- arch/x86/include/asm/xen/interface.h | 8 + arch/x86/xen/enlighten.c | 1 + arch/x86/xen/irq.c | 1 + arch/x86/xen/mmu.c | 3 + arch/x86/xen/xen-ops.h | 1 - drivers/block/xen-blkback/blkback.c | 1 + drivers/net/xen-netback/netback.c | 1 + drivers/net/xen-netfront.c | 1 + drivers/tty/hvc/hvc_xen.c | 2 + drivers/xen/Makefile | 11 +- drivers/xen/events.c | 18 ++- drivers/xen/grant-table.c | 1 + drivers/xen/privcmd.c | 20 +- drivers/xen/xenbus/xenbus_comms.c | 2 +- drivers/xen/xenbus/xenbus_probe.c | 62 +++++-- drivers/xen/xenbus/xenbus_probe_frontend.c | 1 + drivers/xen/xenbus/xenbus_xs.c | 1 + drivers/xen/xenfs/super.c | 7 + include/xen/events.h | 2 + include/xen/interface/features.h | 3 + include/xen/interface/grant_table.h | 4 +- include/xen/interface/io/protocols.h | 3 + include/xen/interface/memory.h | 32 ++- include/xen/interface/physdev.h | 2 +- include/xen/interface/platform.h | 4 +- include/xen/interface/version.h | 2 +- include/xen/interface/xen.h | 7 +- include/xen/privcmd.h | 3 +- include/xen/xen.h | 2 +- 45 files changed, 885 insertions(+), 68 deletions(-) A branch based on 3.5-rc7 is available here (the __HVC patch is missing from this branch because it depends on "ARM: opcodes: Facilitate custom opcode injection" http://marc.info/?l=linux-arm-kernel&m=134442896128124): git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 3.5-rc7-arm-3 Cheers, Stefano

11 years, 5 months

[PATCH V2 0/3] Create sched_select_cpu() and use it in workqueues

by Viresh Kumar

Hi All, This is V2 of my sched_select_cpu() work. In order to save power, it would be useful to schedule work onto non-IDLE cpus instead of waking up an IDLE one. To achieve this, we need scheduler to guide kernel frameworks (like: timers & workqueues) on which is the most preferred CPU that must be used for these tasks. This patchset is about implementing this concept. - The first patch adds sched_select_cpu() routine which returns the preferred cpu which is non-idle. - Second patch removes idle_cpu() calls from timer & hrtimer. - Third patch is about adapting this change in workqueue framework. Earlier discussions over v1 can be found here: http://www.mail-archive.com/linaro-dev@lists.linaro.org/msg13342.html Earlier discussions over this concept were done at last LPC: http://summit.linuxplumbersconf.org/lpc-2012/meeting/90/lpc2012-sched-timer… Module created for testing this behavior is present here: http://git.linaro.org/gitweb?p=people/vireshk/module.git;a=summary Following are the steps followed in test module: 1. Run single work on each cpu 2. This work will start a timer after x (tested with 10) jiffies of delay 3. Timer routine queues a work... (This may be called from idle or non-idle cpu) and starts the same timer again STEP 3 is done for n number of times (i.e. queuing n works, one after other) 4. All works will call a single routine, which will count following per cpu: - Total works processed by a CPU - Total works processed by a CPU, which are queued from it - Total works processed by a CPU, which aren't queued from it Setup: ----- - ARM Vexpress TC2 - big.LITTLE CPU - Core 0-1: A15, 2-4: A7 - rootfs: linaro-ubuntu-nano Results: ------- Without Workqueue Modification, i.e. PATCH 3/3: [ 2493.022335] Workqueue Analyser: works processsed by CPU0, Total: 1000, Own: 0, migrated: 0 [ 2493.047789] Workqueue Analyser: works processsed by CPU1, Total: 1000, Own: 0, migrated: 0 [ 2493.072918] Workqueue Analyser: works processsed by CPU2, Total: 1000, Own: 0, migrated: 0 [ 2493.098576] Workqueue Analyser: works processsed by CPU3, Total: 1000, Own: 0, migrated: 0 [ 2493.123702] Workqueue Analyser: works processsed by CPU4, Total: 1000, Own: 0, migrated: 0 With Workqueue Modification, i.e. PATCH 3/3: [ 2493.022335] Workqueue Analyser: works processsed by CPU0, Total: 1002, Own: 999, migrated: 3 [ 2493.047789] Workqueue Analyser: works processsed by CPU1, Total: 998, Own: 997, migrated: 1 [ 2493.072918] Workqueue Analyser: works processsed by CPU2, Total: 1013, Own: 996, migrated: 17 [ 2493.098576] Workqueue Analyser: works processsed by CPU3, Total: 998, Own: 993, migrated: 5 [ 2493.123702] Workqueue Analyser: works processsed by CPU4, Total: 989, Own: 987, migrated: 2 V1->V2 ----- - New SD_* macros removed now and earlier ones used - sched_select_cpu() rewritten and it includes the check on current cpu's idleness. - cpu_idle() calls from timer and hrtimer removed now. - Patch 2/3 from V1, removed as it doesn't apply to latest workqueue branch from tejun. - CONFIG_MIGRATE_WQ removed and so is wq_select_cpu() - sched_select_cpu() called only from __queue_work() - got tejun/for-3.7 branch in my tree, before making workqueue changes. Viresh Kumar (3): sched: Create sched_select_cpu() to give preferred CPU for power saving timer: hrtimer: Don't check idle_cpu() before calling get_nohz_timer_target() workqueue: Schedule work on non-idle cpu instead of current one include/linux/sched.h | 16 ++++++++++-- kernel/hrtimer.c | 2 +- kernel/sched/core.c | 69 +++++++++++++++++++++++++++++++-------------------- kernel/timer.c | 9 ++++--- kernel/workqueue.c | 2 +- 5 files changed, 63 insertions(+), 35 deletions(-) -- 1.7.12.rc2.18.g61b472e

11 years, 5 months

[RFC PATCH 00/10] sched: Task placement for heterogeneous MP systems

by morten.rasmussen＠arm.com

From: Morten Rasmussen <morten.rasmussen(a)arm.com> Hi Paul, Paul, Peter, Suresh, linaro-sched-sig, and LKML, As a follow-up on my Linux Plumbers Conference talk about my experiments with scheduling on heterogeneous systems I'm posting a proof-of-concept patch set with my modifications. The intention behind the modifications is to tweak scheduling behaviour to only use fast (and power hungry) cores when it is necessary and also improve performance consistency. Without the modifications it is more or less random where tasks are scheduled and so is the execution time. I'm seeing good improvements on performance consistency for web browsing on Android using Bbench <http://www.gem5.org/Bbench> on the ARM big.LITTLE TC2 chip, which has two fast cores (Cortex-A15) and three power-efficient cores (Cortex-A7). The total execution time numbers below are for Androids SurfaceFlinger process is key for page rendering performance. The average execution time is lower with the patches enabled and the standard deviation is much smaller. Similar improvements can be seen for the Android.Browser and WebViewCoreThread processes. Total execution time statistics based on 50 runs. SurfaceFlinger SMP kernel [s] HMP modifications [s] ------------------------------------------------------ Average 14.617 11.012 St. Dev. 4.577 0.902 10% Pctl. 9.343 10.783 90% Pctl. 18.743 11.695 Unfortunately, I cannot share power-efficiency numbers at this stage. This patch set introduces proof-of-concept scheduler modifications which attempt to improve scheduling decisions on heterogeneous multi-processor systems (HMP) such as ARM big.LITTLE systems. The patch set relies on the entity load-tracking re-work patch set by Paul Turner: <https://lkml.org/lkml/2012/8/23/267> The modifications attempt to migrate tasks between cores with different compute capacity depending on the tracked load and priority. The aim is to only use fast cores for tasks which really need the extra performance and thereby improve power consumption by running everything else on the slow cores. The patch introduces hmp_domains to represent the different types of cores that are available on the given platform. Multiple (>2) hmp_domains is supported but not tested. hmp_domains must be set up by platform code and the patch set includes patches for ARM platforms using device-tree. The patches intentionally try to avoid modifying the existing code paths as much as possible. The aim is to experiment with HMP scheduling and get the overall policy right before integrating it properly with the existing load-balancer. Morten Morten Rasmussen (10): sched: entity load-tracking load_avg_ratio sched: Task placement for heterogeneous systems based on task load-tracking sched: Forced task migration on heterogeneous systems sched: Introduce priority-based task migration filter ARM: Add HMP scheduling support for ARM architecture ARM: sched: Use device-tree to provide fast/slow CPU list for HMP ARM: sched: Setup SCHED_HMP domains sched: Add ftrace events for entity load-tracking sched: Add HMP task migration ftrace event sched: SCHED_HMP multi-domain task migration control arch/arm/Kconfig | 46 +++++ arch/arm/include/asm/topology.h | 32 +++ arch/arm/kernel/topology.c | 91 ++++++++ include/linux/sched.h | 11 + include/trace/events/sched.h | 153 ++++++++++++++ kernel/sched/core.c | 4 + kernel/sched/fair.c | 434 ++++++++++++++++++++++++++++++++++++++- kernel/sched/sched.h | 9 + 8 files changed, 779 insertions(+), 1 deletion(-) -- 1.7.9.5

11 years, 5 months

[GIT PULL] bit-LITTLE-MP-v7

by Viresh Kumar

Hi Andrey, Below is pull request for v7 of MP work, you can skip v6-resend pull request that i sent yesterday. Following are the main changes: - Based on v3.6-rc3 - per-task-load-average updated with v3 - applied Tixy's patch from fast-slow-cpu-dt-v1 to task-placement-v1 as they are somewhat related only. And so removed fast-slow-cpu-dt-v1 branch NOTE: Compile tested only -- viresh --------------->8----------------------------- The following changes since commit fea7a08acb13524b47711625eebea40a0ede69a0: Linux 3.6-rc3 (2012-08-22 13:29:06 -0700) are available in the git repository at: git://git.linaro.org/arm/big.LITTLE/mp.git big-LITTLE-MP-v7 for you to fetch changes up to 549b2d49de89f9454a933a32efb5825a076efd42: Merge branches 'per-cpu-thread-hotplug-v3-fixed', 'task-placement-v1', 'cpu-hotplug-get_online_cpus-v1', 'arm-asymmetric-support-v3-v3.6-rc1' and 'config-fragments' into big-LITTLE-MP-v7 (2012-08-24 09:24:14 +0530) ---------------------------------------------------------------- Ben Segall (1): sched: maintain per-rq runnable averages Jon Medhurst (6): configs: Initial core configs configs: Make CONFIG_MODULES part of linaro-base Merge branch 'config-core-3.4' into config-core-tracking configs: Replace CONFIG_PERF_COUNTERS with CONFIG_PERF_EVENTS configs: android: Enable FB_EARLYSUSPEND configs: android: Enable CONFIG_INPUT_UINPUT to get aidb working Jon Medhurst (Tixy) (1): sched: Use device-tree to provide fast/slow CPU list for HMP Morten Rasmussen (6): sched: Add ftrace events for entity load-tracking sched: entity load-tracking load_avg_ratio sched: load-tracking driven wakeup migration for HMP platforms sched: Forced migration of high load task on HMP platforms sched: Add HMP forced task migration ftrace event sched: Add missing cpus_allowed checks to HMP scheduler Paul E. McKenney (2): rcu: Use smp_hotplug_thread facility for RCUs per-CPU kthread hotplug: Fix UP bug in smpboot hotplug code Paul Turner (15): sched: track the runnable average on a per-task entitiy basis sched: aggregate load contributed by task entities on parenting cfs_rq sched: maintain the load contribution of blocked entities sched: add an rq migration call-back to sched_class sched: account for blocked load waking back up sched: aggregate total task_group load sched: compute load contribution by a group entity sched: normalize tg load contributions against runnable time sched: maintain runnable averages across throttled periods sched: replace update_shares weight distribution with per-entity computation sched: refactor update_shares_cpu() -> update_blocked_avgs() sched: update_cfs_shares at period edge sched: make __update_entity_runnable_avg() fast sched: implement usage tracking sched: introduce temporary FAIR_GROUP_SCHED dependency for load-tracking Ricardo Salveti de Araujo (8): configs: moving previous ubuntu.conf as ubuntu-minimal and creating a full ubuntu one configs: ubuntu: be compatible with the enforce script configs: ubuntu: disabling CODA_FS, seems to be broken atm configs: ubuntu: disabling CGROUPS as default Merge branch 'config-core-3.4' into config-core-tracking configs: ubuntu: updating configs for 3.5 configs: ubuntu: disabling CONFIG_MTD_NAND_NANDSIM=m, breaking build config: ubuntu: ATH6KL should be platform dependent Silas Boyd-Wickizer (4): Use get_online_cpus to avoid races involving CPU hotplug Use get_online_cpus to avoid races involving CPU hotplug Use get_online_cpus to avoid races involving CPU hotplug Use get_online_cpus to avoid races involving CPU hotplug Thomas Gleixner (6): rcu: Yield simpler kthread: Implement park/unpark facility smpboot: Provide infrastructure for percpu hotplug threads softirq: Use hotplug thread infrastructure watchdog: Use hotplug thread infrastructure infiniband: ehca: Use hotplug thread infrastructure Vincent Guittot (1): sched: cpu_power: enable ARCH_POWER Viresh Kumar (3): configs: Add config fragments for big LITTLE MP linaro/configs: Update big LITTLE MP fragment for task placement work Merge branches 'per-cpu-thread-hotplug-v3-fixed', 'task-placement-v1', 'cpu-hotplug-get_online_cpus-v1', 'arm-asymmetric-support-v3-v3.6-rc1' and 'config-fragments' into big-LITTLE-MP-v7 arch/arm/Kconfig | 29 + arch/arm/kernel/topology.c | 69 ++ arch/x86/kernel/cpuid.c | 5 + arch/x86/kernel/msr.c | 5 + drivers/hwmon/coretemp.c | 5 + drivers/hwmon/via-cputemp.c | 5 + drivers/infiniband/hw/ehca/ehca_irq.c | 253 ++-- drivers/infiniband/hw/ehca/ehca_irq.h | 6 +- include/linux/kthread.h | 11 +- include/linux/sched.h | 24 + include/linux/smpboot.h | 43 + include/trace/events/sched.h | 151 +++ kernel/Makefile | 3 +- kernel/cpu.c | 10 +- kernel/kthread.c | 185 ++- kernel/rcutree.c | 12 +- kernel/rcutree.h | 15 +- kernel/rcutree_plugin.h | 403 ++----- kernel/rcutree_trace.c | 3 +- kernel/sched/core.c | 11 + kernel/sched/debug.c | 39 +- kernel/sched/fair.c | 1111 ++++++++++++++--- kernel/sched/features.h | 2 +- kernel/sched/sched.h | 60 +- kernel/smpboot.c | 233 ++++ kernel/smpboot.h | 4 + kernel/softirq.c | 108 +- kernel/watchdog.c | 263 ++-- linaro/configs/android.conf | 33 + linaro/configs/big-LITTLE-MP.conf | 9 + linaro/configs/linaro-base.conf | 84 ++ linaro/configs/ubuntu-minimal.conf | 24 + linaro/configs/ubuntu.conf | 2133 +++++++++++++++++++++++++++++++++ 33 files changed, 4355 insertions(+), 996 deletions(-) create mode 100644 include/linux/smpboot.h create mode 100644 linaro/configs/android.conf create mode 100644 linaro/configs/big-LITTLE-MP.conf create mode 100644 linaro/configs/linaro-base.conf create mode 100644 linaro/configs/ubuntu-minimal.conf create mode 100644 linaro/configs/ubuntu.conf

11 years, 6 months

ARM A9 oprofile

by Dmitry Antipov

Hello Ming, could you please give some pointers to observe an overall status of oprofile support on ARM A9 cores? IIUC, now it doesn't work without oprofile.timer=1 kernel option, at least for Linus' tree; searching gives a lot of discussion/patches fragments and similar stuff, but I was unable to find a complete patch/git tree/whatever else to try. Thanks in advance, Dmitry

11 years, 6 months

[PATCH][RESEND] power: opp: rcu reclaim

by Vincent Guittot

synchronize_rcu blocks the caller of opp_enable/disbale for a complete grace period. This blocking duration prevents any intensive use of the functions. Replace synchronize_rcu by call_rcu which will call our function for freeing the old opp element. The duration of opp_enable and opp_disable will be no more dependant of the grace period. Signed-off-by: Vincent Guittot <vincent.guittot(a)linaro.org> --- drivers/base/power/opp.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index ac993ea..49e4626 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -64,6 +64,7 @@ struct opp { unsigned long u_volt; struct device_opp *dev_opp; + struct rcu_head head; }; /** @@ -441,6 +442,17 @@ int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) } /** + * opp_free_rcu() - helper to clear the struct opp when grace period has + * elapsed without blocking the the caller of opp_set_availability + */ +static void opp_free_rcu(struct rcu_head *head) +{ + struct opp *opp = container_of(head, struct opp, head); + + kfree(opp); +} + +/** * opp_set_availability() - helper to set the availability of an opp * @dev: device for which we do this operation * @freq: OPP frequency to modify availability @@ -511,7 +523,7 @@ static int opp_set_availability(struct device *dev, unsigned long freq, list_replace_rcu(&opp->node, &new_opp->node); mutex_unlock(&dev_opp_list_lock); - synchronize_rcu(); + call_rcu(&opp->head, opp_free_rcu); /* Notify the change of the OPP availability */ if (availability_req) @@ -521,13 +533,10 @@ static int opp_set_availability(struct device *dev, unsigned long freq, srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE, new_opp); - /* clean up old opp */ - new_opp = opp; - goto out; + return 0; unlock: mutex_unlock(&dev_opp_list_lock); -out: kfree(new_opp); return r; } -- 1.7.9.5

11 years, 6 months

[PATCH 0/4] cpuidle - support multiple drivers at a time

by Daniel Lezcano

The discussion about having different cpus on the system with different latencies bring us to a first attemp by adding a pointer in the cpuidle_device to the states array. But as Rafael suggested, it would make more sense to create a driver per cpu [1]. This patch adds support for multiple cpuidle drivers. It creates a per cpu cpuidle driver pointer. In order to not break the different drivers, the function cpuidle_register_driver assign for each cpu, the driver. The multiple driver support is optional and if it is not set, the cpuide driver core code remains the same (except some code reorganisation). I did the following tests compiled, booted, tested without/with CONFIG_CPU_IDLE, with/without CONFIG_CPU_IDLE_MULTIPLE_DRIVERS. Tested on Core2 Duo T9500 with acpi_idle [and intel_idle] Tested on ARM Dual Cortex-A9 U8500 (aka Snowball) [1] http://www.spinics.net/lists/linux-acpi/msg37921.html Daniel Lezcano (4): cpuidle : move driver's refcount to cpuidle cpuidle : move driver checking within the lock section cpuidle - prepare the driver core to be multi drivers aware cpuidle - support multiple drivers drivers/cpuidle/Kconfig | 9 ++ drivers/cpuidle/cpuidle.c | 24 ++++-- drivers/cpuidle/driver.c | 194 ++++++++++++++++++++++++++++++++++++++------- drivers/cpuidle/sysfs.c | 50 +++++++++--- include/linux/cpuidle.h | 9 ++- 5 files changed, 238 insertions(+), 48 deletions(-) -- 1.7.5.4

11 years, 6 months

[PATCH 0/3] bootwrapper: Add support for big.LITTLE models

by Jon Medhurst (Tixy)

This mostly boils down to initialising the Cache Coherent Interconnect (CCI). We do this by looking in the device-tree for a CCI node, that way the same semihosting bootwrapper binary can be used on both the big.LITTLE models and on the A15 models which don't have a CCI. [PATCH 1/3] bootwrapper: Allow for multiple clusters in boot CPU [PATCH 2/3] bootwrapper: Factor out parsing of fdt #address-cells [PATCH 3/3] bootwrapper: Initialise CCI device if found in the fdt boot.S | 2 +- semi_loader.c | 104 +++++++++++++++++++++++++++++++++++++++++----------- 2 files changed, 84 insertions(+), 22 deletions(-)

11 years, 6 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev September 2012