Howdy folks,
I'm Kelley Spoon (aka The New Guy in Systems), and I'm sending you this
email to let you know that the "Reply By Email" feature has been enabled
on all of our Gerrit servers.
You can now post change messages, inline comments, and file comments for
a project by simply replying to the email Gerrit sends out whenever a
new change has been submitted for review.
More information and some examples of how to use this feature can be
found at:
https://review.linaro.org/Documentation/intro-user.html#reply-by-email
Please let me know if you experience any problems using it or have any
questions.
--
Kelley Spoon <kelley.spoon(a)linaro.org>
Hi
I am trying to set static ip on my board (eth0 which is shown in the output
of ifconfig).
I edited the /etc/network/interfaces to this, and rebooted my board.
=====================
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.30
gateway 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
=====================
but the baord still get ip from dhcp. How I can resolve this problem?
this is the linux I am using:
Linux 4.4.0-linaro-lt-qcom #2 SMP PREEMPT Wed Feb 24 15:41:26 UTC 2016
armv7l GNU/Linux
Thanks
I installed linaro ubuntu from https://releases.linaro.org/
ubuntu/boards/snapdragon/latest/ on my board, Inforce6410PLUS by the
following commands.I did not install anything else on the board:
sudo fastboot flash boot
boot-qcom-apq8064-ifc6410-qcom-snapdragon-20151026-139.img
sudo fastboot flash cache firmware-qcom-snapdragon-20151026-139.img
sudo fastboot flash -S 768M userdata
linaro-vivid-developer-qcom-snapdragon-20151026-139.img
the problem is that linux does not show Ethernet or wlan0 as the output of
ifconfig.
I did "modprobe -r ath6kl_sdio" then "modprobe ath6kl_sdio" but nothing
changed.
How can I solve the problem?
Hello All,
We will have downtime on the 24/02/2018.
This server will stop processing jobs on the 23/02/2018 at around
23:00 UTC, as the server will be put into "Shutdown mode".
Start: 10/02/2018 09:00 UTC
End: 10/02/2018 11:00 UTC
Regards
Ben
Hello All,
We will have downtime on the 10/02/2018, whilst we install some new SSD's.
Start: 10/02/2018 08:00 UTC
End: 10/02/2018 14:00 UTC
If you have any concerns please let me know.
Regards
Ben
