Hi, Shawn,
On Mon, Mar 7, 2011 at 10:51 PM, Shawn Guo shawn.guo@freescale.com wrote:
Aha, Jason. Grant and I put many comments on v1 of this patch, but it seems that v2 is identical to v1, except adding Rob Herring sign-off.
Please compare with v1 and say it once again, It should include the grant and your comments except the mxctty1 due to I think that it's not one issue, So, I did not take your comments.
But I observed that some comments as Grant suggest to use decimal not hex value for #address-cells and #size-cells, not applied to this file globally, I will fix it in the V3 patch if need.
On Mon, Mar 07, 2011 at 09:05:59PM +0800, Jason Liu wrote:
Signed-off-by: Jason Liu r64343@freescale.com Singed-off-by: Rob Herring robherring2@gmail.com
arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 110 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/babbage.dts b/arch/arm/boot/dts/babbage.dts new file mode 100644 index 0000000..46a3071 --- /dev/null +++ b/arch/arm/boot/dts/babbage.dts @@ -0,0 +1,110 @@ +/dts-v1/;
+/ {
- model = "Freescale i.MX51 Babbage";
- compatible = "fsl,mx51-babbage";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- #interrupt-cells = <0x1>;
- interrupt-parent = <&tzic>;
- memory {
- reg = <0x90000000 0x20000000>;
- };
- chosen {
- bootargs = "console=ttymxc1,115200n8 debug earlyprintk";
- };
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
- tzic: tzic@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- reg = <0xe0000000 0x1000>;
- compatible = "fsl,imx51-tzic";
- };
- };
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- uart0_clk: uart@0 {
- compatible = "clock";
- clock-outputs = "imx-uart.0";
- };
- uart1_clk: uart@1 {
- compatible = "clock";
- clock-outputs = "imx-uart.1";
- };
- uart2_clk: uart@2 {
- compatible = "clock";
- clock-outputs = "imx-uart.2";
- };
- fec_clk: fec@0 {
- compatible = "clock";
- clock-outputs = "fec.0";
- };
- };
- spba@70000000 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "simple-bus";
- ranges = <0x0 0x70000000 0x100000>;
- imx-uart@c000 {
- compatible = "imx-uart";
- reg = <0xc000 0x1000>;
- interrupts = <0x21>;
- rts-cts;
- uart-clock = <&uart2_clk>, "uart";
- };
- };
- aips@73f00000 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "simple-bus";
- ranges = <0x0 0x73f00000 0x100000>;
- imx-uart@bc000 {
- compatible = "imx-uart";
- reg = <0xbc000 0x1000>;
- interrupts = <0x1f>;
- rts-cts;
- uart-clock = <&uart0_clk>, "uart";
- };
- imx-uart@c0000 {
- compatible = "imx-uart";
- reg = <0xc0000 0x1000>;
- interrupts = <0x20>;
- rts-cts;
- uart-clock = <&uart1_clk>, "uart";
- };
- };
- aips@83f00000 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "simple-bus";
- ranges = <0x0 0x83f00000 0x100000>;
- fec@ec000 {
- compatible = "fec";
- reg = <0xec000 0x1000>;
- interrupts = <0x57>;
- fec_clk-clock = <&fec_clk>, "fec";
- };
- };
+};
1.7.0.4
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
-- Regards, Shawn